/* Initialize the drawing of a segment of type other than trace.
*/
DRAWSEGMENT* PCB_EDIT_FRAME::Begin_DrawSegment( DRAWSEGMENT* Segment, STROKE_T shape, wxDC* DC )
{
int lineWidth;
DRAWSEGMENT* DrawItem;
lineWidth = GetDesignSettings().GetLineThickness( GetActiveLayer() );
if( Segment == NULL ) // Create new segment.
{
SetCurItem( Segment = new DRAWSEGMENT( GetBoard() ) );
Segment->SetFlags( IS_NEW );
Segment->SetLayer( GetActiveLayer() );
Segment->SetWidth( lineWidth );
Segment->SetShape( shape );
Segment->SetAngle( 900 );
Segment->SetStart( GetCrossHairPosition() );
Segment->SetEnd( GetCrossHairPosition() );
m_canvas->SetMouseCapture( DrawSegment, Abort_EditEdge );
}
else
{
// The ending point coordinate Segment->m_End was updated by the function
// DrawSegment() called on a move mouse event during the segment creation
if( Segment->GetStart() != Segment->GetEnd() )
{
if( Segment->GetShape() == S_SEGMENT )
{
SaveCopyInUndoList( Segment, UR_NEW );
GetBoard()->Add( Segment );
OnModify();
Segment->ClearFlags();
Segment->Draw( m_canvas, DC, GR_OR );
DrawItem = Segment;
SetCurItem( Segment = new DRAWSEGMENT( GetBoard() ) );
Segment->SetFlags( IS_NEW );
Segment->SetLayer( DrawItem->GetLayer() );
Segment->SetWidth( lineWidth );
Segment->SetShape( DrawItem->GetShape() );
Segment->SetType( DrawItem->GetType() );
Segment->SetAngle( DrawItem->GetAngle() );
Segment->SetStart( DrawItem->GetEnd() );
Segment->SetEnd( DrawItem->GetEnd() );
DrawSegment( m_canvas, DC, wxDefaultPosition, false );
}
else
{
End_Edge( Segment, DC );
Segment = NULL;
}
}
}
return Segment;
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
m_parent->SaveCopyInUndoList( m_Item, UR_CHANGED );
wxString msg;
if( m_DC )
m_Item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );
msg = m_Center_StartXCtrl->GetValue();
m_Item->SetStartX( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_Center_StartYCtrl->GetValue();
m_Item->SetStartY( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_EndX_Radius_Ctrl->GetValue();
m_Item->SetEndX( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_EndY_Ctrl->GetValue();
m_Item->SetEndY( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_ThicknessCtrl->GetValue();
m_Item->SetWidth( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() );
m_Item->SetLayer( m_LayerSelectionCtrl->GetCurrentSelection() + FIRST_NO_COPPER_LAYER);
if( m_Item->GetLayer() == EDGE_N )
m_brdSettings.m_EdgeSegmentWidth = thickness;
else
m_brdSettings.m_DrawSegmentWidth = thickness;
if( m_Item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360(angle);
m_Item->SetAngle( angle );
}
m_parent->OnModify();
if( m_DC )
m_Item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );
m_Item->DisplayInfo( m_parent );
m_parent->SetDesignSettings( m_brdSettings );
Close( true );
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
{
if( !itemValuesOK() )
return;
m_parent->SaveCopyInUndoList( m_item, UR_CHANGED );
wxString msg;
if( m_DC )
m_item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );
msg = m_Center_StartXCtrl->GetValue();
m_item->SetStartX( ValueFromString( g_UserUnit, msg ) );
msg = m_Center_StartYCtrl->GetValue();
m_item->SetStartY( ValueFromString( g_UserUnit, msg ) );
msg = m_EndX_Radius_Ctrl->GetValue();
m_item->SetEndX( ValueFromString( g_UserUnit, msg ) );
msg = m_EndY_Ctrl->GetValue();
