void TakeBlockToWall::setState(State state)
{
myState = state;
myNewState = true;
myStateStartTime.setToNow();
myStateStartPos = myRobot->getPose();
}
void basic_turn(int turnAngal)
{
// ArTime start;
// G_PTZHandler->reset();
//ArUtil::sleep(500);
//G_PTZHandler->tiltRel(-10);
//CameraMoveCount=0;
//robot.lock();
double robotHeading = robot.getPose().getTh();
robotHeading += turnAngal;
double robotCurrentX = robot.getPose().getX() ;
double robotCurrentY = robot.getPose().getY();
G_PathPlanning->pathPlanToPose(ArPose(robotCurrentX, robotCurrentY , robotHeading),true,true);
while(G_PathPlanning->getState() != ArPathPlanningTask::REACHED_GOAL );
//robot.setHeading(robot.getTh()+turnAngal);
// robot.unlock();
//start.setToNow();
//while (1)
//{
// robot.lock();
// if (robot.isHeadingDone())
// {
// printf(" Finished turn\n");
//
// ArUtil::sleep(50);
// cout << " current heading: " << " " << robot.getTh()<<endl;
// robot.unlock();
// break;
// }
// if (start.mSecSince() > 5000)
// {
// printf(" Turn timed out\n");
//
// cout << " current heading: " << " " << robot.getTh()<<endl;
// robot.unlock();
// break;
// }
// robot.unlock();
// ArUtil::sleep(10);
//}
}
/*****************************************************************
** Robot Search Subroutine
******************************************************************/
void S_RobotMotion( ArServerClient *serverclient, ArNetPacket *socket)
{
G_PTZHandler->reset();
ArUtil::sleep(500);
G_PTZHandler->tiltRel(-10);
double robotHeading=0;
double robotDstX = robot.getPose().getX();
double robotDstY = robot.getPose().getY();
//---------Generate the next motion by random numbers------------
cout << "-------- Generate the next motion by random numbers --------" <<endl;
srand( time( NULL ) );
switch(rand()%4)
{
case 0: //¡û
robotDstY += 1000;
robotHeading = 90;
break;
case 1: //¡ü
robotDstX += 1000;
robotHeading = 0;
break;
case 2: //¡ú
robotDstY -= 1000;
robotHeading = -90;
break;
case 3: //¡ý
robotDstX -= 1000;
robotHeading = 180;
break;
}
G_PathPlanning->pathPlanToPose(ArPose(robotDstX, robotDstY, robotHeading), true,true);
cout << "RobotMotion is processing..." <<endl;
while(G_PathPlanning->getState() != ArPathPlanningTask::REACHED_GOAL )
{
if (G_PathPlanning->getState() == ArPathPlanningTask::ABORTED_PATHPLAN) { G_PathPlanning->cancelPathPlan();break;}
else if(G_PathPlanning->getState() == ArPathPlanningTask::FAILED_PLAN) {G_PathPlanning->pathPlanToPose(ArPose(-300,-100,0),true,true);}
}
serverclient->sendPacketTcp(socket);
//-------------------------------------------------------------------------------------------------------
}
void showMenu(){
ArLog::log(ArLog::Normal ,"Posicion actual robot:\n");
robot->getPose().log();
cout << "Press the key for your option:" << endl << endl;
cout << " flecha arriba : avanzar" << endl;
cout << " flecha abajo : retroceder" << endl;
cout << " flecha izq / drch : girar" << endl;
cout << " p : start" << endl;
cout << " s : stop" << endl;
cout << " t : test parado" << endl;
cout << " w : guardar trayectoria" << endl;
cout << " g : guardar Medidas" << endl;
cout << " c : guardar Medidas continuamente" << endl;
cout << " x : Quit" << endl;
}
int main(int argc, char **argv)
{
std::string str;
int ret;
int dist;
ArTime start;
ArPose startPose;
bool vel2 = false;
// connection to the robot
ArSerialConnection con;
// the robot
ArRobot robot;
// the connection handler from above
ConnHandler ch(&robot);
// init area with a dedicated signal handling thread
Aria::init(Aria::SIGHANDLE_THREAD);
if (argc != 2 || (dist = atoi(argv[1])) == 0)
{
printf("Usage: %s <distInMM>\n", argv[0]);
exit(0);
}
if (dist < 1000)
{
printf("You must go at least a meter\n");
exit(0);
}
// open the connection with the defaults, exit if failed
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
// set the robots connection
robot.setDeviceConnection(&con);
// try to connect, if we fail, the connection handler should bail
if (!robot.blockingConnect())
{
// this should have been taken care of by the connection handler
// but just in case
printf(
"asyncConnect failed because robot is not running in its own thread.\n");
Aria::shutdown();
return 1;
}
// run the robot in its own thread, so it gets and processes packets and such
robot.runAsync(false);
// just a big long set of printfs, direct motion commands and sleeps,
// it should be self-explanatory
robot.lock();
/*
robot.setAbsoluteMaxTransVel(2000);
robot.setTransVelMax(2000);
robot.setTransAccel(1000);
robot.setTransDecel(1000);
robot.comInt(82, 30); // rotkp
robot.comInt(83, 200); // rotkv
robot.comInt(84, 0); // rotki
robot.comInt(85, 30); // transkp
robot.comInt(86, 450); // transkv
robot.comInt(87, 4); // transki
*/
printf("Driving %d mm (going full speed for that far minus a meter then stopping)\n", dist);
if (vel2)
robot.setVel2(2200, 2200);
else
robot.setVel(2200);
robot.unlock();
start.setToNow();
startPose = robot.getPose();
while (1)
{
robot.lock();
printf("\r vel: %.0f x: %.0f y: %.0f: dist: %.0f heading: %.2f",
robot.getVel(), robot.getX(), robot.getY(),
startPose.findDistanceTo(robot.getPose()),
robot.getTh());
if (startPose.findDistanceTo(robot.getPose()) > abs(dist) - 1000)
{
printf("\nFinished distance\n");
robot.setVel(0);
robot.unlock();
break;
}
if (start.mSecSince() > 10000)
{
printf("\nDistance timed out\n");
robot.setVel(0);
robot.unlock();
break;
}
robot.unlock();
ArUtil::sleep(50);
}
if (vel2)
robot.setVel2(0, 0);
else
robot.setVel(0);
start.setToNow();
while (1)
{
robot.lock();
if (vel2)
robot.setVel2(0, 0);
else
robot.setVel(0);
if (fabs(robot.getVel()) < 20)
{
printf("Stopped\n");
robot.unlock();
break;
}
if (start.mSecSince() > 2000)
{
printf("\nStop timed out\n");
robot.unlock();
break;
}
robot.unlock();
ArUtil::sleep(50);
}
robot.lock();
robot.disconnect();
robot.unlock();
// shutdown and ge tout
Aria::shutdown();
return 0;
}
void RosAriaNode::Mas1ToSla_cb( const geometry_msgs::PointStampedConstPtr &msg)
{
// Master 1 Position
Vm1 = msg->point.x;
Xm1 = Xm1 + Vm1;
// Master force
Fk1 = msg->point.y;
// Master 1 Positive Energy
mst1_slv_cmd_P = msg->point.z;
Xsd = Scale *(alpha*Xm1 + (1-alpha)*Xm2);// design position
Xsprv = Xs;
Position = robot->getPose();
Xs = Position.getX();
delta = Xs - Xsprv;
Vs = PosController.compute(Xsd,Xs);
// Fs - Sum
Fs = K_force*(Xsd - Xs);
Fs1 = alpha*Fs;
Fs2 = (1-alpha)*Fs;
/*
* Master 1 - Slave Channel
*/
// Calculate Negative Energy and dissipate Active energy
if (Vm1*Fs1>0)
{
mst1_slv_cmd_N -=Vm1*Fs1;
}
else
{
//Do nothing
}
// PC:
if (mst1_slv_cmd_N+mst1_slv_cmd_P<0)
{
mst1_slv_cmd_N +=Vm1*Fs1; // backward 1 step
Xm1 = Xm1 - Vm1; // backward 1 step
// Modify Vm1
if (Fs1*Fs1>0)
Vm1 = (mst1_slv_cmd_N+mst1_slv_cmd_P)/Fs1;
else
Vm1 = 0;
//Update
Xm1 = Xm1 + Vm1;
Xsd = Scale *(alpha*Xm1 + (1-alpha)*Xm2);// design position
Vs = PosController.compute(Xsd,Xs);
// Modify Fs ????
mst1_slv_cmd_N -=Vm1*Fs1;
}
/*
* Slave - Master 1 Channel
*/
// Calculate Positive Energy
if (Fk1*Vs>0)
{
//sla_mst1_cmd_P += Fk1*Vs;
sla_mst1_cmd_P += Fk1*delta;
}
else
{
//Do nothing
}
/*
* Master 2 - Slave Channel
*/
// Calculate Negative Energy and dissipate Active energy
if (Vm2*Fs2>0)
{
mst2_slv_cmd_N -=Vm2*Fs2;
}
else
{
//Do nothing
}
// PC:
if (mst2_slv_cmd_N+mst2_slv_cmd_P<0)
{
mst2_slv_cmd_N +=Vm2*Fs2; // backward 1 step
Xm2 = Xm2 - Vm2; // backward 1 step
// Modify Vm1
if (Fs2*Fs2>0)
Vm2 = (mst2_slv_cmd_N+mst2_slv_cmd_P)/Fs2;
else
Vm2 = 0;
//Update
Xm2 = Xm2 + Vm2;
Xsd = Scale *(alpha*Xm1 + (1-alpha)*Xm2);// design position
Vs = PosController.compute(Xsd,Xs);
// Modify Fs ????
