void DistroMesas::importXML(const QString val) {
QFile file ( g_confpr->value( CONF_DIR_USER ) + "distromesas_" + mainCompany()->dbName() + ".cfn" );
if (file.exists()) {
if ( !file.open ( QIODevice::ReadOnly ) ) {
return;
} // end if
QString result (file.readAll());
file.close();
QDomDocument doc ( "mydocument" );
if ( !doc.setContent ( result ) ) {
return;
} // end if
QDomElement docElem = doc.documentElement();
QDomElement principal = docElem.firstChildElement ( "BACKGROUND" );
m_background = principal.text();
principal = docElem.firstChildElement ( "ESCALA" );
g_escala = principal.text().toInt();
QDomNodeList nodos = docElem.elementsByTagName ( "MESA" );
int i = 0;
while (i < nodos.count() ) {
QDomNode ventana = nodos.item ( i++ );
QDomElement e1 = ventana.toElement(); /// try to convert the node to an element.
if ( !e1.isNull() ) { /// the node was really an element.
QString nodoText = e1.text();
/// Pasamos el XML a texto para poder procesarlo como tal.
QString result;
QTextStream stream ( &result );
ventana.save(stream,5);
Mesa *mesa = new Mesa((BtCompany *) mainCompany(), mui_widget);
mesa->importXML(result);
if (! m_listapantallas.contains(mesa->m_pantalla)) {
if (m_pantallaactual == "") {
m_pantallaactual = mesa->m_pantalla;
} // end if
m_listapantallas.append(mesa->m_pantalla);
QToolButton *but = new QToolButton(this);
but->setObjectName("p_"+mesa->m_pantalla);
but->setText(mesa->m_pantalla);
but->setMinimumHeight(42);
but->setMinimumWidth(42);
but->setCheckable(TRUE);
mui_espaciopantallas->addWidget(but);
connect(but, SIGNAL(clicked()), this, SLOT(cambiarPantalla()));
} // end if
if (mesa->m_pantalla == m_pantallaactual)
mesa->show();
} // end if
} // end while
} // end if
}
bool MachConf::read()
{
QString errorStr;
int errorLine;
int errorColumn;
QFile *device = new QFile(_fileName);
if (!device->open(QIODevice::ReadOnly))
return false;
if (!domDocument.setContent(device, true, &errorStr, &errorLine,
&errorColumn)) {
return false;
}
QDomElement root = domDocument.documentElement();
//Console *console =
//cout <<
//std::basic_ostream<<root.tagName()<<endl;
Console * console = SkyMain::getUartConsole();
DevTreeView *treeView = SkyMain::getDevTreeView();
//QDomElement child = root.firstChildElement("arch");
if(root.tagName() != "machine"){
return false;
}
else{
QDomAttr attr = root.attributeNode(QString("name"));
treeView->insertMachine(attr.value());
}
QDomElement board = root.firstChildElement("board");
//console->insertPlainText(attr.value());
console->insertPlainText("\n");
//console->insertPlainText(child);
//console->insertPlainText(QString("ljklkjkejlwer"));
/*
if (root.tagName() != "xbel") {
QMessageBox::information(window(), tr("DOM Bookmarks"),
tr("The file is not an XBEL file."));
return false;
} else if (root.hasAttribute("version")
&& root.attribute("version") != "1.0") {
QMessageBox::information(window(), tr("DOM Bookmarks"),
tr("The file is not an XBEL version 1.0 "
"file."));
return false;
}
clear();
disconnect(this, SIGNAL(itemChanged(QTreeWidgetItem *, int)),
this, SLOT(updateDomElement(QTreeWidgetItem *, int)));
QDomElement child = root.firstChildElement("folder");
while (!child.isNull()) {
parseFolderElement(child);
child = child.nextSiblingElement("folder");
}
connect(this, SIGNAL(itemChanged(QTreeWidgetItem *, int)),
this, SLOT(updateDomElement(QTreeWidgetItem *, int)));
*/
return true;
}
//---------------------------------------------------------------------------------
void
MagicRules::initialize(const QString& p_jsonFile)
{
// Read the JSON file
QString val;
QFile file;
file.setFileName(p_jsonFile);
file.open(QIODevice::ReadOnly | QIODevice::Text);
val = file.readAll();
file.close();
// Read document
QJsonParseError error;
QJsonDocument doc = QJsonDocument::fromJson(val.toUtf8(), &error);
if (error.error != QJsonParseError::NoError)
{
qCritical() << QString("Error while reading file: %1\nError: %2").arg(p_jsonFile, error.errorString());
return;
}
// Parse each magic type and add to the rules
QJsonArray magicTypesArray = doc.object().value("magic_types").toArray();
QJsonObject currentType;
MagicTypeDefinition* typeDef = 0;
MagicTypePriorityDefinition* prioDef = 0;
QJsonArray tempArray;
QJsonObject tempObject;
QJsonObject tempObject2;
for (int i = 0; i < magicTypesArray.size(); ++i)
{
currentType = magicTypesArray.at(i).toObject();
// Add type definition
typeDef = new MagicTypeDefinition();
// Translations
tempObject = currentType["translations"].toObject();
for (int j = 0; j < tempObject.keys().size(); ++j)
{
typeDef->translations[tempObject.keys().at(j)] = tempObject[tempObject.keys().at(j)].toString();
}
// Types
tempArray = currentType["types"].toArray();
for (int j = 0; j < tempArray.size(); ++j)
{
typeDef->types.push_back(tempArray.at(j).toString());
}
// Priorities
tempObject = currentType["priorities"].toObject();
for (int j = 0; j < tempObject.keys().size(); ++j)
{
tempObject2 = tempObject[tempObject.keys().at(j)].toObject();
prioDef = new MagicTypePriorityDefinition();
// Starting magic
if (tempObject2.contains("starting_magic"))
{
prioDef->startingMagic = tempObject2.value("starting_magic").toString().toInt();
}
// Free spells
if (tempObject2.contains("free_spells"))
{
prioDef->freeSpells = tempObject2.value("free_spells").toString().toInt();
}
// Free skills
if (tempObject2.contains("free_skills"))
{
prioDef->freeSkills.first = tempObject2.value("free_skills").toArray().at(0).toString().toInt();
prioDef->freeSkills.second = tempObject2.value("free_skills").toArray().at(1).toString().toInt();
}
// Forced skill group
if (tempObject2.contains("free_skill_groups"))
{
prioDef->freeSkillGroup.first = tempObject2.value("free_skill_groups").toArray().at(0).toString().toInt();
prioDef->freeSkillGroup.second = tempObject2.value("free_skill_groups").toArray().at(1).toString().toInt();
}
// Store priority
typeDef->priorities[tempObject.keys().at(j).toInt()] = prioDef;
}
// Make sure the definition doesn't already exist
if (_typeDefinitions.contains(currentType["unique_id"].toString()))
{
qCritical() << "Magic type \"" << currentType["unique_id"].toString() << "\" already exists. Parsing aborted.";
return;
}
_typeDefinitions[currentType["unique_id"].toString()] = typeDef;
}// END magic types
// Parse spell category strings
QJsonArray categoryArray = doc.object().value("spell_categories").toArray();
QJsonObject currentCat;
SpellDefinition* spellCat = NULL;
MagicAbilityDefinition* category = NULL;
MagicAbilityDefinition* abilityDef = NULL;
QString tempString;
QString uniqueId = "";
for (int i = 0; i < categoryArray.size(); ++i)
{
currentCat = categoryArray.at(i).toObject();
uniqueId = currentCat["unique_id"].toString();
// Make sure the definition doesn't already exist
if (_spellCategoryDefinitions.contains(uniqueId))
{
qCritical() << "Spell category \"" << uniqueId << "\" already exists. Parsing aborted.";
return;
}
// Get correct category
category = _rootItem->children[MAGICABILITYTYPE_SPELL];
// Add spell definition
abilityDef = new MagicAbilityDefinition(category);
abilityDef->id = uniqueId;
abilityDef->abilityType = MAGICABILITYTYPE_SPELL;
spellCat = new SpellDefinition();
abilityDef->spell = spellCat;
abilityDef->spell->isSpellCategory = true;
category->children.push_back(abilityDef);
// Translations
tempObject = currentCat["translations"].toObject();
for (int j = 0; j < tempObject.keys().size(); ++j)
{
abilityDef->translations[tempObject.keys().at(j)] = tempObject[tempObject.keys().at(j)].toString();
}
_definitions[uniqueId] = abilityDef;
_spellCategoryDefinitions[uniqueId] = spellCat;
}
// Parse each spell and add to the rules
QJsonArray spellsArray = doc.object().value("spells").toArray();
QJsonObject currentSpell;
SpellDefinition* spellDef = 0;
for (int i = 0; i < spellsArray.size(); ++i)
{
currentSpell = spellsArray.at(i).toObject();
uniqueId = currentSpell["unique_id"].toString();
// Make sure the definition doesn't already exist
if (_spellDefinitions.contains(uniqueId))
{
qCritical() << "Spell \"" << uniqueId << "\" already exists. Parsing aborted.";
return;
}
// Add spell definition
abilityDef = new MagicAbilityDefinition();
abilityDef->id = uniqueId;
abilityDef->abilityType = MAGICABILITYTYPE_SPELL;
spellDef = new SpellDefinition();
abilityDef->spell = spellDef;
// Translations
tempObject = currentSpell["translations"].toObject();
for (int j = 0; j < tempObject.keys().size(); ++j)
{
abilityDef->translations[tempObject.keys().at(j)] = tempObject[tempObject.keys().at(j)].toString();
}
// Category
spellDef->category = currentSpell["category"].toString();
if (!_spellCategoryDefinitions.contains(spellDef->category))
{
qCritical() << "Spell \"" << currentSpell["unique_id"].toString() << "\" of non existing category \""
<< spellDef->category << "\". Parsing aborted.";
return;
}
// Get correct spell category and add to it
category = _definitions[spellDef->category];
abilityDef->parent = category;
category->children.push_back(abilityDef);
// Type
tempString = currentSpell["type"].toString();
if (tempString == "P")
{
spellDef->type = SPELLTYPE_PHYSICAL;
}
else if (tempString == "M")
{
spellDef->type = SPELLTYPE_MAGICAL;
}
// Range
tempString = currentSpell["range"].toString();
if (tempString == "T")
{
spellDef->range = SPELLRANGE_TOUCH;
}
else if (tempString == "LOS")
{
spellDef->range = SPELLRANGE_LOS;
}
else if (tempString == "LOS(A)")
{
spellDef->range = SPELLRANGE_LOS_AREA;
}
// Damage (optional)
if (currentSpell.contains("damage"))
{
tempString = currentSpell["damage"].toString();
if (tempString == "P")
{
spellDef->damageType = SPELLDAMAGE_PHYSICAL;
}
else if (tempString == "M")
{
spellDef->damageType = SPELLDAMAGE_MENTAL;
}
}
// Duration
tempString = currentSpell["duration"].toString();
if (tempString == "I")
{
spellDef->duration = SPELLDURATION_INSTANT;
}
else if (tempString == "S")
{
spellDef->duration = SPELLDURATION_SUSTAINED;
}
else if (tempString == "P")
{
spellDef->duration = SPELLDURATION_PERMANENT;
}
// Drain
spellDef->drain = currentSpell["drain"].toString();
// Descriptors (optional)
if (currentSpell.contains("descriptors"))
{
QVariantList list = currentSpell["descriptors"].toArray().toVariantList();
QListIterator<QVariant> i(list);
while (i.hasNext())
{
spellDef->descriptors << i.next().toString();
}
}
// Does this spell require a custom choice?
if (currentSpell.contains("requires_custom"))
{
abilityDef->requiresCustom = currentSpell["requires_custom"].toString() == "true";
if (currentSpell.contains("custom_choices"))
{
QJsonObject obj = currentSpell["custom_choices"].toObject();
abilityDef->customChoices = new CustomChoice(&obj);
}
}
// Is this spell affected by the essence value?
if (currentSpell.contains("essence_effect"))
{
spellDef->essenceEffect = currentSpell["essence_effect"].toString() == "true";
}
_definitions[uniqueId] = abilityDef;
_spellDefinitions[uniqueId] = spellDef;
}// END spells
// Parse each adept power and add to the rules
QJsonArray powersArray = doc.object().value("adept_powers").toArray();
QJsonObject currentPower;
AdeptPowerDefinition* powerDef = 0;
for (int i = 0; i < powersArray.size(); ++i)
{
currentPower = powersArray.at(i).toObject();
uniqueId = currentPower["unique_id"].toString();
// Make sure the definition doesn't already exist
if (_adeptPowerDefinitions.contains(uniqueId))
{
qCritical() << "Adept Power \"" << uniqueId << "\" already exists. Parsing aborted.";
return;
}
// Add type definition
abilityDef = new MagicAbilityDefinition();
abilityDef->id = uniqueId;
abilityDef->abilityType = MAGICABILITYTYPE_ADEPT_POWER;
powerDef = new AdeptPowerDefinition();
abilityDef->adeptPower = powerDef;
// Get correct spell category and add to it
category = _rootItem->children[MAGICABILITYTYPE_ADEPT_POWER];
abilityDef->parent = category;
category->children.push_back(abilityDef);
// Translations
tempObject = currentPower["translations"].toObject();
for (int j = 0; j < tempObject.keys().size(); ++j)
{
abilityDef->translations[tempObject.keys().at(j)] = tempObject[tempObject.keys().at(j)].toString();
}
// Cost
if (currentPower.contains("cost_per_level"))
{
powerDef->costType = COSTTYPE_PER_LEVEL;
powerDef->costArray.push_back(currentPower["cost_per_level"].toString().toDouble());
}
else if (currentPower.contains("cost"))
{
QJsonValue::Type type = currentPower["cost"].type();
// Normal cost or array
if (type != QJsonValue::Array)
{
powerDef->costType = COSTTYPE_NORMAL;
powerDef->costArray.push_back(currentPower["cost"].toString().toDouble());
}
else
{
powerDef->costType = COSTTYPE_ARRAY;
tempArray = currentPower["cost"].toArray();
// Add each array entry
for (int j = 0; j < tempArray.size(); ++j)
{
powerDef->costArray.push_back(tempArray[j].toString().toDouble());
}
}
}
// Activation (optional)
if (currentPower.contains("activation"))
{
tempString = currentPower["activation"].toString();
if (tempString == "interrupt")
{
powerDef->activationType = ACTIVATIONTYPE_INTERRUPT;
}
else if (tempString == "free")
{
powerDef->activationType = ACTIVATIONTYPE_FREE;
}
else if (tempString == "simple")
{
powerDef->activationType = ACTIVATIONTYPE_SIMPLE;
}
}
// Does this power require a custom choice?