m_item->SetEndY( ValueFromString( g_UserUnit, msg ) );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_item->SetLayer( ToLAYER_ID( m_LayerSelectionCtrl->GetLayerSelection() ) );
if( m_item->GetLayer() == Edge_Cuts )
m_brdSettings.m_EdgeSegmentWidth = thickness;
else
m_brdSettings.m_DrawSegmentWidth = thickness;
if( m_item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360( angle );
m_item->SetAngle( angle );
}
m_parent->OnModify();
if( m_DC )
m_item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );
m_parent->SetMsgPanel( m_item );
m_parent->SetDesignSettings( m_brdSettings );
Close( true );
}
bool DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataFromWindow()
{
if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataFromWindow() )
return false;
m_parent->SaveCopyInUndoList( m_item, UR_CHANGED );
wxString msg;
if( m_DC )
m_item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );
msg = m_Center_StartXCtrl->GetValue();
m_item->SetStartX( ValueFromString( g_UserUnit, msg ) );
msg = m_Center_StartYCtrl->GetValue();
m_item->SetStartY( ValueFromString( g_UserUnit, msg ) );
msg = m_EndX_Radius_Ctrl->GetValue();
m_item->SetEndX( ValueFromString( g_UserUnit, msg ) );
msg = m_EndY_Ctrl->GetValue();
m_item->SetEndY( ValueFromString( g_UserUnit, msg ) );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_item->SetLayer( ToLAYER_ID( m_LayerSelectionCtrl->GetLayerSelection() ) );
if( m_item->GetLayer() == Edge_Cuts )
m_brdSettings.m_EdgeSegmentWidth = thickness;
else
m_brdSettings.m_DrawSegmentWidth = thickness;
if( m_item->GetShape() == S_ARC )
{
m_item->SetAngle( m_AngleValue * 10.0 );
}
m_parent->OnModify();
if( m_DC )
m_item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );
m_parent->SetMsgPanel( m_item );
m_parent->SetDesignSettings( m_brdSettings );
return true;
}
/* Creates the section $BOARD.
* We output here only the board perimeter
*/
static void CreateBoardSection( FILE* aFile, BOARD* aPcb )
{
fputs( "$BOARD\n", aFile );
// Extract the board edges
for( EDA_ITEM* drawing = aPcb->m_Drawings; drawing != 0;
drawing = drawing->Next() )
{
if( drawing->Type() == PCB_LINE_T )
{
DRAWSEGMENT* drawseg = static_cast<DRAWSEGMENT*>( drawing );
if( drawseg->GetLayer() == Edge_Cuts )
{
// XXX GenCAD supports arc boundaries but I've seen nothing that reads them
fprintf( aFile, "LINE %g %g %g %g\n",
MapXTo( drawseg->GetStart().x ), MapYTo( drawseg->GetStart().y ),
MapXTo( drawseg->GetEnd().x ), MapYTo( drawseg->GetEnd().y ) );
}
}
}
fputs( "$ENDBOARD\n\n", aFile );
}
int genPlacementRoutingMatrix( BOARD* aBrd, EDA_MSG_PANEL* messagePanel )
{
wxString msg;
RoutingMatrix.UnInitRoutingMatrix();
EDA_RECT bbox = aBrd->ComputeBoundingBox( true );
if( bbox.GetWidth() == 0 || bbox.GetHeight() == 0 )
{
DisplayError( NULL, _( "No PCB edge found, unknown board size!" ) );
return 0;
}
RoutingMatrix.ComputeMatrixSize( aBrd, true );
int nbCells = RoutingMatrix.m_Ncols * RoutingMatrix.m_Nrows;
messagePanel->EraseMsgBox();
msg.Printf( wxT( "%d" ), RoutingMatrix.m_Ncols );
messagePanel->SetMessage( 1, _( "Cols" ), msg, GREEN );
msg.Printf( wxT( "%d" ), RoutingMatrix.m_Nrows );
messagePanel->SetMessage( 7, _( "Lines" ), msg, GREEN );
msg.Printf( wxT( "%d" ), nbCells );
messagePanel->SetMessage( 14, _( "Cells." ), msg, YELLOW );
// Choose the number of board sides.