mst2_slv_cmd_N -=Vm2*Fs2;
}
/*
* Slave - Master 2 Channel
*/
// Calculate Positive Energy
if (Fk2*Vs>0)
{
sla_mst2_cmd_P += Fk2*Vs;
}
else
{
//Do nothing
}
//Saturation
if (Vs>MaxVel) Vs = MaxVel;
if (Vs< - MaxVel) Vs = -MaxVel;
//ROS_INFO("Velocity: %5f",Vs);
//ROS_INFO("Ref - Real - Vel : %5f -- %5f --%5f",Xsd,Xs,Vs);
ROS_INFO("Position: %5f - %5f",Xs,Xsd);
robot->setVel(Vs);
// Publisher
SlaToMas1.point.x = Fs1;
SlaToMas1.point.y = delta;
SlaToMas1.point.z = sla_mst1_cmd_P;
SlaToMas1_Pub.publish(SlaToMas1);
SlaToMas2.point.x = Fs2;
SlaToMas2.point.y = Vs;
SlaToMas2.point.z = sla_mst2_cmd_P;
SlaToMas2_Pub.publish(SlaToMas2);
}
void TakeBlockToWall::handler(void)
{
Color tempColor;
switch (myState)
{
case STATE_START:
setState(STATE_ACQUIRE_BLOCK);
myDropWall = COLOR_FIRST_WALL;
myLapWall = COLOR_SECOND_WALL;
printf("!! Started state handling!\n");
//handler();
return;
break;
case STATE_ACQUIRE_BLOCK:
if (myNewState)
{
printf("!! Acquire block\n");
myNewState = false;
myAMPTU->panTilt(0, -40);
myAcquire->activate();
myAcquire->setChannel(COLOR_BLOCK);
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myGripper->getGripState() == 2 &&
myGripper->getBreakBeamState() != 0)
{
printf("###### AcquireBlock: Successful (have cube?)\n");
setState(STATE_PICKUP_BACKUP);
//handler();
return;
}
else if (myGripper->getBreakBeamState() != 0)
{
printf("###### AcquireBlock: Successful (cube in gripper?)\n");
setState(STATE_PICKUP_BLOCK);
//handler();
return;
}
if (myAcquire->getState() == Acquire::STATE_FAILED ||
myStateStartTime.mSecSince() > 35000)
{
printf("###### AcqiureBlock: failed\n");
setState(STATE_BACKUP);
//handler();
return;
}
else if (myAcquire->getState() == Acquire::STATE_SUCCEEDED)
{
printf("###### AcquireBlock: successful\n");
setState(STATE_PICKUP_BLOCK);
//handler();
return;
}
break;
case STATE_PICKUP_BLOCK:
if (myNewState)
{
printf("!! Pickup block\n");
myNewState = false;
myAMPTU->panTilt(0, -35);
myAcquire->deactivate();
myPickUp->activate();
myPickUp->setChannel(COLOR_BLOCK);
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myPickUp->getState() == PickUp::STATE_FAILED)
{
printf("###### PickUpBlock: failed\n");
setState(STATE_BACKUP);
//handler();
return;
}
else if (myPickUp->getState() == PickUp::STATE_SUCCEEDED)
{
printf("###### PickUpBlock: successful\n");
setState(STATE_PICKUP_BACKUP);
//handler();
return;
}
break;
case STATE_BACKUP:
if (myNewState)
{
myNewState = false;
myRobot->move(BACKUP_DIST * .75);
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myRobot->isLeftMotorStalled() || myRobot->isRightMotorStalled())
{
printf("###### Backup: Failed, going forwards\n");
myRobot->clearDirectMotion();
setState(STATE_FORWARD);
}
if (myStateStartTime.mSecSince() > BACKUP_TIME ||
myStateStartPos.findDistanceTo(myRobot->getPose()) > BACKUP_DIST * .95 * .75)
{
printf("###### Backup: Succeeded\n");
myRobot->clearDirectMotion();
setState(STATE_ACQUIRE_BLOCK2);
//handler();
return;
}
break;
case STATE_FORWARD:
if (myNewState)
{
myNewState = false;
myRobot->move(-BACKUP_DIST * .75);
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myRobot->isLeftMotorStalled() || myRobot->isRightMotorStalled())
{
printf("###### Forward: Failed\n");
myRobot->clearDirectMotion();
setState(STATE_FAILED);
}
if (myStateStartTime.mSecSince() > BACKUP_TIME ||
myStateStartPos.findDistanceTo(myRobot->getPose()) >
ArMath::fabs(BACKUP_DIST * .95 * .75))
{
printf("###### Forward: Succeeded\n");
myRobot->clearDirectMotion();
setState(STATE_ACQUIRE_BLOCK2);
//handler();
return;
}
break;
case STATE_ACQUIRE_BLOCK2:
if (myNewState)
{
printf("!! Acquire block 2\n");
myNewState = false;
myAMPTU->panTilt(0, -40);
myAcquire->activate();
myAcquire->setChannel(COLOR_BLOCK);
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myGripper->getGripState() == 2 &&
myGripper->getBreakBeamState() != 0)
{
printf("###### AcquireBlock2: Successful (have cube?)\n");
setState(STATE_PICKUP_BACKUP);
//handler();
return;
}
else if (myGripper->getBreakBeamState() != 0)
{
printf("###### AcquireBlock2: Successful (cube in gripper?)\n");
setState(STATE_PICKUP_BLOCK2);
//handler();
return;
}
if (myAcquire->getState() == Acquire::STATE_FAILED ||
myStateStartTime.mSecSince() > 35000)
{
printf("###### AcqiureBlock2: failed\n");
setState(STATE_FAILED);
//handler();
return;
}
else if (myAcquire->getState() == Acquire::STATE_SUCCEEDED)
{
printf("###### AcquireBlock2: successful\n");
setState(STATE_PICKUP_BLOCK2);
//handler();
return;
}
break;
case STATE_PICKUP_BLOCK2:
if (myNewState)
{
printf("!! Pickup block 2\n");
myNewState = false;
myAcquire->deactivate();
myPickUp->activate();
myAMPTU->panTilt(0, -55);
myPickUp->setChannel(COLOR_BLOCK);
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myPickUp->getState() == PickUp::STATE_FAILED)
{
printf("###### PickUpBlock2: failed\n");
setState(STATE_FAILED);
//handler();
return;
}
else if (myPickUp->getState() == PickUp::STATE_SUCCEEDED)
{
printf("###### PickUpBlock2: successful\n");
setState(STATE_PICKUP_BACKUP);
//handler();
return;
}
break;
case STATE_PICKUP_BACKUP:
if (myNewState)
{
myNewState = false;
myRobot->move(BACKUP_DIST);
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myStateStartTime.mSecSince() > BACKUP_TIME ||
myStateStartPos.findDistanceTo(myRobot->getPose()) >
ArMath::fabs(BACKUP_DIST * .95))
{
printf("###### PickUp_BackUp: done\n");
myRobot->clearDirectMotion();
setState(STATE_ACQUIRE_DROP_WALL);
//handler();
return;
}
break;
case STATE_ACQUIRE_DROP_WALL:
if (myNewState)
{
printf("!! Acquire Drop wall, channel %d\n", myDropWall);
myNewState = false;
myAMPTU->panTilt(0, -30);
myAcquire->activate();
myAcquire->setChannel(myDropWall);
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myGripper->getGripState() != 2 ||
myGripper->getBreakBeamState() == 0)
{
printf("###### AcquireDropWall:: failed (lost cube %d %d)\n",
myGripper->getGripState(), myGripper->getBreakBeamState());
setState(STATE_BACKUP);
//handler();
return;
}
if (myAcquire->getState() == Acquire::STATE_FAILED ||
myStateStartTime.mSecSince() > 35000)
{
printf("###### AcquireDropWall:: failed\n");
setState(STATE_FAILED);
//handler();
return;
}
else if (myAcquire->getState() == Acquire::STATE_SUCCEEDED)
{
printf("###### AcquireDropWall: successful\n");
setState(STATE_DRIVETO_DROP_WALL);
//handler();
return;
}
break;
case STATE_DRIVETO_DROP_WALL:
if (myNewState)
{
printf("!! DropOff Drop wall, channel %d\n", myDropWall);
myNewState = false;
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->activate();
myDropOff->setChannel(myDropWall);
myTableLimiter->deactivate();
}
if (myDropOff->getState() == DropOff::STATE_FAILED)
{
printf("###### DropOffDropWall: failed\n");
setState(STATE_FAILED);
//handler();
return;
}
else if (myDropOff->getState() == DropOff::STATE_SUCCEEDED)
{
printf("###### DropOffDropWall: succesful\n");
setState(STATE_DROP_BACKUP);
//handler();
return;
}
break;
case STATE_DROP_BACKUP:
if (myNewState)
{
myNewState = false;
myRobot->move(BACKUP_DIST);
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myStateStartTime.mSecSince() > BACKUP_TIME ||
myStateStartPos.findDistanceTo(myRobot->getPose()) >
ArMath::fabs(BACKUP_DIST * .95))
{
printf("###### Drop_Backup: done\n");
myRobot->clearDirectMotion();
setState(STATE_ACQUIRE_LAP_WALL);
//handler();
return;
}
break;