if (currentPower.contains("requires_custom"))
{
abilityDef->requiresCustom = currentPower["requires_custom"].toString() == "true";
if (currentPower.contains("custom_choices"))
{
QJsonObject obj = currentPower["custom_choices"].toObject();
abilityDef->customChoices = new CustomChoice(&obj);
}
}
// Does this power have effects?
if (currentPower.contains("effects"))
{
tempArray = currentPower["effects"].toArray();
for (int j = 0; j < tempArray.size(); ++j)
{
QJsonValueRef obj = tempArray[j];
EffectSource source;
source.magicAbility = abilityDef;
abilityDef->effects.push_back(new Effect(&obj, source));
}
}
_definitions[uniqueId] = abilityDef;
_adeptPowerDefinitions[uniqueId] = powerDef;
} // END adept powers
// Parse each complex form and add to the rules
QJsonArray formsArray = doc.object().value("complex_forms").toArray();
QJsonObject currentForm;
ComplexFormDefinition* formDef = 0;
for (int i = 0; i < formsArray.size(); ++i)
{
currentForm = formsArray.at(i).toObject();
uniqueId = currentForm["unique_id"].toString();
// Make sure the definition doesn't already exist
if (_complexFormDefinitions.contains(uniqueId))
{
qCritical() << "Complex Form \"" << uniqueId << "\" already exists. Parsing aborted.";
return;
}
// Add form definition
abilityDef = new MagicAbilityDefinition();
abilityDef->id = uniqueId;
abilityDef->abilityType = MAGICABILITYTYPE_COMPLEX_FORM;
formDef = new ComplexFormDefinition();
abilityDef->complexForm = formDef;
// Get correct spell category and add to it
category = _rootItem->children[MAGICABILITYTYPE_COMPLEX_FORM];
abilityDef->parent = category;
category->children.push_back(abilityDef);
// Translations
tempObject = currentForm["translations"].toObject();
for (int j = 0; j < tempObject.keys().size(); ++j)
{
abilityDef->translations[tempObject.keys().at(j)] = tempObject[tempObject.keys().at(j)].toString();
}
// Target
tempString = currentForm["target"].toString();
if (tempString == "persona")
{
formDef->targetType = TARGETTYPE_PERSONA;
}
else if (tempString == "device")
{
formDef->targetType = TARGETTYPE_DEVICE;
}
else if (tempString == "file")
{
formDef->targetType = TARGETTYPE_FILE;
}
else if (tempString == "sprite")
{
formDef->targetType = TARGETTYPE_SPRITE;
}
// Duration
tempString = currentForm["duration"].toString();
if (tempString == "I")
{
formDef->duration = SPELLDURATION_INSTANT;
}
else if (tempString == "S")
{
formDef->duration = SPELLDURATION_SUSTAINED;
}
else if (tempString == "P")
{
formDef->duration = SPELLDURATION_PERMANENT;
}
// Fading Value
formDef->fadingValue = currentForm["fading_value"].toString();
// Does this form require a custom choice?
if (currentForm.contains("requires_custom"))
{
abilityDef->requiresCustom = currentForm["requires_custom"].toString() == "true";
if (currentForm.contains("custom_choices"))
{
QJsonObject obj = currentForm["custom_choices"].toObject();
abilityDef->customChoices = new CustomChoice(&obj);
}
}
_definitions[uniqueId] = abilityDef;
_complexFormDefinitions[uniqueId] = formDef;
} // END complex forms
}
void jsBridge::dragResource(QString hash) {
Resource *res = Resource::fromHash(hash);
if (res == NULL)
return;
QString mime = res->mimeType();
QString fileName = res->getFileName();
QByteArray data = res->getData();
QPixmap pix;
if (res->isImage()) {
pix.loadFromData(data);
} else if (res->isPDF()) {
pix.load(":/img/application-pdf.png");
} else {
pix.load(":/img/application-octet-stream.png");
}
delete res;
if (fileName.isEmpty())
fileName = hash;
if (mime == "application/pdf") {
if (!fileName.endsWith(".pdf", Qt::CaseInsensitive))
fileName += ".pdf";
} else if (mime == "image/jpeg") {
if (!fileName.endsWith(".jpg", Qt::CaseInsensitive) && !fileName.endsWith(".jpeg", Qt::CaseInsensitive))
fileName += ".jpg";
} else if (mime == "image/png") {
if (!fileName.endsWith(".png", Qt::CaseInsensitive))
fileName += ".png";
} else if (mime == "image/gif") {
if (!fileName.endsWith(".gif", Qt::CaseInsensitive))
fileName += ".gif";
}
QString tmpl = QDir::tempPath() + QDir::separator() + fileName;
QFile* f = new QFile(tmpl);
if (!f->open(QIODevice::WriteOnly))
return;
f->write(data);
f->close();
files.enqueue(f);
QTimer::singleShot(60000, this, SLOT(removeTmpFile()));
QDrag *drag = new QDrag(new QWidget());
QMimeData *mimeData = new QMimeData;
QFileInfo fileInfo(tmpl);
QUrl url = QUrl::fromLocalFile(fileInfo.absoluteFilePath());
mimeData->setUrls(QList<QUrl>() << url);
drag->setMimeData(mimeData);
if (!pix.isNull())
drag->setPixmap(pix.scaled(128,128, Qt::KeepAspectRatio, Qt::SmoothTransformation));
drag->exec(Qt::CopyAction | Qt::MoveAction);
}
QString htmlizedTextPart(const QModelIndex &partIndex, const QFontInfo &font, const QColor &backgroundColor, const QColor &textColor,
const QColor &linkColor, const QColor &visitedLinkColor)
{
static const QString defaultStyle = QString::fromUtf8(
"pre{word-wrap: break-word; white-space: pre-wrap;}"
// The following line, sadly, produces a warning "QFont::setPixelSize: Pixel size <= 0 (0)".
// However, if it is not in place or if the font size is set higher, even to 0.1px, WebKit reserves space for the
// quotation characters and therefore a weird white area appears. Even width: 0px doesn't help, so it looks like
// we will have to live with this warning for the time being.
".quotemarks{color:transparent;font-size:0px;}"
// Cannot really use the :dir(rtl) selector for putting the quote indicator to the "correct" side.
// It's CSS4 and it isn't supported yet.
"blockquote{font-size:90%; margin: 4pt 0 4pt 0; padding: 0 0 0 1em; border-left: 2px solid %1; unicode-bidi: -webkit-plaintext}"
// Stop the font size from getting smaller after reaching two levels of quotes
// (ie. starting on the third level, don't make the size any smaller than what it already is)
"blockquote blockquote blockquote {font-size: 100%}"
".signature{opacity: 0.6;}"
// Dynamic quote collapsing via pure CSS, yay
"input {display: none}"
"input ~ span.full {display: block}"
"input ~ span.short {display: none}"
"input:checked ~ span.full {display: none}"
"input:checked ~ span.short {display: block}"
"label {border: 1px solid %2; border-radius: 5px; padding: 0px 4px 0px 4px; white-space: nowrap}"
// BLACK UP-POINTING SMALL TRIANGLE (U+25B4)
// BLACK DOWN-POINTING SMALL TRIANGLE (U+25BE)
"span.full > blockquote > label:before {content: \"\u25b4\"}"
"span.short > blockquote > label:after {content: \" \u25be\"}"
"span.shortquote > blockquote > label {display: none}"
);
QString fontSpecification(QStringLiteral("pre{"));
if (font.italic())
fontSpecification += QLatin1String("font-style: italic; ");
if (font.bold())
fontSpecification += QLatin1String("font-weight: bold; ");
fontSpecification += QStringLiteral("font-size: %1px; font-family: \"%2\", monospace }").arg(
QString::number(font.pixelSize()), font.family());
QString textColors = QString::fromUtf8("body { background-color: %1; color: %2 }"
"a:link { color: %3 } a:visited { color: %4 } a:hover { color: %3 }").arg(
backgroundColor.name(), textColor.name(), linkColor.name(), visitedLinkColor.name());
// looks like there's no special color for hovered links in Qt
// build stylesheet and html header
QColor tintForQuoteIndicator = backgroundColor;
tintForQuoteIndicator.setAlpha(0x66);
static QString stylesheet = defaultStyle.arg(linkColor.name(),
tintColor(textColor, tintForQuoteIndicator).name());
static QFile file(Common::writablePath(Common::LOCATION_DATA) + QLatin1String("message.css"));
static QDateTime lastVersion;
QDateTime lastTouched(file.exists() ? QFileInfo(file).lastModified() : QDateTime());
if (lastVersion < lastTouched) {
stylesheet = defaultStyle;
if (file.open(QIODevice::ReadOnly | QIODevice::Text)) {
const QString userSheet = QString::fromLocal8Bit(file.readAll().data());
lastVersion = lastTouched;
stylesheet += QLatin1Char('\n') + userSheet;
file.close();
}
}
// The dir="auto" is required for WebKit to treat all paragraphs as entities with possibly different text direction.
// The individual paragraphs unfortunately share the same text alignment, though, as per
// https://bugs.webkit.org/show_bug.cgi?id=71194 (fixed in Blink already).
QString htmlHeader(QLatin1String("<html><head><style type=\"text/css\"><!--") + textColors + fontSpecification + stylesheet +
QLatin1String("--></style></head><body><pre dir=\"auto\">"));
static QString htmlFooter(QStringLiteral("\n</pre></body></html>"));
// We cannot rely on the QWebFrame's toPlainText because of https://bugs.kde.org/show_bug.cgi?id=321160
QString markup = plainTextToHtml(partIndex.data(Imap::Mailbox::RolePartUnicodeText).toString(), flowedFormatForPart(partIndex));
return htmlHeader + markup + htmlFooter;
}
QFile* Snapshot::savedFileForSnapshot(bool isTemporary) {
auto glCanvas = DependencyManager::get<GLCanvas>();
QImage shot = glCanvas->grabFrameBuffer();
Avatar* avatar = Application::getInstance()->getAvatar();
glm::vec3 location = avatar->getPosition();
glm::quat orientation = avatar->getHead()->getOrientation();
// add metadata
shot.setText(LOCATION_X, QString::number(location.x));
shot.setText(LOCATION_Y, QString::number(location.y));
shot.setText(LOCATION_Z, QString::number(location.z));
shot.setText(ORIENTATION_X, QString::number(orientation.x));
shot.setText(ORIENTATION_Y, QString::number(orientation.y));
shot.setText(ORIENTATION_Z, QString::number(orientation.z));
shot.setText(ORIENTATION_W, QString::number(orientation.w));
shot.setText(DOMAIN_KEY, DependencyManager::get<NodeList>()->getDomainHandler().getHostname());
QString formattedLocation = QString("%1_%2_%3").arg(location.x).arg(location.y).arg(location.z);
// replace decimal . with '-'
formattedLocation.replace('.', '-');
QString username = AccountManager::getInstance().getAccountInfo().getUsername();
// normalize username, replace all non alphanumeric with '-'
username.replace(QRegExp("[^A-Za-z0-9_]"), "-");
QDateTime now = QDateTime::currentDateTime();
QString filename = FILENAME_PATH_FORMAT.arg(username, now.toString(DATETIME_FORMAT), formattedLocation);
const int IMAGE_QUALITY = 100;
if (!isTemporary) {
QString snapshotFullPath = Menu::getInstance()->getSnapshotsLocation();
if (!snapshotFullPath.endsWith(QDir::separator())) {
snapshotFullPath.append(QDir::separator());
}
snapshotFullPath.append(filename);
QFile* imageFile = new QFile(snapshotFullPath);
imageFile->open(QIODevice::WriteOnly);
shot.save(imageFile, 0, IMAGE_QUALITY);
imageFile->close();
return imageFile;
} else {
QTemporaryFile* imageTempFile = new QTemporaryFile(QDir::tempPath() + "/XXXXXX-" + filename);
if (!imageTempFile->open()) {
qDebug() << "Unable to open QTemporaryFile for temp snapshot. Will not save.";
return NULL;
}
shot.save(imageTempFile, 0, IMAGE_QUALITY);
imageTempFile->close();
return imageTempFile;
}
}
Sequence::Sequence(
//CAMERASET
QString INPUT_PATH_CAMERA_SET_IN,
//MODEL
QString INPUT_BasePath_OutPut_IN,
