static void test_empty_crbug_458524(skiatest::Reporter* reporter) {
SkRRect rr;
const SkRect bounds = { 3709, 3709, 3709 + 7402, 3709 + 29825 };
const SkScalar rad = 40;
rr.setRectXY(bounds, rad, rad);
SkRRect other;
SkMatrix matrix;
matrix.setScale(0, 1);
rr.transform(matrix, &other);
REPORTER_ASSERT(reporter, SkRRect::kEmpty_Type == other.getType());
}
static void test_empty_crbug_458524(skiatest::Reporter* reporter) {
SkRRect rr;
const SkRect bounds = { 3709, 3709, 3709 + 7402, 3709 + 29825 };
const SkScalar rad = 40;
rr.setRectXY(bounds, rad, rad);
path_contains_rrect_check(reporter, rr);
SkRRect other;
SkMatrix matrix;
matrix.setScale(0, 1);
rr.transform(matrix, &other);
path_contains_rrect_check(reporter, rr);
}
// Called for a matrix that should cause SkRRect::transform to fail.
static void assert_transform_failure(skiatest::Reporter* reporter, const SkRRect& orig,
const SkMatrix& matrix) {
// The test depends on the fact that the original is not empty.
SkASSERT(!orig.isEmpty());
SkRRect dst;
dst.setEmpty();
const SkRRect copyOfDst = dst;
const SkRRect copyOfOrig = orig;
bool success = orig.transform(matrix, &dst);
// This transform should fail.
REPORTER_ASSERT(reporter, !success);
// Since the transform failed, dst should be unchanged.
REPORTER_ASSERT(reporter, copyOfDst == dst);
// original should not be modified.
REPORTER_ASSERT(reporter, copyOfOrig == orig);
REPORTER_ASSERT(reporter, orig != dst);
}
// Test out the case where an oval already off in space is translated/scaled
// further off into space - yielding numerical issues when the rect & radii
// are transformed separatly
// BUG=skia:2696
static void test_issue_2696(skiatest::Reporter* reporter) {
SkRRect rrect;
SkRect r = { 28443.8594f, 53.1428604f, 28446.7148f, 56.0000038f };
rrect.setOval(r);
SkMatrix xform;
xform.setAll(2.44f, 0.0f, 485411.7f,
0.0f, 2.44f, -438.7f,
0.0f, 0.0f, 1.0f);
SkRRect dst;
bool success = rrect.transform(xform, &dst);
REPORTER_ASSERT(reporter, success);
SkScalar halfWidth = SkScalarHalf(dst.width());
SkScalar halfHeight = SkScalarHalf(dst.height());
for (int i = 0; i < 4; ++i) {
REPORTER_ASSERT(reporter,
SkScalarNearlyEqual(dst.radii((SkRRect::Corner)i).fX, halfWidth));
REPORTER_ASSERT(reporter,
SkScalarNearlyEqual(dst.radii((SkRRect::Corner)i).fY, halfHeight));
}
}
// Called to test various transforms on a single SkRRect.
static void test_transform_helper(skiatest::Reporter* reporter, const SkRRect& orig) {
SkRRect dst;
dst.setEmpty();
// The identity matrix will duplicate the rrect.
bool success = orig.transform(SkMatrix::I(), &dst);
REPORTER_ASSERT(reporter, success);
REPORTER_ASSERT(reporter, orig == dst);
// Skew and Perspective make transform fail.
SkMatrix matrix;
matrix.reset();
matrix.setSkewX(SkIntToScalar(2));
assert_transform_failure(reporter, orig, matrix);
matrix.reset();
matrix.setSkewY(SkIntToScalar(3));
assert_transform_failure(reporter, orig, matrix);
matrix.reset();
matrix.setPerspX(4);
assert_transform_failure(reporter, orig, matrix);
matrix.reset();
matrix.setPerspY(5);
assert_transform_failure(reporter, orig, matrix);
// Rotation fails.
matrix.reset();
matrix.setRotate(SkIntToScalar(90));
assert_transform_failure(reporter, orig, matrix);
matrix.setRotate(SkIntToScalar(37));
assert_transform_failure(reporter, orig, matrix);
// Translate will keep the rect moved, but otherwise the same.
matrix.reset();
SkScalar translateX = SkIntToScalar(32);
SkScalar translateY = SkIntToScalar(15);
matrix.setTranslateX(translateX);
matrix.setTranslateY(translateY);
dst.setEmpty();
success = orig.transform(matrix, &dst);
REPORTER_ASSERT(reporter, success);
for (int i = 0; i < 4; ++i) {
REPORTER_ASSERT(reporter,
orig.radii((SkRRect::Corner) i) == dst.radii((SkRRect::Corner) i));
}
REPORTER_ASSERT(reporter, orig.rect().width() == dst.rect().width());
REPORTER_ASSERT(reporter, orig.rect().height() == dst.rect().height());
REPORTER_ASSERT(reporter, dst.rect().left() == orig.rect().left() + translateX);
REPORTER_ASSERT(reporter, dst.rect().top() == orig.rect().top() + translateY);
// Keeping the translation, but adding skew will make transform fail.
matrix.setSkewY(SkIntToScalar(7));
assert_transform_failure(reporter, orig, matrix);
// Scaling in -x will flip the round rect horizontally.
matrix.reset();
matrix.setScaleX(SkIntToScalar(-1));
dst.setEmpty();
success = orig.transform(matrix, &dst);
REPORTER_ASSERT(reporter, success);
{
GET_RADII;
// Radii have swapped in x.
