示例#1
0
// data is a pointer to a struct being serialized and typeInfo describes
// the struct. res is a result as a stream of bytes
static void SerializeType(byte *data, TypeSerializeInfo *typeInfo, Vec<byte>& msg)
{
    msg.Reset();
    // reserve space for the size of the message, which we only know
    // after serializeing the data. We're making an assumption here
    // that serialized data will be smaller than 65k
    // note: we can easily relax that by using uint32 for len
    uint16 *msgLenPtr = (uint16*)msg.AppendBlanks(2);
    uint16 msgId = (uint16)typeInfo->msgId;
    int msgLen = SerNum16((byte*)&msgId, msg);

    for (MemberSerializeInfo *member = typeInfo->members; !member->IsSentinel(); ++ member) {
        switch (member->type) {
            case MemberSerializeInfo::UInt16:
                msgLen += SerNum16(data + member->offset, msg);
                break;
            case MemberSerializeInfo::Int32:
            case MemberSerializeInfo::UInt32:
                msgLen += SerNum32(data + member->offset, msg);
                break;
            case MemberSerializeInfo::Int64:
            case MemberSerializeInfo::UInt64:
                msgLen += SerNum32(data + member->offset, msg);
                break;
        }
    }
    *msgLenPtr = (uint16)msgLen;
}
示例#2
0
int Pdfsync::SourceToDoc(const WCHAR* srcfilename, UINT line, UINT col, UINT* page, Vec<RectI>& rects) {
    if (IsIndexDiscarded())
        if (RebuildIndex() != PDFSYNCERR_SUCCESS)
            return PDFSYNCERR_SYNCFILE_CANNOT_BE_OPENED;

    Vec<size_t> found_records;
    UINT ret = SourceToRecord(srcfilename, line, col, found_records);
    if (ret != PDFSYNCERR_SUCCESS || found_records.size() == 0)
        return ret;

    rects.Reset();

    // records have been found for the desired source position:
    // we now find the page and positions in the PDF corresponding to these found records
    UINT firstPage = UINT_MAX;
    for (size_t i = 0; i < points.size(); i++) {
        if (!found_records.Contains(points.at(i).record))
            continue;
        if (firstPage != UINT_MAX && firstPage != points.at(i).page)
            continue;
        firstPage = *page = points.at(i).page;
        RectD rc(SYNC_TO_PDF_COORDINATE(points.at(i).x), SYNC_TO_PDF_COORDINATE(points.at(i).y), MARK_SIZE, MARK_SIZE);
        // PdfSync coordinates are y-inversed
        RectD mbox = engine->PageMediabox(firstPage);
        rc.y = mbox.dy - (rc.y + rc.dy);
        rects.Push(rc.Round());
    }

    if (rects.size() > 0)
        return PDFSYNCERR_SUCCESS;
    // the record does not correspond to any point in the PDF: this is possible...
    return PDFSYNCERR_NOSYNCPOINT_FOR_LINERECORD;
}
void DjVuEngineImpl::UpdateUserAnnotations(Vec<PageAnnotation> *list)
{
    ScopedCritSec scope(&gDjVuContext.lock);
    if (list)
        userAnnots = *list;
    else
        userAnnots.Reset();
}
示例#4
0
static void VecTest()
{
    Vec<int> ints;
    assert(ints.Count() == 0);
    ints.Append(1);
    ints.Push(2);
    ints.InsertAt(0, -1);
    assert(ints.Count() == 3);
    assert(ints.At(0) == -1 && ints.At(1) == 1 && ints.At(2) == 2);
    assert(ints.At(0) == -1 && ints.Last() == 2);
    int last = ints.Pop();
    assert(last == 2);
    assert(ints.Count() == 2);
    ints.Push(3);
    ints.RemoveAt(0);
    assert(ints.Count() == 2);
    assert(ints.At(0) == 1 && ints.At(1) == 3);
    ints.Reset();
    assert(ints.Count() == 0);

    for (int i = 0; i < 1000; i++) {
        ints.Push(i);
    }
    assert(ints.Count() == 1000 && ints.At(500) == 500);
    ints.Remove(500);
    assert(ints.Count() == 999 && ints.At(500) == 501);
    last = ints.Pop();
    assert(last == 999);
    ints.Append(last);
    assert(ints.AtPtr(501) == &ints.At(501));

