Пример #1
2
inline void load(
    Archive & ar,
    STD::vector<bool, Allocator> &t,
    const unsigned int /* file_version */
){
    // retrieve number of elements
    unsigned int count;
    ar >> BOOST_SERIALIZATION_NVP(count);
    t.clear();
    while(count-- > 0){
        bool i;
        ar >> boost::serialization::make_nvp("item", i);
        t.push_back(i);
    }
}
Пример #2
1
u32 ChatBuffer::formatChatLine(const ChatLine& line, u32 cols,
		std::vector<ChatFormattedLine>& destination) const
{
	u32 num_added = 0;
	std::vector<ChatFormattedFragment> next_frags;
	ChatFormattedLine next_line;
	ChatFormattedFragment temp_frag;
	u32 out_column = 0;
	u32 in_pos = 0;
	u32 hanging_indentation = 0;

	// Format the sender name and produce fragments
	if (!line.name.empty())
	{
		temp_frag.text = L"<";
		temp_frag.column = 0;
		//temp_frag.bold = 0;
		next_frags.push_back(temp_frag);
		temp_frag.text = line.name;
		temp_frag.column = 0;
		//temp_frag.bold = 1;
		next_frags.push_back(temp_frag);
		temp_frag.text = L"> ";
		temp_frag.column = 0;
		//temp_frag.bold = 0;
		next_frags.push_back(temp_frag);
	}

	std::wstring name_sanitized = sanitizeChatString(line.name);
	// Choose an indentation level
	if (line.name.empty())
	{
		// Server messages
		hanging_indentation = 0;
	}
	else if (name_sanitized.size() + 3 <= cols/2)
	{
		// Names shorter than about half the console width
		hanging_indentation = name_sanitized.size() + 3;
	}
	else
	{
		// Very long names
		hanging_indentation = 2;
	}
	FMColoredString line_text(line.text);

	next_line.first = true;
	bool text_processing = false;

	// Produce fragments and layout them into lines
	while (!next_frags.empty() || in_pos < line_text.size())
	{
		// Layout fragments into lines
		while (!next_frags.empty())
		{
			ChatFormattedFragment& frag = next_frags[0];
			if (frag.text.size() <= cols - out_column)
			{
				// Fragment fits into current line
				frag.column = out_column;
				next_line.fragments.push_back(frag);
				out_column += frag.text.size();
				next_frags.erase(next_frags.begin());
			}
			else
			{
				// Fragment does not fit into current line
				// So split it up
				temp_frag.text = frag.text.substr(0, cols - out_column);
				temp_frag.column = out_column;
				//temp_frag.bold = frag.bold;
				next_line.fragments.push_back(temp_frag);
				frag.text = frag.text.substr(cols - out_column);
				out_column = cols;
			}
			if (out_column == cols || text_processing)
			{
				// End the current line
				destination.push_back(next_line);
				num_added++;
				next_line.fragments.clear();
				next_line.first = false;

				out_column = text_processing ? hanging_indentation : 0;
			}
		}

		// Produce fragment
		if (in_pos < line_text.size())
		{
			u32 remaining_in_input = line_text.size() - in_pos;
			u32 remaining_in_output = cols - out_column;

			// Determine a fragment length <= the minimum of
			// remaining_in_{in,out}put. Try to end the fragment
			// on a word boundary.
			u32 frag_length = 1, space_pos = 0;
			while (frag_length < remaining_in_input &&
					frag_length < remaining_in_output)
			{
				if (std::isspace(line_text.getString()[in_pos + frag_length]))
					space_pos = frag_length;
				++frag_length;
			}
			if (space_pos != 0 && frag_length < remaining_in_input)
				frag_length = space_pos + 1;

			temp_frag.text = line_text.substr(in_pos, frag_length);
			temp_frag.column = 0;
			//temp_frag.bold = 0;
			next_frags.push_back(temp_frag);
			in_pos += frag_length;
			text_processing = true;
		}
	}

	// End the last line
	if (num_added == 0 || !next_line.fragments.empty())
	{
		destination.push_back(next_line);
		num_added++;
	}

	return num_added;
}
Пример #3
0
sframe groupby_aggregate(const sframe& source,
      const std::vector<std::string>& keys,
      const std::vector<std::string>& output_column_names,
      const std::vector<std::pair<std::vector<std::string>,
                                  std::shared_ptr<group_aggregate_value>>>& groups,
      size_t max_buffer_size) {
  // first, sanity checks
  // check that group keys exist
  if (output_column_names.size() != groups.size()) {
    log_and_throw("There must be as many output columns as there are groups");
  }
  {
    // check that output column names are all unique, and do not intersect with
    // keys. Since empty values will be automatically assigned, we will skip
    // those.
    std::set<std::string> all_output_columns(keys.begin(), keys.end());
    size_t named_column_count = 0;
    for (auto s: output_column_names) {
      if (!s.empty()) {
        all_output_columns.insert(s);
        ++named_column_count;
      }
    }
    if (all_output_columns.size() != keys.size() + named_column_count) {
      log_and_throw("Output columns names are not unique");
    }
  }

  for (const auto& key: keys) {
    // check that the column name is valid
    if (!source.contains_column(key)) {
      log_and_throw("SFrame does not contain column " + key);
    }
  }

  // check that each group is valid
  for (const auto& group: groups) {
    // check that the column name is valid
    if (group.first.size() > 0) {
      for(size_t index = 0; index < group.first.size();index++) { 
        auto& col_name = group.first[index];
        if (!source.contains_column(col_name)) {
          log_and_throw("SFrame does not contain column " + col_name);
        }

        if(graphlab::registered_arg_functions.count(group.second->name()) != 0 && index > 0) 
          continue; 
        // check that the types are valid
        size_t column_number = source.column_index(col_name);
        if (!group.second->support_type(source.column_type(column_number))) {
          log_and_throw("Requested operation: " + group.second->name() +
                        " not supported on the type of column " + col_name);
        }
      }
    }
  }

  // key should not have repeated columns
  std::set<std::string> key_columns;
  std::set<std::string> group_columns;
  for (const auto& key: keys) key_columns.insert(key);
  for (const auto& group: groups) {
    for(auto& col_name : group.first) {
      group_columns.insert(col_name);
    }
  }
  if (key_columns.size() != keys.size()) {
      log_and_throw("Group by key cannot have repeated column names");
  }

  // ok. select out just the columns I care about
  // begin with the key columns
  std::vector<std::string> all_columns(key_columns.begin(), key_columns.end());
  // then all the group columns (as long as they are not also key columns)
  for (const auto& group_column: group_columns) {
    if (group_column != "" && key_columns.count(group_column) == 0) {
      all_columns.push_back(group_column);
    }
  }
  sframe frame_with_relevant_cols = source.select_columns(all_columns);

  // prepare the output frame
  sframe output;
  std::vector<std::string> column_names;
  std::vector<flex_type_enum> column_types;
  // output frame has the key column name and types
  for (const auto& key: key_columns) {
    column_names.push_back(key);
    column_types.push_back(source.column_type(source.column_index(key)));
  }

  // then for each group, make a unique name and determine the output group type
  for (size_t i = 0;i < groups.size(); ++i) {
    const auto& group = groups[i];
    std::string candidate_name = output_column_names[i];
    if (candidate_name.empty()) {
      std::string root_candidate_name;
      if(graphlab::registered_arg_functions.count(group.second->name()) == 0) { 
        for (auto& col_name: group.first) {
          if (root_candidate_name.empty()) {
            root_candidate_name += " of " + col_name;
          } else {
            root_candidate_name += "_" + col_name;
          }
        }  
        root_candidate_name = group.second->name() + root_candidate_name;
      } else {
        
        if(group.first.size() != 2) 
          log_and_throw("arg functions takes exactly two arguments");
        root_candidate_name += group.first[1] + " for " + group.second->name() + " of " + group.first[0];  
      }
      candidate_name = root_candidate_name;
      size_t ctr = 1;
      // keep trying to come up with a unique column name
      while (std::find(column_names.begin(),
                       column_names.end(),
                       candidate_name) != column_names.end()) {
        candidate_name = root_candidate_name + "." + std::to_string(ctr);
        ++ctr;
      }
    }
    column_names.push_back(candidate_name);

    std::vector<flex_type_enum> input_types;
    for(auto col_name : group.first) {
      input_types.push_back(source.column_type(source.column_index(col_name)));
    }
    // this statement is valid for argmax and argmin as well, because their 
    // set_input_types(...) simply return input_types. 
    auto output_type = group.second->set_input_types(input_types);
    column_types.push_back(output_type);
  }

  // done! now we can start on the groupby
  size_t nsegments = frame_with_relevant_cols.num_segments();
  // either nsegments, or n*log n buckets
  nsegments = std::max(nsegments,
                       thread::cpu_count() * std::max<size_t>(1, log2(thread::cpu_count())));

  output.open_for_write(column_names,
                        column_types,
                        "",
                        nsegments);


  groupby_aggregate_impl::group_aggregate_container
      container(max_buffer_size, nsegments);

  // ok the input sframe (frame_with_relevant_cols) contains all the values
  // we care about. However, the challenge here is to figure out how the keys
  // and values line up. By construction, all the key columns come first.
  // which is good. But group columns can be pretty much anywhere.
  size_t num_keys = keys.size();
  for (const auto& group: groups) {
    std::vector<size_t> column_numbers;
    for(auto& col_name : group.first) {
      column_numbers.push_back(frame_with_relevant_cols.column_index(col_name));
    }

    container.define_group(column_numbers, group.second);
  }
  // done. now we can begin parallel processing

  // shuffle the rows based on the value of the key column.
  auto input_reader = frame_with_relevant_cols.get_reader(thread::cpu_count());
  graphlab::timer ti;
  logstream(LOG_INFO) << "Filling group container: " << std::endl;
  parallel_for (0, input_reader->num_segments(),
                [&](size_t i) {
                  auto iter = input_reader->begin(i);
                  auto enditer = input_reader->end(i);
                  while(iter != enditer) {
                    auto& row = *iter;
                    container.add(row, num_keys);
                    ++iter;
                  }
                });

  logstream(LOG_INFO) << "Group container filled in " << ti.current_time() << std::endl;
  logstream(LOG_INFO) << "Writing output: " << std::endl;
  ti.start();
  container.group_and_write(output);
  logstream(LOG_INFO) << "Output written in: " << ti.current_time() << std::endl;
  output.close();
  return output;
}
/*
 **************************************************************************
 * Compute Connector widths that this class requires in order to work
 * properly on a given hierarchy.
 **************************************************************************
 */
void
RefineScheduleConnectorWidthRequestor::computeRequiredConnectorWidths(
   std::vector<hier::IntVector>& self_connector_widths,
   std::vector<hier::IntVector>& fine_connector_widths,
   const hier::PatchHierarchy& patch_hierarchy) const
{
   int max_levels = patch_hierarchy.getMaxNumberOfLevels();

   const tbox::Dimension& dim(patch_hierarchy.getDim());