QString INPUT_dynamicStringPart_IN,
QString INPUT_EXTENSSS_Mesh_IN,
QString INPUT_EXTENSSS_Skeleton_IN,
QString INPUT_EXTENSSS_Skin_IN,
QString INPUT_PATH_MODELS_INFO_IN,
//ANIMATION
QString PATH_OutputBase_IN,
QString PATH_FolderName_INPUT_IN,
QString INPUT_EXTENSSS_Motion_IN,
QString PATH_INDEX_BOUNDS_IN,
//SEQUENCE
QString PATH_INDEX_BOUNDS_INNN,
QString RadioSequenceID_String_IN,
bool printEnabled
)
{
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
cameraSet = CameraSet( INPUT_PATH_CAMERA_SET_IN );
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Animation animSource = Animation(
//MODEL
INPUT_BasePath_OutPut_IN,
INPUT_dynamicStringPart_IN,
INPUT_EXTENSSS_Mesh_IN,
INPUT_EXTENSSS_Skeleton_IN,
INPUT_EXTENSSS_Skin_IN,
INPUT_PATH_MODELS_INFO_IN,
//ANIMATION
PATH_OutputBase_IN,
PATH_FolderName_INPUT_IN,
INPUT_EXTENSSS_Motion_IN,
PATH_INDEX_BOUNDS_IN,
"Source_Animation",
printEnabled
);
Animation animTarget = Animation(
//MODEL
INPUT_BasePath_OutPut_IN,
INPUT_dynamicStringPart_IN,
INPUT_EXTENSSS_Mesh_IN,
INPUT_EXTENSSS_Skeleton_IN,
INPUT_EXTENSSS_Skin_IN,
INPUT_PATH_MODELS_INFO_IN,
//ANIMATION
PATH_OutputBase_IN,
PATH_FolderName_INPUT_IN,
INPUT_EXTENSSS_Motion_IN,
PATH_INDEX_BOUNDS_IN,
"Target_Animation",
printEnabled
);
posedAnimations.append( animSource );
posedAnimations.append( animTarget );
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
currentFrameNumber_Source = 0;
currentFrameNumber_Target = 0;
sequenceID_String = RadioSequenceID_String_IN;
sequenceID = sequenceID_String.toInt() - 1;
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
QFile myFile ( PATH_INDEX_BOUNDS_INNN );
myFile.open(QIODevice::ReadOnly);
if( !myFile.isOpen() )
{
qDebug() << "\n\n\n Sequence::Sequence - ERROR, unable to open **" << PATH_INDEX_BOUNDS_INNN << "** for IndexCheat Input \n\n\n";
return;
}
QTextStream myStream(&myFile);
QString dummyDescr;
myStream >> dummyDescr; myStream >> totalAllignedFrames; posedAnimations[0].totalAllignedFrames = totalAllignedFrames;
myStream >> dummyDescr; myStream >> motionOffset; posedAnimations[0].motionOffset = motionOffset;
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////
/////////////////////////////////////////
if (printEnabled) printAnimationINFO();
/////////////////////////////////////////
/////////////////////////////////////////
}
MainWindow::MainWindow(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::MainWindow)
{
ui->setupUi(this);
ArrayInit();
QFile file;//загрузка jquery и добавление ноу конфликт
file.setFileName(":/jquery-1.11.3.min.js");
file.open(QIODevice::ReadOnly);
jQuery = file.readAll();
jQuery.append("\nvar qt = { 'jQuery': jQuery.noConflict(true) };");
file.close();
ServIP="127.0.0.1";
QFile htmlF;//подгрузка html
htmlF.setFileName(":/page.html");
htmlF.open(QFile::ReadOnly);
Html = htmlF.readAll();
htmlF.close();
QFile styleF;//подгрузка стилей
styleF.setFileName("://style.qss");
styleF.open(QFile::ReadOnly);
QString qssStr = styleF.readAll();
qApp->setStyleSheet(qssStr);
styleF.close();
QWebSettings::globalSettings()->setAttribute(QWebSettings::PluginsEnabled, true);
QWebSettings::globalSettings()->setAttribute(QWebSettings::AutoLoadImages, true);
QWebSettings::globalSettings()->setAttribute(QWebSettings::JavascriptEnabled, true);
connect(ui->webView,SIGNAL(loadFinished(bool)),this,SLOT(UIloadFinished(bool)));
ui->webView->load(QUrl("http://free-filmy.ru/"));
connect(this,SIGNAL (phase2(QString)),this ,SLOT(Phase2Do(QString)));
wb1=new QWebView();
connect(wb1,SIGNAL(loadFinished(bool)),this,SLOT(loadFinished(bool)));
connect(wb1,SIGNAL(loadProgress(int)),this, SLOT(changeProgress(int)));
wb2=new QWebView();
connect(wb2,SIGNAL(loadFinished(bool)),this,SLOT(loadFinished2(bool)));
dial=new QDialog;
wb3=new QWebView();
pb=new QPushButton();
pb->setText("OK");
VBox=new QVBoxLayout;
VBox->addWidget(wb3);
VBox->addWidget(pb);
HBox=new QHBoxLayout;
HBox->addLayout(VBox);
dial->setLayout(HBox);
dial2=new QDialog;
wb4=new QWebView();
VBox2=new QVBoxLayout;
VBox2->addWidget(wb4);
HBox2=new QHBoxLayout;
HBox2->addLayout(VBox2);
dial2->setLayout(HBox2);
connect(pb,SIGNAL(clicked(bool)),this,SLOT(pb_click(bool)));
connect(wb3->page()->mainFrame(),SIGNAL(titleChanged(QString)),this,SLOT(img_put(QString)));
done2=true;
}
// ---------------------------------------------------
// Converts a spice netlist into Qucs format and outputs it.
void SimMessage::nextSPICE()
{
QString Line;
for(;;) { // search for next SPICE component
Line = *(Collect.begin());
Collect.remove(Collect.begin());
if(Line == "*") { // worked on all components ?
startSimulator(); // <<<<<================== go on ===
return;
}
// FIXME #warning SPICE section below not being covered?
qDebug() << "goin thru SPICE branch on simmmessage.cpp";
if(Line.left(5) == "SPICE") {
if(Line.at(5) != 'o') insertSim = true;
else insertSim = false;
break;
}
Collect.append(Line);
}
QString FileName = Line.section('"', 1,1);
Line = Line.section('"', 2); // port nodes
if(Line.isEmpty()) makeSubcircuit = false;
else makeSubcircuit = true;
QString prog;
QStringList com;
prog = QucsSettings.BinDir + "qucsconv";
if(makeSubcircuit)
com << "-g" << "_ref";
com << "-if" << "spice" << "-of" << "qucs";
QFile SpiceFile;
if(FileName.find(QDir::separator()) < 0) // add path ?
SpiceFile.setName(QucsSettings.QucsWorkDir.path() + QDir::separator() + FileName);
else
SpiceFile.setName(FileName);
if(!SpiceFile.open(QIODevice::ReadOnly)) {
ErrText->insert(tr("ERROR: Cannot open SPICE file \"%1\".").arg(FileName));
FinishSimulation(-1);
return;
}
if(makeSubcircuit) {
Stream << "\n.Def:" << properName(FileName) << " ";
Line.replace(',', ' ');
Stream << Line;
if(!Line.isEmpty()) Stream << " _ref";
}
Stream << "\n";
ProgressText = "";
qDebug() << "start QucsConv" << prog << com.join(" ");
SimProcess.start(prog, com);
if(!SimProcess.Running) {
ErrText->insert(tr("ERROR: Cannot start QucsConv!"));
FinishSimulation(-1);
return;
}
QByteArray SpiceContent = SpiceFile.readAll();
SpiceFile.close();
QString command(SpiceContent); //to convert byte array to string
SimProcess.setStandardInputFile(command); //? FIXME works?
qDebug() << command;
connect(&SimProcess, SIGNAL(wroteToStdin()), SLOT(slotCloseStdin()));
}
void
VeloHeroUploader::requestUpload()
{
assert(sessionId.length() > 0 );
parent->progressLabel->setText(tr("preparing VeloHero data ..."));
QHttpMultiPart *body = new QHttpMultiPart( QHttpMultiPart::FormDataType );
QHttpPart textPart;
textPart.setHeader(QNetworkRequest::ContentDispositionHeader,
QVariant("form-data; name=\"upload_submit\""));
textPart.setBody("hrm");
body->append( textPart );
QString fname = context->athlete->home->temp().absoluteFilePath(".velohero-upload.pwx" );
QFile *uploadFile = new QFile( fname );
uploadFile->setParent(body);
PwxFileReader reader;
reader.writeRideFile(context, ride->ride(), *uploadFile );
parent->progressBar->setValue(parent->progressBar->value()+20/parent->shareSiteCount);
int limit = 16777216; // 16MB
if( uploadFile->size() >= limit ){
parent->errorLabel->setText(tr("temporary file too large for upload: %1 > %1 bytes")
.arg(uploadFile->size())
.arg(limit) );
eventLoop.quit();
return;
}
QHttpPart filePart;
filePart.setHeader(QNetworkRequest::ContentTypeHeader,
QVariant("application/occtet-stream"));
filePart.setHeader(QNetworkRequest::ContentDispositionHeader,
QVariant("form-data; name=\"file\"; filename=\"gc-upload-velohero.pwx\""));
uploadFile->open(QIODevice::ReadOnly);
filePart.setBodyDevice(uploadFile);
body->append( filePart );
parent->progressLabel->setText(tr("sending to VeloHero..."));
currentRequest = reqUpload;
#if QT_VERSION > 0x050000
QUrlQuery urlquery( VELOHERO_URL + "/upload/file" );
#else
QUrl urlquery( VELOHERO_URL + "/upload/file" );
#endif
urlquery.addQueryItem( "view", "xml" );
urlquery.addQueryItem( "sso", sessionId );
#if QT_VERSION > 0x050000
QUrl url;
url.setQuery(urlquery);
QNetworkRequest request = QNetworkRequest(url);
#else
QNetworkRequest request = QNetworkRequest(urlquery);
#endif
request.setRawHeader( "Accept-Encoding", "identity" );
request.setRawHeader( "Accept", "application/xml" );
request.setRawHeader( "Accept-Charset", "utf-8" );
QNetworkReply *reply = networkMgr.post( request, body );
body->setParent( reply );
}
bool SGFParser::parseASCII(const QString &fileName, ASCII_Import *charset, bool isFilename)
{
QTextStream *txt = NULL;
bool result = false;
asciiOffsetX = asciiOffsetY = 0;
#if 0
qDebug("BLACK STONE CHAR %c\n"
"WHITE STONE CHAR %c\n"
"STAR POINT CHAR %c\n"
"EMPTY POINT CHAR %c\n"
"HOR BORDER CHAR %c\n"
"VER BORDER CHAR %c\n",
charset->blackStone,
charset->whiteStone,
charset->starPoint,
charset->emptyPoint,
charset->hBorder,
charset->vBorder);
#endif
if (isFilename) // Load from file
{
QFile file;
if (fileName.isNull() || fileName.isEmpty())
{
QMessageBox::warning(0, PACKAGE, Board::tr("No filename given!"));
delete txt;
return false;
}
file.setName(fileName);
if (!file.exists())
{
QMessageBox::warning(0, PACKAGE, Board::tr("Could not find file:") + " " + fileName);
delete txt;
return false;
}
if (!file.open(IO_ReadOnly))
{
QMessageBox::warning(0, PACKAGE, Board::tr("Could not open file:") + " " + fileName);
delete txt;
return false;
}
txt = new QTextStream(&file);
if (!initStream(txt))
{
QMessageBox::critical(0, PACKAGE, Board::tr("Invalid text encoding given. Please check preferences!"));
delete txt;
return false;
}
result = parseASCIIStream(txt, charset);
file.close();
}
else // a string was passed instead of a filename, copy from clipboard
{
if (fileName.isNull() || fileName.isEmpty())
{
QMessageBox::warning(0, PACKAGE, Board::tr("Importing ASCII failed. Clipboard empty?"));
delete txt;
return false;
}
QString buf(fileName);
txt = new QTextStream(buf, IO_ReadOnly);
if (!initStream(txt))
{
QMessageBox::critical(0, PACKAGE, Board::tr("Invalid text encoding given. Please check preferences!"));
delete txt;
return false;
}
result = parseASCIIStream(txt, charset);
}
delete txt;
return result;
}
void atlasMap::sHandleAtlas()
{
_map->clear();
if (_atlas->text().isEmpty())
return;
if (DEBUG)
qDebug("atlasMap::sHandleAtlas() entered with %s and %s",
qPrintable(_atlas->text()), qPrintable(_defaultDir));
if (! _defaultDir.isEmpty() && _atlas->text().startsWith(_defaultDir))
_atlas->setText(_atlas->text().remove(0, _defaultDir.length() + 1));
QFile atlasfile;
if (QFile::exists(_atlas->text()))
atlasfile.setFileName(_atlas->text());
else if (QFile::exists(_defaultDir + QDir::separator() + _atlas->text()))
atlasfile.setFileName(_defaultDir + QDir::separator() + _atlas->text());
else
{
QMessageBox::warning(this, tr("Could not find Atlas"),
tr("<p>Could not find the Atlas file to open to look "
"for CSV import Maps."));
return;
}
if (! atlasfile.open(QIODevice::ReadOnly))
{
QMessageBox::critical(this, tr("Could not open Atlas"),
tr("<p>Could not open the Atlas file %1 (error %2).")