case STATE_ACQUIRE_LAP_WALL:
if (myNewState)
{
printf("!! Acquire Lap wall, channel %d\n", myLapWall);
myNewState = false;
myAMPTU->panTilt(0, -30);
myAcquire->activate();
myAcquire->setChannel(myLapWall);
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->activate();
}
if (myAcquire->getState() == Acquire::STATE_FAILED ||
myStateStartTime.mSecSince() > 35000)
{
printf("###### AcquireLapWall:: failed\n");
setState(STATE_SWITCH);
//handler();
return;
}
else if (myAcquire->getState() == Acquire::STATE_SUCCEEDED)
{
printf("###### AcquireLapWall: successful\n");
setState(STATE_DRIVETO_LAP_WALL);
//handler();
return;
}
break;
case STATE_DRIVETO_LAP_WALL:
if (myNewState)
{
printf("!! Driveto Lap wall, channel %d\n", myLapWall);
myNewState = false;
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->activate();
myDriveTo->setChannel(myLapWall);
myDropOff->deactivate();
myTableLimiter->activate();
}
if (myDriveTo->getState() == DriveTo::STATE_FAILED)
{
printf("###### DriveToLapWall: failed\n");
setState(STATE_BACKUP_LAP_WALL);
//handler();
return;
}
else if (myDriveTo->getState() == DriveTo::STATE_SUCCEEDED)
{
printf("###### DriveToLapWall: succesful\n");
setState(STATE_BACKUP_LAP_WALL);
//handler();
return;
}
break;
case STATE_BACKUP_LAP_WALL:
if (myNewState)
{
myNewState = false;
myRobot->move(BACKUP_DIST * .75);
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myRobot->isLeftMotorStalled() || myRobot->isRightMotorStalled())
{
printf("###### BackupLapWall: Failed, going forwards\n");
myRobot->clearDirectMotion();
setState(STATE_FORWARD_LAP_WALL);
}
if (myStateStartTime.mSecSince() > BACKUP_TIME ||
myStateStartPos.findDistanceTo(myRobot->getPose()) >
ArMath::fabs(BACKUP_DIST * .95 * .75))
{
printf("###### BackupLapWall: Succeeded\n");
myRobot->clearDirectMotion();
setState(STATE_SWITCH);
//handler();
return;
}
break;
case STATE_FORWARD_LAP_WALL:
if (myNewState)
{
myNewState = false;
myRobot->move(-BACKUP_DIST * .75);
myAcquire->deactivate();
myPickUp->deactivate();
myDriveTo->deactivate();
myDropOff->deactivate();
myTableLimiter->deactivate();
}
if (myRobot->isLeftMotorStalled() || myRobot->isRightMotorStalled())
{
printf("###### ForwardLapWall: Failed\n");
myRobot->clearDirectMotion();
setState(STATE_FAILED);
}
if (myStateStartTime.mSecSince() > BACKUP_TIME ||
myStateStartPos.findDistanceTo(myRobot->getPose()) >
ArMath::fabs(BACKUP_DIST * .95 * .75))
{
printf("###### ForwardLapWall: Succeeded\n");
myRobot->clearDirectMotion();
setState(STATE_SWITCH);
//handler();
return;
}
break;
case STATE_SWITCH:
printf("!! Switching walls around.\n");
tempColor = myDropWall;
myDropWall = myLapWall;
myLapWall = tempColor;
setState(STATE_ACQUIRE_BLOCK);
//handler();
return;
case STATE_FAILED:
printf("@@@@@ Failed to complete the task!\n");
myRobot->comInt(ArCommands::SONAR, 0);
ArUtil::sleep(50);
myRobot->comStr(ArCommands::SAY, "\52\77\37\62\42\70");
ArUtil::sleep(500);
Aria::shutdown();
myRobot->disconnect();
myRobot->stopRunning();
return;
}
}
void S_TargetApproach( ArServerClient *serverclient, ArNetPacket *socket)
{
//Important: to halt current movement of camera, making the reading curret.
G_PTZHandler->haltPanTilt();
cout << "The last step: TargetApproach!" <<endl;
//G_PathPlanning->setCollisionRange(1000);
//G_PathPlanning->setFrontClearance(40);
//G_PathPlanning->setGoalDistanceTolerance(2500);
double camAngle = -1 * G_PTZHandler->getPan();
double robotHeading = robot.getPose().getTh();
double robotCurrentX = robot.getPose().getX() ;
double robotCurrentY = robot.getPose().getY();
double angle = 0.0;
double distance =0.0;
double targetX, targetY;
int disThreshold = 500;
//test mode
// G_PTZHandler->panRel(-30);
//G_PathPlanning->setFrontClearance(40);
//G_PathPlanning->setObsThreshold(1);
cout << "--------------Path Planning Information--------------------" <<endl;
cout << "SafeCollisionRange = " << G_PathPlanning->getSafeCollisionRange() << endl;
cout << "FrontClearance = " << G_PathPlanning->getFrontClearance() << endl
<< "GoalDistanceTolerance = " << G_PathPlanning->getGoalDistanceTolerance() << endl
<< "setGoalOccupiedFailDistance = " << G_PathPlanning->getGoalOccupiedFailDistance() << endl
<< "getObsThreshold = " << G_PathPlanning->getObsThreshold() <<endl
<< "getLocalPathFailDistance = " << G_PathPlanning->getLocalPathFailDistance() << endl;
//getCurrentGoal
//--------------- Set up the laser range device to read the distance from the target -----------------------------
// for(int i =0; i< 20;i++)
//sick.currentReadingPolar(robotHeading+ camAngle -2.5, robotHeading+ camAngle +2.5, &angle);
//Begin:
sick.lockDevice();
//if (distance == 0 || distance>disThreshold)
distance = sick.currentReadingPolar(/*robotHeading+*/ camAngle -2.5, /*robotHeading+*/ camAngle +2.5, &angle)-disThreshold;
//double distance = sick.currentReadingPolar(89, 90, &angle);
cout << "The closest reading is " << distance << " at " << angle << " degree , " << "disThreshold : " <<disThreshold << " " << robotHeading << " " << camAngle<< endl;
sick.unlockDevice();
//----------------------------------------------------------------------------------------------------------------
//basic_turn(camAngle);
cout << "Camera Angle is " << camAngle << endl;
cout << "before calculation, check originalX, originalY " << robotCurrentX << " " << robotCurrentY << " robotHeading is " << robotHeading << endl<<endl;
coordinateCalculation(robotCurrentX,robotCurrentY,&targetX,&targetY,camAngle,robotHeading,distance);
//
//cout << "before movement, check targetX, target Y" << targetX << " " << targetY << "robotHeading is "<< robotHeading << endl << endl;
cout << "targetX : " <<targetX << " targetY" <<targetY;
G_PathPlanning->pathPlanToPose(ArPose(targetX,targetY,camAngle),true,true);
cout << "RobotMotion is processing..." <<endl;
G_PTZHandler->reset();
ArUtil::sleep(200);
G_PTZHandler->tiltRel(-10);
while(G_PathPlanning->getState() != ArPathPlanningTask::REACHED_GOAL )
{
if (G_PathPlanning->getState() == ArPathPlanningTask::FAILED_MOVE)
{
G_PathPlanning->cancelPathPlan();cout << "x " << robot.getPose().getX()<< " y " <<robot.getPose().getY() <<endl; break;
}
else if(G_PathPlanning->getState() == ArPathPlanningTask::FAILED_PLAN)
{
// getchar();
//getchar();
//getchar();
// getchar();
// disThreshold+=50;
//
// goto Begin;
}
}
//serverclient->sendPacketTcp(socket);
ArUtil::sleep(3000);
cout << "RobotMotion is heading home..." <<endl;
G_PathPlanning->pathPlanToPose(ArPose(0,0,0),true,true);
while(G_PathPlanning->getState() != ArPathPlanningTask::REACHED_GOAL )
{
//cout << G_PathPlanning->getState() <<endl;
if (G_PathPlanning->getState() == ArPathPlanningTask::FAILED_MOVE)
{
G_PathPlanning->cancelPathPlan(); break;
}
// //else if(G_PathPlanning->getState() == ArPathPlanningTask::FAILED_PLAN)
// // {G_PathPlanning->pathPlanToPose(ArPose(-300,30,0),true,true);}
}
}
void RosAriaNode::publish()
{
// Note, this is called via SensorInterpTask callback (myPublishCB, named "ROSPublishingTask"). ArRobot object 'robot' sholud not be locked or unlocked.
pos = robot->getPose();
tf::poseTFToMsg(tf::Transform(tf::createQuaternionFromYaw(pos.getTh()*M_PI/180), tf::Vector3(pos.getX()/1000,
pos.getY()/1000, 0)), position.pose.pose); //Aria returns pose in mm.
position.twist.twist.linear.x = robot->getVel()/1000; //Aria returns velocity in mm/s.