    {
        Vec<int> ints2(ints);
        assert(ints2.Count() == 999);
        assert(ints.LendData() != ints2.LendData());
        ints.Remove(600);
        assert(ints.Count() < ints2.Count());
        ints2 = ints;
        assert(ints2.Count() == 998);
    }

    {
        char buf[2] = {'a', '\0'};
        str::Str<char> v(0);
        for (int i = 0; i < 7; i++) {
            v.Append(buf, 1);
            buf[0] = buf[0] + 1;
        }
        char *s = v.LendData();
        assert(str::Eq("abcdefg", s));
        assert(7 == v.Count());
        v.Set("helo");
        assert(4 == v.Count());
        assert(str::Eq("helo", v.LendData()));
    }

    {
        str::Str<char> v(128);
        v.Append("boo", 3);
        assert(str::Eq("boo", v.LendData()));
        assert(v.Count() == 3);
        v.Append("fop");
        assert(str::Eq("boofop", v.LendData()));
        assert(v.Count() == 6);
        v.RemoveAt(2, 3);
        assert(v.Count() == 3);
        assert(str::Eq("bop", v.LendData()));
        v.Append('a');
        assert(v.Count() == 4);
        assert(str::Eq("bopa", v.LendData()));
        char *s = v.StealData();
        assert(str::Eq("bopa", s));
        free(s);
        assert(v.Count() == 0);
    }

    {
        str::Str<char> v(0);
        for (int i = 0; i < 32; i++) {
            assert(v.Count() == i * 6);
            v.Append("lambd", 5);
            if (i % 2 == 0)
                v.Append('a');
            else
                v.Push('a');
        }

        for (int i=1; i<=16; i++) {
            v.RemoveAt((16 - i) * 6, 6);
            assert(v.Count() == (32 - i) * 6);
        }

        v.RemoveAt(0, 6 * 15);
        assert(v.Count() == 6);
        char *s = v.LendData();
        assert(str::Eq(s, "lambda"));
        s = v.StealData();
        assert(str::Eq(s, "lambda"));
        free(s);
        assert(v.Count() == 0);

        v.Append("lambda");
        assert(str::Eq(v.LendData(), "lambda"));
        char c = v.Pop();
        assert(c == 'a');
        assert(str::Eq(v.LendData(), "lambd"));
    }

    VecTestAppendFmt();

    {
        Vec<PointI *> v;
        srand((unsigned int)time(NULL));
        for (int i = 0; i < 128; i++) {
            v.Append(new PointI(i, i));
            size_t pos = rand() % v.Count();
            v.InsertAt(pos, new PointI(i, i));
        }
        assert(v.Count() == 128 * 2);
        size_t idx = 0;
        for (PointI **p = v.IterStart(); p; p = v.IterNext()) {
            assert(idx == v.IterIdx());
            ++idx;
        }

        while (v.Count() > 64) {
            size_t pos = rand() % v.Count();
            PointI *f = v.At(pos);
            v.Remove(f);
            delete f;
        }
        DeleteVecMembers(v);
    }