.arg(atlasfile.fileName(), atlasfile.errorString()));
return;
}
QXmlQuery mapq;
mapq.setMessageHandler(_msghandler);
if (! mapq.setFocus(&atlasfile))
{
QMessageBox::critical(this, tr("No Focus"),
tr("<p>Could not set focus on the Atlas %1")
.arg(atlasfile.fileName()));
return;
}
// string() at the end tells the query to generate a sequence of values
mapq.setQuery("/CSVAtlas/CSVMap/Name/text()/string()");
if (! mapq.isValid())
{
QMessageBox::critical(this, tr("Invalid Query"),
tr("<p>The query is not valid for some reason"));
return;
}
QStringList maplist;
if (! mapq.evaluateTo(&maplist))
{
QMessageBox::warning(this, tr("No Maps"),
tr("<p>Could not find any Maps in the Atlas %1")
.arg(atlasfile.fileName()));
return;
}
else
for (int i = 0; i < maplist.size(); i++)
_map->append(i, maplist.at(i));
}
QPair<QString, QString> GetOSNameSplit ()
{
#if defined(Q_OS_MAC)
QSysInfo::MacVersion v = QSysInfo::MacintoshVersion;
if (v == QSysInfo::MV_10_3)
return SplitInfo_t ("Mac OS X", "10.3");
else if (v == QSysInfo::MV_10_4)
return SplitInfo_t ("Mac OS X", "10.4");
else if (v == QSysInfo::MV_10_5)
return SplitInfo_t ("Mac OS X", "10.5");
else if (v == QSysInfo::MV_10_6)
return SplitInfo_t ("Mac OS X", "10.6");
else if (v == QSysInfo::MV_10_7)
return SplitInfo_t ("Mac OS X", "10.7");
else
return SplitInfo_t ("Mac OS X", "Unknown version");
#elif defined(Q_OS_WIN32)
QSysInfo::WinVersion v = QSysInfo::WindowsVersion;
if (v == QSysInfo::WV_95)
return SplitInfo_t ("Windows", "95");
else if (v == QSysInfo::WV_98)
return SplitInfo_t ("Windows", "98");
else if (v == QSysInfo::WV_Me)
return SplitInfo_t ("Windows", "Me");
else if (v == QSysInfo::WV_DOS_based)
return SplitInfo_t ("Windows", "9x/Me");
else if (v == QSysInfo::WV_NT)
return SplitInfo_t ("Windows", "NT 4.x");
else if (v == QSysInfo::WV_2000)
return SplitInfo_t ("Windows", "2000");
else if (v == QSysInfo::WV_XP)
return SplitInfo_t ("Windows", "XP");
else if (v == QSysInfo::WV_2003)
return SplitInfo_t ("Windows", "2003");
else if (v == QSysInfo::WV_VISTA)
return SplitInfo_t ("Windows", "Vista");
else if (v == QSysInfo::WV_WINDOWS7)
return SplitInfo_t ("Windows", "7");
else if (v == 0x00a0)
return SplitInfo_t ("Windows", "8");
else if (v == QSysInfo::WV_NT_based)
return SplitInfo_t ("Windows", "NT-based");
#else
QString osName;
QProcess proc;
proc.start (QString ("/bin/sh"),
QStringList ("-c") << "lsb_release -ds", QIODevice::ReadOnly);
if (proc.waitForStarted ())
{
QTextStream stream (&proc);
QString ret;
while (proc.waitForReadyRead ())
ret += stream.readAll ();
proc.close ();
if (!ret.isEmpty ())
osName = ret.remove ('"').trimmed ();
}
if (osName.isEmpty ())
{
struct OsInfo_t
{
QString path;
QString name;
} OsInfo [] =
{
{ "/etc/mandrake-release", "Mandrake Linux" },
{ "/etc/debian_version", "Debian GNU/Linux" },
{ "/etc/gentoo-release", "Gentoo Linux" },
{ "/etc/exherbo-release", "Exherbo" },
{ "/etc/arch-release", "Arch Linux" },
{ "/etc/slackware-version", "Slackware Linux" },
{ "/etc/pld-release", "" },
{ "/etc/lfs-release", "LFS" },
{ "/etc/SuSE-release", "SuSE linux" },
{ "/etc/conectiva-release", "Connectiva" },
{ "/etc/.installed", "" },
{ "/etc/redhat-release", "" },
{ "", "" }
};
OsInfo_t *osptr = OsInfo;
while (!osptr->path.isEmpty ())
{
QFileInfo fi (osptr->path);
if (fi.exists ())
{
QFile f (osptr->path);
f.open (QIODevice::ReadOnly);
QString data = QString (f.read (1024)).trimmed ();
if (osptr->name.isEmpty ())
osName = data;
else
osName = QString ("%1 (%2)")
.arg (osptr->name)
.arg (data);
break;
}
++osptr;
}
}
utsname u;
uname (&u);
return qMakePair (osName.isEmpty () ? QString (u.sysname) : osName,
QString ("%1 %2 %3").arg (u.machine, u.release, u.version));
#endif
return qMakePair (QString ("Unknown OS"), QString ("Unknown version"));
}
int main(int argc, char *argv[])
{
enum ExitCode
{
Success,
ParseFailure,
ArgumentError,
WriteError,
FileFailure
};
QCoreApplication app(argc, argv);
QTextStream errorStream(stderr);
if (argc != 2)
{
errorStream << PrettyPrint::tr(
"Usage: prettyprint <path to XML file>\n");
return ArgumentError;
}
QString inputFilePath(QCoreApplication::arguments().at(1));
QFile inputFile(inputFilePath);
if (!QFile::exists(inputFilePath))
{
errorStream << PrettyPrint::tr(
"File %1 does not exist.\n").arg(inputFilePath);
return FileFailure;
} else if (!inputFile.open(QIODevice::ReadOnly)) {
errorStream << PrettyPrint::tr(
"Failed to open file %1.\n").arg(inputFilePath);
return FileFailure;
}
QFile outputFile;
if (!outputFile.open(stdout, QIODevice::WriteOnly))
{
QTextStream(stderr) << PrettyPrint::tr("Failed to open stdout.");
return WriteError;
}
QXmlStreamReader reader(&inputFile);
int indentation = 0;
QHash<int,QPair<int, int> > indentationStack;
while (!reader.atEnd())
{
reader.readNext();
if (reader.isStartElement()) {
indentationStack[indentation] = QPair<int,int>(
reader.lineNumber(), reader.columnNumber());
indentation += 1;
} else if (reader.isEndElement()) {
indentationStack.remove(indentation);
indentation -= 1;
}
if (reader.error())
{
errorStream << PrettyPrint::tr(
"Error: %1 in file %2 at line %3, column %4.\n").arg(
reader.errorString(), inputFilePath,
QString::number(reader.lineNumber()),
QString::number(reader.columnNumber()));
if (indentationStack.contains(indentation-1)) {
int line = indentationStack[indentation-1].first;
int column = indentationStack[indentation-1].second;
errorStream << PrettyPrint::tr(
"Opened at line %1, column %2.\n").arg(
QString::number(line),
QString::number(column));
}
return ParseFailure;
} else if (reader.isStartElement() && !reader.name().isEmpty()) {
outputFile.write(QByteArray().fill(' ', indentation));
outputFile.write(reader.name().toString().toLocal8Bit());
outputFile.write(QString(" line %1, column %2\n").arg(
reader.lineNumber()).arg(reader.columnNumber()).toLocal8Bit());
}
}
return Success;
}
void ShortLocater::Initializations(){
IPsoc->resetRelays();
IPsoc->srcImpedanceSelection(SRC_IMP_0E);
// IPsoc->shLocatorDetection();
m_nADCtimer = new QTimer(this);
IBackPlane->writeBackPlaneRegister(0x0FFF,0x001E);//clear all interrupts
IBackPlane->writeBackPlaneRegister(0x0000,0x0020);//disable all interrupts
IBackPlane->writeBackPlaneRegister(0x0000,0x0024);//disable global interrupt
IBackPlane->writeBackPlaneRegister(0x0100,0x0020);//enabling psoc INT0embedded key interrupt)
IPTKeyEvent->InvokeGPIOEvent(this,"/dev/input/event2","pt_kpp",&m_nPTKeyCode);
IGPIOEvent->InvokeGPIOEvent(this,"/dev/input/event7","gpioevent",&m_nGPIOCode);
IBackPlane->writeBackPlaneRegister(0x0001,0x0024);
// IBackPlane->writeBackPlaneRegister();
ohms=QChar(0x2126);
micro=QChar(0x00B5);
//~~~~~~~~~~~~~Reading Short Values from File~~~~~~~~~~~~~~~~~~~~~~
QStringList stringList;
bool ok=true;
QFile textFile;
textFile.setFileName("shortValuesI.txt");
if (textFile.open(QIODevice::ReadOnly))
{
QTextStream textStream(&textFile);
while (!textStream.atEnd())
{
stringList.append(textStream.readLine());
}
r200EShortValue=stringList.value(0).toDouble(&ok);
qDebug()<<"200E Short Value:"<<r200EShortValue;
r2EShortValue=stringList.value(1).toDouble(&ok);
qDebug()<<"2E Short Value:"<<r2EShortValue;
r200mEShortValue=stringList.value(2).toDouble(&ok);
qDebug()<<"200mE Short Value:"<<r200mEShortValue;
}else{
r200EShortValue=r200mEShortValue=r2EShortValue=0.0;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//~~~~~~~~Check for debug panel~~~~~~~~~~~~~~~~~~~~~~~~
QStringList debugPanel;
QFile textFile2("debugPanel.txt");
if (textFile2.open(QIODevice::ReadOnly))
{
QTextStream textStream(&textFile2);
while (!textStream.atEnd())
{
debugPanel.append(textStream.readLine());
if(debugPanel.value(0)=="1")
ToolBox(true);
else
ToolBox(false);
}
}else{
ToolBox(false);
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
IDMMLib->ApplyDACOffset(false);
dis->setValue("OL");
IBackPlane->writeBackPlaneRegister(0x0,0x16);
// Beep(false);
AutoFlag=false;
on_Auto_clicked();
OffsetFlag=false;
BuzzerFlag=false;
msgBoxLive=false;
ui.progressBar_2->setValue(0);
for(int i=0;i<100;i++)
avgRetval[i]=0.0;
retval=retval2=retval3=0.0;
nullify=0.0;
nullit=0.0;
avg=0;
noOFsamples=1;
rangePrevValue=33;
ui.uE->setText(micro+ohms);
on_r200But_clicked();
ui.holdCap->setVisible(false);
runFlag=true;
startStop();
ui.openShortEnable->setChecked(true);
m_nAvgCount=0;
movingAverage=5;
ui.splashWidget->setVisible(false);
usleep(1000);
}
/*!
* \brief SimMessage::startSimulator simulates the document in view.
*/
void SimMessage::startSimulator()
{
// Using the Doc pointer here is risky as the user may have closed
// the schematic, but converting the SPICE netlists is (hopefully)
// faster than the user (I have no other idea).
QString SimTime;
QString Program;
QStringList Arguments;
QString SimPath = QDir::convertSeparators (QucsSettings.QucsHomeDir.absPath());
#ifdef __MINGW32__
QString QucsDigiLib = "qucsdigilib.bat";
QString QucsDigi = "qucsdigi.bat";
QString QucsVeri = "qucsveri.bat";
#else
QString QucsDigiLib = "qucsdigilib";
QString QucsDigi = "qucsdigi";
QString QucsVeri = "qucsveri";
#endif
SimOpt = NULL;
bool isVerilog = false;
// Simulate text window.
if(DocWidget->inherits("QTextEdit")) {
TextDoc * Doc = (TextDoc*)DocWidget;
// Take VHDL file in memory as it could contain unsaved changes.
Stream << Doc->toPlainText();
NetlistFile.close();
ProgText->insert(tr("done.")+"\n"); // of "creating netlist...
// Simulation.
if (Doc->simulation) {
SimTime = Doc->SimTime;
QString libs = Doc->Libraries.lower();
/// \todo \bug error: unrecognized command line option '-Wl'
#ifdef __MINGW32__
if(libs.isEmpty()) {
libs = "";
}
else {
libs.replace(" ",",-l");
libs = "-Wl,-l" + libs;
}
#else
if(libs.isEmpty()) {
libs = "-c";
}
else {
libs.replace(" ",",-l");
libs = "-c,-l" + libs;
}
#endif
Program = pathName(QucsSettings.BinDir + QucsDigi);
Arguments << QucsSettings.QucsHomeDir.filePath("netlist.txt")
<< DataSet << SimTime << pathName(SimPath)
<< pathName(QucsSettings.BinDir) << libs;
}
// Module.
else {
QString text = Doc->toPlainText();
VHDL_File_Info VInfo (text);
QString entity = VInfo.EntityName.lower();
QString lib = Doc->Library.lower();
if (lib.isEmpty()) lib = "work";
QString dir = QDir::convertSeparators (QucsSettings.QucsHomeDir.path());
QDir vhdlDir(dir);
if(!vhdlDir.exists("vhdl"))
if(!vhdlDir.mkdir("vhdl")) {
ErrText->insert(tr("ERROR: Cannot create VHDL directory \"%1\"!")
.arg(vhdlDir.path()+"/vhdl"));
return;
}
vhdlDir.setPath(vhdlDir.path()+"/vhdl");
if(!vhdlDir.exists(lib))
if(!vhdlDir.mkdir(lib)) {
ErrText->insert(tr("ERROR: Cannot create VHDL directory \"%1\"!")
.arg(vhdlDir.path()+"/"+lib));
return;
}
vhdlDir.setPath(vhdlDir.path()+"/"+lib);
QFile destFile;
destFile.setName(vhdlDir.filePath(entity+".vhdl"));
if(!destFile.open(QIODevice::WriteOnly)) {
ErrText->insert(tr("ERROR: Cannot create \"%1\"!")
.arg(destFile.name()));
return;
}
destFile.writeBlock(text.ascii(), text.length());
destFile.close();
Program = pathName(QucsSettings.BinDir + QucsDigiLib);
Arguments << QucsSettings.QucsHomeDir.filePath("netlist.txt")
<< pathName(SimPath)
<< entity
<< lib;
}
}
// Simulate schematic window.
else {
// output NodeSets, SPICE simulations etc.
for(QStringList::Iterator it = Collect.begin();
it != Collect.end(); ++it) {
// don't put library includes into netlist...
if ((*it).right(4) != ".lst" &&
(*it).right(5) != ".vhdl" &&
(*it).right(4) != ".vhd" &&
(*it).right(2) != ".v") {
Stream << *it << '\n';
}
}
Stream << '\n';
isVerilog = ((Schematic*)DocWidget)->isVerilog;
SimTime = ((Schematic*)DocWidget)->createNetlist(Stream, SimPorts);
if(SimTime.length()>0&&SimTime.at(0) == '\xA7') {
NetlistFile.close();
ErrText->insert(SimTime.mid(1));
FinishSimulation(-1);
return;
}
if (isVerilog) {
Stream << "\n"
<< " initial begin\n"
<< " $dumpfile(\"digi.vcd\");\n"
<< " $dumpvars();\n"
<< " #" << SimTime << " $finish;\n"
<< " end\n\n"
<< "endmodule // TestBench\n";
}
NetlistFile.close();
ProgText->insert(tr("done.")+"\n"); // of "creating netlist...
if(SimPorts < 0) {
// append command arguments
// append netlist with same arguments
if (! Module::vaComponents.isEmpty()) {
/*! Only pass modules to Qucsator that are indeed used on
* the schematic,it might be the case that the user loaded the icons,
* but did not compiled the module. Qucsator will not find the library.
*
* Check if used symbols have corresponing lib before running
* Qucsator? Need to search on the netlis.txt? Is there other data
* structure containig the netlist?
