void PNS_KICAD_IFACE::AddItem( PNS::ITEM* aItem )
{
BOARD_CONNECTED_ITEM* newBI = NULL;
switch( aItem->Kind() )
{
case PNS::ITEM::SEGMENT_T:
{
PNS::SEGMENT* seg = static_cast<PNS::SEGMENT*>( aItem );
TRACK* track = new TRACK( m_board );
const SEG& s = seg->Seg();
track->SetStart( wxPoint( s.A.x, s.A.y ) );
track->SetEnd( wxPoint( s.B.x, s.B.y ) );
track->SetWidth( seg->Width() );
track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
newBI = track;
break;
}
case PNS::ITEM::VIA_T:
{
VIA* via_board = new VIA( m_board );
PNS::VIA* via = static_cast<PNS::VIA*>( aItem );
via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
ToLAYER_ID( via->Layers().End() ) );
newBI = via_board;
break;
}
default:
break;
}
if( newBI )
{
aItem->SetParent( newBI );
newBI->ClearFlags();
m_commit->Add( newBI );
}
}
TRACK* SPECCTRA_DB::makeTRACK( PATH* aPath, int aPointIndex, int aNetcode ) throw( IO_ERROR )
{
int layerNdx = findLayerName( aPath->layer_id );
if( layerNdx == -1 )
{
wxString layerName = FROM_UTF8( aPath->layer_id.c_str() );
THROW_IO_ERROR( wxString::Format( _("Session file uses invalid layer id \"%s\""),
GetChars( layerName ) ) );
}
TRACK* track = new TRACK( sessionBoard );
track->SetStart( mapPt( aPath->points[aPointIndex+0], routeResolution ) );
track->SetEnd( mapPt( aPath->points[aPointIndex+1], routeResolution ) );
track->SetLayer( pcbLayer2kicad[layerNdx] );
track->SetWidth( scale( aPath->aperture_width, routeResolution ) );
track->SetNetCode( aNetcode );
return track;
}
bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
unsigned itmp;
if( aTrack == NULL )
{
if( GetActiveLayer() != GetScreen()->m_Route_Layer_TOP )
SetActiveLayer( GetScreen()->m_Route_Layer_TOP );
else
SetActiveLayer( GetScreen()->m_Route_Layer_BOTTOM );
UpdateStatusBar();
return true;
}
// Avoid more than one via on the current location:
if( GetBoard()->GetViaByPosition( g_CurrentTrackSegment->GetEnd(),
g_CurrentTrackSegment->GetLayer() ) )
return false;
for( TRACK* segm = g_FirstTrackSegment; segm; segm = segm->Next() )
{
if( segm->Type() == PCB_VIA_T && g_CurrentTrackSegment->GetEnd() == segm->GetStart() )
return false;
}
// Is the current segment Ok (no DRC error) ?
if( g_Drc_On )
{
if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
// DRC error, the change layer is not made
return false;
// Handle 2 segments.
if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
{
if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(), GetBoard()->m_Track ) )
return false;
}
}
/* Save current state before placing a via.
* If the via cannot be placed this current state will be reused
*/
itmp = g_CurrentTrackList.GetCount();
Begin_Route( g_CurrentTrackSegment, DC );
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// create the via
VIA* via = new VIA( GetBoard() );
via->SetFlags( IS_NEW );
via->SetViaType( GetDesignSettings().m_CurrentViaType );
via->SetNetCode( GetBoard()->GetHighLightNetCode() );
via->SetPosition( g_CurrentTrackSegment->GetEnd() );
// for microvias, the size and hole will be changed later.
via->SetWidth( GetDesignSettings().GetCurrentViaSize());
via->SetDrill( GetDesignSettings().GetCurrentViaDrill() );
// Usual via is from copper to component.
// layer pair is B_Cu and F_Cu.
via->SetLayerPair( B_Cu, F_Cu );
LAYER_ID first_layer = GetActiveLayer();
LAYER_ID last_layer;
// prepare switch to new active layer:
if( first_layer != GetScreen()->m_Route_Layer_TOP )
last_layer = GetScreen()->m_Route_Layer_TOP;
else
last_layer = GetScreen()->m_Route_Layer_BOTTOM;
// Adjust the actual via layer pair
switch( via->GetViaType() )
{
case VIA_BLIND_BURIED:
via->SetLayerPair( first_layer, last_layer );
break;
case VIA_MICROVIA: // from external to the near neighbor inner layer
{
LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );
if( first_layer == B_Cu )
last_layer = last_inner_layer;
else if( first_layer == F_Cu )
last_layer = In1_Cu;
else if( first_layer == last_inner_layer )
last_layer = B_Cu;
else if( first_layer == In1_Cu )
last_layer = F_Cu;
// else error: will be removed later
via->SetLayerPair( first_layer, last_layer );
// Update diameter and hole size, which where set previously
// for normal vias
NETINFO_ITEM* net = via->GetNet();
via->SetWidth( net->GetMicroViaSize() );
via->SetDrill( net->GetMicroViaDrillSize() );
}
break;
default:
break;
}
if( g_Drc_On && BAD_DRC == m_drc->Drc( via, GetBoard()->m_Track ) )
{
// DRC fault: the Via cannot be placed here ...