   /*
    * Add one to max data ghost width to create overlaps of data
    * living on patch boundaries.
    */
   const hier::IntVector max_data_gcw(
      patch_hierarchy.getPatchDescriptor()->getMaxGhostWidth(dim) + 1);

   hier::IntVector max_stencil_width =
      patch_hierarchy.getGridGeometry()->getMaxTransferOpStencilWidth(dim);
   max_stencil_width.max(
      RefinePatchStrategy::getMaxRefineOpStencilWidth(dim));

   hier::IntVector zero_vector(hier::IntVector::getZero(dim),
                               patch_hierarchy.getNumberBlocks());

   /*
    * Compute the Connector width needed to ensure all edges are found
    * during mesh recursive refine schedule generation.  It is safe to
    * be conservative, but carrying around a larger than necessary
    * width requires more memory and slows down Connector operations.
    *
    * All Connectors to self need to be at least wide enough to
    * support the copy of data from the same level into ghost cells.
    * Thus, the width should be at least that of the max ghost data
    * width.  On the finest level, there is no other requirement.  For
    * other levels, we need enough width for:
    *
    * - refining the next finer level
    *
    * - refining recursively starting at each of the levels finer than
    *   it.
    */

   hier::IntVector self_width(max_data_gcw * d_gcw_factor,
                              patch_hierarchy.getNumberBlocks()); 
   self_connector_widths.clear();
   self_connector_widths.resize(max_levels, self_width);

   fine_connector_widths.clear();
   if (max_levels > 1) {
      fine_connector_widths.resize(max_levels - 1, zero_vector); // to be computed below.
   }

   /*
    * Note that the following loops go from fine to coarse.  This is
    * because Connector widths for coarse levels depend on those for
    * fine levels.
    */
   for (int ln = max_levels - 1; ln > -1; --ln) {
      computeRequiredFineConnectorWidthsForRecursiveRefinement(
         fine_connector_widths,
         max_data_gcw,
         max_stencil_width,
         patch_hierarchy,
         ln);
   }

}
Пример #5
0
/* Import a graph from a file.
 * Requires:
 * 	@nodes		The list to be filled with the nodes
 * 	@container	The container to put the vertexs
 * 	@edges		The list of edges to be filled
 * 	@fname		The filename
 * Returns:
 * 	true		on success
 * 	false		otherwise
 */
bool TriNavMeshBuilder::importGraph(std::vector<GNode *> &nodes,
		PolyStructsContainer<sm::Vertex *> &container,
		PolyStructsContainer<Triangle *> &triangles,
		std::vector<GEdge *> &edges,
		const Ogre::String &fname)
{
	std::ifstream in;
	in.open(fname.c_str());

	if(!in.is_open()){
		debugERROR("Error while opening the file %s\n", fname.c_str());
		return false;
	}

	if(!container.isEmpty()){
		debugWARNING("Warning, Vertex container is not empty\n");
		ASSERT(false);
	}
	if(!triangles.isEmpty()){
		debugWARNING("Warning, triangles is not empty\n");
		ASSERT(false);
	}

	// first read the vertexs list
	std::vector<sm::Vertex *> vertexs;
	int aux;
	in >> aux;
	ASSERT(aux > 0);
	vertexs.reserve(aux);

	for(int i = 0; i < aux; ++i){
		sm::Vertex *v = new sm::Vertex;
		in >> v->x;
		in >> v->y;
		vertexs.push_back(v);
	}

	ASSERT(in.good());

	// now read the number of nodes
	nodes.clear();
	in >> aux;
	nodes.reserve(aux);
	std::vector<Triangle *> triangVec;
	int i1, i2, i3;
	for(int i = 0; i < aux; ++i){
		in >> i1;
		in >> i2;
		in >> i3;
		ASSERT(i1 < vertexs.size() && i2 < vertexs.size() && i3 < vertexs.size());
		Triangle *t = new Triangle(vertexs[i1], vertexs[i2], vertexs[i3]);
		triangVec.push_back(t);

		GNode *node = new GNode(t);
		nodes.push_back(node);
	}
	ASSERT(in.good());

	// now get all the edges
	edges.clear();
	in >> aux;
	ASSERT(aux > 0);
	edges.reserve(aux);
	bool ok = false;
	float weight;
	for(int i = 0; i < aux; ++i){
		in >> i1;
		in >> i2;
		in >> weight;
		if(i1 >= nodes.size() || i2 >= nodes.size()){
			debugRED("i1: %d, size: %zd, i2: %d, size: %zd\n", i1, nodes.size(),
					i2, nodes.size());
			ASSERT(i1 < nodes.size() && i2 < nodes.size());
		}
		GNode *n1 = nodes[i1], *n2 = nodes[i2];

		GEdge *e = new GEdge(n1,n2);
		ok = n1->setNewEdge(e);
		ASSERT(ok);
		ok = n2->setNewEdge(e);
		ASSERT(ok);
		edges.push_back(e);
		e->setWeight(weight);

	}


	// Save the triangles and the vertexs
	for(int i = vertexs.size()-1; i >= 0; --i){
		container.addObj(vertexs[i]);
	}
	vertexs.clear();

	for(int i = triangVec.size()-1; i >= 0; --i){
		triangles.addObj(triangVec[i]);
	}
	triangVec.clear();


	return true;
}
Пример #6
0
	bool ReportFixture(b2Fixture* fixture){
		foundBodies.push_back(fixture->GetBody());
		return true;
	}
Пример #7
0
CravaTrend::CravaTrend(Simbox                       * timeSimbox,
                       Simbox                       * timeCutSimbox,
                       ModelSettings                * modelSettings,
                       bool                         & failed,
                       std::string                  & errTxt,
                       const InputFiles             * inputFiles)
{

  n_samples_ = 1000;

  const std::vector<std::string> trend_cube_parameters = modelSettings->getTrendCubeParameters();
  const std::vector<int>         trend_cube_type       = modelSettings->getTrendCubeType();
  n_trend_cubes_                                       = static_cast<int>(trend_cube_parameters.size());

  std::vector<std::string> trendCubeNames(n_trend_cubes_);

  if(n_trend_cubes_ > 0) {

    std::string errorText  = "";

    const int nx   = timeSimbox->getnx();
    const int ny   = timeSimbox->getny();
    const int nz   = timeSimbox->getnz();
    const int nxp  = nx;
    const int nyp  = ny;
    const int nzp  = nz;
    const int rnxp = 2*(nxp/2 + 1);

    for(int grid_number=0; grid_number<n_trend_cubes_; grid_number++) {

      FFTGrid * trend_cube = NULL;

      const std::string   log_name   = "trend cube '"+trend_cube_parameters[grid_number]+"'";

      if(trend_cube_type[grid_number] == ModelSettings::CUBE_FROM_FILE) {

        trendCubeNames[grid_number] = inputFiles->getTrendCube(grid_number);

        const SegyGeometry      * dummy1     = NULL;
        const TraceHeaderFormat * dummy2     = NULL;
        const float               offset     = modelSettings->getSegyOffset(0); //Facies estimation only allowed for one time lapse

        ModelGeneral::readGridFromFile(trendCubeNames[grid_number],
                                       log_name,
                                       offset,
                                       trend_cube,
                                       dummy1,
                                       dummy2,
                                       FFTGrid::PARAMETER,
                                       timeSimbox,
                                       timeCutSimbox,
                                       modelSettings,
                                       errorText,
                                       true);

        if(errorText != "") {
          errorText += "Reading of file \'"+trendCubeNames[grid_number]+"\' failed\n";
          errTxt    += errorText;
          failed     = true;
        }
      }

      else if(trend_cube_type[grid_number] == ModelSettings::STRATIGRAPHIC_DEPTH) {

        LogKit::LogFormatted(LogKit::Low,"\nGenerating trend grid \'"+trend_cube_parameters[grid_number]+"\'\n");

        trend_cube = ModelGeneral::createFFTGrid(nx, ny, nz, nxp, nyp, nzp, false);
        trend_cube->createRealGrid();
        trend_cube->setAccessMode(FFTGrid::WRITE);

        for(int k=0; k<nzp; k++) {
          for(int j=0; j<nyp; j++) {
            for(int i=0; i<rnxp; i++) {
              if(i < nx)
                trend_cube->setRealValue(i, j, k, static_cast<float>(k));
              else
                trend_cube->setRealValue(i, j, k, 0);
            }
          }
        }

        trend_cube->endAccess();
      }

      else if(trend_cube_type[grid_number] == ModelSettings::TWT) {

        LogKit::LogFormatted(LogKit::Low,"\nGenerating trend grid \'"+trend_cube_parameters[grid_number]+"\'\n");

        trend_cube = ModelGeneral::createFFTGrid(nx, ny, nz, nxp, nyp, nzp, false);
        trend_cube->createRealGrid();
        trend_cube->setAccessMode(FFTGrid::WRITE);

        for(int k=0; k<nzp; k++) {
          for(int j=0; j<nyp; j++) {
            for(int i=0; i<rnxp; i++) {
              if(i < nx) {
                float value = static_cast<float>(timeSimbox->getTop(i,j) + timeSimbox->getdz(i,j)*k);
                trend_cube->setRealValue(i, j, k, value);
              }
              else
                trend_cube->setRealValue(i, j, k, 0);
            }
          }
        }
        trend_cube->endAccess();
      }

      NRLib::Grid<double> grid_cube(nx, ny, nz);

      for(int k=0; k<nzp; k++) {
        for(int j=0; j<nyp; j++) {
          for(int i=0; i<rnxp; i++) {
            if (i < nx && j < ny && k < nz)
              grid_cube(i,j,k) = trend_cube->getRealValue(i,j,k);
          }
        }
      }

      trend_cubes_.push_back(grid_cube);


      // Calculate trend_cube_sampling_
      // Sample all trends from min to max of the trend cube, using increment_ in the sampling

      trend_cube->calculateStatistics();

      const float  max       = trend_cube->getMaxReal();
      const float  min       = trend_cube->getMinReal();
      const double increment = (max-min)/(n_samples_-1);

      std::vector<double> sampling(n_samples_);

      for(int j=0; j<n_samples_-1; j++)
        sampling[j] = min + j*increment;

      sampling[n_samples_-1] = max;

      trend_cube_sampling_.push_back(sampling);


      if((modelSettings->getOutputGridsOther() & IO::TREND_CUBES) > 0) {
        std::string fileName = IO::PrefixTrendCubes() + trend_cube_parameters[grid_number];
        writeToFile(timeSimbox, trend_cube, fileName, "trend cube");
      }

      delete trend_cube;

    }
  }
}
Пример #8
0
bool basic_router_setup()
{
    sai_status_t status;

    // setup saiport for each ethport
    LOGG(TEST_INFO, SETL3, "sai_switch_api->get_switch_attribute SAI_SWITCH_ATTR_PORT_NUMBER\n");

    sai_attribute_t attr;
    attr.id = SAI_SWITCH_ATTR_PORT_NUMBER;
    status = sai_switch_api->get_switch_attribute(1, &attr);