*
*/
QStringList usedComponents;
if (!NetlistFile.open(QIODevice::ReadOnly))
QMessageBox::critical(this, tr("Error"), tr("Cannot read netlist!"));
else {
QString net = QString(NetlistFile.readAll());
QMapIterator<QString, QString> i(Module::vaComponents);
while (i.hasNext()) {
i.next();
if (net.contains(i.key()))
usedComponents << i.key();
}
NetlistFile.close();
}
if (! usedComponents.isEmpty()) {
// \todo remvoe the command line arguments? use only netlist annotation?
//Arguments << "-p" << QucsSettings.QucsWorkDir.absolutePath()
// << "-m" << usedComponents;
//qDebug() << "Command :" << Program << Arguments.join(" ");
/// Anotate netlist with Verilog-A dynamic path and module names
///
if (!NetlistFile.open(QFile::Append | QFile::Text))
QMessageBox::critical(this, tr("Error"), tr("Cannot read netlist!"));
else {
QTextStream out(&NetlistFile);
out << "\n";
out << "# --path=" << QucsSettings.QucsWorkDir.absolutePath() << "\n";
out << "# --module=" << usedComponents.join(" ") << "\n";
NetlistFile.close();
}
}
} // vaComponents not empty
if((SimOpt = findOptimization((Schematic*)DocWidget))) {
((Optimize_Sim*)SimOpt)->createASCOnetlist();
Program = QucsSettings.AscoBinDir.canonicalPath();
Program = QDir::toNativeSeparators(Program+"/"+"asco"+QString(executableSuffix));
Arguments << "-qucs" << QucsSettings.QucsHomeDir.filePath("asco_netlist.txt")
<< "-o" << "asco_out";
}
else {
Program = QucsSettings.BinDir + "qucsator" + executableSuffix;
Arguments << "-b" << "-g" << "-i"
<< QucsSettings.QucsHomeDir.filePath("netlist.txt")
<< "-o" << DataSet;
}
}
else {
if (isVerilog) {
Program = QDir::toNativeSeparators(QucsSettings.BinDir + QucsVeri);
Arguments << QDir::toNativeSeparators(QucsSettings.QucsHomeDir.filePath("netlist.txt"))
<< DataSet
<< SimTime
<< QDir::toNativeSeparators(SimPath)
<< QDir::toNativeSeparators(QucsSettings.BinDir)
<< "-c";
} else {
/// \todo \bug error: unrecognized command line option '-Wl'
#ifdef __MINGW32__
Program = QDir::toNativeSeparators(pathName(QucsSettings.BinDir + QucsDigi));
Arguments << QDir::toNativeSeparators(QucsSettings.QucsHomeDir.filePath("netlist.txt"))
<< DataSet
<< SimTime
<< QDir::toNativeSeparators(SimPath)
<< QDir::toNativeSeparators(QucsSettings.BinDir) << "-Wall" << "-c";
#else
Program = QDir::toNativeSeparators(pathName(QucsSettings.BinDir + QucsDigi));
Arguments << QucsSettings.QucsHomeDir.filePath("netlist.txt")
<< DataSet << SimTime << pathName(SimPath)
<< pathName(QucsSettings.BinDir) << "-Wall" << "-c";
#endif
}
}
}
disconnect(&SimProcess, 0, 0, 0);
connect(&SimProcess, SIGNAL(readyReadStandardError()), SLOT(slotDisplayErr()));
connect(&SimProcess, SIGNAL(readyReadStandardOutput()), SLOT(slotDisplayMsg()));
connect(&SimProcess, SIGNAL(finished(int)), SLOT(slotSimEnded(int)));
#ifdef SPEEDUP_PROGRESSBAR
waitForUpdate = false;
#endif
wasLF = false;
ProgressText = "";
#ifdef __MINGW32__
QString sep(";"); // path separator
#else
QString sep(":");
#endif
// append process PATH
QProcessEnvironment env = QProcessEnvironment::systemEnvironment();
// insert Qucs bin dir, so ASCO can find qucsator
env.insert("PATH", env.value("PATH") + sep + QucsSettings.BinDir );
SimProcess.setProcessEnvironment(env);
QFile file(Program);
if ( !file.exists() ){
ErrText->insert(tr("ERROR: Program not found: %1").arg(Program));
FinishSimulation(-1);
return;
}
else
file.close();
qDebug() << "Command :" << Program << Arguments.join(" ");
SimProcess.start(Program, Arguments); // launch the program
if(!SimProcess.Running) {
ErrText->insert(tr("ERROR: Cannot start simulator!"));
FinishSimulation(-1);
return;
}
}
void QJDMainWindow::creatNewLine(QString lineName)
{
QString lowerCaseLineName;
lowerCaseLineName=lineName.toLower();
lowerCaseLineName.simplified();
lowerCaseLineName.remove(" ");
qDebug()<<"creatNewLine::"<<lineName<<lowerCaseLineName; // 所有大写阿,带空格的之类的统一小写,并且去空格
//1. 创建文件夹,需要获取当前area文件夹名称,通过当前的名称获取
QDir newDir;
newDir.setPath(areaWidget->getAbsolutePath());
if(newDir.exists(lowerCaseLineName))
{
QMessageBox::warning(this,"Warning!","Do not creat the same LINE again!");
return;
}
if(!newDir.mkdir(lowerCaseLineName))
qDebug()<<"Creat New Line Dir failed";
//2. 创建.Line Desc
QFile newDesc;
newDesc.setFileName(newDir.path()+"/"+lowerCaseLineName+"/DescName");
if(!newDesc.open(QFile::WriteOnly))
{
qDebug()<<"creat new desc open failed";
}
QTextStream ts(&newDesc);
ts<<lineName<<"\n";
newDesc.close();
// 3. 创建Data文件夹
QDir dataDir;
QString dataDirPath=areaWidget->getAbsolutePath()+"/"+lowerCaseLineName;
dataDir.setPath(dataDirPath);
if(dataDir.exists("Data"))
{
QMessageBox::warning(this,"Warning!","Can not creat the Data Dir for this LINE!");
return;
}
if(!dataDir.mkdir("Data"))
qDebug()<<"Creat Line Data Dir failed";
QFile dataDesc;
dataDesc.setFileName(dataDir.path()+"/Data/DescName");
if(!dataDesc.open(QFile::WriteOnly))
{
qDebug()<<"creat data dir desc open failed";
}
QTextStream datats(&dataDesc);
datats<<"Data\n";
dataDesc.close();
// 4. 创建各个类型文件的文件夹
QStringList fileTypeList=settings.value("FileType").toStringList();
for(int i=0; i<fileTypeList.size(); i++)
{
QDir typeDir;
QString typeDirPath=dataDirPath+"/Data";
typeDir.setPath(typeDirPath);
if(typeDir.exists(fileTypeList.at(i)))
{
QMessageBox::warning(this,"Warning!","Can not creat the Same Type Dir for this LINE Data!");
return;
}
if(!typeDir.mkdir(fileTypeList.at(i)))
qDebug()<<"Creat Line Data Dir failed";
}
setHomeDir(getHomeDir());
areaWidget->expandToDepth(1);
}
void startCrashHandler(int signal)
{
QFile output;
QString lin, cmd;
/** At the moment the backtrace function does not exists on MingW (Windows) this way
the code that generates the stacktrace is available only on Linux/Unix systems */
#ifndef Q_OS_WIN
void *stack[20];
size_t stack_size, i;
char **symbols=nullptr;
stack_size = backtrace(stack, 20);
symbols = backtrace_symbols(stack, stack_size);
#endif
#ifdef Q_OS_MAC
cmd=QApplication::applicationDirPath() + GlobalAttributes::DIR_SEPARATOR +
GlobalAttributes::CRASH_HANDLER_PATH + " -style " + GlobalAttributes::DEFAULT_QT_STYLE;
#else
cmd=GlobalAttributes::CRASH_HANDLER_PATH + " -style " + GlobalAttributes::DEFAULT_QT_STYLE;
#endif
//Creates the stacktrace file
output.setFileName(GlobalAttributes::TEMPORARY_DIR +
GlobalAttributes::DIR_SEPARATOR +
GlobalAttributes::STACKTRACE_FILE);
output.open(QFile::WriteOnly);
if(output.isOpen())
{
lin=QString("** pgModeler crashed after receive signal: %1 **\n\nDate/Time: %2 \nVersion: %3 \nBuild: %4 \n")
.arg(signal)
.arg(QDateTime::currentDateTime().toString("yyyy-MM-dd hh:mm:ss"))
.arg(GlobalAttributes::PGMODELER_VERSION)
.arg(GlobalAttributes::PGMODELER_BUILD_NUMBER);
lin+=QString("Compilation Qt version: %1\nRunning Qt version: %2\n\n")
.arg(QT_VERSION_STR)
.arg(qVersion());
output.write(lin.toStdString().c_str(), lin.size());
#ifndef Q_OS_WIN
for(i=0; i < stack_size; i++)
{
lin=QString(symbols[i]) + QString("\n");
output.write(lin.toStdString().c_str(), lin.size());
}
free(symbols);
#else
lin=QString("** Stack trace unavailable on Windows system **");
output.write(lin.toStdString().c_str(), lin.size());
#endif
output.close();
}
/* Changing the working dir to the main executable in order to call the crash handler
if the PGMODELER_CHANDLER_PATH isn't set */
QDir dir;
dir.cd(QApplication::applicationDirPath());
exit(1 + system(cmd.toStdString().c_str()));
}
/**OK
* Estrae il file fileName, contenuto nell'oggetto zip, con il nome fileDest.
* Se la funzione fallisce restituisce false e cancella il file che si e tentato di estrarre.
*
* La funzione fallisce se:
* * zip==NULL;
* * l'oggetto zip e stato aperto in una modalita non compatibile con l'estrazione di file;
* * non e possibile aprire il file all'interno dell'oggetto zip;
* * non e possibile creare il file estratto;
* * si e rilevato un errore nella copia dei dati (1);
* * non e stato possibile chiudere il file all'interno dell'oggetto zip (1);
*
* (1): prima di uscire dalla funzione cancella il file estratto.
*/
bool JlCompress::extractFile(QuaZip* zip, QString fileName, QString fileDest) {
// zip: oggetto dove aggiungere il file
// filename: nome del file reale
// fileincompress: nome del file all'interno del file compresso
// Controllo l'apertura dello zip
if (!zip) return false;
if (zip->getMode()!=QuaZip::mdUnzip) return false;
// Apro il file compresso
if (!fileName.isEmpty())
zip->setCurrentFile(fileName);
QuaZipFile inFile(zip);
if(!inFile.open(QIODevice::ReadOnly) || inFile.getZipError()!=UNZ_OK) return false;
// Controllo esistenza cartella file risultato
QDir curDir;
if (fileDest.endsWith('/')) {
if (!curDir.mkpath(fileDest)) {
return false;
}
} else {
if (!curDir.mkpath(QFileInfo(fileDest).absolutePath())) {
return false;
}
}
QuaZipFileInfo64 info;
if (!zip->getCurrentFileInfo(&info))
return false;
QFile::Permissions srcPerm = info.getPermissions();
if (fileDest.endsWith('/') && QFileInfo(fileDest).isDir()) {
if (srcPerm != 0) {
QFile(fileDest).setPermissions(srcPerm);
}
return true;
}
// Apro il file risultato
QFile outFile;
outFile.setFileName(fileDest);
if(!outFile.open(QIODevice::WriteOnly)) return false;
// Copio i dati
if (!copyData(inFile, outFile) || inFile.getZipError()!=UNZ_OK) {
outFile.close();
removeFile(QStringList(fileDest));
return false;
}
outFile.close();
// Chiudo i file
inFile.close();
if (inFile.getZipError()!=UNZ_OK) {
removeFile(QStringList(fileDest));
return false;
}
if (srcPerm != 0) {
outFile.setPermissions(srcPerm);
}
return true;
}
static QString acquire_base_path (void)
{
QString proc_path = "/proc/";
QString maps_file = "/maps";
QString pid_as_string = QString::number (getpid ());
QString the_maps = proc_path % pid_as_string % maps_file;
QFile file (the_maps);
if (!file.open (QIODevice::ReadOnly | QIODevice::Text))
{
qDebug () << "FATAL: Don't know how to open: " << the_maps;
exit (1);
}
QString base_path;
QTextStream in (&file);
QRegExp splitter ("^[^\\s]+\\s+[^\\s]+\\s+[^\\s]+\\s+[^\\s]+\\s+[^\\s]+\\s+");
QString line;
do
{
line = in.readLine ();
if (line.isNull ())
{
qDebug () << "FATAL: Can't determine base path";
exit (1);
}
// Find if line contains our library name (librfgis_android_wrap.so)
QString end = line.split (splitter).last ();
QStringList path_elements = end.split ("/");
if (path_elements.last () == "librfgis.so")
{
qDebug() << "Found ourselves: " << end;
int max_elements = path_elements.size () - 2;
for (int i = 0; i < max_elements; i++)
{
if (i + 1 == max_elements)
{
base_path = base_path % path_elements [i];
}
else
{
base_path = base_path % path_elements [i] % "/";
}
}
break;
}
}
while (!line.isNull ());
return base_path;
}
bool LzNTunnelsSynthesis::loadBaseClearanceTemplateData(OutputClearanceImageType type)
{
hasinitBaseClearanceData = false;
baseClearandeData.initMaps();
QFile file;
QString in;
QString typefilename = "";
switch (type)
{
case OutputClearanceImageType::OutType_B_NeiRan: typefilename = "BaseClearance_B_NeiRan.sec"; break;
case OutputClearanceImageType::OutType_B_DianLi: typefilename = "BaseClearance_B_DianLi.sec"; break;
case OutputClearanceImageType::OutType_D_NeiRan: typefilename = "BaseClearance_D_NeiRan.sec"; break;
case OutputClearanceImageType::OutType_D_DianLi: typefilename = "BaseClearance_D_DianLi.sec"; break;
default: typefilename = "BaseClearance_B_DianLi.sec"; break;
}
QString filename = QString::fromLocal8Bit(templatepath.c_str()) + "/" + typefilename;
qDebug() << "filename " << filename;
file.setFileName(filename);
// Currently here for debugging purposes
qDebug() << "Reading file: " << filename.toLocal8Bit().data() << endl;
if (file.open(QIODevice::ReadOnly | QIODevice::Text))
{
QTextStream inStream(&file);
// readfile
in = inStream.readLine();
int height;
int left;
int right;
while(!(in.isNull()))
{
height = in.section("\t",0,0).toInt();
left = in.section("\t",1,1).toInt();
// Reads in fifth column: signal-to-noise ratio
right = in.section("\t",2,2).toInt();
baseClearandeData.updateToMapVals(height, (float)left, (float)right);
in = inStream.readLine();
}
file.close();
qDebug() << "read_end" << endl;
hasinitBaseClearanceData = true;
return true;
}
// Do some proper debugging here at some point...
