void PNS_KICAD_IFACE::AddItem( PNS::ITEM* aItem )
{
BOARD_CONNECTED_ITEM* newBI = NULL;
switch( aItem->Kind() )
{
case PNS::ITEM::SEGMENT_T:
{
PNS::SEGMENT* seg = static_cast<PNS::SEGMENT*>( aItem );
TRACK* track = new TRACK( m_board );
const SEG& s = seg->Seg();
track->SetStart( wxPoint( s.A.x, s.A.y ) );
track->SetEnd( wxPoint( s.B.x, s.B.y ) );
track->SetWidth( seg->Width() );
track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
newBI = track;
break;
}
case PNS::ITEM::VIA_T:
{
VIA* via_board = new VIA( m_board );
PNS::VIA* via = static_cast<PNS::VIA*>( aItem );
via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
ToLAYER_ID( via->Layers().End() ) );
newBI = via_board;
break;
}
default:
break;
}
if( newBI )
{
aItem->SetParent( newBI );
newBI->ClearFlags();
m_commit->Add( newBI );
}
}
TRACK* SPECCTRA_DB::makeTRACK( PATH* aPath, int aPointIndex, int aNetcode ) throw( IO_ERROR )
{
int layerNdx = findLayerName( aPath->layer_id );
if( layerNdx == -1 )
{
wxString layerName = FROM_UTF8( aPath->layer_id.c_str() );
THROW_IO_ERROR( wxString::Format( _("Session file uses invalid layer id \"%s\""),
GetChars( layerName ) ) );
}
TRACK* track = new TRACK( sessionBoard );
track->SetStart( mapPt( aPath->points[aPointIndex+0], routeResolution ) );
track->SetEnd( mapPt( aPath->points[aPointIndex+1], routeResolution ) );
track->SetLayer( pcbLayer2kicad[layerNdx] );
track->SetWidth( scale( aPath->aperture_width, routeResolution ) );
track->SetNetCode( aNetcode );
return track;
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
{
return;
}
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
EXCHG(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
EXCHG(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
if( pnext != Next() || pback != Back() )
{
Pnext = pnext;
Pback = pback;
#ifdef DEBUG
wxLogMessage( wxT( "SwapData Error: %s Pnext or Pback pointers modified" ),
GetClass().GetData() );
#endif
}
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply( COMMIT& aCommit )
{
if( !check() )
return false;
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
aCommit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
assert( false );
break;
}
}
return true;
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
return;
// Remark: to create images of edited items to undo, we are using Clone method
// which can duplication of items foe copy, but does not clone all members
// mainly pointers in chain and time stamp, which is set to new, unique value.
// So we have to use the current values of these parameters.
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
DHEAD* mylist = m_List;
time_t timestamp = GetTimeStamp();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
std::swap(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
std::swap(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
// Restore pointers and time stamp, to be sure they are not broken
Pnext = pnext;
Pback = pback;
m_List = mylist;
SetTimeStamp( timestamp );
}
void PNS_ROUTER::CommitRouting( PNS_NODE* aNode )
{
PNS_NODE::ITEM_VECTOR removed, added;
aNode->GetUpdatedItems( removed, added );
for( unsigned int i = 0; i < removed.size(); i++ )
{
BOARD_CONNECTED_ITEM* parent = removed[i]->Parent();
if( parent )
{
m_view->Remove( parent );
m_board->Remove( parent );
m_undoBuffer.PushItem( ITEM_PICKER( parent, UR_DELETED ) );
}
}
for( PNS_ITEM* item : added )
{
BOARD_CONNECTED_ITEM* newBI = NULL;
switch( item->Kind() )
{
case PNS_ITEM::SEGMENT:
{
PNS_SEGMENT* seg = static_cast<PNS_SEGMENT*>( item );
TRACK* track = new TRACK( m_board );
const SEG& s = seg->Seg();
track->SetStart( wxPoint( s.A.x, s.A.y ) );
track->SetEnd( wxPoint( s.B.x, s.B.y ) );
track->SetWidth( seg->Width() );
track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
newBI = track;
break;
}
case PNS_ITEM::VIA:
{
VIA* via_board = new VIA( m_board );
PNS_VIA* via = static_cast<PNS_VIA*>( item );
via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
ToLAYER_ID( via->Layers().End() ) );
newBI = via_board;
break;
}
default:
break;
}
if( newBI )
{
item->SetParent( newBI );
newBI->ClearFlags();
m_view->Add( newBI );
m_board->Add( newBI );
m_undoBuffer.PushItem( ITEM_PICKER( newBI, UR_NEW ) );
newBI->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