REPORTER_ASSERT(reporter, origUL == dstUR);
REPORTER_ASSERT(reporter, origUR == dstUL);
REPORTER_ASSERT(reporter, origLR == dstLL);
REPORTER_ASSERT(reporter, origLL == dstLR);
}
// Width and height remain the same.
REPORTER_ASSERT(reporter, orig.rect().width() == dst.rect().width());
REPORTER_ASSERT(reporter, orig.rect().height() == dst.rect().height());
// Right and left have swapped (sort of)
REPORTER_ASSERT(reporter, orig.rect().right() == -dst.rect().left());
// Top has stayed the same.
REPORTER_ASSERT(reporter, orig.rect().top() == dst.rect().top());
// Keeping the scale, but adding a persp will make transform fail.
matrix.setPerspX(7);
assert_transform_failure(reporter, orig, matrix);
// Scaling in -y will flip the round rect vertically.
matrix.reset();
matrix.setScaleY(SkIntToScalar(-1));
dst.setEmpty();
success = orig.transform(matrix, &dst);
REPORTER_ASSERT(reporter, success);
{
GET_RADII;
// Radii have swapped in y.
REPORTER_ASSERT(reporter, origUL == dstLL);
REPORTER_ASSERT(reporter, origUR == dstLR);
REPORTER_ASSERT(reporter, origLR == dstUR);
REPORTER_ASSERT(reporter, origLL == dstUL);
}
// Width and height remain the same.
REPORTER_ASSERT(reporter, orig.rect().width() == dst.rect().width());
REPORTER_ASSERT(reporter, orig.rect().height() == dst.rect().height());
// Top and bottom have swapped (sort of)
REPORTER_ASSERT(reporter, orig.rect().top() == -dst.rect().bottom());
// Left has stayed the same.
REPORTER_ASSERT(reporter, orig.rect().left() == dst.rect().left());
// Scaling in -x and -y will swap in both directions.
matrix.reset();
matrix.setScaleY(SkIntToScalar(-1));
matrix.setScaleX(SkIntToScalar(-1));
dst.setEmpty();
success = orig.transform(matrix, &dst);
REPORTER_ASSERT(reporter, success);
{
GET_RADII;
REPORTER_ASSERT(reporter, origUL == dstLR);
REPORTER_ASSERT(reporter, origUR == dstLL);
REPORTER_ASSERT(reporter, origLR == dstUL);
REPORTER_ASSERT(reporter, origLL == dstUR);
}
// Width and height remain the same.
REPORTER_ASSERT(reporter, orig.rect().width() == dst.rect().width());
REPORTER_ASSERT(reporter, orig.rect().height() == dst.rect().height());
REPORTER_ASSERT(reporter, orig.rect().top() == -dst.rect().bottom());
REPORTER_ASSERT(reporter, orig.rect().right() == -dst.rect().left());
// Scale in both directions.
SkScalar xScale = SkIntToScalar(3);
SkScalar yScale = 3.2f;
matrix.reset();
matrix.setScaleX(xScale);
matrix.setScaleY(yScale);
dst.setEmpty();
success = orig.transform(matrix, &dst);
REPORTER_ASSERT(reporter, success);
// Radii are scaled.
for (int i = 0; i < 4; ++i) {
REPORTER_ASSERT(reporter, SkScalarNearlyEqual(dst.radii((SkRRect::Corner) i).fX,
SkScalarMul(orig.radii((SkRRect::Corner) i).fX, xScale)));
REPORTER_ASSERT(reporter, SkScalarNearlyEqual(dst.radii((SkRRect::Corner) i).fY,
SkScalarMul(orig.radii((SkRRect::Corner) i).fY, yScale)));
}
REPORTER_ASSERT(reporter, SkScalarNearlyEqual(dst.rect().width(),
SkScalarMul(orig.rect().width(), xScale)));
REPORTER_ASSERT(reporter, SkScalarNearlyEqual(dst.rect().height(),
SkScalarMul(orig.rect().height(), yScale)));
REPORTER_ASSERT(reporter, SkScalarNearlyEqual(dst.rect().left(),
SkScalarMul(orig.rect().left(), xScale)));
REPORTER_ASSERT(reporter, SkScalarNearlyEqual(dst.rect().top(),
SkScalarMul(orig.rect().top(), yScale)));
}