else
{
std::cout << "Problem reading file: " << filename.toLocal8Bit().data() << std::endl;
hasinitBaseClearanceData = false;
return false;
}
}
QString MyString::dataToPullbackDotString(Data *data)
{
QString buffer;
//exp
buffer += MyString::stateVectorToPullbackString(data->affordanceStates);
buffer += MyString::arrowVectorToPullbackString(data->affordanceEdges);
buffer += MyString::stateVectorToPullbackString(data->actionStates);
buffer += MyString::arrowVectorToPullbackString(data->actionEdges);
buffer += MyString::stateVectorToPullbackString(data->abstractStates);
buffer += MyString::arrowVectorToPullbackString(data->abstractEdges);
buffer += MyString::stateMappingsToPullbackString(data->mapAffordanceToAbstractNodes); //separate collection for states needed?
buffer += "\n";
buffer += MyString::edgeMappingsToPullbackString(data->mapAffordanceToAbstractEdges);
buffer += "\n";
buffer += MyString::stateMappingsToPullbackString(data->mapActionToAbstractNodes);
buffer += "\n";
buffer += MyString::edgeMappingsToPullbackString(data->mapActionToAbstractEdges);
buffer += "\n";
//fetch dot file from Haskell routine
QString tempPath = QDir::tempPath();
QString serializePath, dotPath;
for (int i = 0; ; i++)
{
serializePath = tempPath;
serializePath += "/uic";
serializePath += QString::number(i);
serializePath += + ".txt";
if (!QFile::exists(serializePath))
break;
}
for (int j = 0; ; j++)
{
dotPath = tempPath;
dotPath += "/uic";
dotPath += QString::number(j);
dotPath += ".dot";
if (!QFile::exists(dotPath))
break;
}
QFile serializeFile(serializePath);
serializeFile.open(QIODevice::WriteOnly | QIODevice::Text);
QTextStream out(&serializeFile);
out << buffer;
serializeFile.close();
//qDebug() << "Wrote string:\n" << buffer << "to file: " << serializePath;
#ifdef Q_OS_LINUX
QProcess::execute("cd /tmp");
#endif
QString haskellCmd;
haskellCmd += QCoreApplication::applicationDirPath();
haskellCmd += "/bin/pullbacks_first ";
haskellCmd += serializePath;
haskellCmd += " ";
haskellCmd += dotPath;
qDebug() << haskellCmd;
int ret = QProcess::execute(haskellCmd);
if (ret)
{
qDebug() << "Haskell command returned error value";
qDebug() << "Wrote string:\n" << buffer << "to file: " << serializePath;
return "";
}
//read dot file
QString dot;
QFile file;
file.setFileName(dotPath);
file.open(QIODevice::ReadOnly);
dot = file.readAll();
file.close();
return dot;
}
int main(int argc, char *argv[])
{
QMap<QString,ParamPair> paramList;
QString username = "";
QString filename;
QString printerName;
bool haveUsername = FALSE;
bool haveDatabaseURL = FALSE;
bool loggedIn = FALSE;
bool print = FALSE;
bool printPreview = FALSE;
bool close = FALSE;
int numCopies = 1;
// BVI::Sednacom
// new options
bool pdfOutput = FALSE;
QString pdfFileName;
// BVI::Sednacom
QString databaseURL = "";
QString loadFromDB = "";
QApplication app(argc, argv);
app.addLibraryPath(".");
OpenRPT::languages.addTranslationToDefault(":/common.qm");
OpenRPT::languages.addTranslationToDefault(":/wrtembed.qm");
OpenRPT::languages.addTranslationToDefault(":/renderer.qm");
OpenRPT::languages.addTranslationToDefault(":/renderapp.qm");
OpenRPT::languages.installSelected();
if (app.argc() > 1)
{
haveUsername = FALSE;
bool havePasswd = FALSE;
QString passwd = "";
QStringList arguments;
QString firstArgument = QString( app.argv()[ 1 ] );
if( firstArgument.startsWith("-fromStdin=", Qt::CaseInsensitive) ){
QFile file;
file.open(stdin, QIODevice::ReadOnly);
QTextStream in(&file);
in.setCodec( firstArgument.right( firstArgument.length() - 11 ).toAscii() );
QString arg;
while( arg.compare("-launch") !=0 ){
arg = in.readLine();
arguments << arg;
}
file.close();
}
else{
for (int intCounter = 1; intCounter < app.argc(); intCounter++){
arguments << QString (app.argv()[intCounter]);
}
}
for ( QStringList::Iterator it = arguments.begin(); it != arguments.end(); ++it ) {
QString argument( *it );
if (argument.startsWith("-databaseURL=", Qt::CaseInsensitive)) {
haveDatabaseURL = TRUE;
databaseURL = argument.right(argument.length() - 13);
}
else if (argument.startsWith("-username="******"-passwd=", Qt::CaseInsensitive))
{
havePasswd = TRUE;
passwd = argument.right(argument.length() - 8);
}
else if (argument.toLower() == "-noauth")
{
haveUsername = TRUE;
havePasswd = TRUE;
}
else if (argument.startsWith("-numCopies=", Qt::CaseInsensitive)){
numCopies = argument.right( argument.length() - 11).toInt();
}
else if (argument.toLower() == "-print")
print = true;
else if (argument.toLower() == "-printpreview")
printPreview = true;
else if (argument.toLower() == "-close")
close = true;
else if (argument.startsWith("-printerName=", Qt::CaseInsensitive))
printerName = argument.right(argument.length() - 13);
else if (argument.startsWith("-param=", Qt::CaseInsensitive))
{
QString str = argument.right(argument.length() - 7);
bool active = true;
QString name;
QString type;
QString value;
QVariant var;
int sep = str.indexOf('=');
if(sep == -1)
name = str;
else
{
name = str.left(sep);
value = str.right(str.length() - (sep + 1));
}
str = name;
sep = str.indexOf(':');
if(sep != -1)
{
name = str.left(sep);
type = str.right(str.length() - (sep + 1));
}
if(name.startsWith("-"))
{
name = name.right(name.length() - 1);
active = false;
}
else if(name.startsWith("+"))
name = name.right(name.length() - 1);
if(!value.isEmpty())
var = XVariant::decode(type, value);
paramList[name] = ParamPair(active, var);
}
// BVI::Sednacom
// manage new arguments for CLI
else if (argument.startsWith("-pdf", Qt::CaseInsensitive)) {
pdfOutput = true ;
}
else if (argument.startsWith("-outpdf=", Qt::CaseInsensitive)) {
pdfFileName = argument.right(argument.length() - 8 ) ;
}
// BVI::Sednacom
else if (argument.startsWith("-loadfromdb=", Qt::CaseInsensitive))
loadFromDB = argument.right(argument.length() - 12);
else if (argument.toLower() == "-e")
XSqlQuery::setNameErrorValue("Missing");
else if(!argument.startsWith("-"))
filename = argument;
}
if ( (haveDatabaseURL) && (haveUsername) && (havePasswd) )
{
QSqlDatabase db;
QString protocol;
QString hostName;
QString dbName;
QString port;
db = databaseFromURL( databaseURL );
if (!db.isValid())
{
QMessageBox::critical(0, QObject::tr("Can not load database driver"), QObject::tr("Unable to load the database driver. Please contact your systems administrator."));
QApplication::exit(-1);
}
db.setUserName(username);
db.setPassword(passwd);
if (!db.open())
{
QMessageBox::critical(0, QObject::tr("Unable to connect to database"), QObject::tr("Unable to connect to the database with the given information."));
QApplication::exit(-1);
}
else
loggedIn = TRUE;
}
}
if(!loggedIn)
{
ParameterList params;
params.append("name", RenderWindow::name());
params.append("copyright", OpenRPT::copyright);
params.append("version", OpenRPT::version);
params.append("build", OpenRPT::build);
if (haveUsername)
params.append("username", username);
if (haveDatabaseURL)
params.append("databaseURL", databaseURL);
login newdlg(0, "", TRUE);
newdlg.set(params, 0);
if (newdlg.exec() == QDialog::Rejected)
return -1;
}
// The following is code that works specifically with the xTuple ERP database
// This should be expanded to be usefull when not connecting to an xTuple ERP
// database as well. Command line option maybe?
XSqlQuery langq("SELECT * "
"FROM usr, locale LEFT OUTER JOIN"
" lang ON (locale_lang_id=lang_id) LEFT OUTER JOIN"
" country ON (locale_country_id=country_id) "
"WHERE ( (usr_username=CURRENT_USER)"
" AND (usr_locale_id=locale_id) );" );
if (langq.first())
{
QStringList paths;
paths << "dict";
paths << "";
paths << "../dict";
paths << app.applicationDirPath() + "/dict";
paths << app.applicationDirPath();
paths << app.applicationDirPath() + "/../dict";
#if defined Q_WS_MACX
paths << app.applicationDirPath() + "/../../../dict";
paths << app.applicationDirPath() + "/../../..";
#endif
QStringList files;
if (!langq.value("locale_lang_file").toString().isEmpty())
files << langq.value("locale_lang_file").toString();
QString langext;
if (!langq.value("lang_abbr2").toString().isEmpty() &&
!langq.value("country_abbr").toString().isEmpty())
{
langext = langq.value("lang_abbr2").toString() + "_" +
langq.value("country_abbr").toString().toLower();
}
else if (!langq.value("lang_abbr2").toString().isEmpty())
{
langext = langq.value("lang_abbr2").toString();
}
if(!langext.isEmpty())
{
files << "reports." + langext;
XSqlQuery pkglist("SELECT pkghead_name FROM pkghead WHERE packageIsEnabled(pkghead_name);");
while(pkglist.next())
{
files << pkglist.value("pkghead_name").toString() + "." + langext;
}
}
if (files.size() > 0)
{
QTranslator *translator = new QTranslator(&app);
for (QStringList::Iterator fit = files.begin(); fit != files.end(); ++fit)
{
for(QStringList::Iterator pit = paths.begin(); pit != paths.end(); ++pit)
{
qDebug("looking for %s in %s", (*fit).toAscii().data(), (*pit).toAscii().data());
if (translator->load(*fit, *pit))
{
app.installTranslator(translator);
qDebug("installed %s/%s", (*pit).toAscii().data(), (*fit).toAscii().data());
translator = new QTranslator(&app);
break;
}
}
}
}
}
// END language loading code
RenderWindow mainwin;
mainwin._printerName = printerName;
if(!filename.isEmpty())
mainwin.fileOpen(filename);
if(!loadFromDB.isEmpty())
mainwin.fileLoad(loadFromDB);
QMap<QString,ParamPair>::Iterator it;
for ( it = paramList.begin(); it != paramList.end(); ++it ) {
mainwin.updateParam(it.key(), it.value().second, it.value().first);
}
// BVI::Sednacom
// do not display window for PDF output
if (!pdfOutput)
mainwin.show();
// BVI::Sednacom
if(print)
mainwin.filePrint( numCopies );
if(printPreview)
mainwin.filePreview( numCopies );
// BVI::Sednacom
// generate the PDF
if (pdfOutput)
mainwin.filePrintToPDF(pdfFileName);
// BVI::Sednacom
if(close)
{
mainwin.fileExit();
return 0;
}
return app.exec();
}
bool RC2UI::makeDialog()
{
line = in->readLine();
do {
QFile fileOut;
QString buffer;
int count;
QCString className;
uint x, y, w, h;
uint endDesc;
bool space = FALSE;
for ( endDesc = 0; endDesc < line.length() ; endDesc++ ) {
char c = (QChar)line.at(endDesc);
if ( space && (c >= '0') && (c <= '9') )
break;
space = c==' ';
}
QString desc = line.left(endDesc-1);
line = line.right( line.length() - endDesc );
className = parseNext( desc, ' ' );
count = sscanf( line, "%u, %u, %u, %u", &x, &y, &w, &h );
if ( !count && count == EOF )
return FALSE;
char property[256];
QStringList styles;
QStringList extendedStyles;
QString caption = "";
QString baseClass = "";
QString widgetType;
QString widgetName;
QString arguments;
int pointsize = 10;
QString fontname;
do {
line = "";
do {
if ( in->eof() )
return TRUE;
line += in->readLine();
} while ( line[(int)line.length()-1] == '|' ||
line[(int)line.length()-1] == ',' );
count = sscanf( line, "%s", property );
line = line.right( line.length() - line.find(" ") -1 );
if ( QString(property) == "STYLE" ) {
styles = splitStyles(line);
if ( styles.contains( "WS_CAPTION" ) )
baseClass = "QDialog";
else
baseClass = "QWidget";
} else if ( QString(property) == "CAPTION" ) {
caption = stripQM( line );
} else if ( QString(property) == "FONT" ) {
QString pt = line.left( line.find(",") );
pointsize = pt.toInt();
fontname = stripQM(line.right( line.length() - line.find(",") - 2 ));
}
} while ( line != "BEGIN" );
if ( writeToFile ) {
QString outputFile = QString(className) + ".ui";
fileOut.setName( outputFile );
if (!fileOut.open( IO_WriteOnly ) )
qFatal( "rc2ui: Could not open output file '%s'", outputFile.latin1() );
out = new QTextStream( &fileOut );
targetFiles.append( outputFile );
} else {
out = new QTextStream( &buffer, IO_WriteOnly );
}
*out << "<!DOCTYPE UI><UI>" << endl;
writeClass( className );
wi(); *out << "<widget>"<< endl; indent();