m_board->GetRatsnest()->Recalculate();
m_world->Commit( aNode );
}
bool DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow()
{
auto connectivity = m_frame->GetBoard()->GetConnectivity();
int newNetCode = m_netSelector->GetSelectedNetcode();
std::vector<D_PAD*> changingPads;
if ( !m_netSelector->IsIndeterminate() )
{
std::set<D_PAD*> connectedPads;
for( auto& item : m_items )
{
const KICAD_T ourTypes[] = { PCB_TRACE_T, PCB_PAD_T, PCB_VIA_T, PCB_MODULE_T, EOT };
auto connectedItems = connectivity->GetConnectedItems( static_cast<BOARD_CONNECTED_ITEM*>( item ), ourTypes, true );
for ( auto citem : connectedItems )
{
if( citem->Type() == PCB_PAD_T )
{
connectedPads.insert( static_cast<D_PAD*>( citem ) );
}
}
}
for( D_PAD* pad : connectedPads )
{
if( pad->GetNetCode() != newNetCode )
changingPads.push_back( pad );
}
}
// Run validations:
if( changingPads.size() )
{
if( !confirmPadChange( changingPads ) )
return false;
}
if( m_vias )
{
if( !m_viaDiameter.Validate( GEOMETRY_MIN_SIZE, INT_MAX )
|| !m_viaDrill.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
if( m_ViaDiameterCtrl->IsEnabled() && !m_viaDiameter.IsIndeterminate()
&& m_ViaDrillCtrl->IsEnabled() && !m_viaDrill.IsIndeterminate()
&& m_viaDiameter.GetValue() <= m_viaDrill.GetValue() )
{
DisplayError( GetParent(), _( "Via drill size must be smaller than via diameter" ) );
m_ViaDrillCtrl->SelectAll();
m_ViaDrillCtrl->SetFocus();
return false;
}
if( m_ViaStartLayer->GetLayerSelection() != UNDEFINED_LAYER &&
m_ViaStartLayer->GetLayerSelection() == m_ViaEndLayer->GetLayerSelection() )
{
DisplayError( GetParent(), _( "Via start layer and end layer cannot be the same" ) );
return false;
}
}
if( m_tracks )
{
if( !m_trackWidth.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
}
// If we survived that, then save the changes:
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
m_commit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
wxASSERT( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( !m_trackStartX.IsIndeterminate() )
t->SetStart( wxPoint( m_trackStartX.GetValue(), t->GetStart().y ) );
if( !m_trackStartY.IsIndeterminate() )
t->SetStart( wxPoint( t->GetStart().x, m_trackStartY.GetValue() ) );
if( !m_trackEndX.IsIndeterminate() )
t->SetEnd( wxPoint( m_trackEndX.GetValue(), t->GetEnd().y ) );
if( !m_trackEndY.IsIndeterminate() )
t->SetEnd( wxPoint( t->GetEnd().x, m_trackEndY.GetValue() ) );
if( m_trackNetclass->IsChecked() )
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
else if( !m_trackWidth.IsIndeterminate() )
t->SetWidth( m_trackWidth.GetValue() );
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (PCB_LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
if ( !m_netSelector->IsIndeterminate() )
t->SetNetCode( m_netSelector->GetSelectedNetcode() );
break;
}
case PCB_VIA_T:
{
wxASSERT( m_vias );
VIA* v = static_cast<VIA*>( item );
if( !m_viaX.IsIndeterminate() )
v->SetPosition( wxPoint( m_viaX.GetValue(), v->GetPosition().y ) );
if( !m_viaY.IsIndeterminate() )
v->SetPosition( wxPoint( v->GetPosition().x, m_viaY.GetValue() ) );
if( m_ViaTypeChoice->GetSelection() != 3)
{
switch( m_ViaTypeChoice->GetSelection() )
{
default:
case 0: v->SetViaType( VIA_THROUGH ); v->SanitizeLayers(); break;
case 1: v->SetViaType( VIA_MICROVIA ); break;
case 2: v->SetViaType( VIA_BLIND_BURIED ); break;
}
}
auto startLayer = static_cast<PCB_LAYER_ID>( m_ViaStartLayer->GetLayerSelection() );
auto endLayer = static_cast<PCB_LAYER_ID>( m_ViaEndLayer->GetLayerSelection() );
if (startLayer != UNDEFINED_LAYER )
v->SetTopLayer( startLayer );
if (endLayer != UNDEFINED_LAYER )
v->SetBottomLayer( endLayer );
v->SanitizeLayers();
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( !m_viaDiameter.IsIndeterminate() )
v->SetWidth( m_viaDiameter.GetValue() );
if( !m_viaDrill.IsIndeterminate() )
v->SetDrill( m_viaDrill.GetValue() );
}
if ( !m_netSelector->IsIndeterminate() )
v->SetNetCode( m_netSelector->GetSelectedNetcode() );
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
wxASSERT( false );
break;
}
}
if ( !m_netSelector->IsIndeterminate() )
{
// Commit::Push() will rebuild connectivitiy propagating nets from connected pads
// outwards. We therefore have to update the connected pads in order for the net
// change to "stick".