    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to get SAI_SWITCH_ATTR_PORT_NUMBER %d", -status);
        return false;
    }

    LOGG(TEST_DEBUG, SETL3, "SAI_SWITCH_ATTR_PORT_NUMBER %d\n", attr.value.u32);

    sai_uint32_t port_count = attr.value.u32;

    //We will cover all of the ports supoorted
    g_testcount = port_count;

    sai_object_id_t *port_list = new sai_object_id_t[port_count];

    LOGG(TEST_INFO, SETL3, "sai_switch_api->get_switch_attribute SAI_SWITCH_ATTR_PORT_LIST\n");

    attr.id = SAI_SWITCH_ATTR_PORT_LIST;
    attr.value.objlist.count = port_count;
    attr.value.objlist.list = port_list;
    status = sai_switch_api->get_switch_attribute(1, &attr);

    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to get SAI_SWITCH_ATTR_PORT_LIST %d", -status);
        return false;
    }

   
    unsigned int i = 0;
    sai_object_id_t vlan_member_id;
    
     while (!vlan_member_list.empty()) {
        vlan_member_id = vlan_member_list.back();
        if (!SAI_OID_TYPE_CHECK(vlan_member_id, SAI_OBJECT_TYPE_VLAN_MEMBER))
        {
            LOGG(TEST_ERR, SETL3, "vlan_member_id retrieved is not the right type%d", -status);
            return false;
        }
        
        LOGG(TEST_INFO, SETL3, "sai_vlan_api->remove_vlan_member\n");
        status = sai_vlan_api->remove_vlan_member(vlan_member_id);
        if (status != SAI_STATUS_SUCCESS )
        {
            LOGG(TEST_ERR, SETL3, "fail to remove member ports from vlan 1. status=0x%x\n",  -status);
            return false;
        }
        vlan_member_list.pop_back();
    }
    LOGG(TEST_INFO, SETL3, "sai_hif_api->set_trap_attribute SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION, TTL_ERROR\n");
    attr.id = SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION;
    attr.value.s32 = SAI_PACKET_ACTION_TRAP;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_TTL_ERROR, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to trap ttl=1 packets to cpu. status=0x%x\n", -status);
        return false;
    }
    attr.id = SAI_HOSTIF_TRAP_ATTR_TRAP_CHANNEL;
    attr.value.s32 = SAI_HOSTIF_TRAP_CHANNEL_NETDEV;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_TTL_ERROR, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to set trap channel for SAI_HOSTIF_TRAP_ID_TTL_ERROR. status=0x%x\n", -status);
        return false;
    }
    LOGG(TEST_DEBUG, SETL3, "set SAI_HOSTIF_TRAP_ID_TTL_ERROR \n");


    LOGG(TEST_INFO, SETL3, "sai_hif_api->set_trap_attribute SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION, ARP_REQUEST\n");
    attr.id = SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION;
    attr.value.s32 = SAI_PACKET_ACTION_TRAP;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_ARP_REQUEST, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to trap arp request packets to cpu. status=0x%x\n", -status);
        return false;
    }
    attr.id = SAI_HOSTIF_TRAP_ATTR_TRAP_CHANNEL;
    attr.value.s32 = SAI_HOSTIF_TRAP_CHANNEL_NETDEV;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_ARP_REQUEST, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to set trap channel for SAI_HOSTIF_TRAP_ID_ARP_REQUEST. status=0x%x\n", -status);
        return false;
    }
    LOGG(TEST_DEBUG, SETL3, "set SAI_HOSTIF_TRAP_ID_ARP_REQUEST \n");


    LOGG(TEST_INFO, SETL3, "sai_hif_api->set_trap_attribute SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION, ARP_RESPONSE\n");
    attr.id = SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION;
    attr.value.s32 = SAI_PACKET_ACTION_TRAP;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_ARP_RESPONSE, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to trap arp reply packets to cpu. status=0x%x\n", -status);
        return false;
    }
    attr.id = SAI_HOSTIF_TRAP_ATTR_TRAP_CHANNEL;
    attr.value.s32 = SAI_HOSTIF_TRAP_CHANNEL_NETDEV;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_ARP_RESPONSE, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to set trap channel for SAI_HOSTIF_TRAP_ID_ARP_RESPONSE. status=0x%x\n", -status);
        return false;
    }
    LOGG(TEST_DEBUG, SETL3, "set SAI_HOSTIF_TRAP_ID_ARP_RESPONSE \n");


    LOGG(TEST_INFO, SETL3, "sai_hif_api->set_trap_attribute SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION, LLDP\n");
    attr.id = SAI_HOSTIF_TRAP_ATTR_PACKET_ACTION;
    attr.value.s32 = SAI_PACKET_ACTION_TRAP;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_LLDP, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to trap lldp packets to cpu. status=0x%x\n", -status);
        return false;
    }
    attr.id = SAI_HOSTIF_TRAP_ATTR_TRAP_CHANNEL;
    attr.value.s32 = SAI_HOSTIF_TRAP_CHANNEL_NETDEV;
    status = sai_hif_api->set_trap_attribute(SAI_HOSTIF_TRAP_ID_LLDP, &attr);
    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to set trap channel for SAI_HOSTIF_TRAP_ID_LLDP. status=0x%x\n", -status);
        return false;
    }
    LOGG(TEST_DEBUG, SETL3, "set SAI_HOSTIF_TRAP_ID_LLDP \n");


    LOGG(TEST_INFO, SETL3, "sai_vr_api->create_virtual_router\n");
    status = sai_vr_api->create_virtual_router(&g_vr_id, 0, NULL);

    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to create virtual router. status=0x%x", -status);
        return false;
    }

    if (!SAI_OID_TYPE_CHECK(g_vr_id, SAI_OBJECT_TYPE_VIRTUAL_ROUTER))
    {
        LOGG(TEST_ERR, SETL3, "virtual router oid generated is not the right type\n");
        return false;
    }

    LOGG(TEST_DEBUG, SETL3, "virtual rounter id 0x%lx\n", g_vr_id);


    LOGG(TEST_INFO, SETL3, "for each port, sai_port_api->set_port_attribute SAI_PORT_ATTR_ADMIN_STATE true\n");
    LOGG(TEST_INFO, SETL3, "for each port, sai_port_api->set_port_attribute, SAI_PORT_ATTR_FDB_LEARNING, SAI_PORT_LEARN_MODE_HW\n");

    for (i = 0; i < port_count; i++)
    {
        attr.id = SAI_PORT_ATTR_ADMIN_STATE;
        attr.value.booldata = true;
        sai_status_t status = sai_port_api->set_port_attribute(port_list[i], &attr);

        if (status != SAI_STATUS_SUCCESS)
        {
            LOGG(TEST_ERR, SETL3, "fail to set port 0x%lx admin state to UP: %d\n", port_list[i], -status);
            return false;
        }

        attr.id = SAI_PORT_ATTR_FDB_LEARNING;
        attr.value.s32 = SAI_PORT_LEARN_MODE_HW;
        status = sai_port_api->set_port_attribute(port_list[i], &attr);

        if (status != SAI_STATUS_SUCCESS)
        {
            LOGG(TEST_ERR, SETL3, "fail to set port 0x%lx learning mode to hw: %d\n", port_list[i], -status);
            return false;
        }
    }

    //one interface for each port
    for (i = 0; i < g_testcount; i++)
    {
        g_intfAlias[i] = "et0_" + to_string(i + 1);
        g_ipAddr[i] = IpAddress("10.10." + to_string(140 + i + 1) + "." + to_string(130));
        g_ipMask[i] = IpAddress("255.255.255.252");
        g_macAddr[i] = MacAddress("00:11:11:11:11:" + to_string(i + 1));
    }

    for (i = 0; i < g_testcount; i++)
    {

        LOGG(TEST_DEBUG, SETL3, "--- interface %s %s/%s %s ---\n",
             g_intfAlias[i].c_str(),
             g_ipAddr[i].to_string().c_str(),
             g_ipMask[i].to_string().c_str(),
             g_macAddr[i].to_string().c_str()
            );
        std::vector<sai_object_id_t> port_objlist;
        long unsigned int vlanid;
        sai_attribute_t attr;
        std::vector<sai_attribute_t> attr_list;

        //assuming interface is of PANEL_INTF
        vlanid = PANEL_PORT_VLAN_START + i + 1;

        port_objlist.push_back(port_list[i]);

        if (!setup_one_l3_interface(vlanid, port_objlist.size(), port_objlist.data(),
                                    g_macAddr[i], g_ipAddr[i], g_ipMask[i], g_rif_id[i]))
        {
            LOGG(TEST_ERR, SETL3, "fail to setup l3 interface for %s\n", g_intfAlias[i].c_str());
            return false;
        }

        LOGG(TEST_DEBUG, SETL3, "setup_l3_interface for %s successfully\n",
             g_intfAlias[i].c_str());

        attr.id = SAI_HOSTIF_ATTR_TYPE;
        attr.value.s32 = SAI_HOSTIF_TYPE_NETDEV;
        attr_list.push_back(attr);

        attr.id = SAI_HOSTIF_ATTR_RIF_OR_PORT_ID;
        attr.value.oid = port_list[i];
        attr_list.push_back(attr);

        attr.id = SAI_HOSTIF_ATTR_NAME;
        strncpy((char *)&attr.value.chardata, g_intfAlias[i].c_str(), HOSTIF_NAME_SIZE);
        attr_list.push_back(attr);

        LOGG(TEST_INFO, SETL3, "sai_hif_api->create_hostif name %s\n", g_intfAlias[i].c_str());
        sai_object_id_t hif_id;
        status = sai_hif_api->create_hostif(&hif_id, attr_list.size(), attr_list.data());

        if (status != SAI_STATUS_SUCCESS)
        {
            LOGG(TEST_ERR, SETL3, "fail to create host interface name %s: %d\n",
                 g_intfAlias[i].c_str(), -status);
            return false;
        }

        if (!SAI_OID_TYPE_CHECK(hif_id, SAI_OBJECT_TYPE_HOST_INTERFACE))
        {
            LOGG(TEST_ERR, SETL3, "host interface oid generated is not the right type\n");
            return false;
        }

        LOGG(TEST_DEBUG, SETL3, "hif_id 0x%lx \n", hif_id);
    }

    LOGG(TEST_DEBUG, SETL3, "--- end of loof of interface ---\n");

    for (i = 0; i < g_testcount; i++)
    {
        g_dst_mac[i] = MacAddress("00:22:22:22:22:" + to_string(i + 1));
    }


    fdb_mgr->Show();

    for (i = 0; i < g_testcount; i++)
    {
        if (! fdb_mgr->Add(g_dst_mac[i], PANEL_PORT_VLAN_START + i + 1,
                           SAI_FDB_ENTRY_STATIC, port_list[i], SAI_PACKET_ACTION_FORWARD))
        {