writeClass( baseClass );
writeCString( "name", className );
writeRect( "geometry", x, y, w, h );
writeString( "caption", caption );
writeFont( fontname, pointsize );
do {
if ( in->eof() )
return TRUE;
line = in->readLine().stripWhiteSpace();
if ( line == "END" )
continue;
widgetType = parseNext(line, ' ');
arguments = line.stripWhiteSpace();
while ( arguments[(int)arguments.length()-1] == ',' ||
arguments[(int)arguments.length()-1] == '|' )
arguments += " "+in->readLine().stripWhiteSpace();
wi(); *out << "<widget>" << endl; indent();
WidgetType ID = IDUnknown;
QString controlType;
QString widgetID;
QString widgetText;
bool hasText = FALSE;
bool isControl = FALSE;
bool isFrame = FALSE;
if ( widgetType == "PUSHBUTTON" ) {
ID = IDPushButton;
hasText = TRUE;
} else if ( widgetType == "DEFPUSHBUTTON" ) {
ID = IDPushButton;
hasText = TRUE;
} else if ( widgetType == "LTEXT" ) {
ID = IDLabel;
hasText = TRUE;
} else if ( widgetType == "CTEXT" ) {
ID = IDLabel;
hasText = TRUE;
} else if ( widgetType == "RTEXT" ) {
ID = IDLabel;
hasText = TRUE;
} else if ( widgetType == "EDITTEXT" ) {
ID = IDLineEdit;
} else if ( widgetType == "GROUPBOX" ) {
ID = IDGroupBox;
hasText = TRUE;
} else if ( widgetType == "COMBOBOX" ) {
ID = IDComboBox;
} else if ( widgetType == "LISTBOX" ) {
ID = IDListBox;
} else if ( widgetType == "SCROLLBAR" ) {
ID = IDScrollBar;
} else if ( widgetType == "CHECKBOX" ) {
ID = IDCheckBox;
hasText = TRUE;
} else if ( widgetType == "RADIOBUTTON" ) {
ID = IDRadioButton;
hasText = TRUE;
} else if ( widgetType == "CONTROL" ) {
isControl = TRUE;
widgetText = stripQM(parseNext( arguments ));
widgetID = parseNext( arguments );
controlType = stripQM(parseNext( arguments ));
styles = splitStyles(parseNext( arguments ));
if ( controlType == "Static" ) {
ID = IDLabel;
} else if ( controlType == "Button" ) {
if ( styles.contains("BS_AUTOCHECKBOX") ||
styles.contains("BS_3STATE") )
ID = IDCheckBox;
else if ( styles.contains("BS_AUTORADIOBUTTON") )
ID = IDRadioButton;
} else if ( controlType == "msctls_updown32" ) {
ID = IDSpinBox;
} else if ( controlType == "msctls_progress32" ) {
ID = IDProgressBar;
} else if ( controlType == "msctls_trackbar32" ) {
ID = IDSlider;
} else if ( controlType == "SysListView32" ) {
ID = IDIconView;
} else if ( controlType == "SysTreeView32" ) {
ID = IDListView;
} else if ( controlType == "SysTabControl32" ) {
ID = IDTabWidget;
} else if ( controlType == "SysAnimate32" ) {
ID = IDLabel;
} else if ( controlType == "RICHEDIT" ) {
ID = IDMultiLineEdit;
} else if ( controlType == "ComboBoxEx32" ) {
ID = IDComboBox;
} else if ( controlType == "" ) {
ID = IDCustom;
} else {
ID = IDUnknown;
}
} else
ID = IDUnknown;
if ( hasText )
widgetText = stripQM(parseNext( arguments ));
if ( isControl ) {
x = parseNext( arguments ).toInt();
y = parseNext( arguments ).toInt();
w = parseNext( arguments ).toInt();
h = parseNext( arguments ).toInt();
} else {
widgetID = parseNext( arguments );
x = parseNext( arguments ).toInt();
y = parseNext( arguments ).toInt();
w = parseNext( arguments ).toInt();
h = parseNext( arguments ).toInt();
styles.clear();
}
do {
extendedStyles = splitStyles(parseNext( arguments ));
for ( uint i = 0; i < extendedStyles.count(); i++ )
styles << (*extendedStyles.at(i));
} while ( arguments.find(',') > -1 );
switch ( ID ) {
case IDWidget:
break;
case IDPushButton:
{
writeClass("QPushButton");
writeCString( "name", useName("PushButton_"+widgetID) );
writeRect( "geometry", x, y, w, h );
writeString( "text", widgetText );
if ( widgetType == "DEFPUSHBUTTON" )
writeBool( "default", TRUE );
}
break;
case IDLabel:
{
isFrame = TRUE,
writeClass("QLabel");
writeCString( "name", useName("Label_"+widgetID) );
writeRect( "geometry", x,y,w,h );
writeString( "text", widgetText );
QString align;
if ( !styles.contains("SS_CENTERIMAGE") )
align += "|AlignTop";
else
align += "|AlignVCenter";
if ( widgetType == "LTEXT" ) {
align += "|AlignLeft";
} else if ( widgetType == "CTEXT") {
align += "|AlignHCenter";
} else if ( widgetType == "RTEXT") {
align += "|AlignRight";
}
writeSet("alignment", align );
}
break;
case IDCheckBox:
{
writeClass("QCheckBox");
writeCString("name", useName("CheckBox_"+widgetID) );
writeRect("geometry", x,y,w,h);
writeString("text", widgetText );
if ( styles.contains( "BS_3STATE" ) )
writeBool( "tristate", TRUE );
}
break;
case IDRadioButton:
{
writeClass("QRadioButton");
writeCString("name", useName("RadioButton_"+widgetID) );
writeRect("geometry", x,y,w,h);
writeString("text", widgetText );
}
break;
case IDGroupBox:
{
isFrame = TRUE;
writeClass("QGroupBox");
writeCString( "name", useName("GroupBox_"+widgetID) );
writeRect( "geometry", x,y,w,h );
writeString( "title", widgetText );
if ( !styles.contains( "WS_BORDER" ) )
styles.append( "WS_BORDER" );
}
break;
case IDLineEdit:
{
if ( !styles.contains("ES_MULTILINE") ) {
writeClass("QLineEdit");
writeCString( "name", useName("LineEdit_"+widgetID) );
} else {
writeClass("QMultiLineEdit");
writeCString( "name", useName("MultiLineEdit_"+widgetID) );
}
writeRect( "geometry", x,y,w,h );
QString align = "AlignTop";
if ( styles.contains("ES_CENTER") )
align+="|AlignHCenter";
else if ( styles.contains("ES_RIGHT") )
align+="|AlignRight";
else
align+="|AlignLeft";
writeSet("alignment", align);
}
break;
case IDMultiLineEdit:
{
writeClass("QMultiLineEdit");
writeCString("name", useName("MultiLineEdit_"+widgetID) );
writeRect("geometry", x,y,w,h );
}
break;
case IDIconView:
{
isFrame = TRUE;
writeClass("QIconView");
writeCString("name", useName("IconView_"+widgetID) );
writeRect("geometry", x,y,w,h );
if ( !styles.contains( "LVS_SINGLESEL" ) )
writeEnum( "selectionMode", "Extended" );
if ( styles.contains( "LVS_NOLABELWRAP" ) )
writeBool("wordWrapIconText", FALSE );
}
break;
case IDListView:
{
isFrame = TRUE;
writeClass("QListView");
writeCString("name", useName("ListView_"+widgetID) );
writeRect("geometry", x,y,w,h );
if ( styles.contains( "TVS_LINESATROOT" ) )
writeBool( "rootIsDecorated", TRUE );
if ( styles.contains( "TVS_FULLROWSELECT" ) )
writeBool( "allColumnsShowFocus", TRUE );
}
break;
case IDProgressBar:
{
isFrame = TRUE;
writeClass("QProgressBar");
writeCString("name", useName("ProgressBar_"+widgetID) );
writeRect("geometry", x,y,w,h );
if ( styles.contains("TBS_VERT") )
writeEnum("orientation", "Vertical");
else
writeEnum("orientation", "Horizontal");
}
break;
case IDTabWidget:
{
writeClass("QTabWidget");
writeCString("name", useName("TabWidget_"+widgetID) );
writeRect("geometry", x,y,w,h );
wi(); *out << "<widget>" << endl; indent();
writeClass("QWidget");
wi(); *out << "<attribute>" << endl; indent();
wi(); *out << "<name>title</name>" << endl;
wi(); *out << "<string>Tab1</string>" << endl; undent();
wi(); *out << "</attribute>" << endl; undent();
wi(); *out << "</widget>" << endl;
}
break;
case IDSpinBox:
{
isFrame = TRUE;
writeClass("QSpinBox");
writeCString("name", useName("SpinBox_"+widgetID) );
writeRect("geometry", x,y,w,h);
}
break;
case IDSlider:
{
writeClass("QSlider");
writeCString("name", useName("Slider_"+widgetID) );
writeRect("geometry", x,y,w,h );
if ( styles.contains("TBS_VERT") )
writeEnum("orientation", "Vertical");
else
writeEnum("orientation", "Horizontal");
if ( !styles.contains("TBS_NOTICKS") )
writeEnum("tickmarks", "Left" );
}
break;
case IDComboBox:
{
writeClass("QComboBox");
writeCString("name", useName("ComboBox_"+widgetID) );
if ( isControl )
writeRect( "geometry", x,y,w,14 );
else
writeRect( "geometry", x,y,w,h );
}
break;
case IDListBox:
{
isFrame = TRUE;
writeClass("QListBox");
writeCString("name", useName("ListBox_"+widgetID) );
writeRect( "geometry", x,y,w,h );
if ( styles.contains("WS_HSCROLL") )
writeEnum("hScrollBarMode", "Auto");
else
writeEnum("hScrollBarMode", "AlwaysOff");
if ( styles.contains("WS_VSCROLL") )
writeEnum("vScrollBarMode", "Auto");
else
writeEnum("vScrollBarMode", "AlwaysOff");
if ( styles.contains("LBS_EXTENDEDSEL") )
writeEnum("selectionMode", "Extended");
else if ( styles.contains("LBS_MULTIPLESEL") )
writeEnum("selectionMode", "Multi");
else if ( styles.contains("LBS_NOSEL") )
writeEnum("selectionMode", "NoSelection");
else
writeEnum("selectionMode", "Single");
if ( !styles.contains( "NO WS_BORDER" ) )
styles.append( "WS_BORDER" );
}
break;
case IDScrollBar:
{
writeClass("QScrollBar");
writeCString("name", useName("ScrollBar_"+widgetID) );
writeRect("geometry", x,y,w,h );
if ( styles.contains("SBS_VERT") )
writeEnum("orientation", "Vertical");
else
writeEnum("orientation", "Horizontal");
}
break;
case IDCustom:
{
writeClass("QLabel");
writeCString("name", useName("Custom_"+widgetID) );
writeRect("geometry", x,y,w,h );
writeString("text", "Create a custom widget and place it here." );
}
default:
{
writeClass("QLabel");
writeCString("name", useName("Unknown_"+widgetID) );
writeRect("geometry", x,y,w,h );
writeString("text", QString("No support for %1.").arg(controlType) );
}
break;
}
writeStyles( styles, isFrame );
styles.clear();
undent();
wi(); *out << "</widget>" << endl;
} while ( line != "END" );
undent();
wi(); *out << "</widget>" << endl;
*out << "</UI>" << endl;
do {
line = in->readLine();
} while ( line.isEmpty() );
if ( !writeToFile )
target.append( buffer.copy() );
if (out) {
delete out;
out = 0;
}
fileOut.close();
} while ( line != blockStart1 );
return TRUE;
}
// -------------------------------------------------------------------------
bool SpiceDialog::loadSpiceNetList(const QString& s)
{
Comp->withSim = false;
if(s.isEmpty()) return false;
QFileInfo FileInfo(QucsWorkDir, s);
NodesList->clear();
PortsList->clear();
textStatus = 0;
Line = Error = "";
QString preprocessor = PrepCombo->currentText();
if (preprocessor != "none") {
bool piping = true;
QString script;
#ifdef __MINGW32__
QString interpreter = "tinyperl.exe";
#else
QString interpreter = "perl";
#endif
if (preprocessor == "ps2sp") {
script = "ps2sp";
} else if (preprocessor == "spicepp") {
script = "spicepp.pl";
} else if (preprocessor == "spiceprm") {
script = "spiceprm";
piping = false;
}
script = QucsSettings.BinDir + script;
SpicePrep = new Q3Process(this);
SpicePrep->addArgument(interpreter);
SpicePrep->addArgument(script);
SpicePrep->addArgument(FileInfo.filePath());
QFile PrepFile;
QFileInfo PrepInfo(QucsWorkDir, s + ".pre");
QString PrepName = PrepInfo.filePath();
if (!piping) {
SpicePrep->addArgument(PrepName);
connect(SpicePrep, SIGNAL(readyReadStdout()), SLOT(slotSkipOut()));
connect(SpicePrep, SIGNAL(readyReadStderr()), SLOT(slotGetPrepErr()));
} else {
connect(SpicePrep, SIGNAL(readyReadStdout()), SLOT(slotGetPrepOut()));
connect(SpicePrep, SIGNAL(readyReadStderr()), SLOT(slotGetPrepErr()));
}
QMessageBox *MBox = new QMessageBox(tr("Info"),
tr("Preprocessing SPICE file \"%1\".").arg(FileInfo.filePath()),
QMessageBox::NoIcon, QMessageBox::Abort,
QMessageBox::NoButton, QMessageBox::NoButton, this, 0, true,
Qt::WStyle_DialogBorder | Qt::WDestructiveClose);
connect(SpicePrep, SIGNAL(processExited()), MBox, SLOT(close()));
if (piping) {
PrepFile.setName(PrepName);
if(!PrepFile.open(QIODevice::WriteOnly)) {
QMessageBox::critical(this, tr("Error"),
tr("Cannot save preprocessed SPICE file \"%1\".").
arg(PrepName));
return false;
}
prestream = new Q3TextStream(&PrepFile);
}
if(!SpicePrep->start()) {
QMessageBox::critical(this, tr("Error"),
tr("Cannot execute \"%1\".").arg(interpreter + " " + script));
if (piping) {
PrepFile.close();
delete prestream;
}
return false;
}
SpicePrep->closeStdin();
MBox->exec();
delete SpicePrep;
if (piping) {
PrepFile.close();
delete prestream;
}
if(!Error.isEmpty()) {
QMessageBox::critical(this, tr("SPICE Preprocessor Error"), Error);
return false;
}
FileInfo = QFileInfo(QucsWorkDir, s + ".pre");
}
// first call Qucsconv ............