RoutingMatrix.m_RoutingLayersCount = 2;
RoutingMatrix.InitRoutingMatrix();
// Display memory usage.
msg.Printf( wxT( "%d" ), RoutingMatrix.m_MemSize / 1024 );
messagePanel->SetMessage( 24, wxT( "Mem(Kb)" ), msg, CYAN );
g_Route_Layer_BOTTOM = F_Cu;
if( RoutingMatrix.m_RoutingLayersCount > 1 )
g_Route_Layer_BOTTOM = B_Cu;
g_Route_Layer_TOP = F_Cu;
// Place the edge layer segments
TRACK TmpSegm( NULL );
TmpSegm.SetLayer( UNDEFINED_LAYER );
TmpSegm.SetNetCode( -1 );
TmpSegm.SetWidth( RoutingMatrix.m_GridRouting / 2 );
EDA_ITEM* PtStruct = aBrd->m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
{
DRAWSEGMENT* DrawSegm;
switch( PtStruct->Type() )
{
case PCB_LINE_T:
DrawSegm = (DRAWSEGMENT*) PtStruct;
if( DrawSegm->GetLayer() != Edge_Cuts )
break;
TraceSegmentPcb( DrawSegm, HOLE | CELL_is_EDGE,
RoutingMatrix.m_GridRouting, WRITE_CELL );
break;
case PCB_TEXT_T:
default:
break;
}
}
// Mark cells of the routing matrix to CELL_is_ZONE
// (i.e. availlable cell to place a module )
// Init a starting point of attachment to the area.
RoutingMatrix.OrCell( RoutingMatrix.m_Nrows / 2, RoutingMatrix.m_Ncols / 2,
BOTTOM, CELL_is_ZONE );
// find and mark all other availlable cells:
for( int ii = 1; ii != 0; )
ii = propagate();
// Initialize top layer. to the same value as the bottom layer
if( RoutingMatrix.m_BoardSide[TOP] )
memcpy( RoutingMatrix.m_BoardSide[TOP], RoutingMatrix.m_BoardSide[BOTTOM],
nbCells * sizeof(MATRIX_CELL) );
return 1;
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg( )
/**************************************************************************/
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_Item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
msg << m_Item->GetAngle();
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_Item->GetStart().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_Item->GetStart().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_Item->GetEnd().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndY_Ctrl, m_Item->GetEnd().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_ThicknessCtrl, m_Item->GetWidth(),
m_parent->GetInternalUnits() );
int thickness;
if( m_Item->GetLayer() == EDGE_N )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness,
m_parent->GetInternalUnits() );
for( int layer=FIRST_NO_COPPER_LAYER; layer <= LAST_NO_COPPER_LAYER; ++layer )
{
m_LayerSelectionCtrl->Append( m_parent->GetBoard()->GetLayerName( layer ) );
}
int layer = m_Item->GetLayer();
// Control:
if ( layer < FIRST_NO_COPPER_LAYER )
layer = FIRST_NO_COPPER_LAYER;
if ( layer > LAST_NO_COPPER_LAYER )
layer = LAST_NO_COPPER_LAYER;
m_LayerSelectionCtrl->SetSelection( layer - FIRST_NO_COPPER_LAYER );
}
/**
* Function PlaceCells
* Initialize the matrix routing by setting obstacles for each occupied cell
* a cell set to HOLE is an obstacle for tracks and vias
* a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
* a cell set to CELL_is_EDGE is a frontier.
* Tracks and vias having the same net code as net_code are skipped
* (htey do not are obstacles)
*
* For single-sided Routing 1:
* BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
*
* If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
*/
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
int ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
int marge, via_marge;
LAYER_MSK layerMask;
// use the default NETCLASS?
NETCLASS* nc = aPcb->m_NetClasses.GetDefault();
int trackWidth = nc->GetTrackWidth();
int clearance = nc->GetClearance();
int viaSize = nc->GetViaDiameter();
marge = clearance + (trackWidth / 2);
via_marge = clearance + (viaSize / 2);
// Place PADS on matrix routing:
for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
{
D_PAD* pad = aPcb->GetPad( i );
if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
{
::PlacePad( pad, HOLE, marge, WRITE_CELL );
}
::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Place outlines of modules on matrix routing, if they are on a copper layer
// or on the edge layer
TRACK tmpSegm( NULL ); // A dummy track used to create segments.