position.twist.twist.linear.y = robot->getLatVel()/1000.0;
position.twist.twist.angular.z = robot->getRotVel()*M_PI/180;
position.header.frame_id = frame_id_odom;
position.child_frame_id = frame_id_base_link;
position.header.stamp = ros::Time::now();
pose_pub.publish(position);
ROS_DEBUG("RosAria: publish: (time %f) pose x: %f, y: %f, angle: %f; linear vel x: %f, y: %f; angular vel z: %f",
position.header.stamp.toSec(),
(double)position.pose.pose.position.x,
(double)position.pose.pose.position.y,
(double)position.pose.pose.orientation.w,
(double) position.twist.twist.linear.x,
(double) position.twist.twist.linear.y,
(double) position.twist.twist.angular.z
);
// publishing transform odom->base_link
odom_trans.header.stamp = ros::Time::now();
odom_trans.header.frame_id = frame_id_odom;
odom_trans.child_frame_id = frame_id_base_link;
odom_trans.transform.translation.x = pos.getX()/1000;
odom_trans.transform.translation.y = pos.getY()/1000;
odom_trans.transform.translation.z = 0.0;
odom_trans.transform.rotation = tf::createQuaternionMsgFromYaw(pos.getTh()*M_PI/180);
odom_broadcaster.sendTransform(odom_trans);
// getStallValue returns 2 bytes with stall bit and bumper bits, packed as (00 00 FrontBumpers RearBumpers)
int stall = robot->getStallValue();
unsigned char front_bumpers = (unsigned char)(stall >> 8);
unsigned char rear_bumpers = (unsigned char)(stall);
bumpers.header.frame_id = frame_id_bumper;
bumpers.header.stamp = ros::Time::now();
std::stringstream bumper_info(std::stringstream::out);
// Bit 0 is for stall, next bits are for bumpers (leftmost is LSB)
for (unsigned int i=0; i<robot->getNumFrontBumpers(); i++)
{
bumpers.front_bumpers[i] = (front_bumpers & (1 << (i+1))) == 0 ? 0 : 1;
bumper_info << " " << (front_bumpers & (1 << (i+1)));
}
ROS_DEBUG("RosAria: Front bumpers:%s", bumper_info.str().c_str());
bumper_info.str("");
// Rear bumpers have reverse order (rightmost is LSB)
unsigned int numRearBumpers = robot->getNumRearBumpers();
for (unsigned int i=0; i<numRearBumpers; i++)
{
bumpers.rear_bumpers[i] = (rear_bumpers & (1 << (numRearBumpers-i))) == 0 ? 0 : 1;
bumper_info << " " << (rear_bumpers & (1 << (numRearBumpers-i)));
}
ROS_DEBUG("RosAria: Rear bumpers:%s", bumper_info.str().c_str());
bumpers_pub.publish(bumpers);
//Publish battery information
// TODO: Decide if BatteryVoltageNow (normalized to (0,12)V) is a better option
std_msgs::Float64 batteryVoltage;
batteryVoltage.data = robot->getRealBatteryVoltageNow();
voltage_pub.publish(batteryVoltage);
if(robot->haveStateOfCharge())
{
std_msgs::Float32 soc;
soc.data = robot->getStateOfCharge()/100.0;
state_of_charge_pub.publish(soc);
}
// publish recharge state if changed
char s = robot->getChargeState();
if(s != recharge_state.data)
{
ROS_INFO("RosAria: publishing new recharge state %d.", s);
recharge_state.data = s;
recharge_state_pub.publish(recharge_state);
}
// publish motors state if changed
bool e = robot->areMotorsEnabled();
if(e != motors_state.data || !published_motors_state)
{
ROS_INFO("RosAria: publishing new motors state %d.", e);
motors_state.data = e;
motors_state_pub.publish(motors_state);
published_motors_state = true;
}
// Publish sonar information, if enabled.
if (use_sonar) {
sensor_msgs::PointCloud cloud; //sonar readings.
cloud.header.stamp = position.header.stamp; //copy time.
// sonar sensors relative to base_link
cloud.header.frame_id = frame_id_sonar;
// Log debugging info
std::stringstream sonar_debug_info;
sonar_debug_info << "Sonar readings: ";
for (int i = 0; i < robot->getNumSonar(); i++) {
ArSensorReading* reading = NULL;
reading = robot->getSonarReading(i);
if(!reading) {
ROS_WARN("RosAria: Did not receive a sonar reading.");
continue;
}
// getRange() will return an integer between 0 and 5000 (5m)
sonar_debug_info << reading->getRange() << " ";
// local (x,y). Appears to be from the centre of the robot, since values may
// exceed 5000. This is good, since it means we only need 1 transform.
// x & y seem to be swapped though, i.e. if the robot is driving north
// x is north/south and y is east/west.
//
//ArPose sensor = reading->getSensorPosition(); //position of sensor.
// sonar_debug_info << "(" << reading->getLocalX()
// << ", " << reading->getLocalY()
// << ") from (" << sensor.getX() << ", "
// << sensor.getY() << ") ;; " ;
//add sonar readings (robot-local coordinate frame) to cloud
geometry_msgs::Point32 p;
p.x = reading->getLocalX() / 1000.0;
p.y = reading->getLocalY() / 1000.0;
p.z = 0.0;
cloud.points.push_back(p);
}
ROS_DEBUG_STREAM(sonar_debug_info.str());
sonar_pub.publish(cloud);
}
}
int main(int argc, char **argv)
{
// Initialize Aria and Arnl global information
Aria::init();
Arnl::init();
// The robot object
ArRobot robot;
// Parse the command line arguments.
ArArgumentParser parser(&argc, argv);
// Set up our simpleConnector, to connect to the robot and laser
//ArSimpleConnector simpleConnector(&parser);
ArRobotConnector robotConnector(&parser, &robot);
// Connect to the robot
if (!robotConnector.connectRobot())
{
ArLog::log(ArLog::Normal, "Error: Could not connect to robot... exiting");
Aria::exit(3);
}
// Set up where we'll look for files. Arnl::init() set Aria's default
// directory to Arnl's default directory; addDirectories() appends this
// "examples" directory.
char fileDir[1024];
ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(),
"examples");
// To direct log messages to a file, or to change the log level, use these calls:
//ArLog::init(ArLog::File, ArLog::Normal, "log.txt", true, true);
//ArLog::init(ArLog::File, ArLog::Verbose);
// Add a section to the configuration to change ArLog parameters
ArLog::addToConfig(Aria::getConfig());
// set up a gyro (if the robot is older and its firmware does not
// automatically incorporate gyro corrections, then this object will do it)
ArAnalogGyro gyro(&robot);
// Our networking server
ArServerBase server;
// Set up our simpleOpener, used to set up the networking server
ArServerSimpleOpener simpleOpener(&parser);
// the laser connector
ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
// Tell the laser connector to always connect the first laser since
// this program always requires a laser.
parser.addDefaultArgument("-connectLaser");
// Load default arguments for this computer (from /etc/Aria.args, environment
// variables, and other places)
parser.loadDefaultArguments();
// Parse arguments
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
logOptions(argv[0]);
Aria::exit(1);
}
// This causes Aria::exit(9) to be called if the robot unexpectedly
// disconnects
ArGlobalFunctor1<int> shutdownFunctor(&Aria::exit, 9);
robot.addDisconnectOnErrorCB(&shutdownFunctor);
// Create an ArSonarDevice object (ArRangeDevice subclass) and
// connect it to the robot.
ArSonarDevice sonarDev;
robot.addRangeDevice(&sonarDev);
// This object will allow robot's movement parameters to be changed through
// a Robot Configuration section in the ArConfig global configuration facility.
ArRobotConfig robotConfig(&robot);
// Include gyro configuration options in the robot configuration section.
robotConfig.addAnalogGyro(&gyro);
// Start the robot thread.
robot.runAsync(true);
// connect the laser(s) if it was requested, this adds them to the
// robot too, and starts them running in their own threads
if (!laserConnector.connectLasers())
{
ArLog::log(ArLog::Normal, "Could not connect to all lasers... exiting\n");
Aria::exit(2);
}
// find the laser we should use for localization and/or mapping,
// which will be the first laser
robot.lock();
ArLaser *firstLaser = robot.findLaser(1);
if (firstLaser == NULL || !firstLaser->isConnected())
{
ArLog::log(ArLog::Normal, "Did not have laser 1 or it is not connected, cannot start localization and/or mapping... exiting");
Aria::exit(2);
}
robot.unlock();
/* Create and set up map object */
// Set up the map object, this will look for files in the examples
// directory (unless the file name starts with a /, \, or .
// You can take out the 'fileDir' argument to look in the program's current directory
// instead.
// When a configuration file is loaded into ArConfig later, if it specifies a
// map file, then that file will be loaded as the map.
ArMap map(fileDir);
// set it up to ignore empty file names (otherwise if a configuration omits
// the map file, the whole configuration change will fail)
map.setIgnoreEmptyFileName(true);
// ignore the case, so that if someone is using MobileEyes or
// MobilePlanner from Windows and changes the case on a map name,
// it will still work.
map.setIgnoreCase(true);
/* Create localization and path planning threads */
ArPathPlanningTask pathTask(&robot, &sonarDev, &map);
ArLog::log(ArLog::Normal, "Creating laser localization task");
// Laser Monte-Carlo Localization
ArLocalizationTask locTask(&robot, firstLaser, &map);
// Set some options on each laser that the laser connector
// connected to.
std::map<int, ArLaser *>::iterator laserIt;
for (laserIt = robot.getLaserMap()->begin();
laserIt != robot.getLaserMap()->end();
laserIt++)
{
int laserNum = (*laserIt).first;
ArLaser *laser = (*laserIt).second;
// Skip lasers that aren't connected
if(!laser->isConnected())
continue;
// add the disconnectOnError CB to shut things down if the laser
// connection is lost
laser->addDisconnectOnErrorCB(&shutdownFunctor);
// set the number of cumulative readings the laser will take
laser->setCumulativeBufferSize(200);
// add the lasers to the path planning task
pathTask.addRangeDevice(laser, ArPathPlanningTask::BOTH);
// set the cumulative clean offset (so that they don't all fire at once)
laser->setCumulativeCleanOffset(laserNum * 100);
// reset the cumulative clean time (to make the new offset take effect)
laser->resetLastCumulativeCleanTime();
// Add the packet count to the Aria info strings (It will be included in
// MobileEyes custom details so you can monitor whether the laser data is
// being received correctly)
std::string laserPacketCountName;
laserPacketCountName = laser->getName();
laserPacketCountName += " Packet Count";
Aria::getInfoGroup()->addStringInt(
laserPacketCountName.c_str(), 10,
new ArRetFunctorC<int, ArLaser>(laser,
&ArLaser::getReadingCount));
}
// Used for optional multirobot features (see below) (TODO move to multirobot
// example?)
ArClientSwitchManager clientSwitch(&server, &parser);
/* Start the server */
// Open the networking server
if (!simpleOpener.open(&server, fileDir, 240))
{
ArLog::log(ArLog::Normal, "Error: Could not open server.");
exit(2);
}
/* Create various services that provide network access to clients (such as
* MobileEyes), as well as add various additional features to ARNL */
// ARNL can optionally get information about the positions of other robots from a
// "central server" (see central server example program), if command
// line options specifying the address of the central server was given.
// If there is no central server, then the address of each other robot
// can instead be given in the configuration, and the multirobot systems
// will connect to each robot (or "peer") individually.