            LOGG(TEST_ERR, SETL3, "fail to create sai_fdb_entry {mac %-15s vlan_id %hu}\n",
                 g_dst_mac[i].to_string().c_str(), PANEL_PORT_VLAN_START + i + 1);
            return false;
        }
    }

    fdb_mgr->Show();

    return true;
}
Пример #9
0
  unsigned long
  StaticRangeCoder::encodeCharVectorToStream (const std::vector<char>& inputByteVector_arg,
                                              std::ostream& outputByteStream_arg)
  {
    DWord freq[257];
    uint8_t ch;
    int i, f;
    char out;

    // define numerical limits
    const DWord top = (DWord)1 << 24;
    const DWord bottom = (DWord)1 << 16;
    const DWord maxRange = (DWord)1 << 16;

    DWord low, range;

    unsigned int input_size;
    input_size = inputByteVector_arg.size ();

    unsigned int readPos;

    unsigned long streamByteCount;

    streamByteCount = 0;

    // init output vector
    outputCharVector_.clear();
    outputCharVector_.reserve(sizeof(char) * input_size);

    uint64_t FreqHist[257];

    // calculate frequency table
    memset (FreqHist, 0, sizeof(FreqHist));
    readPos = 0;
    while (readPos < input_size)
    {
      uint8_t symbol = (uint8_t)inputByteVector_arg[readPos++];
      FreqHist[symbol + 1]++;
    }

    // convert to cumulative frequency table
    freq[0] = 0;
    for (f = 1; f <= 256; f++)
    {
      freq[f] = freq[f - 1] + (DWord)FreqHist[f];
      if (freq[f] <= freq[f - 1])
        freq[f] = freq[f - 1] + 1;
    }

    // rescale if numerical limits are reached
    while (freq[256] >= maxRange)
    {
      for (f = 1; f <= 256; f++)
      {
        freq[f] /= 2;
        ;
        if (freq[f] <= freq[f - 1])
          freq[f] = freq[f - 1] + 1;
      }
    }

    // write cumulative  frequency table to output stream
    outputByteStream_arg.write ((const char *)&freq[0], sizeof(freq));
    streamByteCount += sizeof(freq);

    readPos = 0;

    low = 0;
    range = (DWord)-1;

    // start encoding
    while (readPos < input_size)
    {

      // read symol
      ch = inputByteVector_arg[readPos++];

      // map to range
      low += freq[ch] * (range /= freq[256]);
      range *= freq[ch + 1] - freq[ch];

      // check range limits
      while ((low ^ (low + range)) < top || ((range < bottom) && ((range = -low & (bottom - 1)), 1)))
      {
        out = low >> 24;
        range <<= 8;
        low <<= 8;
        outputCharVector_.push_back(out);
      }

    }

    // flush remaining data
    for (i = 0; i < 4; i++)
    {
      out = low >> 24;
      outputCharVector_.push_back(out);
      low <<= 8;
    }

    // write encoded data to stream
    outputByteStream_arg.write (&outputCharVector_[0], outputCharVector_.size());

    streamByteCount += outputCharVector_.size();

    return streamByteCount;

  }
Пример #10
0
  unsigned long
  StaticRangeCoder::decodeStreamToIntVector (std::istream& inputByteStream_arg,
                                             std::vector<unsigned int>& outputIntVector_arg)
  {
    uint8_t ch;
    unsigned int i, f;

    // define range limits
    const uint64_t top = (uint64_t)1 << 56;
    const uint64_t bottom = (uint64_t)1 << 48;

    uint64_t low, range;
    uint64_t code;

    unsigned int outputBufPos;
    unsigned long output_size;

    uint64_t frequencyTableSize;
    unsigned char frequencyTableByteSize;

    unsigned long streamByteCount;

    streamByteCount = 0;

    outputBufPos = 0;
    output_size = outputIntVector_arg.size ();

    // read size of cumulative frequency table from stream
    inputByteStream_arg.read ((char*)&frequencyTableSize, sizeof(frequencyTableSize));
    inputByteStream_arg.read ((char*)&frequencyTableByteSize, sizeof(frequencyTableByteSize));

    streamByteCount += sizeof(frequencyTableSize)+sizeof(frequencyTableByteSize);

    // check size of frequency table vector
    if (cFreqTable_.size () < frequencyTableSize)
    {
      cFreqTable_.resize (frequencyTableSize);
    }

    // init with zero
    memset (&cFreqTable_[0], 0, sizeof(uint64_t) * frequencyTableSize);

    // read cumulative frequency table
    for (f = 1; f < frequencyTableSize; f++)
    {
      inputByteStream_arg.read ((char *)&cFreqTable_[f], frequencyTableByteSize);
      streamByteCount += frequencyTableByteSize;
    }

    // initialize range & code
    code = 0;
    low = 0;
    range = (uint64_t)-1;

    // init code vector
    for (i = 0; i < 8; i++)
    {
      inputByteStream_arg.read ((char*)&ch, sizeof(char));
      streamByteCount += sizeof(char);
      code = (code << 8) | ch;
    }

    // decoding
    for (i = 0; i < output_size; i++)
    {
      uint64_t count = (code - low) / (range /= cFreqTable_[frequencyTableSize - 1]);

      // symbol lookup in cumulative frequency table
      uint64_t symbol = 0;
      uint64_t sSize = (frequencyTableSize - 1) / 2;
      while (sSize > 0)
      {
        if (cFreqTable_[symbol + sSize] <= count)
        {
          symbol += sSize;
        }
        sSize /= 2;
      }

      // write symbol to output stream
      outputIntVector_arg[outputBufPos++] = symbol;

      // map to range
      low += cFreqTable_[symbol] * range;
      range *= cFreqTable_[symbol + 1] - cFreqTable_[symbol];

      // check range limits
      while ((low ^ (low + range)) < top || ((range < bottom) && ((range = -low & (bottom - 1)), 1)))
      {
        inputByteStream_arg.read ((char*)&ch, sizeof(char));
        streamByteCount += sizeof(char);
        code = code << 8 | ch;
        range <<= 8;
        low <<= 8;
      }

    }

    return streamByteCount;


  }
Пример #11
0
  unsigned long
  StaticRangeCoder::encodeIntVectorToStream (std::vector<unsigned int>& inputIntVector_arg,
                                             std::ostream& outputByteStream_arg)
  {

    unsigned int inputsymbol;
    unsigned int i, f;
    char out;

    uint64_t frequencyTableSize;
    uint8_t frequencyTableByteSize;

    // define numerical limits
    const uint64_t top = (uint64_t)1 << 56;
    const uint64_t bottom = (uint64_t)1 << 48;
    const uint64_t maxRange = (uint64_t)1 << 48;

    unsigned long input_size = (unsigned) inputIntVector_arg.size ();
    uint64_t low, range;

    unsigned int inputSymbol;

    unsigned int readPos;

    unsigned long streamByteCount;

    streamByteCount = 0;

    // init output vector
    outputCharVector_.clear();
    outputCharVector_.reserve(sizeof(char) * input_size * 2);

    frequencyTableSize = 1;

    readPos = 0;

    // calculate frequency table
    cFreqTable_[0] = cFreqTable_[1] = 0;
    while (readPos < input_size)
    {
      inputSymbol = inputIntVector_arg[readPos++];

      if (inputSymbol + 1 >= frequencyTableSize)
      {
        // frequency table is to small -> adaptively extend it
        uint64_t oldfrequencyTableSize;
        oldfrequencyTableSize = frequencyTableSize;

        do
        {
          // increase frequency table size by factor 2
          frequencyTableSize <<= 1;
        } while (inputSymbol + 1 > frequencyTableSize);

        if (cFreqTable_.size () < frequencyTableSize + 1)
        {
          // resize frequency vector
          cFreqTable_.resize (frequencyTableSize + 1);
        }

        // init new frequency range with zero
        memset (&cFreqTable_[oldfrequencyTableSize + 1], 0,
                sizeof(uint64_t) * (frequencyTableSize - oldfrequencyTableSize));
      }
      cFreqTable_[inputSymbol + 1]++;
    }
    frequencyTableSize++;

    // convert to cumulative frequency table
    for (f = 1; f < frequencyTableSize; f++)
    {
      cFreqTable_[f] = cFreqTable_[f - 1] + cFreqTable_[f];
      if (cFreqTable_[f] <= cFreqTable_[f - 1])
        cFreqTable_[f] = cFreqTable_[f - 1] + 1;
    }

    // rescale if numerical limits are reached
    while (cFreqTable_[frequencyTableSize - 1] >= maxRange)
    {
      for (f = 1; f < cFreqTable_.size (); f++)
      {
        cFreqTable_[f] /= 2;
        ;
        if (cFreqTable_[f] <= cFreqTable_[f - 1])
          cFreqTable_[f] = cFreqTable_[f - 1] + 1;
      }
    }

    // calculate amount of bytes per frequency table entry
    frequencyTableByteSize = (uint8_t)ceil (Log2 ((double) cFreqTable_[frequencyTableSize - 1]) / 8.0);

    // write size of frequency table to output stream
    outputByteStream_arg.write ((const char *)&frequencyTableSize, sizeof(frequencyTableSize));
    outputByteStream_arg.write ((const char *)&frequencyTableByteSize, sizeof(frequencyTableByteSize));

    streamByteCount += sizeof(frequencyTableSize)+sizeof(frequencyTableByteSize);

    // write cumulative  frequency table to output stream
    for (f = 1; f < frequencyTableSize; f++)
    {
      outputByteStream_arg.write ((const char *)&cFreqTable_[f], frequencyTableByteSize);
      streamByteCount += frequencyTableByteSize;
    }

    readPos = 0;
    low = 0;
    range = (uint64_t)-1;

    // start encoding
    while (readPos < input_size)
    {

      // read symol
      inputsymbol = inputIntVector_arg[readPos++];

      // map to range
      low += cFreqTable_[inputsymbol] * (range /= cFreqTable_[frequencyTableSize - 1]);
      range *= cFreqTable_[inputsymbol + 1] - cFreqTable_[inputsymbol];

      // check range limits
      while ((low ^ (low + range)) < top || ((range < bottom) && ((range = -low & (bottom - 1)), 1)))
      {
        out = low >> 56;
        range <<= 8;
        low <<= 8;
        outputCharVector_.push_back(out);
      }

    }

    // flush remaining data
    for (i = 0; i < 8; i++)
    {
      out = low >> 56;
      outputCharVector_.push_back(out);
      low <<= 8;
    }

    // write encoded data to stream
    outputByteStream_arg.write (&outputCharVector_[0], outputCharVector_.size());

    streamByteCount += outputCharVector_.size();

    return streamByteCount;