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
tmpSegm.SetLayer( edge->GetLayer() );
if( tmpSegm.GetLayer() == EDGE_N )
tmpSegm.SetLayer( UNDEFINED_LAYER );
tmpSegm.SetStart( edge->GetStart() );
tmpSegm.SetEnd( edge->GetEnd() );
tmpSegm.SetShape( edge->GetShape() );
tmpSegm.SetWidth( edge->GetWidth() );
tmpSegm.m_Param = edge->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
break;
default:
break;
}
}
}
// Place board outlines and texts on copper layers:
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
{
DRAWSEGMENT* DrawSegm;
int type_cell = HOLE;
DrawSegm = (DRAWSEGMENT*) item;
tmpSegm.SetLayer( DrawSegm->GetLayer() );
if( DrawSegm->GetLayer() == EDGE_N )
{
tmpSegm.SetLayer( UNDEFINED_LAYER );
type_cell |= CELL_is_EDGE;
}
tmpSegm.SetStart( DrawSegm->GetStart() );
tmpSegm.SetEnd( DrawSegm->GetEnd() );
tmpSegm.SetShape( DrawSegm->GetShape() );
tmpSegm.SetWidth( DrawSegm->GetWidth() );
tmpSegm.m_Param = DrawSegm->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, type_cell, marge, WRITE_CELL );
}
break;
case PCB_TEXT_T:
{
TEXTE_PCB* PtText;
PtText = (TEXTE_PCB*) item;
if( PtText->GetText().Length() == 0 )
break;
EDA_RECT textbox = PtText->GetTextBox( -1 );
ux0 = textbox.GetX();
uy0 = textbox.GetY();
dx = textbox.GetWidth();
dy = textbox.GetHeight();
/* Put bounding box (rectangle) on matrix */
dx /= 2;
dy /= 2;
ux1 = ux0 + dx;
uy1 = uy0 + dy;
ux0 -= dx;
uy0 -= dy;
layerMask = GetLayerMask( PtText->GetLayer() );
TraceFilledRectangle( ux0 - marge, uy0 - marge, ux1 + marge,
uy1 + marge, PtText->GetOrientation(),
layerMask, HOLE, WRITE_CELL );
TraceFilledRectangle( ux0 - via_marge, uy0 - via_marge,
ux1 + via_marge, uy1 + via_marge,
PtText->GetOrientation(),
layerMask, VIA_IMPOSSIBLE, WRITE_OR_CELL );
}
break;
default:
break;
}
}
/* Put tracks and vias on matrix */
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( net_code == track->GetNet() )
continue;
TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
}
bool DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataToWindow()
{
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
};
for( size_t ii = 0; ii < DIM( texts_unit ); ii++ )
{
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X:" ) );
m_StartPointYLabel->SetLabel( _( "Center Y:" ) );
m_EndPointXLabel->SetLabel( _( "Point X:" ) );
m_EndPointYLabel->SetLabel( _( "Point Y:" ) );
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X:" ) );
m_StartPointYLabel->SetLabel( _( "Center Y:" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X:" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y:" ) );
m_AngleValue = m_item->GetAngle() / 10.0;
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
int thickness;
if( m_item->GetLayer() == Edge_Cuts )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::AllCuMask() );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the drawings layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( Dwgs_User );
}
return DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataToWindow();
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg()
{
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Point X" ) );
m_EndPointYLabel->SetLabel( _( "Point Y" ) );
m_Angle_Text->Show( false );
m_Angle_Ctrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );
// Here the angle is a double, but the UI is still working with integers.
msg << int( m_item->GetAngle() );
m_Angle_Ctrl->SetValue( msg );
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_Angle_Text->Show( false );
m_Angle_Ctrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
int thickness;
if( m_item->GetLayer() == Edge_Cuts )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::AllCuMask() );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the drawings layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( Dwgs_User );
}
}