    {
        Vec<int> v;
        v.Append(2);
        for (int i = 0; i < 500; i++)
            v.Append(4);
        v.At(250) = 5;
        v.Reverse();
        assert(v.Count() == 501 && v.At(0) == 4 && v.At(249) == v.At(251) && v.At(250) == 5 && v.At(500) == 2);
        v.Remove(4);
        v.Reverse();
        assert(v.Count() == 500 && v.At(0) == 2 && v.At(249) == v.At(251) && v.At(250) == 5 && v.At(499) == 4);
    }
}
/* Draws the about screen and remembers some state for hyperlinking.
   It transcribes the design I did in graphics software - hopeless
   to understand without seeing the design. */
static void DrawAbout(HWND hwnd, HDC hdc, RectI rect, Vec<StaticLinkInfo>& linkInfo)
{
    HPEN penBorder = CreatePen(PS_SOLID, ABOUT_LINE_OUTER_SIZE, WIN_COL_BLACK);
    HPEN penDivideLine = CreatePen(PS_SOLID, ABOUT_LINE_SEP_SIZE, WIN_COL_BLACK);
    HPEN penLinkLine = CreatePen(PS_SOLID, ABOUT_LINE_SEP_SIZE, COL_BLUE_LINK);

    ScopedFont fontLeftTxt(GetSimpleFont(hdc, LEFT_TXT_FONT, LEFT_TXT_FONT_SIZE));
    ScopedFont fontRightTxt(GetSimpleFont(hdc, RIGHT_TXT_FONT, RIGHT_TXT_FONT_SIZE));

    HGDIOBJ origFont = SelectObject(hdc, fontLeftTxt); /* Just to remember the orig font */

    ClientRect rc(hwnd);
    RECT rTmp = rc.ToRECT();
    ScopedGdiObj<HBRUSH> brushAboutBg(CreateSolidBrush(GetAboutBgColor()));
    FillRect(hdc, &rTmp, brushAboutBg);

    /* render title */
    RectI titleRect(rect.TL(), CalcSumatraVersionSize(hdc));

    ScopedGdiObj<HBRUSH> bgBrush(CreateSolidBrush(GetLogoBgColor()));
    SelectObject(hdc, bgBrush);
    SelectObject(hdc, penBorder);
#ifndef ABOUT_USE_LESS_COLORS
    Rectangle(hdc, rect.x, rect.y + ABOUT_LINE_OUTER_SIZE, rect.x + rect.dx, rect.y + titleRect.dy + ABOUT_LINE_OUTER_SIZE);
#else
    RectI titleBgBand(0, rect.y, rc.dx, titleRect.dy);
    RECT rcLogoBg = titleBgBand.ToRECT();
    FillRect(hdc, &rcLogoBg, bgBrush);
    PaintLine(hdc, RectI(0, rect.y, rc.dx, 0));
    PaintLine(hdc, RectI(0, rect.y + titleRect.dy, rc.dx, 0));
#endif

    titleRect.Offset((rect.dx - titleRect.dx) / 2, 0);
    DrawSumatraVersion(hdc, titleRect);

    /* render attribution box */
    SetTextColor(hdc, ABOUT_BORDER_COL);
    SetBkMode(hdc, TRANSPARENT);

#ifndef ABOUT_USE_LESS_COLORS
    Rectangle(hdc, rect.x, rect.y + titleRect.dy, rect.x + rect.dx, rect.y + rect.dy);
#endif

    /* render text on the left*/
    SelectObject(hdc, fontLeftTxt);
    for (AboutLayoutInfoEl *el = gAboutLayoutInfo; el->leftTxt; el++) {
        TextOut(hdc, el->leftPos.x, el->leftPos.y, el->leftTxt, (int)str::Len(el->leftTxt));
    }

    /* render text on the right */
    SelectObject(hdc, fontRightTxt);
    SelectObject(hdc, penLinkLine);
    linkInfo.Reset();
    for (AboutLayoutInfoEl *el = gAboutLayoutInfo; el->leftTxt; el++) {
        bool hasUrl = HasPermission(Perm_DiskAccess) && el->url;
        SetTextColor(hdc, hasUrl ? COL_BLUE_LINK : ABOUT_BORDER_COL);
        TextOut(hdc, el->rightPos.x, el->rightPos.y, el->rightTxt, (int)str::Len(el->rightTxt));

        if (hasUrl) {
            int underlineY = el->rightPos.y + el->rightPos.dy - 3;
            PaintLine(hdc, RectI(el->rightPos.x, underlineY, el->rightPos.dx, 0));
            linkInfo.Append(StaticLinkInfo(el->rightPos, el->url, el->url));
        }
    }