  }
Пример #12
0
  unsigned long
  AdaptiveRangeCoder::decodeStreamToCharVector (std::istream& inputByteStream_arg,
                                                std::vector<char>& outputByteVector_arg)
  {
    uint8_t ch;
    DWord freq[257];
    unsigned int i, j, f;

    // define limits
    const DWord top = (DWord)1 << 24;
    const DWord bottom = (DWord)1 << 16;
    const DWord maxRange = (DWord)1 << 16;

    DWord low, range;
    DWord code;

    unsigned int outputBufPos;
    unsigned int output_size = (unsigned) outputByteVector_arg.size ();

    unsigned long streamByteCount;

    streamByteCount = 0;

    outputBufPos = 0;

    code = 0;
    low = 0;
    range = (DWord)-1;

    // init decoding
    for (i = 0; i < 4; i++)
    {
      inputByteStream_arg.read ((char*)&ch, sizeof(char));
      streamByteCount += sizeof(char);
      code = (code << 8) | ch;
    }

    // init cumulative frequency table
    for (i = 0; i <= 256; i++)
      freq[i] = i;

    // decoding loop
    for (i = 0; i < output_size; i++)
    {
      uint8_t symbol = 0;
      uint8_t sSize = 256 / 2;

      // map code to range
      DWord count = (code - low) / (range /= freq[256]);

      // find corresponding symbol
      while (sSize > 0)
      {
        if (freq[symbol + sSize] <= count)
        {
          symbol += sSize;
        }
        sSize /= 2;
      }

      // output symbol
      outputByteVector_arg[outputBufPos++] = symbol;

      // update range limits
      low += freq[symbol] * range;
      range *= freq[symbol + 1] - freq[symbol];

      // decode range limits
      while ((low ^ (low + range)) < top || ((range < bottom) && ((range = -low & (bottom - 1)), 1)))
      {
        inputByteStream_arg.read ((char*)&ch, sizeof(char));
        streamByteCount += sizeof(char);
        code = code << 8 | ch;
        range <<= 8;
        low <<= 8;
      }

      // update cumulative frequency table
      for (j = symbol + 1; j < 257; j++)
        freq[j]++;

      // detect overflow
      if (freq[256] >= maxRange)
      {
        // rescale
        for (f = 1; f <= 256; f++)
        {
          freq[f] /= 2;
          if (freq[f] <= freq[f - 1])
            freq[f] = freq[f - 1] + 1;
        }
      }
    }

    return streamByteCount;

  }
Пример #13
0
		inline int nnz() const {
			return (int)data_.size();
		}
Пример #14
0
		inline int cols() const {
			return (int)cidx_.size() - 1;
		}
Пример #15
0
		void change_capacity(int nnz_new) {
			ridx_.resize(nnz_new, rows_);
			data_.resize(nnz_new, 0.0);
		}
Пример #16
0
//L3 Interface Initialization
static bool setup_one_l3_interface(sai_vlan_id_t vlanid,
                                   int port_count,
                                   const sai_object_id_t *port_list,
                                   const MacAddress mac,
                                   const IpAddress ipaddr,
                                   const IpAddress ipmask,
                                   sai_object_id_t &rif_id)
{

    LOGG(TEST_INFO, SETL3, "sai_vlan_api->create_vlan, create vlan %hu.\n", vlanid);
    sai_status_t status = sai_vlan_api->create_vlan(vlanid);

    if (status != SAI_STATUS_SUCCESS && status != SAI_STATUS_ITEM_ALREADY_EXISTS)
    {
        LOGG(TEST_ERR, SETL3, "fail to create vlan %hu. status=0x%x\n", vlanid, -status);
        return false;
    }

    std::vector<sai_attribute_t> member_attrs;
    sai_attribute_t member_attr;
    sai_object_id_t vlan_member_id;
    
    for (int i = 0; i < port_count; ++i)
    {
        member_attr.id = SAI_VLAN_MEMBER_ATTR_VLAN_ID;
        member_attr.value.u16 = vlanid;
        member_attrs.push_back(member_attr);
        
        member_attr.id = SAI_VLAN_MEMBER_ATTR_PORT_ID;
        member_attr.value.oid =  port_list[i];
        member_attrs.push_back(member_attr);

        member_attr.id = SAI_VLAN_MEMBER_ATTR_TAGGING_MODE;
        member_attr.value.s32 = SAI_VLAN_PORT_UNTAGGED;
        member_attrs.push_back(member_attr);

        LOGG(TEST_INFO, SETL3, "sai_vlan_api->create_vlan_member, with vlan %d.\n", vlanid);
        status = sai_vlan_api->create_vlan_member(&vlan_member_id, member_attrs.size(), member_attrs.data());
        if (status != SAI_STATUS_SUCCESS)
        {
            LOGG(TEST_ERR, SETL3, "fail to create member vlan %hu. status=0x%x\n",  vlanid, -status);
            return false;
        }
        vlan_member_list.push_back(vlan_member_id);
    }

    sai_attribute_t attr;
    attr.id = SAI_PORT_ATTR_PORT_VLAN_ID;
    attr.value.u16 = vlanid;

    for (int i = 0; i < port_count; ++i)
    {
        LOGG(TEST_INFO, SETL3, "sai_port_api->set_port_attribute SAI_PORT_ATTR_PORT_VLAN_ID %hu to port 0x%lx\n",
             vlanid,  port_list[i]);
        status = sai_port_api->set_port_attribute(port_list[i], &attr);

        if (status != SAI_STATUS_SUCCESS)
        {
            LOGG(TEST_ERR, SETL3, "fail to set port %lu untagged vlan %hu. status=0x%x\n", port_list[i], vlanid, -status);
            return false;
        }
    }

    // create router interface
    std::vector<sai_attribute_t> rif_attrs;
    sai_attribute_t rif_attr;

    rif_attr.id = SAI_ROUTER_INTERFACE_ATTR_VIRTUAL_ROUTER_ID;
    rif_attr.value.oid = g_vr_id;
    rif_attrs.push_back(rif_attr);

    rif_attr.id = SAI_ROUTER_INTERFACE_ATTR_TYPE;
    rif_attr.value.s32 = SAI_ROUTER_INTERFACE_TYPE_VLAN;
    rif_attrs.push_back(rif_attr);

    rif_attr.id = SAI_ROUTER_INTERFACE_ATTR_SRC_MAC_ADDRESS;
    memcpy(rif_attr.value.mac, mac.to_bytes(), sizeof(sai_mac_t));
    rif_attrs.push_back(rif_attr);

    rif_attr.id = SAI_ROUTER_INTERFACE_ATTR_VLAN_ID;
    rif_attr.value.u16 = vlanid;
    rif_attrs.push_back(rif_attr);

    LOGG(TEST_INFO, SETL3, "sai_rif_api->create_router_interface\n");
    status = sai_rif_api->create_router_interface(&rif_id, rif_attrs.size(), rif_attrs.data());

    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to create router interface. status=0x%x\n", -status);
        return false;
    }

    if (!SAI_OID_TYPE_CHECK(rif_id, SAI_OBJECT_TYPE_ROUTER_INTERFACE))
    {
        LOGG(TEST_ERR, SETL3, "router interface oid generated is not the right type\n");
        return false;
    }

    LOGG(TEST_DEBUG, SETL3, "router_interface created, rif_id 0x%lx\n", rif_id);

    // add interface ip to l3 host table
    LOGG(TEST_INFO, SETL3, "sai_route_api->create_route, SAI_ROUTE_ATTR_PACKET_ACTION, SAI_PACKET_ACTION_TRAP\n");
    sai_unicast_route_entry_t unicast_route_entry;
    unicast_route_entry.vr_id = g_vr_id;
    unicast_route_entry.destination.addr_family = SAI_IP_ADDR_FAMILY_IPV4;
    unicast_route_entry.destination.addr.ip4 = ipaddr.addr();
    unicast_route_entry.destination.mask.ip4 = 0xffffffff;
    sai_attribute_t route_attr;
    route_attr.id = SAI_ROUTE_ATTR_PACKET_ACTION;
    route_attr.value.s32 = SAI_PACKET_ACTION_TRAP;
    status = sai_route_api->create_route(&unicast_route_entry, 1, &route_attr);

    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to add route for l3 interface to cpu. status=0x%x\n", -status);
        return false;
    }

    // by default, drop all the traffic destined to the the ip subnet.
    // if we learn some of the neighbors, add them explicitly to the l3 host table.
    LOGG(TEST_INFO, SETL3, "sai_route_api->create_route, SAI_ROUTE_ATTR_PACKET_ACTION, SAI_PACKET_ACTION_DROP\n");
    unicast_route_entry.vr_id = g_vr_id;
    unicast_route_entry.destination.addr_family = SAI_IP_ADDR_FAMILY_IPV4;
    unicast_route_entry.destination.addr.ip4 = ipaddr.addr() & ipmask.addr();
    unicast_route_entry.destination.mask.ip4 = ipmask.addr();
    route_attr.id = SAI_ROUTE_ATTR_PACKET_ACTION;
    route_attr.value.s32 = SAI_PACKET_ACTION_DROP;
    status = sai_route_api->create_route(&unicast_route_entry, 1, &route_attr);

    if (status != SAI_STATUS_SUCCESS)
    {
        LOGG(TEST_ERR, SETL3, "fail to add l3 intf subnet to blackhole. status=0x%x", -status);
        return false;
    }

    return true;
}
Пример #17
0
  unsigned long
  StaticRangeCoder::decodeStreamToCharVector (std::istream& inputByteStream_arg,
                                              std::vector<char>& outputByteVector_arg)
  {
    uint8_t ch;
    DWord freq[257];
    unsigned int i;

    // define range limits
    const DWord top = (DWord)1 << 24;
    const DWord bottom = (DWord)1 << 16;

    DWord low, range;
    DWord code;

    unsigned int outputBufPos;
    unsigned int output_size;

    unsigned long streamByteCount;

    streamByteCount = 0;

    output_size = outputByteVector_arg.size ();

    outputBufPos = 0;

    // read cumulative frequency table
    inputByteStream_arg.read ((char*)&freq[0], sizeof(freq));
    streamByteCount += sizeof(freq);

    code = 0;
    low = 0;
    range = (DWord)-1;

    // init code
    for (i = 0; i < 4; i++)
    {
      inputByteStream_arg.read ((char*)&ch, sizeof(char));
      streamByteCount += sizeof(char);
      code = (code << 8) | ch;
    }

    // decoding
    for (i = 0; i < output_size; i++)
    {
      // symbol lookup in cumulative frequency table
      uint8_t symbol = 0;
      uint8_t sSize = 256 / 2;

      DWord count = (code - low) / (range /= freq[256]);

      while (sSize > 0)
      {
        if (freq[symbol + sSize] <= count)
        {
          symbol += sSize;
        }
        sSize /= 2;
      }

      // write symbol to output stream
      outputByteVector_arg[outputBufPos++] = symbol;

      low += freq[symbol] * range;
      range *= freq[symbol + 1] - freq[symbol];