delete via;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// delete the track(s) added in Begin_Route()
while( g_CurrentTrackList.GetCount() > itmp )
{
Delete_Segment( DC, g_CurrentTrackSegment );
}
SetCurItem( g_CurrentTrackSegment, false );
// Refresh DRC diag, erased by previous calls
if( m_drc->GetCurrentMarker() )
SetMsgPanel( m_drc->GetCurrentMarker() );
return false;
}
SetActiveLayer( last_layer );
TRACK* lastNonVia = g_CurrentTrackSegment;
/* A new via was created. It was Ok.
*/
g_CurrentTrackList.PushBack( via );
/* The via is now in linked list and we need a new track segment
* after the via, starting at via location.
* it will become the new current segment (from via to the mouse cursor)
*/
TRACK* track = (TRACK*)lastNonVia->Clone();
/* the above creates a new segment from the last entered segment, with the
* current width, flags, netcode, etc... values.
* layer, start and end point are not correct,
* and will be modified next
*/
// set the layer to the new value
track->SetLayer( GetActiveLayer() );
/* the start point is the via position and the end point is the cursor
* which also is on the via (will change when moving mouse)
*/
track->SetEnd( via->GetStart() );
track->SetStart( via->GetStart() );
g_CurrentTrackList.PushBack( track );
if( g_TwoSegmentTrackBuild )
{
// Create a second segment (we must have 2 track segments to adjust)
g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
}
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
SetMsgPanel( via );
UpdateStatusBar();
return true;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply( COMMIT& aCommit )
{
if( !check() )
return false;
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
aCommit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
assert( false );
break;
}
}
return true;
}
void PNS_ROUTER::CommitRouting( PNS_NODE* aNode )
{
PNS_NODE::ITEM_VECTOR removed, added;
aNode->GetUpdatedItems( removed, added );
for( unsigned int i = 0; i < removed.size(); i++ )
{
BOARD_CONNECTED_ITEM* parent = removed[i]->Parent();
if( parent )
{
m_view->Remove( parent );
m_board->Remove( parent );
m_undoBuffer.PushItem( ITEM_PICKER( parent, UR_DELETED ) );
}
}
for( PNS_ITEM* item : added )
{
BOARD_CONNECTED_ITEM* newBI = NULL;
switch( item->Kind() )
{
case PNS_ITEM::SEGMENT:
{
PNS_SEGMENT* seg = static_cast<PNS_SEGMENT*>( item );
TRACK* track = new TRACK( m_board );
const SEG& s = seg->Seg();
track->SetStart( wxPoint( s.A.x, s.A.y ) );
track->SetEnd( wxPoint( s.B.x, s.B.y ) );
track->SetWidth( seg->Width() );
track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
newBI = track;
break;
}
case PNS_ITEM::VIA:
{
VIA* via_board = new VIA( m_board );
PNS_VIA* via = static_cast<PNS_VIA*>( item );
via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
ToLAYER_ID( via->Layers().End() ) );
newBI = via_board;
break;
}
default:
break;
}
if( newBI )
{
item->SetParent( newBI );
newBI->ClearFlags();
m_view->Add( newBI );
m_board->Add( newBI );
m_undoBuffer.PushItem( ITEM_PICKER( newBI, UR_NEW ) );
newBI->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
m_board->GetRatsnest()->Recalculate();
m_world->Commit( aNode );
}
bool DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow()
{
auto connectivity = m_frame->GetBoard()->GetConnectivity();
int newNetCode = m_netSelector->GetSelectedNetcode();
std::vector<D_PAD*> changingPads;
if ( !m_netSelector->IsIndeterminate() )
{
std::set<D_PAD*> connectedPads;
for( auto& item : m_items )
{
const KICAD_T ourTypes[] = { PCB_TRACE_T, PCB_PAD_T, PCB_VIA_T, PCB_MODULE_T, EOT };
auto connectedItems = connectivity->GetConnectedItems( static_cast<BOARD_CONNECTED_ITEM*>( item ), ourTypes, true );
for ( auto citem : connectedItems )
{
if( citem->Type() == PCB_PAD_T )
{
connectedPads.insert( static_cast<D_PAD*>( citem ) );
}
}
}
for( D_PAD* pad : connectedPads )
{
if( pad->GetNetCode() != newNetCode )
changingPads.push_back( pad );
}
}