    SelectObject(hdc, penDivideLine);
    RectI divideLine(gAboutLayoutInfo[0].rightPos.x - ABOUT_LEFT_RIGHT_SPACE_DX,
                     rect.y + titleRect.dy + 4, 0, rect.y + rect.dy - 4 - gAboutLayoutInfo[0].rightPos.y);
    PaintLine(hdc, divideLine);

    SelectObject(hdc, origFont);

    DeleteObject(penBorder);
    DeleteObject(penDivideLine);
    DeleteObject(penLinkLine);
}
示例#6
0
int SyncTex::SourceToDoc(const WCHAR* srcfilename, UINT line, UINT col, UINT *page, Vec<RectI> &rects)
{
    if (IsIndexDiscarded())
        if (RebuildIndex() != PDFSYNCERR_SUCCESS)
            return PDFSYNCERR_SYNCFILE_CANNOT_BE_OPENED;
    assert(this->scanner);

    ScopedMem<WCHAR> srcfilepath;
    // convert the source file to an absolute path
    if (PathIsRelative(srcfilename))
        srcfilepath.Set(PrependDir(srcfilename));
    else
        srcfilepath.Set(str::Dup(srcfilename));
    if (!srcfilepath)
        return PDFSYNCERR_OUTOFMEMORY;

    bool isUtf8 = true;
    char *mb_srcfilepath = str::conv::ToUtf8(srcfilepath);
TryAgainAnsi:
    if (!mb_srcfilepath)
        return PDFSYNCERR_OUTOFMEMORY;
    int ret = synctex_display_query(this->scanner, mb_srcfilepath, line, col);
    free(mb_srcfilepath);
    // recent SyncTeX versions encode in UTF-8 instead of ANSI
    if (isUtf8 && -1 == ret) {
        isUtf8 = false;
        mb_srcfilepath = str::conv::ToAnsi(srcfilepath);
        goto TryAgainAnsi;
    }

    if (-1 == ret)
        return PDFSYNCERR_UNKNOWN_SOURCEFILE;
    if (0 == ret)
        return PDFSYNCERR_NOSYNCPOINT_FOR_LINERECORD;

    synctex_node_t node;
    int firstpage = -1;
    rects.Reset();

    while ((node = synctex_next_result(this->scanner)) != NULL) {
        if (firstpage == -1) {
            firstpage = synctex_node_page(node);
            if (firstpage <= 0 || firstpage > engine->PageCount())
                continue;
            *page = (UINT)firstpage;
        }
        if (synctex_node_page(node) != firstpage)
            continue;

        RectD rc;
        rc.x  = synctex_node_box_visible_h(node);
        rc.y  = synctex_node_box_visible_v(node) - synctex_node_box_visible_height(node);
        rc.dx = synctex_node_box_visible_width(node),
        rc.dy = synctex_node_box_visible_height(node) + synctex_node_box_visible_depth(node);
        rects.Push(rc.Round());
    }

    if (firstpage <= 0)
        return PDFSYNCERR_NOSYNCPOINT_FOR_LINERECORD;
    return PDFSYNCERR_SUCCESS;
}
示例#7
0
// see http://itexmac.sourceforge.net/pdfsync.html for the specification
int Pdfsync::RebuildIndex()
{
    size_t len;
    ScopedMem<char> data(file::ReadAll(syncfilepath, &len));
    if (!data)
        return PDFSYNCERR_SYNCFILE_CANNOT_BE_OPENED;
    // convert the file data into a list of zero-terminated strings
    str::TransChars(data, "\r\n", "\0\0");

    // parse preamble (jobname and version marker)
    char *line = data;
    char *dataEnd = data + len;