      // check range limits
      while ((low ^ (low + range)) < top || ((range < bottom) && ((range = -low & (bottom - 1)), 1)))
      {
        inputByteStream_arg.read ((char*)&ch, sizeof(char));
        streamByteCount += sizeof(char);
        code = code << 8 | ch;
        range <<= 8;
        low <<= 8;
      }

    }

    return streamByteCount;

  }
Пример #18
0
bool loadOBJ(const char* path, std::vector<glm::vec3> &out_vertices, std::vector<glm::vec2> &out_uvs, std::vector<glm::vec3> &out_normals)
{
	std::vector<unsigned int> vertex_indices;
	std::vector<unsigned int> uv_indices;
	std::vector<unsigned int> normal_indices;
	
	std::vector<glm::vec3> temp_vertices;
	std::vector<glm::vec2> temp_uvs;
	std::vector<glm::vec3> temp_normals;
	
	// Opens file
	FILE* file = fopen(path, "r");
	if (file == NULL)
	{
		std::cout << "Couldn't open " << path << std::endl;
		return false;
	}
	
	// Reads file and changes it's shape
	while(true)
	{
		// Reads until End Of File
		char line_header[128];
		int line = fscanf(file, "%s", line_header);
		if (line == EOF)
			break;
		
		if (strcmp(line_header, "v") == 0)
		{
			glm::vec3 vertex;
			fscanf(file, "%f %f %f\n", &vertex.x, &vertex.y, &vertex.z);
			temp_vertices.push_back(vertex);
		} else if (strcmp(line_header, "vt") == 0)
		{
			glm::vec2 uv;
			fscanf(file, "%f %f", &uv.x, &uv.y);
			temp_uvs.push_back(uv);
		} else if (strcmp(line_header, "vn") == 0)
		{
			glm::vec3 normal;
			fscanf(file, "%f %f %f\n", &normal.x, &normal.y, &normal.z);
			temp_normals.push_back(normal);
		} else if (strcmp(line_header, "f") == 0)
		{
			std::string vertex1, vertex2, vertex3;
			unsigned int vertex_index[3], uv_index[3], normal_index[3];
			int matches = fscanf(file, "%d/%d/%d %d/%d/%d %d/%d/%d\n", &vertex_index[0], &uv_index[0], &normal_index[0], &vertex_index[1], &uv_index[1], &normal_index[1], &vertex_index[2], &uv_index[2], &normal_index[2]);
			if (matches != 9)
			{
				std::cout << "File wasn't standard" << std::endl;
				return false;
			}
			vertex_indices.push_back(vertex_index[0]);
			vertex_indices.push_back(vertex_index[1]);
			vertex_indices.push_back(vertex_index[2]);
			uv_indices.push_back(uv_index[0]);
			uv_indices.push_back(uv_index[1]);
			uv_indices.push_back(uv_index[2]);
			normal_indices.push_back(normal_index[0]);
			normal_indices.push_back(normal_index[1]);
			normal_indices.push_back(normal_index[2]);
		}
	}
	
	for(unsigned int i = 0; i < vertex_indices.size(); i++)
	{
		unsigned int vertex_index = vertex_indices[i];
		glm::vec3 vertex = temp_vertices[vertex_index - 1];
		out_vertices.push_back(vertex);
		
		unsigned int uv_index = uv_indices[i];
		glm::vec2 uv = temp_uvs[uv_index - 1];
		out_uvs.push_back(uv);
		
		unsigned int normal_index = normal_indices[i];
		glm::vec3 normal = temp_normals[normal_index - 1];
		out_normals.push_back(normal);
	}
	
	return true;	
}
Пример #19
0
//cached call
bool DCDTrajectoryWriter::write(const std::vector<Vector3DBlock> &cachedCoords) {
  
  //push out if sufficient
  if( cachedCoords.size() > 0 ){
    report << debug(1) <<"Writing DCD, multiple frames." << endr;
    
    //original code modified for caching, index 0 must exist here
    const unsigned int setcount = cachedCoords.size();
    const unsigned int count = cachedCoords[0].size();//ccoords.size();
    if (!reopen(count, setcount)) return false;
    
    //loop over each set of coordinates
    for( int i=0; i<setcount; i++){
      Vector3DBlock ccoords = cachedCoords[i];
      
      //original code
      //const unsigned int count = ccoords.size();
      //if (!reopen(count)) return false;
      
      myX.resize(count);
      myY.resize(count);
      myZ.resize(count);
      
      for (unsigned int i = 0; i < count; ++i) {
        myX[i] = static_cast<float>(ccoords[i].c[0]);
        myY[i] = static_cast<float>(ccoords[i].c[1]);
        myZ[i] = static_cast<float>(ccoords[i].c[2]);
        if (myIsLittleEndian != ISLITTLEENDIAN) {
          swapBytes(myX[i]);
          swapBytes(myY[i]);
          swapBytes(myZ[i]);
        }
      }
      
      int32 nAtoms = static_cast<int32>(count * 4);
      if (myIsLittleEndian != ISLITTLEENDIAN) swapBytes(nAtoms);
      
      file.write((char *)&nAtoms, sizeof(int32));
      file.write((char *)&(myX[0]), count * sizeof(float4));
      file.write((char *)&nAtoms, sizeof(int32));
      
      file.write((char *)&nAtoms, sizeof(int32));
      file.write((char *)&(myY[0]), count * sizeof(float4));
      file.write((char *)&nAtoms, sizeof(int32));
      
      file.write((char *)&nAtoms, sizeof(int32));
      file.write((char *)&(myZ[0]), count * sizeof(float4));
      file.write((char *)&nAtoms, sizeof(int32));
      
      //close();
      
      if( file.fail() ){
        close();
        return false;
      }//end of coordinate save
      
    }//end of loop
    
    //close file once strored
    close();
    return true;//!file.fail();
  }
}
Пример #20
0
/**
 * A canonical signature exists of: <30> <total len> <02> <len R> <R> <02> <len S> <S> <hashtype>
 * Where R and S are not negative (their first byte has its highest bit not set), and not
 * excessively padded (do not start with a 0 byte, unless an otherwise negative number follows,
 * in which case a single 0 byte is necessary and even required).
 * 
 * See https://cryptomailcointalk.org/index.php?topic=8392.msg127623#msg127623
 *
 * This function is consensus-critical since BIP66.
 */
bool static IsValidSignatureEncoding(const std::vector<unsigned char> &sig) {
    // Format: 0x30 [total-length] 0x02 [R-length] [R] 0x02 [S-length] [S] [sighash]
    // * total-length: 1-byte length descriptor of everything that follows,
    //   excluding the sighash byte.
    // * R-length: 1-byte length descriptor of the R value that follows.
    // * R: arbitrary-length big-endian encoded R value. It must use the shortest
    //   possible encoding for a positive integers (which means no null bytes at
    //   the start, except a single one when the next byte has its highest bit set).
    // * S-length: 1-byte length descriptor of the S value that follows.
    // * S: arbitrary-length big-endian encoded S value. The same rules apply.
    // * sighash: 1-byte value indicating what data is hashed (not part of the DER
    //   signature)

    // Minimum and maximum size constraints.
    if (sig.size() < 9) return false;
    if (sig.size() > 73) return false;

    // A signature is of type 0x30 (compound).
    if (sig[0] != 0x30) return false;

    // Make sure the length covers the entire signature.
    if (sig[1] != sig.size() - 3) return false;

    // Extract the length of the R element.
    unsigned int lenR = sig[3];

    // Make sure the length of the S element is still inside the signature.
    if (5 + lenR >= sig.size()) return false;

    // Extract the length of the S element.
    unsigned int lenS = sig[5 + lenR];

    // Verify that the length of the signature matches the sum of the length
    // of the elements.
    if ((size_t)(lenR + lenS + 7) != sig.size()) return false;
 
    // Check whether the R element is an integer.
    if (sig[2] != 0x02) return false;

    // Zero-length integers are not allowed for R.
    if (lenR == 0) return false;

    // Negative numbers are not allowed for R.
    if (sig[4] & 0x80) return false;

    // Null bytes at the start of R are not allowed, unless R would
    // otherwise be interpreted as a negative number.
    if (lenR > 1 && (sig[4] == 0x00) && !(sig[5] & 0x80)) return false;

    // Check whether the S element is an integer.
    if (sig[lenR + 4] != 0x02) return false;

    // Zero-length integers are not allowed for S.
    if (lenS == 0) return false;

    // Negative numbers are not allowed for S.
    if (sig[lenR + 6] & 0x80) return false;

    // Null bytes at the start of S are not allowed, unless S would otherwise be
    // interpreted as a negative number.
    if (lenS > 1 && (sig[lenR + 6] == 0x00) && !(sig[lenR + 7] & 0x80)) return false;

    return true;
}
Пример #21
0
int FuzzerDriver(const std::vector<std::string> &Args,
                 UserSuppliedFuzzer &USF) {
  using namespace fuzzer;
  assert(!Args.empty());
  ProgName = new std::string(Args[0]);
  ParseFlags(Args);
  if (Flags.help) {
    PrintHelp();
    return 0;
  }

  if (Flags.jobs > 0 && Flags.workers == 0) {
    Flags.workers = std::min(NumberOfCpuCores() / 2, Flags.jobs);
    if (Flags.workers > 1)
      Printf("Running %d workers\n", Flags.workers);
  }

  if (Flags.workers > 0 && Flags.jobs > 0)
    return RunInMultipleProcesses(Args, Flags.workers, Flags.jobs);

  Fuzzer::FuzzingOptions Options;
  Options.Verbosity = Flags.verbosity;
  Options.MaxLen = Flags.max_len;
  Options.UnitTimeoutSec = Flags.timeout;
  Options.MaxTotalTimeSec = Flags.max_total_time;
  Options.DoCrossOver = Flags.cross_over;
  Options.MutateDepth = Flags.mutate_depth;
  Options.ExitOnFirst = Flags.exit_on_first;
  Options.UseCounters = Flags.use_counters;
  Options.UseIndirCalls = Flags.use_indir_calls;
  Options.UseTraces = Flags.use_traces;
  Options.ShuffleAtStartUp = Flags.shuffle;
  Options.PreferSmallDuringInitialShuffle =
      Flags.prefer_small_during_initial_shuffle;
  Options.Reload = Flags.reload;
  Options.OnlyASCII = Flags.only_ascii;
  Options.TBMDepth = Flags.tbm_depth;
  Options.TBMWidth = Flags.tbm_width;
  if (Flags.runs >= 0)
    Options.MaxNumberOfRuns = Flags.runs;
  if (!Inputs->empty())
    Options.OutputCorpus = (*Inputs)[0];
  if (Flags.sync_command)
    Options.SyncCommand = Flags.sync_command;
  Options.SyncTimeout = Flags.sync_timeout;
  Options.ReportSlowUnits = Flags.report_slow_units;
  if (Flags.artifact_prefix)
    Options.ArtifactPrefix = Flags.artifact_prefix;
  if (Flags.dict)
    if (!ParseDictionaryFile(FileToString(Flags.dict), &Options.Dictionary))
      return 1;
  if (Flags.verbosity > 0 && !Options.Dictionary.empty())
    Printf("Dictionary: %zd entries\n", Options.Dictionary.size());
  Options.SaveArtifacts = !Flags.test_single_input;