// Run validations:
if( changingPads.size() )
{
if( !confirmPadChange( changingPads ) )
return false;
}
if( m_vias )
{
if( !m_viaDiameter.Validate( GEOMETRY_MIN_SIZE, INT_MAX )
|| !m_viaDrill.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
if( m_ViaDiameterCtrl->IsEnabled() && !m_viaDiameter.IsIndeterminate()
&& m_ViaDrillCtrl->IsEnabled() && !m_viaDrill.IsIndeterminate()
&& m_viaDiameter.GetValue() <= m_viaDrill.GetValue() )
{
DisplayError( GetParent(), _( "Via drill size must be smaller than via diameter" ) );
m_ViaDrillCtrl->SelectAll();
m_ViaDrillCtrl->SetFocus();
return false;
}
if( m_ViaStartLayer->GetLayerSelection() != UNDEFINED_LAYER &&
m_ViaStartLayer->GetLayerSelection() == m_ViaEndLayer->GetLayerSelection() )
{
DisplayError( GetParent(), _( "Via start layer and end layer cannot be the same" ) );
return false;
}
}
if( m_tracks )
{
if( !m_trackWidth.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
}
// If we survived that, then save the changes:
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
m_commit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
wxASSERT( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( !m_trackStartX.IsIndeterminate() )
t->SetStart( wxPoint( m_trackStartX.GetValue(), t->GetStart().y ) );
if( !m_trackStartY.IsIndeterminate() )
t->SetStart( wxPoint( t->GetStart().x, m_trackStartY.GetValue() ) );
if( !m_trackEndX.IsIndeterminate() )
t->SetEnd( wxPoint( m_trackEndX.GetValue(), t->GetEnd().y ) );
if( !m_trackEndY.IsIndeterminate() )
t->SetEnd( wxPoint( t->GetEnd().x, m_trackEndY.GetValue() ) );
if( m_trackNetclass->IsChecked() )
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
else if( !m_trackWidth.IsIndeterminate() )
t->SetWidth( m_trackWidth.GetValue() );
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (PCB_LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
if ( !m_netSelector->IsIndeterminate() )
t->SetNetCode( m_netSelector->GetSelectedNetcode() );
break;
}
case PCB_VIA_T:
{
wxASSERT( m_vias );
VIA* v = static_cast<VIA*>( item );
if( !m_viaX.IsIndeterminate() )
v->SetPosition( wxPoint( m_viaX.GetValue(), v->GetPosition().y ) );
if( !m_viaY.IsIndeterminate() )
v->SetPosition( wxPoint( v->GetPosition().x, m_viaY.GetValue() ) );
if( m_ViaTypeChoice->GetSelection() != 3)
{
switch( m_ViaTypeChoice->GetSelection() )
{
default:
case 0: v->SetViaType( VIA_THROUGH ); v->SanitizeLayers(); break;
case 1: v->SetViaType( VIA_MICROVIA ); break;
case 2: v->SetViaType( VIA_BLIND_BURIED ); break;
}
}
auto startLayer = static_cast<PCB_LAYER_ID>( m_ViaStartLayer->GetLayerSelection() );
auto endLayer = static_cast<PCB_LAYER_ID>( m_ViaEndLayer->GetLayerSelection() );
if (startLayer != UNDEFINED_LAYER )
v->SetTopLayer( startLayer );
if (endLayer != UNDEFINED_LAYER )
v->SetBottomLayer( endLayer );
v->SanitizeLayers();
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( !m_viaDiameter.IsIndeterminate() )
v->SetWidth( m_viaDiameter.GetValue() );
if( !m_viaDrill.IsIndeterminate() )
v->SetDrill( m_viaDrill.GetValue() );
}
if ( !m_netSelector->IsIndeterminate() )
v->SetNetCode( m_netSelector->GetSelectedNetcode() );
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
wxASSERT( false );
break;
}
}
if ( !m_netSelector->IsIndeterminate() )
{
// Commit::Push() will rebuild connectivitiy propagating nets from connected pads
// outwards. We therefore have to update the connected pads in order for the net
// change to "stick".
for( D_PAD* pad : changingPads )
{
m_commit.Modify( pad );
pad->SetNetCode( m_netSelector->GetSelectedNetcode() );
}
}
m_commit.Push( _( "Edit track/via properties" ) );
return true;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply()
{
if( !check() )
return false;
for( int i = 0; i < m_items.Size(); ++i )
{
BOARD_ITEM* item = m_items.Item<BOARD_ITEM>( i );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
break;
}
default:
assert( false );
break;
}
}
return true;
}