// TODO move this to multirobot example?
bool usingCentralServer = false;
if(clientSwitch.getCentralServerHostName() != NULL)
usingCentralServer = true;
// if we're using the central server then we want to create the
// multiRobot central classes
if (usingCentralServer)
{
// Make the handler for multi robot information (this sends the
// information to the central server)
//ArServerHandlerMultiRobot *handlerMultiRobot =
new ArServerHandlerMultiRobot(&server, &robot,
&pathTask,
&locTask, &map);
// Normally each robot, and the central server, must all have
// the same map name for the central server to share robot
// information. (i.e. they are operating in the same space).
// This changes the map name that ArServerHandlerMutliRobot
// reports to the central server, in case you want this individual
// robot to load a different map file name, but still report
// the common map file to the central server.
//handlerMultiRobot->overrideMapName("central.map");
// the range device that gets the multi robot information from
// the central server and presents it as virtual range readings
// to ARNL
ArMultiRobotRangeDevice *multiRobotRangeDevice = new ArMultiRobotRangeDevice(&server);
robot.addRangeDevice(multiRobotRangeDevice);
pathTask.addRangeDevice(multiRobotRangeDevice,
ArPathPlanningTask::BOTH);
// Set up options for drawing multirobot information in MobileEyes.
multiRobotRangeDevice->setCurrentDrawingData(
new ArDrawingData("polyDots", ArColor(125, 125, 0),
100, 73, 1000), true);
multiRobotRangeDevice->setCumulativeDrawingData(
new ArDrawingData("polyDots", ArColor(125, 0, 125),
100, 72, 1000), true);
// This sets up the localization to use the known poses of other robots
// for its localization in cases where numerous robots crowd out the map.
locTask.setMultiRobotCallback(multiRobotRangeDevice->getOtherRobotsCB());
}
// if we're not using a central server then create the multirobot peer classes
else
{
// set the path planning so it uses the explicit collision range for how far its planning
pathTask.setUseCollisionRangeForPlanningFlag(true);
// make our thing that gathers information from the other servers
ArServerHandlerMultiRobotPeer *multiRobotPeer = NULL;
ArMultiRobotPeerRangeDevice *multiRobotPeerRangeDevice = NULL;
multiRobotPeerRangeDevice = new ArMultiRobotPeerRangeDevice(&map);
// make our thing that sends information to the other servers
multiRobotPeer = new ArServerHandlerMultiRobotPeer(&server, &robot,
&pathTask, &locTask);
// hook the two together so they both know what priority this robot is
multiRobotPeer->setNewPrecedenceCallback(
multiRobotPeerRangeDevice->getSetPrecedenceCallback());
// hook the two together so they both know what priority this
// robot's fingerprint is
multiRobotPeer->setNewFingerprintCallback(
multiRobotPeerRangeDevice->getSetFingerprintCallback());
// hook the two together so that the range device can call on the
// server handler to change its fingerprint
multiRobotPeerRangeDevice->setChangeFingerprintCB(
multiRobotPeer->getChangeFingerprintCB());
// then add the robot to the places it needs to be
robot.addRangeDevice(multiRobotPeerRangeDevice);
pathTask.addRangeDevice(multiRobotPeerRangeDevice,
ArPathPlanningTask::BOTH);
// Set the range device so that we can see the information its using
// to avoid, you can comment these out in order to not see them
multiRobotPeerRangeDevice->setCurrentDrawingData(
new ArDrawingData("polyDots", ArColor(125, 125, 0),
100, 72, 1000), true);
multiRobotPeerRangeDevice->setCumulativeDrawingData(
new ArDrawingData("polyDots", ArColor(125, 0, 125),
100, 72, 1000), true);
// This sets up the localization to use the known poses of other robots
// for its localization in cases where numerous robots crowd out the map.
locTask.setMultiRobotCallback(
multiRobotPeerRangeDevice->getOtherRobotsCB());
}
/* Add additional range devices to the robot and path planning task (so it
avoids obstacles detected by these devices) */
// Add IR range device to robot and path planning task (so it avoids obstacles
// detected by this device)
robot.lock();
ArIRs irs;
robot.addRangeDevice(&irs);
pathTask.addRangeDevice(&irs, ArPathPlanningTask::CURRENT);
// Add bumpers range device to robot and path planning task (so it avoids obstacles
// detected by this device)
ArBumpers bumpers;
robot.addRangeDevice(&bumpers);
pathTask.addRangeDevice(&bumpers, ArPathPlanningTask::CURRENT);
// Add range device which uses forbidden regions given in the map to give virtual
// range device readings to ARNL. (so it avoids obstacles
// detected by this device)
ArForbiddenRangeDevice forbidden(&map);
robot.addRangeDevice(&forbidden);
pathTask.addRangeDevice(&forbidden, ArPathPlanningTask::CURRENT);
robot.unlock();
// Action to slow down robot when localization score drops but not lost.
ArActionSlowDownWhenNotCertain actionSlowDown(&locTask);
pathTask.getPathPlanActionGroup()->addAction(&actionSlowDown, 140);
// Action to stop the robot when localization is "lost" (score too low)
ArActionLost actionLostPath(&locTask, &pathTask);
pathTask.getPathPlanActionGroup()->addAction(&actionLostPath, 150);
// Arnl uses this object when it must replan its path because its
// path is completely blocked. It will use an older history of sensor
// readings to replan this new path. This should not be used with SONARNL
// since sonar readings are not accurate enough and may prevent the robot
// from planning through space that is actually clear.
ArGlobalReplanningRangeDevice replanDev(&pathTask);
// Service to provide drawings of data in the map display :
ArServerInfoDrawings drawings(&server);
drawings.addRobotsRangeDevices(&robot);
drawings.addRangeDevice(&replanDev);
/* Draw a box around the local path planning area use this
(You can enable this particular drawing from custom commands
which is set up down below in ArServerInfoPath) */
ArDrawingData drawingDataP("polyLine", ArColor(200,200,200), 1, 75);
ArFunctor2C<ArPathPlanningTask, ArServerClient *, ArNetPacket *>
drawingFunctorP(&pathTask, &ArPathPlanningTask::drawSearchRectangle);
drawings.addDrawing(&drawingDataP, "Local Plan Area", &drawingFunctorP);
/* Show the sample points used by MCL */
ArDrawingData drawingDataL("polyDots", ArColor(0,255,0), 100, 75);
ArFunctor2C<ArLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorL(&locTask, &ArLocalizationTask::drawRangePoints);
drawings.addDrawing(&drawingDataL, "Localization Points", &drawingFunctorL);
// "Custom" commands. You can add your own custom commands here, they will
// be available in MobileEyes' custom commands (enable in the toolbar or
// access through Robot Tools)
ArServerHandlerCommands commands(&server);
// These provide various kinds of information to the client:
ArServerInfoRobot serverInfoRobot(&server, &robot);
ArServerInfoSensor serverInfoSensor(&server, &robot);
ArServerInfoPath serverInfoPath(&server, &robot, &pathTask);
serverInfoPath.addSearchRectangleDrawing(&drawings);
serverInfoPath.addControlCommands(&commands);
// Provides localization info and allows the client (MobileEyes) to relocalize at a given
// pose:
ArServerInfoLocalization serverInfoLocalization(&server, &robot, &locTask);
ArServerHandlerLocalization serverLocHandler(&server, &robot, &locTask);
// If you're using MobileSim, ArServerHandlerLocalization sends it a command
// to move the robot's true pose if you manually do a localization through
// MobileEyes. To disable that behavior, use this constructor call instead:
// ArServerHandlerLocalization serverLocHandler(&server, &robot, true, false);
// The fifth argument determines whether to send the command to MobileSim.
// Provide the map to the client (and related controls):
ArServerHandlerMap serverMap(&server, &map);
// These objects add some simple (custom) commands to 'commands' for testing and debugging:
ArServerSimpleComUC uCCommands(&commands, &robot); // Send any command to the microcontroller
ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // configure logging
ArServerSimpleComLogRobotConfig configCommands(&commands, &robot); // trigger logging of the robot config parameters
// ArServerSimpleServerCommands serverCommands(&commands, &server); // monitor networking behavior (track packets sent etc.)
// service that allows the client to monitor the communication link status
// between the robot and the client.
//
ArServerHandlerCommMonitor handlerCommMonitor(&server);
// service that allows client to change configuration parameters in ArConfig
ArServerHandlerConfig handlerConfig(&server, Aria::getConfig(),
Arnl::getTypicalDefaultParamFileName(),
Aria::getDirectory());
/* Set up the possible modes for remote control from a client such as
* MobileEyes:
*/
// Mode To go to a goal or other specific point:
ArServerModeGoto modeGoto(&server, &robot, &pathTask, &map,
locTask.getRobotHome(),
locTask.getRobotHomeCallback());
// Mode To stop and remain stopped:
ArServerModeStop modeStop(&server, &robot);
// Cause the sonar to turn off automatically
// when the robot is stopped, and turn it back on when commands to move
// are sent. (Note, if using SONARNL to localize, then don't do this
// since localization may get lost)
ArSonarAutoDisabler sonarAutoDisabler(&robot);
// Teleoperation modes To drive by keyboard, joystick, etc:
ArServerModeRatioDrive modeRatioDrive(&server, &robot);
// ArServerModeDrive modeDrive(&server, &robot); // Older mode for compatability
// Prevent normal teleoperation driving if localization is lost using
// a high-priority action, which enables itself when the particular mode is
// active.
// (You have to enter unsafe drive mode to drive when lost.)
ArActionLost actionLostRatioDrive(&locTask, &pathTask, &modeRatioDrive);
modeRatioDrive.getActionGroup()->addAction(&actionLostRatioDrive, 110);
// Add drive mode section to the configuration, and also some custom (simple) commands:
modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings");
modeRatioDrive.addControlCommands(&commands);
// Wander mode (also prevent wandering if lost):
ArServerModeWander modeWander(&server, &robot);
ArActionLost actionLostWander(&locTask, &pathTask, &modeWander);
modeWander.getActionGroup()->addAction(&actionLostWander, 110);
// This provides a small table of interesting information for the client
// to display to the operator. You can add your own callbacks to show any
// data you want.