  Fuzzer F(USF, Options);

  // Timer
  if (Flags.timeout > 0)
    SetTimer(Flags.timeout / 2 + 1);

  if (Flags.test_single_input)
    return RunOneTest(&F, Flags.test_single_input);

  if (Flags.merge) {
    F.Merge(*Inputs);
    exit(0);
  }

  unsigned Seed = Flags.seed;
  // Initialize Seed.
  if (Seed == 0)
    Seed = time(0) * 10000 + getpid();
  if (Flags.verbosity)
    Printf("Seed: %u\n", Seed);
  USF.GetRand().ResetSeed(Seed);

  F.RereadOutputCorpus();
  for (auto &inp : *Inputs)
    if (inp != Options.OutputCorpus)
      F.ReadDir(inp, nullptr);

  if (F.CorpusSize() == 0)
    F.AddToCorpus(Unit());  // Can't fuzz empty corpus, so add an empty input.
  F.ShuffleAndMinimize();
  if (Flags.save_minimized_corpus)
    F.SaveCorpus();
  F.Loop();
  if (Flags.verbosity)
    Printf("Done %d runs in %zd second(s)\n", F.getTotalNumberOfRuns(),
           F.secondsSinceProcessStartUp());

  exit(0);  // Don't let F destroy itself.
}
Пример #22
0
template <typename PointT, typename FlannDistance> void
pcl::search::FlannSearch<PointT, FlannDistance>::radiusSearch (
    const PointCloud& cloud, const std::vector<int>& indices, double radius, std::vector< std::vector<int> >& k_indices,
    std::vector< std::vector<float> >& k_sqr_distances, unsigned int max_nn) const
{
  if (indices.empty ()) // full point cloud + trivial copy operation = no need to do any conversion/copying to the flann matrix!
  {
    k_indices.resize (cloud.size ());
    k_sqr_distances.resize (cloud.size ());

    if (! cloud.is_dense) // remove this check as soon as FLANN does NaN checks internally
    {
      for (size_t i = 0; i < cloud.size(); i++)
      {
        assert (point_representation_->isValid (cloud[i]) && "Invalid (NaN, Inf) point coordinates given to radiusSearch!");
      }
    }

    bool can_cast = point_representation_->isTrivial ();

    float* data = 0;
    if (!can_cast)
    {
      data = new float[dim_*cloud.size ()];
      for (size_t i = 0; i < cloud.size (); ++i)
      {
        float* out = data+i*dim_;
        point_representation_->vectorize (cloud[i],out);
      }
    }

    float* cdata = can_cast ? const_cast<float*> (reinterpret_cast<const float*> (&cloud[0])) : data;
    const flann::Matrix<float> m (cdata ,cloud.size (), dim_, can_cast ? sizeof (PointT) : dim_ * sizeof (float));

    flann::SearchParams p;
    p.sorted = sorted_results_;
    p.eps = eps_;
    p.checks = checks_;
    // here: max_nn==0: take all neighbors. flann: max_nn==0: return no neighbors, only count them. max_nn==-1: return all neighbors
    p.max_neighbors = max_nn != 0 ? max_nn : -1;
    index_->radiusSearch (m,k_indices,k_sqr_distances,static_cast<float> (radius * radius), p);

    delete [] data;
  }
  else // if indices are present, the cloud has to be copied anyway. Only copy the relevant parts of the points here.
  {
    k_indices.resize (indices.size ());
    k_sqr_distances.resize (indices.size ());

    if (! cloud.is_dense)  // remove this check as soon as FLANN does NaN checks internally
    {
      for (size_t i = 0; i < indices.size(); i++)
      {
        assert (point_representation_->isValid (cloud [indices[i]]) && "Invalid (NaN, Inf) point coordinates given to radiusSearch!");
      }
    }

    float* data = new float [dim_ * indices.size ()];
    for (size_t i = 0; i < indices.size (); ++i)
    {
      float* out = data+i*dim_;
      point_representation_->vectorize (cloud[indices[i]], out);
    }
    const flann::Matrix<float> m (data, cloud.size (), point_representation_->getNumberOfDimensions ());

    flann::SearchParams p;
    p.sorted = sorted_results_;
    p.eps = eps_;
    p.checks = checks_;
    // here: max_nn==0: take all neighbors. flann: max_nn==0: return no neighbors, only count them. max_nn==-1: return all neighbors
    p.max_neighbors = max_nn != 0 ? max_nn : -1;
    index_->radiusSearch (m, k_indices, k_sqr_distances, static_cast<float> (radius * radius), p);

    delete[] data;
  }
  if (!identity_mapping_)
  {
    for (size_t j = 0; j < k_indices.size (); ++j )
    {
      for (size_t i = 0; i < k_indices[j].size (); ++i)
      {
        int& neighbor_index = k_indices[j][i];
        neighbor_index = index_mapping_[neighbor_index];
      }
    }
  }
}
Пример #23
0
/// Perform tracking
std::vector<cv::DMatch> MatcherOpenCV::performTracking(cv::Mat prevImg,
		cv::Mat img, std::vector<cv::Point2f> &prevFeatures,
		std::vector<cv::Point2f> &features,
		std::vector<cv::KeyPoint>& prevKeyPoints,
		std::vector<cv::KeyPoint>& keyPoints,
        std::vector<double>& prevDetDists,
        std::vector<double>& detDists) {

	// Some needed variables
	std::vector<uchar> status;
	std::vector<float> err;
	cv::TermCriteria termcrit(CV_TERMCRIT_ITER | CV_TERMCRIT_EPS,
			matcherParameters.OpenCVParams.maxIter,
			matcherParameters.OpenCVParams.eps);

	// Setting OpenCV flags based on our parameters
	int trackingFlags = 0;
	if (matcherParameters.OpenCVParams.useInitialFlow > 0)
		trackingFlags = cv::OPTFLOW_USE_INITIAL_FLOW;
	if (matcherParameters.OpenCVParams.trackingErrorType > 0)
			trackingFlags |= cv::OPTFLOW_LK_GET_MIN_EIGENVALS;

	// Calculating the movement of features
	cv::calcOpticalFlowPyrLK(prevImg, img, prevFeatures, features, status,
					err,
					cv::Size(matcherParameters.OpenCVParams.winSize,
							matcherParameters.OpenCVParams.winSize),
					matcherParameters.OpenCVParams.maxLevels, termcrit,
					trackingFlags,
					matcherParameters.OpenCVParams.trackingMinEigThreshold);

	keyPoints = prevKeyPoints;
	//copy new positions to keyPoints
	for(std::vector<cv::Point2f>::size_type i = 0; i < features.size(); ++i){
		keyPoints[i].pt = features[i];
	}
	detDists = prevDetDists;

	// This parts removes additional features for which we observed an error above preset threshold
	int errSize = (int)err.size();
	for (int i = 0; i < errSize; i++) {
		if (err[i] > matcherParameters.OpenCVParams.trackingErrorThreshold)
			status[i] = 0;
	}

	// Removing features if they are too close to each other - the feature to remove is based on an error from tracking
	std::set<int> featuresToRemove;
	for (std::vector<cv::Point2f>::size_type i = 0; i < features.size(); i++) {
		for (std::vector<cv::Point2f>::size_type j = i + 1; j < features.size(); j++) {
			if (cv::norm(features[i] - features[j]) < matcherParameters.OpenCVParams.minimalReprojDistanceNewTrackingFeatures) {
				if ( err[i] > err[j])
					featuresToRemove.insert((int)i);
				else
					featuresToRemove.insert((int)j);
			}
		}
	}

	// Returning result in matching-compatible format
	int i = 0, j = 0;
	std::vector<cv::DMatch> matches;
	std::vector<cv::Point2f>::iterator itFeatures = features.begin();
	std::vector<cv::KeyPoint>::iterator itKeyPoints = keyPoints.begin();
    std::vector<double>::iterator itDetDists = detDists.begin();
	std::vector<uchar>::iterator it = status.begin();
	for (; it != status.end(); ++it, i++) {

		// Tracking succeed and the feature is not too close to feature with more precise tracking
		if (*it != 0  && featuresToRemove.find(i) == featuresToRemove.end()) {
			matches.push_back(cv::DMatch(i, j, 0));
			j++;
			++itFeatures;
			++itKeyPoints;
			++itDetDists;
		}
		// Tracking failed -- we remove those features
		else {
			itFeatures = features.erase(itFeatures);
			itKeyPoints = keyPoints.erase(itKeyPoints);
			itDetDists = detDists.erase(itDetDists);
		}
	}

	if (matcherParameters.verbose > 0)
		std::cout << "MatcherOpenCV::performTracking -- features tracked "
				<< matches.size() << " ("
				<< (float)matches.size() * 100.0 / (float)prevFeatures.size() << "%)"
				<< std::endl;

	// Return result
	return matches;
}
Пример #24
0
/* Export a graph (triangle navmesh graph) to a file
 * Requires:
 * 	@nodes		The list of all the nodes
 * 	@fname		the filename to export the graph
 */
bool TriNavMeshBuilder::exportGraph(const std::vector<GNode *> &nodes,
		const std::vector<GEdge *> &edges,
		const Ogre::String &fname)
{
	std::ofstream out;

	out.open(fname.c_str());
	if(!out.is_open()){
		debug("Error trying to open the file %s\n", fname.c_str());
		return false;
	}

	// get all the vertexs
	std::map<const sm::Vertex *, int> vertexs;
	int vertexCount = 0;
	std::vector<const sm::Vertex *> vertexList;
	for(int i = nodes.size()-1; i >= 0; --i){
		ASSERT(nodes[i]->getTriangle());
		const sm::Vertex *v1 = nodes[i]->getTriangle()->v1;
		const sm::Vertex *v2 = nodes[i]->getTriangle()->v2;
		const sm::Vertex *v3 = nodes[i]->getTriangle()->v3;
		if(vertexs.find(v1) == vertexs.end())
		{vertexs[v1] = vertexCount++; vertexList.push_back(v1);}

		if(vertexs.find(v2) == vertexs.end())
		{vertexs[v2] = vertexCount++; vertexList.push_back(v2);}

		if(vertexs.find(v3) == vertexs.end())
		{vertexs[v3] = vertexCount++; vertexList.push_back(v3);}
	}

	ASSERT(vertexCount == vertexList.size());

	// save the number of vertexs and save the vertexs
	out << vertexCount << "\n";
	for(int i = 0; i < vertexCount; ++i){
		out << vertexList[i]->x << "\t" << vertexList[i]->y << "\n";
	}