for( D_PAD* pad : changingPads )
{
m_commit.Modify( pad );
pad->SetNetCode( m_netSelector->GetSelectedNetcode() );
}
}
m_commit.Push( _( "Edit track/via properties" ) );
return true;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply()
{
if( !check() )
return false;
for( int i = 0; i < m_items.Size(); ++i )
{
BOARD_ITEM* item = m_items.Item<BOARD_ITEM>( i );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
break;
}
default:
assert( false );
break;
}
}
return true;
}
/**
* Function SwapData
* Used in undo / redo command:
* swap data between Item and a copy
* swapped data is data modified by edition, mainly sizes and texts
* so ONLY FEW values are swapped
* @param aItem = the item
* @param aImage = a copy of the item
*/
void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
{
if( aItem == NULL || aImage == NULL )
{
wxMessageBox( wxT( "SwapData error: NULL pointer" ) );
return;
}
// Swap layers:
if( aItem->Type() != PCB_MODULE_T && aItem->Type() != PCB_ZONE_AREA_T )
{
// These items have a global swap function.
int layer, layerimg;
layer = aItem->GetLayer();
layerimg = aImage->GetLayer();
aItem->SetLayer( layerimg );
aImage->SetLayer( layer );
}
switch( aItem->Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) aItem );
( (MODULE*) aItem )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) aItem );
( (ZONE_CONTAINER*) aItem )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
#if 0
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Start, ( (DRAWSEGMENT*) aImage )->m_Start );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_End, ( (DRAWSEGMENT*) aImage )->m_End );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Width, ( (DRAWSEGMENT*) aImage )->m_Width );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Shape, ( (DRAWSEGMENT*) aImage )->m_Shape );
#else
{
DRAWSEGMENT tmp = *(DRAWSEGMENT*) aImage;
*aImage = *aItem;
*aItem = tmp;
}
#endif
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) aItem;
TRACK* image = (TRACK*) aImage;
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart(); track->SetStart( image->GetStart() ); image->SetStart( exchp );
exchp = track->GetEnd(); track->SetEnd( image->GetEnd() ); image->SetEnd( exchp );
int atmp = track->GetWidth(); track->SetWidth( image->GetWidth() ); image->SetWidth( atmp );
atmp = track->GetShape(); track->SetShape( image->GetShape() ); image->SetShape( atmp );
atmp = track->GetDrillValue();
if( track->IsDrillDefault() )
atmp = -1;
int itmp = image->GetDrillValue();
if( image->IsDrillDefault() )
itmp = -1;
EXCHG(itmp, atmp );
if( atmp > 0 )
track->SetDrill( atmp );
else
track->SetDrillDefault();
if( itmp > 0 )
image->SetDrill( itmp );
else
image->SetDrillDefault();
}
break;
case PCB_TEXT_T:
EXCHG( ( (TEXTE_PCB*) aItem )->m_Mirror, ( (TEXTE_PCB*) aImage )->m_Mirror );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Size, ( (TEXTE_PCB*) aImage )->m_Size );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Pos, ( (TEXTE_PCB*) aImage )->m_Pos );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Thickness, ( (TEXTE_PCB*) aImage )->m_Thickness );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Orient, ( (TEXTE_PCB*) aImage )->m_Orient );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Text, ( (TEXTE_PCB*) aImage )->m_Text );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Italic, ( (TEXTE_PCB*) aImage )->m_Italic );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Bold, ( (TEXTE_PCB*) aImage )->m_Bold );
EXCHG( ( (TEXTE_PCB*) aItem )->m_HJustify, ( (TEXTE_PCB*) aImage )->m_HJustify );
EXCHG( ( (TEXTE_PCB*) aItem )->m_VJustify, ( (TEXTE_PCB*) aImage )->m_VJustify );
break;
case PCB_TARGET_T:
( (PCB_TARGET*) aItem )->Exchg( (PCB_TARGET*) aImage );
break;
case PCB_DIMENSION_T:
{
wxString txt = ( (DIMENSION*) aItem )->GetText();
( (DIMENSION*) aItem )->SetText( ( (DIMENSION*) aImage )->GetText() );
( (DIMENSION*) aImage )->SetText( txt );
EXCHG( ( (DIMENSION*) aItem )->m_Width, ( (DIMENSION*) aImage )->m_Width );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Size, ( (DIMENSION*) aImage )->m_Text.m_Size );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Pos, ( (DIMENSION*) aImage )->m_Text.m_Pos );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Thickness,
( (DIMENSION*) aImage )->m_Text.m_Thickness );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Mirror,
( (DIMENSION*) aImage )->m_Text.m_Mirror );
}
break;
case PCB_ZONE_T:
default:
wxMessageBox( wxT( "SwapData() error: unexpected type" ) );
break;
}
}