ArServerInfoStrings stringInfo(&server);
Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
// Provide a set of informational data (turn on in MobileEyes with
// View->Custom Details)
Aria::getInfoGroup()->addStringInt(
"Motor Packet Count", 10,
new ArConstRetFunctorC<int, ArRobot>(&robot,
&ArRobot::getMotorPacCount));
Aria::getInfoGroup()->addStringDouble(
"Laser Localization Score", 8,
new ArRetFunctorC<double, ArLocalizationTask>(
&locTask, &ArLocalizationTask::getLocalizationScore),
"%.03f");
Aria::getInfoGroup()->addStringInt(
"Laser Loc Num Samples", 8,
new ArRetFunctorC<int, ArLocalizationTask>(
&locTask, &ArLocalizationTask::getCurrentNumSamples),
"%4d");
// Display gyro status if gyro is enabled and is being handled by the firmware (gyro types 2, 3, or 4).
// (If the firmware detects an error communicating with the gyro or IMU it
// returns a flag, and stops using it.)
// (This gyro type parameter, and fault flag, are only in ARCOS, not Seekur firmware)
if(robot.getOrigRobotConfig() && robot.getOrigRobotConfig()->getGyroType() > 1)
{
Aria::getInfoGroup()->addStringString(
"Gyro/IMU Status", 10,
new ArGlobalRetFunctor1<const char*, ArRobot*>(&getGyroStatusString, &robot)
);
}
// Setup the dock if there is a docking system on board.
ArServerModeDock *modeDock = NULL;
modeDock = ArServerModeDock::createDock(&server, &robot, &locTask,
&pathTask);
if (modeDock != NULL)
{
modeDock->checkDock();
modeDock->addAsDefaultMode();
modeDock->addToConfig(Aria::getConfig());
modeDock->addControlCommands(&commands);
}
// Make Stop mode the default (If current mode deactivates without entering
// a new mode, then Stop Mode will be selected)
modeStop.addAsDefaultMode();
// TODO move up near where stop mode is created?
/* Services that allow the client to initiate scanning with the laser to
create maps in Mapper3 (So not possible with SONARNL): */
ArServerHandlerMapping handlerMapping(&server, &robot, firstLaser,
fileDir, "", true);
// make laser localization stop while mapping
handlerMapping.addMappingStartCallback(
new ArFunctor1C<ArLocalizationTask, bool>
(&locTask, &ArLocalizationTask::setIdleFlag, true));
// and then make it start again when we're doine
handlerMapping.addMappingEndCallback(
new ArFunctor1C<ArLocalizationTask, bool>
(&locTask, &ArLocalizationTask::setIdleFlag, false));
// Make it so our "lost" actions don't stop us while mapping
handlerMapping.addMappingStartCallback(actionLostPath.getDisableCB());
handlerMapping.addMappingStartCallback(actionLostRatioDrive.getDisableCB());
handlerMapping.addMappingStartCallback(actionLostWander.getDisableCB());
// And then let them make us stop as usual when done mapping
handlerMapping.addMappingEndCallback(actionLostPath.getEnableCB());
handlerMapping.addMappingEndCallback(actionLostRatioDrive.getEnableCB());
handlerMapping.addMappingEndCallback(actionLostWander.getEnableCB());
// don't let forbidden lines show up as obstacles while mapping
// (they'll just interfere with driving while mapping, and localization is off anyway)
handlerMapping.addMappingStartCallback(forbidden.getDisableCB());
// let forbidden lines show up as obstacles again as usual after mapping
handlerMapping.addMappingEndCallback(forbidden.getEnableCB());
/*
// If we are on a simulator, move the robot back to its starting position,
// and reset its odometry.
// This will allow localizeRobotAtHomeBlocking() below will (probably) work (it
// tries current odometry (which will be 0,0,0) and all the map
// home points.
// (Ignored by a real robot)
//robot.com(ArCommands::SIM_RESET);
*/
// create a pose storage class, this will let the program keep track
// of where the robot is between runs... after we try and restore
// from this file it will start saving the robot's pose into the
// file
ArPoseStorage poseStorage(&robot);
/// if we could restore the pose from then set the sim there (this
/// won't do anything to the real robot)... if we couldn't restore
/// the pose then just reset the position of the robot (which again
/// won't do anything to the real robot)
if (poseStorage.restorePose("robotPose"))
serverLocHandler.setSimPose(robot.getPose());
else
robot.com(ArCommands::SIM_RESET);
/* File transfer services: */
#ifdef WIN32
// Not implemented for Windows yet.
ArLog::log(ArLog::Normal, "Note, file upload/download services are not implemented for Windows; not enabling them.");
#else
// This block will allow you to set up where you get and put files
// to/from, just comment them out if you don't want this to happen
// /*
ArServerFileLister fileLister(&server, fileDir);
ArServerFileToClient fileToClient(&server, fileDir);
ArServerFileFromClient fileFromClient(&server, fileDir, "/tmp");
ArServerDeleteFileOnServer deleteFileOnServer(&server, fileDir);
// */
#endif
/* Video image streaming, and camera controls (Requires SAVserver or ACTS) */
// Forward any video if either ACTS or SAV server are running.
// You can find out more about SAV and ACTS on our website
// http://robots.activmedia.com. ACTS is for color tracking and is
// a seperate product. SAV just does software A/V transmitting and is
// free to all our customers. Just run ACTS or SAV server before you
// start this program and this class here will forward video from the
// server to the client.
ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
// make a camera to use in case we have video. the camera collection collects
// multiple ptz cameras
ArPTZ *camera = NULL;
ArServerHandlerCamera *handlerCamera = NULL;
ArCameraCollection *cameraCollection = NULL;
// if we have video then set up a camera
if (videoForwarder.isForwardingVideo())
{
cameraCollection = new ArCameraCollection();
cameraCollection->addCamera("Cam1", "PTZ", "Camera", "PTZ");
videoForwarder.setCameraName("Cam1");
videoForwarder.addToCameraCollection(*cameraCollection);
camera = new ArVCC4(&robot); //, invertedCamera, ArVCC4::COMM_UNKNOWN, true, true);
// To use an RVision SEE camera instead:
// camera = new ArRVisionPTZ(&robot);
camera->init();
handlerCamera = new ArServerHandlerCamera("Cam1",
&server,
&robot,
camera,
cameraCollection);
pathTask.addGoalFinishedCB(
new ArFunctorC<ArServerHandlerCamera>(
handlerCamera,
&ArServerHandlerCamera::cameraModeLookAtGoalClearGoal));
}
// After all of the cameras / videos have been created and added to the collection,
// then start the collection server.
//
if (cameraCollection != NULL) {
new ArServerHandlerCameraCollection(&server, cameraCollection);
}
/* Load configuration values, map, and begin! */
// When parsing the configuration file, also look at the program's command line options
// from the command-line argument parser as well as the configuration file.
// (So you can use any argument on the command line, namely -map.)
Aria::getConfig()->useArgumentParser(&parser);
puts("xxx");puts("aaa"); fflush(stdout);
// Read in parameter files.
ArLog::log(ArLog::Normal, "Loading config file %s into ArConfig (base directory %s)...", Arnl::getTypicalParamFileName(), Aria::getConfig()->getBaseDirectory());
if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
{
ArLog::log(ArLog::Normal, "Trouble loading configuration file, exiting");
Aria::exit(5);
}
// Warn about unknown params.
if (!simpleOpener.checkAndLog() || !parser.checkHelpAndWarnUnparsed())
{
logOptions(argv[0]);
Aria::exit(6);
}
// Warn if there is no map
if (map.getFileName() == NULL || strlen(map.getFileName()) <= 0)
{
ArLog::log(ArLog::Normal, "");
ArLog::log(ArLog::Normal, "### No map file is set up, you can make a map with the following procedure");
ArLog::log(ArLog::Normal, " 0) You can find this information in README.txt or docs/Mapping.txt");
ArLog::log(ArLog::Normal, " 1) Connect to this server with MobileEyes");
ArLog::log(ArLog::Normal, " 2) Go to Tools->Map Creation->Start Scan");
ArLog::log(ArLog::Normal, " 3) Give the map a name and hit okay");
ArLog::log(ArLog::Normal, " 4) Drive the robot around your space (see docs/Mapping.txt");
ArLog::log(ArLog::Normal, " 5) Go to Tools->Map Creation->Stop Scan");
ArLog::log(ArLog::Normal, " 6) Start up Mapper3");
ArLog::log(ArLog::Normal, " 7) Go to File->Open on Robot");
ArLog::log(ArLog::Normal, " 8) Select the .2d you created");
ArLog::log(ArLog::Normal, " 9) Create a .map");
ArLog::log(ArLog::Normal, " 10) Go to File->Save on Robot");
ArLog::log(ArLog::Normal, " 11) In MobileEyes, go to Tools->Robot Config");
ArLog::log(ArLog::Normal, " 12) Choose the Files section");
ArLog::log(ArLog::Normal, " 13) Enter the path and name of your new .map file for the value of the Map parameter.");
ArLog::log(ArLog::Normal, " 14) Press OK and your new map should become the map used");
ArLog::log(ArLog::Normal, "");
}
// Print a log message notifying user of the directory for map files
ArLog::log(ArLog::Normal, "");
ArLog::log(ArLog::Normal,
"Directory for maps and file serving: %s", fileDir);
ArLog::log(ArLog::Normal, "See the ARNL README.txt for more information");
ArLog::log(ArLog::Normal, "");
// Do an initial localization of the robot. It tries all the home points
// in the map, as well as the robot's current odometric position, as possible
// places the robot is likely to be at startup. If successful, it will
// also save the position it found to be the best localized position as the
// "Home" position, which can be obtained from the localization task (and is
// used by the "Go to home" network request).
locTask.localizeRobotAtHomeBlocking();
// Let the client switch manager (for multirobot) spin off into its own thread
// TODO move to multirobot example?
clientSwitch.runAsync();
// Start the networking server's thread
server.runAsync();
// Add a key handler so that you can exit by pressing
// escape. Note that this key handler, however, prevents this program from
// running in the background (e.g. as a system daemon or run from
// the shell with "&") -- it will lock up trying to read the keys;
// remove this if you wish to be able to run this program in the background.