QucsConv = new Q3Process(this);
QucsConv->addArgument(QucsSettings.BinDir + "qucsconv");
QucsConv->addArgument("-if");
QucsConv->addArgument("spice");
QucsConv->addArgument("-of");
QucsConv->addArgument("qucs");
QucsConv->addArgument("-i");
QucsConv->addArgument(FileInfo.filePath());
connect(QucsConv, SIGNAL(readyReadStdout()), SLOT(slotGetNetlist()));
connect(QucsConv, SIGNAL(readyReadStderr()), SLOT(slotGetError()));
QMessageBox *MBox = new QMessageBox(tr("Info"),
tr("Converting SPICE file \"%1\".").arg(FileInfo.filePath()),
QMessageBox::NoIcon, QMessageBox::Abort,
QMessageBox::NoButton, QMessageBox::NoButton, this, 0, true,
Qt::WStyle_DialogBorder | Qt::WDestructiveClose);
connect(QucsConv, SIGNAL(processExited()), MBox, SLOT(close()));
if(!QucsConv->start()) {
QMessageBox::critical(this, tr("Error"),
tr("Cannot execute \"%1\".").arg(QucsSettings.BinDir + "qucsconv"));
return false;
}
QucsConv->closeStdin();
MBox->exec();
delete QucsConv;
if(!Error.isEmpty())
QMessageBox::critical(this, tr("QucsConv Error"), Error);
Property *pp = Comp->Props.at(1);
if(!pp->Value.isEmpty()) {
PortsList->clear();
PortsList->insertStringList(QStringList::split(',', pp->Value));
}
QString tmp;
Q3ListBoxItem *pi;
for(unsigned int i=0; i<PortsList->count(); i++) {
tmp = PortsList->text(i).remove(0, 4);
PortsList->changeItem(tmp, i);
pi = NodesList->findItem(tmp, Qt::CaseSensitive | QKeySequence::ExactMatch);
if(pi) delete pi;
else PortsList->removeItem(i--);
}
return true;
}
bool RC2UI::makeStringTable()
{
if ( !writeToFile )
return TRUE;
QFile fileOut;
line = in->readLine();
do {
char stringtable[256];
char discard[12];
sscanf( line, "%s %s", stringtable, discard );
if ( QString(stringtable) != "STRINGTABLE" )
return TRUE;
do {
line = in->readLine();
} while ( line != "BEGIN" );
QString outputFile = QString(stringtable).lower() + ".h";
if (outputFile ) {
fileOut.setName( outputFile );
if (!fileOut.open( IO_WriteOnly ) )
qFatal( "rc2ui: Could not open output file '%s'", outputFile.latin1() );
out = new QTextStream( &fileOut );
}
*out << "#ifndef STRINGTABLE_H" << endl;
*out << "#define STRINGTABLE_H" << endl;
*out << endl;
*out << "#include <qstring.h>" << endl;
*out << "#include <qobject.h>" << endl;
*out << endl;
QString ID;
QString value;
do {
line = in->readLine().stripWhiteSpace();
if ( line == "END" )
continue;
ID = parseNext(line, ' ');
value = parseNext(line).stripWhiteSpace();
*out << "static const QString " << ID << "= QT_TR_NOOP(" << value << ");" << endl;
} while ( line != "END" );
*out << endl;
*out << "#endif // STRINGTABLE_H" << endl;
do {
line = in->readLine();
} while ( line.isEmpty() );
if ( out ) {
delete out;
out = 0;
}
} while ( line != blockStart1 );
return TRUE;
}
void WBWebPage::handleUnsupportedContent(QNetworkReply *reply)
{
if(reply->url().scheme() == "mailto")
{
bool result = QDesktopServices::openUrl(reply->url());
if (result)
return;
}
QString contentType = reply->header(QNetworkRequest::ContentTypeHeader).toString();
bool isPDF = (contentType == "application/pdf");
// Delete this big "if (isPDF)" block to get the pdf directly inside the browser
if (isPDF)
{
QMessageBox messageBox(mainWindow());
messageBox.setText(tr("Download PDF Document: would you prefer to download the PDF file or add it to the current OpenBoard document?"));
messageBox.addButton(tr("Download"), QMessageBox::AcceptRole);
QAbstractButton *addButton = messageBox.addButton(tr("Add to Current Document"), QMessageBox::AcceptRole);
messageBox.exec();
if (messageBox.clickedButton() == addButton)
{
UBApplication::applicationController->showBoard();
UBApplication::boardController->downloadURL(reply->request().url());
return;
}
else
{
isPDF = false;
}
}
if (!isPDF && reply->error() == QNetworkReply::NoError)
{
if(contentType == "application/widget")
WBBrowserWindow::downloadManager()->handleUnsupportedContent(reply,false, UBSettings::settings()->userGipLibraryDirectory());
else
WBBrowserWindow::downloadManager()->handleUnsupportedContent(reply);
return;
}
QFile file;
file.setFileName(isPDF ? QLatin1String(":/webbrowser/object-wrapper.html") : QLatin1String(":/webbrowser/notfound.html"));
bool isOpened = file.open(QIODevice::ReadOnly);
Q_ASSERT(isOpened);
QString html;
if (isPDF)
{
html = QString(QLatin1String(file.readAll()))
.arg(tr("PDF"))
.arg("application/x-ub-pdf")
.arg(reply->url().toString());
}
else
{
QString title = tr("Error loading page: %1").arg(reply->url().toString());
html = QString(QLatin1String(file.readAll()))
.arg(title)
.arg(reply->errorString())
.arg(reply->url().toString());
}
QList<QWebFrame*> frames;
frames.append(mainFrame());
while (!frames.isEmpty())
{
QWebFrame *frame = frames.takeFirst();
if (frame->url() == reply->url())
{
frame->setHtml(html, reply->url());
return;
}
QList<QWebFrame *> children = frame->childFrames();
foreach(QWebFrame *frame, children)
frames.append(frame);
}
if (mLoadingUrl == reply->url())
{
mainFrame()->setHtml(html, reply->url());
}
}
void ShortLocater::on_Internal_clicked()
{
/*
IPsoc->resetRelays();
usleep(500);
IPsoc->writeSerial(0x42);
IPsoc->writeSerial(0x9);
usleep(500);
IPsoc->writeSerial(0x42);
IPsoc->writeSerial(0x15);
usleep(500);
IPsoc->writeSerial(0x42);
IPsoc->writeSerial(0x13);
*/ IPsoc->switchFly();
ui.Internal->setVisible(false);
ui.External->setVisible(true);
ui.ah1_inner->setVisible(false);
ui.ah1_outer->setStyleSheet("border:1px solid gray;border-radius:20px;image: url(:/fp_images/bnc.png);");
ui.ah1_outer->setGeometry(22,26,41,41);
ui.ah2_inner->setVisible(false);
ui.ah2_outer->setStyleSheet("border:1px solid gray;border-radius:20px;image: url(:/fp_images/bnc.png);");
ui.ah2_outer->setGeometry(96,26,41,41);
ui.ah3_inner->setVisible(false);
ui.ah3_outer->setStyleSheet("border:1px solid gray;border-radius:20px;image: url(:/fp_images/bnc.png);");
ui.ah3_outer->setGeometry(167,26,41,41);
ui.ah0_inner->setVisible(false);
ui.ah0_outer->setStyleSheet("border:1px solid gray;border-radius:20px;image: url(:/fp_images/bnc.png);");
ui.ah0_outer->setGeometry(237,26,41,41);
ui.fp_VI1_ICM_SL->setGeometry(24,20,41,41);
ui.fp_VI1_ICM_SL->setStyleSheet("border:1px solid gray;border-radius:20px;image: url(:/new/prefix1/Button-Blank-Gray-icon.png);");
ui.fp_VI2_EXT->setGeometry(110,20,41,41);
ui.fp_VI2_EXT->setStyleSheet("border:1px solid gray;border-radius:20px;image: url(:/new/prefix1/Button-Blank-Gray-icon.png);");
QStringList stringList;
bool ok=true;
QFile textFile;
if(ui.External->isVisible())
textFile.setFileName("shortValuesE.txt");
if(ui.Internal->isVisible())
textFile.setFileName("shortValuesI.txt");
if (textFile.open(QIODevice::ReadOnly))
{
QTextStream textStream(&textFile);
while (!textStream.atEnd())
{
stringList.append(textStream.readLine());
}
r200EShortValue=stringList.value(0).toDouble(&ok);
qDebug()<<"200E Short Value:"<<r200EShortValue;
r2EShortValue=stringList.value(1).toDouble(&ok);
qDebug()<<"2E Short Value:"<<r2EShortValue;
r200mEShortValue=stringList.value(2).toDouble(&ok);
qDebug()<<"200mE Short Value:"<<r200mEShortValue;
}else{
r200EShortValue=r200mEShortValue=r2EShortValue=0.0;
}
}
void Player::playIndex(int index, int listIndex)
{
qDebug() << "PlayIndex,index: " << index << "listIndex: " << listIndex;
if(listIndex > -1) {
if(currentListIndex != listIndex || !listSync) {
setList(parser->sources[listIndex]);
currentListIndex = listIndex;
}
}
if(index > playList.size() - 1)
index = 0;
prevIndex = curIndex;
curIndex = index;
mediaObject->stop();
setState(Player::STOPED);
buffer->close();
buffer->setData("");
buffer = new QBuffer(mediaObject);
QFile file;
QDir::setCurrent(savePath);
QString fileName = playList[curIndex]["artist"]+" - "+playList[curIndex]["title"]+"__"+playList[curIndex]["opt4"]+".mp3";
fileName.replace(QRegExp("[?*/\"<>]"), "_");
file.setFileName(fileName);
if(file.open(QIODevice::ReadOnly)) {
emit bufferProgress(1, 1);
//buffer->setData(file.readAll());
//buffer->open(QBuffer::ReadWrite);
if(obCreated) {
nReply->reset();
if(nReply->isRunning())
nReply->abort();
}
mediaObject->stop();
mediaObject->setCurrentSource(Phonon::MediaSource(fileName));
mediaObject->play();
setState(Player::PLAY);
ob2Created = true;
} else {
if(bufferOff)
{
emit bufferProgress(-1, -1);
mediaObject->stop();
mediaObject->setCurrentSource(Phonon::MediaSource(playList[curIndex]["link"]));
mediaObject->play();
setState(Player::PLAY);
} else {
blockNum = 0;
QNetworkRequest req;
req.setUrl(QUrl(playList[curIndex]["link"]));
if(obCreated) {
if(nReply->isRunning())
nReply->abort();
}
canPlay = false;
nReply = nManager.get(req);
connect(nReply, SIGNAL(readyRead()), this, SLOT(readData()));
connect(nReply, SIGNAL(downloadProgress(qint64,qint64)), this, SLOT(dProgress(qint64,qint64)));
connect(nReply, SIGNAL(finished()), this, SLOT(rFinished()));
connect(nReply, SIGNAL(error(QNetworkReply::NetworkError)), this, SLOT(nError(QNetworkReply::NetworkError)));
obCreated = true;
}
}
file.close();
emit curSong(playList[curIndex], curIndex, autoNext);
autoNext = false;
QRegExp rx("(.*):(.*)"); // Сиськиии!)
rx.indexIn(playList[curIndex]["duration"]);
QString c1 = rx.capturedTexts()[1];
QString c2 = rx.capturedTexts()[2];
int dur1 = c1.toInt();
int dur2 = c2.toInt();
duration = dur1 * 60;
duration += dur2;
}
int LoadController::exec()
{
clean();
QFile zeus (filename());
if(!zeus.open(QIODevice::ReadOnly))
{
return -1;
}
QDomDocument hera;
if(!hera.setContent(&zeus))
{
return -2;
}
QDomElement athena = hera.documentElement();
QDomNodeList hermes = athena.elementsByTagName("user");
for(int appolon = 0; appolon < hermes.size(); appolon++)
{
QDomElement gaia = hermes.at(appolon).toElement();
UserSPointer ares = UserController::user(cypher(gaia.elementsByTagName("username").at(0).toElement().text(), 57));
if(ares)
ares->setType((User::UserType)cypher(gaia.elementsByTagName("type").at(0).toElement().text(), 95).toInt());
}
hermes = athena.elementsByTagName("category");
for(int apollon = 0; apollon < hermes.size(); apollon++)
{
if(hermes.at(apollon).parentNode().toElement().tagName() != "subCategory")
{
CategorySPointer ares(new Category);
QDomElement aphrodite = hermes.at(apollon).toElement();
ares->load(aphrodite);
if(!categories().contains(ares->name()))
addCategory(ares);
}
}
hermes = athena.elementsByTagName("entry");
for(int apollon = 0; apollon < hermes.size(); apollon++)
{
if(hermes.at(apollon).parentNode().toElement().tagName() != "subMedia")
{
MediaSPointer ares(new Media);
QDomElement aphrodite = hermes.at(apollon).toElement();
ares->load(aphrodite, AbstractController::categories());
if(!medias().contains(qMakePair(ares->category()->name(),ares->name())))
{
ares->category()->addAssociations(ares);
addMedia(ares);
}
}
}
zeus.close();
return 0;
}