	// save the number of nodes and the nodes and the nodeMap
	std::map<const GNode *, int> nodesMap;
	int nodesCount = 0;
	out << nodes.size() << "\n";
	for(int i = 0; i < nodes.size(); ++i){
		if(nodesMap.find(nodes[i]) == nodesMap.end()){nodesMap[nodes[i]] = nodesCount++;}
		const Triangle *t = nodes[i]->getTriangle();
		ASSERT(t);
		// we will save the vertexs index of the triangle of the node
		out << vertexs[t->v1] << "\t" << vertexs[t->v2] << "\t" <<
				vertexs[t->v3] << "\n";
	}

	// save the number of edges and the edges
	out << edges.size() << "\n";
	for(int i = 0; i < edges.size(); ++i){
		const GNode *n1 = edges[i]->getNode1();
		const GNode *n2 = edges[i]->getNode2();
		ASSERT(n1 && n2);

		// we will save the nodes index and the distance
		out << nodesMap[n1] << "\t" << nodesMap[n2] << "\t" <<
				edges[i]->getWeight() << "\n";
	}

	out.close();

	return true;
}
Пример #25
0
void Recombiner::recombine(const stdr_msgs::LadybugImages & raw_images,
                           std::vector<sensor_msgs::Image::Ptr> & bayer_images)
{
  ROS_ASSERT( raw_images.images.size() == 24 );
  bayer_images.resize(6);

#if !SAVE_INTERMEDIATE_IMAGES
#pragma omp parallel for
#else
  std::cout <<"timestamp: " <<std::setprecision(std::numeric_limits<double>::digits10) <<raw_images.header.stamp.toSec() <<std::endl;
  std::cout <<"Saving frame " <<frame_count_ <<std::endl;
#endif
  for( unsigned cam=0; cam<6; ++cam )
  {
    const unsigned c4 = cam * 4;
    if( !selector_[cam] )
      continue;


    const bool valid_camera_img = decompress4(raw_images, c4);


    // Prepare the output
    // Make sure the image is properly defined and allocated
    if( !valid_camera_img ) {
      bayer_images[cam].reset();
      continue;
    }

    if( ! bayer_images[cam] )
      bayer_images[cam].reset( new sensor_msgs::Image );

    sensor_msgs::Image & img = *(bayer_images[cam]);
    img.header = raw_images.header;
    std::stringstream ss;
    ss << "/ladybug/camera" <<cam;
    img.header.frame_id = ss.str();

    img.height = FULL_HEIGHT;
    img.width = FULL_WIDTH;
    img.is_bigendian = false;
    if( debayer_ ) {
      img.encoding = sensor_msgs::image_encodings::RGB8;
      img.step = img.width * 3;
    }
    else {
      img.encoding = sensor_msgs::image_encodings::BAYER_GRBG8;
      img.step = img.width;
    }
    img.data.resize(img.height * img.step);

    // select the output of the recombining stage
    std::vector<unsigned char> & data = debayer_ ? combined_images_[cam] : img.data;


    combine(c4, &(data[0]));


    if( debayer_ ) {
      // TODO: implement debayering with dc1394
      dc1394_bayer_decoding_8bit( &(combined_images_[cam][0]), &(img.data[0]),
                                  FULL_WIDTH, FULL_HEIGHT,
                                  DC1394_COLOR_FILTER_GRBG,
                                  debayer_alg_);

#if SAVE_INTERMEDIATE_IMAGES
      //save debayered image
      cv::Mat mrgb(FULL_HEIGHT, FULL_WIDTH, CV_8UC3, &(img.data[0]));
      cv::Mat mbgr(FULL_HEIGHT, FULL_WIDTH, CV_8UC3);
      cv::cvtColor(mrgb, mbgr, CV_RGB2BGR);
      const std::string name = (boost::format("frame%04d_final_%02d.bmp") % frame_count_ % (c4/4)).str();
      cv::imwrite(name, mbgr);
      cv::imshow("frame", mbgr);
      cv::waitKey();
#endif
    }
  }

  ++frame_count_;
}
Пример #26
0
TUint DeviceList::Count() const
{
    return (TUint)iList.size();
}
/**
 * Function TransformRoundedEndsSegmentToPolygon
 * convert a segment with rounded ends to a polygon
 * Convert arcs to multiple straight lines
 * @param aCornerBuffer = a buffer to store the polygon
 * @param aStart = the segment start point coordinate
 * @param aEnd = the segment end point coordinate
 * @param aCircleToSegmentsCount = the number of segments to approximate a circle
 * @param aWidth = the segment width
 * Note: the polygon is inside the arc ends, so if you want to have the polygon
 * outside the circle, you should give aStart and aEnd calculated with a correction factor
 */
void TransformRoundedEndsSegmentToPolygon( std::vector <CPolyPt>& aCornerBuffer,
                                           wxPoint aStart, wxPoint aEnd,
                                           int aCircleToSegmentsCount,
                                           int aWidth )
{
    int     radius = aWidth / 2;
    wxPoint endp   = aEnd - aStart; // end point coordinate for the same segment starting at (0,0)
    wxPoint startp = aStart;
    wxPoint corner;
    int     seg_len;
    CPolyPt polypoint;

    // normalize the position in order to have endp.x >= 0;
    if( endp.x < 0 )
    {
        endp   = aStart - aEnd;
        startp = aEnd;
    }

    int delta_angle = ArcTangente( endp.y, endp.x );    // delta_angle is in 0.1 degrees
    seg_len = (int) sqrt( ( (double) endp.y * endp.y ) + ( (double) endp.x * endp.x ) );

    int delta = 3600 / aCircleToSegmentsCount; // rot angle in 0.1 degree

    // Compute the outlines of the segment, and creates a polygon
    // add right rounded end:
    for( int ii = 0; ii < 1800; ii += delta )
    {
        corner = wxPoint( 0, radius );
        RotatePoint( &corner, ii );
        corner.x += seg_len;
        RotatePoint( &corner, -delta_angle );
        corner += startp;
        polypoint.x = corner.x;
        polypoint.y = corner.y;
        aCornerBuffer.push_back( polypoint );
    }

    // Finish arc:
    corner = wxPoint( seg_len, -radius );
    RotatePoint( &corner, -delta_angle );
    corner += startp;
    polypoint.x = corner.x;
    polypoint.y = corner.y;
    aCornerBuffer.push_back( polypoint );

    // add left rounded end:
    for( int ii = 0; ii < 1800; ii += delta )
    {
        corner = wxPoint( 0, -radius );
        RotatePoint( &corner, ii );
        RotatePoint( &corner, -delta_angle );
        corner += startp;
        polypoint.x = corner.x;
        polypoint.y = corner.y;
        aCornerBuffer.push_back( polypoint );
    }

    // Finish arc:
    corner = wxPoint( 0, radius );
    RotatePoint( &corner, -delta_angle );
    corner += startp;
    polypoint.x = corner.x;
    polypoint.y = corner.y;
    aCornerBuffer.push_back( polypoint );

    aCornerBuffer.back().end_contour = true;
}
Пример #28
0
bool calc::trace_by_hsv_to_rgb(
	const double h, const double s, const double v
	,const std::vector<calc::trace_by_hsv_params>& hsv_params
	, double& r, double& g, double& b
)
{
	/* 高速化のための初期計算と、中間値の保持と、黒/色判断関数 */
 class check_black_and_color {
 public:
	check_black_and_color(const double s ,const double v)
		:one_minus_v_(1.-v) ,s_mul_v_(s*v)
	{}
	inline bool is_black_side(
		const double slope_line_len ,const double intercept
	) {
		if (this->s_mul_v_ == 0.) {/* 色味か明度がゼロなら黒部分 */
			return true;
		}
		if ( slope_line_len == 0.) { /* 0なら全て色部分 */
			return false;
		}
		if ( ((1. - slope_line_len) * this->s_mul_v_) <
		(this->one_minus_v_ - intercept) * slope_line_len) {
			return true;	/* 斜め切断して黒味側 */
		}
			return false; /* 上以外は色側 */
	}
 private:
	double one_minus_v_ ,s_mul_v_;
 }	chk_b_and_c(s,v);

	/* トレス(2値化)処理 */
	for (unsigned ii = 0; ii < hsv_params.size(); ++ii) {
		const trace_by_hsv_params& area = hsv_params.at(ii);

		/* 有効でない範囲は無視して他の範囲を探す */
		if (area.enable_sw == false) { continue; }

		/* 黒線 */
		if (area.hue_min < 0. || area.hue_max < 0.) {
			/* 太さ外のときは次ループへ */
			if (area.thickness < v) { continue; }

			/* 色味範囲のときは次ループへ */
			if ((0. < v) && (0. < s)
			&& (chk_b_and_c.is_black_side(
				area.slope_line_len ,area.intercept
			) == false)) {
				continue;
			}
			/* vがゼロあるいは、sがゼロのときは黒線 */
		}

		/* 色線 */
		else {
			/* 色相の範囲外の時は次ループへ */
			if (area.hue_min < area.hue_max) {
				if ((h < area.hue_min)
				||  (area.hue_max < h)) { continue; }
			} else
			if (area.hue_max < area.hue_min) {
				if ((area.hue_max < h)
				&&  (h < area.hue_min)) { continue; }
			} else
			if (area.hue_min == area.hue_max) {
				if (area.rotate360_sw==false) {
					if (area.hue_min != h) {
				/* 0回転でmin/max位置になければ範囲外 */
						continue;
					}
				}
				/* 1回転なら全て範囲内 */
			}

			/* 太さ外のときは次ループへ */
			if (area.thickness < (1. - s)) { continue; }

			/* 黒である(色味がない)ので次ループへ */
			if (v <= 0.) { continue; }

			/* 色味がないので次ループへ */
			if (s <= 0.) { continue; }

			/* 黒味範囲のときは次ループへ */
			if (chk_b_and_c.is_black_side(
				area.slope_line_len ,area.intercept
			)) {
				continue;
			}
		}

		/* 指定範囲の色で、トレススイッチONなら、
		トレス(指定の色に)して、抜ける
		範囲が重複していたらループで先の指定を優先する */
		r = area.target_r;
		g = area.target_g;
		b = area.target_b;
		return true;
	}

	/* 有効な範囲がなく2値化をしないなら
	白色(紙の地の色)(RGB=(1,1,1))にする */
	r = 1.;
	g = 1.;
	b = 1.;

	return false;
}
Пример #29
0
		std::vector<double>::const_iterator data_end()   const { return data_.end(); }
Пример #30
-16
inline void save(
    Archive & ar,
    const STD::vector<bool, Allocator> &t,
    const unsigned int /* file_version */
){
    // record number of elements
    unsigned int count = t.size();
    ar << BOOST_SERIALIZATION_NVP(count);
    STD::vector<bool>::const_iterator it = t.begin();
    while(count-- > 0){
        bool tb = *it++;
        ar << boost::serialization::make_nvp("item", tb);
    }
}