ArKeyHandler *keyHandler;
if ((keyHandler = Aria::getKeyHandler()) == NULL)
{
keyHandler = new ArKeyHandler;
Aria::setKeyHandler(keyHandler);
robot.lock();
robot.attachKeyHandler(keyHandler);
robot.unlock();
puts("Server running. To exit, press escape.");
}
ArnlASyncTaskExample asyncTaskExample(&pathTask, &robot, &modeGoto, &parser);
// Enable the motors and wait until the robot exits (disconnection, etc.) or this program is
// canceled.
robot.enableMotors();
robot.waitForRunExit();
Aria::exit(0);
}
int main(int argc, char **argv)
{
// Initialize Aria and Arnl global information
Aria::init();
Arnl::init();
// You can change default ArLog options in this call, but the settings in the parameter file
// (arnl.p) which is loaded below (Aria::getConfig()->parseFile()) will override the options.
//ArLog::init(ArLog::File, ArLog::Normal, "log.txt", true, true);
// Used to parse the command line arguments.
ArArgumentParser parser(&argc, argv);
// Load default arguments for this computer (from /etc/Aria.args, environment
// variables, and other places)
parser.loadDefaultArguments();
#ifdef ARNL_LASER
// Tell the laser connector to always connect the first laser since
// this program always requires a laser.
parser.addDefaultArgument("-connectLaser");
#endif
// The robot object
ArRobot robot;
// handle messages from robot controller firmware and log the contents
robot.addPacketHandler(new ArGlobalRetFunctor1<bool, ArRobotPacket*>(&handleDebugMessage));
// This object is used to connect to the robot, which can be configured via
// command line arguments.
ArRobotConnector robotConnector(&parser, &robot);
// Connect to the robot
if (!robotConnector.connectRobot())
{
ArLog::log(ArLog::Normal, "Error: Could not connect to robot... exiting");
Aria::exit(3);
}
// Set up where we'll look for files. Arnl::init() set Aria's default
// directory to Arnl's default directory; addDirectories() appends this
// "examples" directory.
char fileDir[1024];
ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(),
"examples");
// To direct log messages to a file, or to change the log level, use these calls:
//ArLog::init(ArLog::File, ArLog::Normal, "log.txt", true, true);
//ArLog::init(ArLog::File, ArLog::Verbose);
// Add a section to the configuration to change ArLog parameters
ArLog::addToConfig(Aria::getConfig());
// set up a gyro (if the robot is older and its firmware does not
// automatically incorporate gyro corrections, then this object will do it)
ArAnalogGyro gyro(&robot);
// Our networking server
ArServerBase server;
#ifdef ARNL_GPSLOC
// GPS connector.
ArGPSConnector gpsConnector(&parser);
#endif
// Set up our simpleOpener, used to set up the networking server
ArServerSimpleOpener simpleOpener(&parser);
#ifdef ARNL_LASER
// the laser connector
ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
#endif
// used to connect to camera PTZ control
ArPTZConnector ptzConnector(&parser, &robot);
#ifdef ARNL_MULTIROBOT
// Used to connect to a "central server" which can be used as a proxy
// for multiple robot servers, and as a way for them to also communicate with
// each other. (objects implementing some of these inter-robot communication
// features are created below).
// NOTE: If the central server is running on the same host as robot server(s),
// then you must use the -serverPort argument to instruct these robot-control
// server(s) to use different ports than the default 7272, since the central
// server will use that port.
ArClientSwitchManager clientSwitch(&server, &parser);
#endif
// Load default arguments for this computer (from /etc/Aria.args, environment
// variables, and other places)
parser.loadDefaultArguments();
// Parse arguments
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
logOptions(argv[0]);
Aria::exit(1);
}
// This causes Aria::exit(9) to be called if the robot unexpectedly
// disconnects
ArGlobalFunctor1<int> shutdownFunctor(&Aria::exit, 9);
robot.addDisconnectOnErrorCB(&shutdownFunctor);
// Create an ArSonarDevice object (ArRangeDevice subclass) and
// connect it to the robot.
ArSonarDevice sonarDev;
robot.addRangeDevice(&sonarDev);
// This object will allow robot's movement parameters to be changed through
// a Robot Configuration section in the ArConfig global configuration facility.
ArRobotConfig robotConfig(&robot);
// Include gyro configuration options in the robot configuration section.
robotConfig.addAnalogGyro(&gyro);
// Start the robot thread.
robot.runAsync(true);
#ifdef ARNL_GPSLOC
// On the Seekur, power to the GPS receiver is switched on by this command.
// (A third argument of 0 would turn it off). On other robots this command is
// ignored. If this fails, you may need to reset the port with ARIA demo or
// seekurPower program (turn port off then on again). If the port is already
// on, it will have no effect on the GPS (it will remain powered.)
// Do this now before connecting to lasers to give it plenty of time to power
// on, initialize, and find a good position before GPS localization begins.
ArLog::log(ArLog::Normal, "Turning on GPS power... (Seekur/Seekur Jr. power port 6)");
robot.com2Bytes(116, 6, 1);
#endif
#ifdef ARNL_LASER
// connect the laser(s) if it was requested, this adds them to the
// robot too, and starts them running in their own threads
ArLog::log(ArLog::Normal, "Connecting to laser(s) configured in parameters...");
if (!laserConnector.connectLasers())
{
ArLog::log(ArLog::Normal, "Error: Could not connect to laser(s). Exiting.");
Aria::exit(2);
}
ArLog::log(ArLog::Normal, "Done connecting to laser(s).");
#endif
#if defined(ARNL_LASERLOC) || defined(ARNL_MAPPING)
// find the laser we should use for localization and/or mapping,
// which will be the first laser
robot.lock();
ArLaser *firstLaser = robot.findLaser(1);
if (firstLaser == NULL || !firstLaser->isConnected())
{
ArLog::log(ArLog::Normal, "Did not have laser 1 or it is not connected, cannot start localization and/or mapping... exiting");
Aria::exit(2);
}
robot.unlock();
#endif
/* Create and set up map object */
// Set up the map object, this will look for files in the examples
// directory (unless the file name starts with a /, \, or .
// You can take out the 'fileDir' argument to look in the program's current directory
// instead.
// When a configuration file is loaded into ArConfig later, if it specifies a
// map file, then that file will be loaded as the map.
ArMap map(fileDir);
// set it up to ignore empty file names (otherwise if a configuration omits
// the map file, the whole configuration change will fail)
map.setIgnoreEmptyFileName(true);
// ignore the case, so that if someone is using MobileEyes or
// MobilePlanner from Windows and changes the case on a map name,
// it will still work.
map.setIgnoreCase(true);
/* Create localization threads */
#ifdef ARNL_MULTILOC
ArLocalizationManager locManager(&robot, &map);
#define LOCTASK locManager
#endif
#ifdef ARNL_LASERLOC
ArLog::log(ArLog::Normal, "Creating laser localization task");
// Laser Monte-Carlo Localization
ArLocalizationTask locTask(&robot, firstLaser, &map);
#ifdef ARNL_MULTILOC
locManager.addLocalizationTask(&locTask);
#else
#define LOCTASK locTask
#endif
#endif
#ifdef ARNL_SONARLOC
ArLog::log(ArLog::Normal, "Creating sonar localization task");
ArSonarLocalizationTask locTask(&robot, &sonarDev, &map);
#ifdef ARNL_MULTILOC
locManager.addLocalizationTask(&locTask);
#else
#define LOCTASK locTask
#endif
#endif
#ifndef ARNL_GPSLOC
// A callback function, which is called if localization fails
ArGlobalFunctor1<int> locFailedCB(&locFailed);
locTask.setFailedCallBack(&locFailedCB); //, &locTask);
#endif
#ifdef ARNL_GPSLOC
ArLog::log(ArLog::Normal, "Connecting to GPS...");
// Connect to GPS
ArGPS *gps = gpsConnector.createGPS(&robot);
if(!gps || !gps->connect())
{
ArLog::log(ArLog::Terse, "Error connecting to GPS device."
"Try -gpsType, -gpsPort, and/or -gpsBaud command-line arguments."