    // replace star by spaces (TeX uses stars instead of spaces in filenames)
    str::TransChars(line, "*/", " \\");
    ScopedMem<WCHAR> jobName(str::conv::FromAnsi(line));
    jobName.Set(str::Join(jobName, L".tex"));
    jobName.Set(PrependDir(jobName));

    line = Advance0Line(line, dataEnd);
    UINT versionNumber = 0;
    if (!line || !str::Parse(line, "version %u", &versionNumber) || versionNumber != 1)
        return PDFSYNCERR_SYNCFILE_CANNOT_BE_OPENED;

    // reset synchronizer database
    srcfiles.Reset();
    lines.Reset();
    points.Reset();
    fileIndex.Reset();
    sheetIndex.Reset();

    Vec<size_t> filestack;
    UINT page = 1;
    sheetIndex.Append(0);

    // add the initial tex file to the source file stack
    filestack.Push(srcfiles.Count());
    srcfiles.Append(jobName.StealData());
    PdfsyncFileIndex findex = { 0 };
    fileIndex.Append(findex);

    PdfsyncLine psline;
    PdfsyncPoint pspoint;

    // parse data
    UINT maxPageNo = engine->PageCount();
    while ((line = Advance0Line(line, dataEnd)) != NULL) {
        if (!line)
            break;
        switch (*line) {
        case 'l':
            psline.file = filestack.Last();
            if (str::Parse(line, "l %u %u %u", &psline.record, &psline.line, &psline.column))
                lines.Append(psline);
            else if (str::Parse(line, "l %u %u", &psline.record, &psline.line)) {
                psline.column = 0;
                lines.Append(psline);
            }
            // else dbg("Bad 'l' line in the pdfsync file");
            break;

        case 's':
            if (str::Parse(line, "s %u", &page))
                sheetIndex.Append(points.Count());
            // else dbg("Bad 's' line in the pdfsync file");
            // if (0 == page || page > maxPageNo)
            //     dbg("'s' line with invalid page number in the pdfsync file");
            break;

        case 'p':
            pspoint.page = page;
            if (0 == page || page > maxPageNo)
                /* ignore point for invalid page number */;
            else if (str::Parse(line, "p %u %u %u", &pspoint.record, &pspoint.x, &pspoint.y))
                points.Append(pspoint);
            else if (str::Parse(line, "p* %u %u %u", &pspoint.record, &pspoint.x, &pspoint.y))
                points.Append(pspoint);
            // else dbg("Bad 'p' line in the pdfsync file");
            break;

        case '(':
            {
                ScopedMem<WCHAR> filename(str::conv::FromAnsi(line + 1));
                // if the filename contains quotes then remove them
                // TODO: this should never happen!?
                if (filename[0] == '"' && filename[str::Len(filename) - 1] == '"')
                    filename.Set(str::DupN(filename + 1, str::Len(filename) - 2));
                // undecorate the filepath: replace * by space and / by \ 
                str::TransChars(filename, L"*/", L" \\");
                // if the file name extension is not specified then add the suffix '.tex'
                if (str::IsEmpty(path::GetExt(filename)))
                    filename.Set(str::Join(filename, L".tex"));
                // ensure that the path is absolute
                if (PathIsRelative(filename))
                    filename.Set(PrependDir(filename));

                filestack.Push(srcfiles.Count());
                srcfiles.Append(filename.StealData());
                findex.start = findex.end = lines.Count();
                fileIndex.Append(findex);
            }
            break;

        case ')':
            if (filestack.Count() > 1)
                fileIndex.At(filestack.Pop()).end = lines.Count();
            // else dbg("Unbalanced ')' line in the pdfsync file");
            break;

        default:
            // dbg("Ignoring invalid pdfsync line starting with '%c'", *line);
            break;
        }
    }

    fileIndex.At(0).end = lines.Count();
    assert(filestack.Count() == 1);

    return Synchronizer::RebuildIndex();
}