"Use -help for help. Exiting.");
Aria::exit(5);
}
// set up GPS localization task
ArLog::log(ArLog::Normal, "Creating GPS localization task");
ArGPSLocalizationTask gpsLocTask(&robot, gps, &map);
#ifdef ARNL_MULTILOC
locManager.addLocalizationTask(&gpsLocTask);
#else
#define LOCTASK gpsLocTask
#endif
#endif
#ifdef ARNL_LASER
// Set some options and callbacks on each laser that the laser connector
// connected to.
std::map<int, ArLaser *>::iterator laserIt;
for (laserIt = robot.getLaserMap()->begin();
laserIt != robot.getLaserMap()->end();
laserIt++)
{
int laserNum = (*laserIt).first;
ArLaser *laser = (*laserIt).second;
// Skip lasers that aren't connected
if(!laser->isConnected())
continue;
// add the disconnectOnError CB to shut things down if the laser
// connection is lost
laser->addDisconnectOnErrorCB(&shutdownFunctor);
// set the number of cumulative readings the laser will take
laser->setCumulativeBufferSize(200);
// set the cumulative clean offset (so that they don't all fire at once)
laser->setCumulativeCleanOffset(laserNum * 100);
// reset the cumulative clean time (to make the new offset take effect)
laser->resetLastCumulativeCleanTime();
// Add the packet count to the Aria info strings (It will be included in
// MobileEyes custom details so you can monitor whether the laser data is
// being received correctly)
std::string laserPacketCountName;
laserPacketCountName = laser->getName();
laserPacketCountName += " Packet Count";
Aria::getInfoGroup()->addStringInt(
laserPacketCountName.c_str(), 10,
new ArRetFunctorC<int, ArLaser>(laser,
&ArLaser::getReadingCount));
}
#endif
/* Start the server */
// Open the networking server
if (!simpleOpener.open(&server, fileDir, 240))
{
ArLog::log(ArLog::Normal, "Error: Could not open server.");
exit(2);
}
/* Create various services that provide network access to clients (such as
* MobileEyes), as well as add various additional features to ARNL */
robot.unlock();
// Service to provide drawings of data in the map display :
ArServerInfoDrawings drawings(&server);
drawings.addRobotsRangeDevices(&robot);
#ifdef ARNL_LASERLOC
/* Show the sample points used by MCL */
ArDrawingData drawingDataL("polyDots", ArColor(0,255,0), 100, 75);
ArFunctor2C<ArLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorL(&locTask, &ArLocalizationTask::drawRangePoints);
drawings.addDrawing(&drawingDataL, "Localization Points", &drawingFunctorL);
#endif
#ifdef ARNL_GPSLOC
/* Show the positions calculated by GPS localization */
ArDrawingData drawingDataG("polyDots", ArColor(100,100,255), 130, 61);
ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorG(&gpsLocTask, &ArGPSLocalizationTask::drawGPSPoints);
drawings.addDrawing(&drawingDataG, "GPS Points", &drawingFunctorG);
ArDrawingData drawingDataG2("polyDots", ArColor(255,100,100), 100, 62);
ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorG2(&gpsLocTask, &ArGPSLocalizationTask::drawKalmanPoints);
drawings.addDrawing(&drawingDataG2, "Kalman Points", &drawingFunctorG2);
ArDrawingData drawingDataG3("polyDots", ArColor(100,255,100), 70, 63);
ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorG3(&gpsLocTask, &ArGPSLocalizationTask::drawOdoPoints);
drawings.addDrawing(&drawingDataG3, "Odom. Points", &drawingFunctorG3);
ArDrawingData drawingDataG4("polyDots", ArColor(255,50,50), 100, 75);
ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorG4(&gpsLocTask, &ArGPSLocalizationTask::drawKalmanRangePoints);
drawings.addDrawing(&drawingDataG4, "KalRange Points", &drawingFunctorG4);
ArDrawingData drawingDataG5("polySegments", ArColor(100,0,255), 1, 78);
ArFunctor2C<ArGPSLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorG5(&gpsLocTask, &ArGPSLocalizationTask::drawKalmanVariance);
drawings.addDrawing(&drawingDataG5, "VarGPS", &drawingFunctorG5);
#endif
// "Custom" commands. You can add your own custom commands here, they will
// be available in MobileEyes' custom commands (enable in the toolbar or
// access through Robot Tools)
ArServerHandlerCommands commands(&server);
// These provide various kinds of information to the client:
ArServerInfoRobot serverInfoRobot(&server, &robot);
ArServerInfoSensor serverInfoSensor(&server, &robot);
// Provides localization info and allows the client (MobileEyes) to relocalize at a given
// pose:
ArServerInfoLocalization serverInfoLocalization(&server, &robot, &LOCTASK);
ArServerHandlerLocalization serverLocHandler(&server, &robot, &LOCTASK);
// If you're using MobileSim, ArServerHandlerLocalization sends it a command
// to move the robot's true pose if you manually do a localization through
// MobileEyes. To disable that behavior, use this constructor call instead:
// ArServerHandlerLocalization serverLocHandler(&server, &robot, true, false);
// The fifth argument determines whether to send the command to MobileSim.
// Provide the map to the client (and related controls):
ArServerHandlerMap serverMap(&server, &map);
// These objects add some simple (custom) commands to 'commands' for testing and debugging:
ArServerSimpleComUC uCCommands(&commands, &robot); // Send any command to the microcontroller
ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // configure logging
ArServerSimpleComLogRobotConfig configCommands(&commands, &robot); // trigger logging of the robot config parameters
// ArServerSimpleServerCommands serverCommands(&commands, &server); // monitor networking behavior (track packets sent etc.)
// service that allows the client to monitor the communication link status
// between the robot and the client.
//
ArServerHandlerCommMonitor handlerCommMonitor(&server);
// service that allows client to change configuration parameters in ArConfig
ArServerHandlerConfig handlerConfig(&server, Aria::getConfig(),
Arnl::getTypicalDefaultParamFileName(),
Aria::getDirectory());
// This service causes the client to show simple dialog boxes
ArServerHandlerPopup popupServer(&server);
/* Set up the possible modes for remote control from a client such as
* MobileEyes:
*/
// Mode To stop and remain stopped:
ArServerModeStop modeStop(&server, &robot);
#ifndef ARNL_SONARLOC
// Cause the sonar to turn off automatically
// when the robot is stopped, and turn it back on when commands to move
// are sent. (Note, if using SONARNL to localize, then don't do this
// since localization may get lost)
ArSonarAutoDisabler sonarAutoDisabler(&robot);
#endif
// Teleoperation modes To drive by keyboard, joystick, etc:
ArServerModeRatioDrive modeRatioDrive(&server, &robot);
// Prevent normal teleoperation driving if localization is lost using
// a high-priority action, which enables itself when the particular mode is
// active.
// (You have to enter unsafe drive mode to drive when lost.)
ArActionLost actionLostRatioDrive(&LOCTASK, NULL, &modeRatioDrive);
modeRatioDrive.getActionGroup()->addAction(&actionLostRatioDrive, 110);
// Add drive mode section to the configuration, and also some custom (simple) commands:
modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings");
modeRatioDrive.addControlCommands(&commands);
// Wander mode (also prevent wandering if lost):
ArServerModeWander modeWander(&server, &robot);
ArActionLost actionLostWander(&LOCTASK, NULL, &modeWander);
modeWander.getActionGroup()->addAction(&actionLostWander, 110);
// Tool to log data periodically to a file
ArDataLogger dataLogger(&robot, "datalog.txt");
dataLogger.addToConfig(Aria::getConfig()); // make it configurable through ArConfig
// Automatically add anything from the global info group to the data logger.
Aria::getInfoGroup()->addAddStringCallback(dataLogger.getAddStringFunctor());
// This provides a small table of interesting information for the client
// to display to the operator. You can add your own callbacks to show any
// data you want.
ArServerInfoStrings stringInfo(&server);
Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
// The following statements add fields to a set of informational data called
// the InfoGroup. These are served to MobileEyes for displayi (turn on by enabling Details
// and Custom Details in the View menu of MobileEyes.)
Aria::getInfoGroup()->addStringInt(
"Motor Packet Count", 10,
new ArConstRetFunctorC<int, ArRobot>(&robot,
&ArRobot::getMotorPacCount));
#ifdef ARNL_LASERLOC
Aria::getInfoGroup()->addStringDouble(
"Laser Localization Score", 8,
new ArRetFunctorC<double, ArLocalizationTask>(
&locTask, &ArLocalizationTask::getLocalizationScore),
"%.03f");
Aria::getInfoGroup()->addStringInt(
"Laser Loc Num Samples", 8,
new ArRetFunctorC<int, ArLocalizationTask>(
&locTask, &ArLocalizationTask::getCurrentNumSamples),
"%4d");
#elif defined(ARNL_SONARLOC)
Aria::getInfoGroup()->addStringDouble(
"Sonar Localization Score", 8,
new ArRetFunctorC<double, ArSonarLocalizationTask>(
&locTask,
&ArSonarLocalizationTask::getLocalizationScore),
"%.03f");
Aria::getInfoGroup()->addStringInt(
"Sonar Loc Num Samples", 8,
new ArRetFunctorC<int, ArSonarLocalizationTask>(
&locTask, &ArSonarLocalizationTask::getCurrentNumSamples),
"%4d");
#endif
#ifdef ARNL_GPSLOC
const char *dopfmt = "%2.4f";
const char *posfmt = "%2.8f";
const char *altfmt = "%3.6f m";
Aria::getInfoGroup()->addStringString(
"GPS Fix Mode", 25,
new ArConstRetFunctorC<const char*, ArGPS>(gps, &ArGPS::getFixTypeName)
);
Aria::getInfoGroup()->addStringInt(
"GPS Num. Satellites", 4,
new ArConstRetFunctorC<int, ArGPS>(gps, &ArGPS::getNumSatellitesTracked)
);
Aria::getInfoGroup()->addStringDouble(
"GPS HDOP", 12,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getHDOP),
dopfmt
);
Aria::getInfoGroup()->addStringDouble(
"GPS VDOP", 5,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getVDOP),
dopfmt
);
Aria::getInfoGroup()->addStringDouble(
"GPS PDOP", 5,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getPDOP),
dopfmt
);
Aria::getInfoGroup()->addStringDouble(
"Latitude", 15,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLatitude),
posfmt
);
Aria::getInfoGroup()->addStringDouble(
"Longitude", 15,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLongitude),
posfmt
);
Aria::getInfoGroup()->addStringDouble(
"Altitude", 8,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getAltitude),
altfmt
);
// only some GPS receivers provide these, but you can uncomment them
// here to enable them if yours does.
/*
const char *errfmt = "%2.4f m";
Aria::getInfoGroup()->addStringDouble(
"GPS Lat. Err.", 6,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLatitudeError),
errfmt
);
Aria::getInfoGroup()->addStringDouble(
"GPS Lon. Err.", 6,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getLongitudeError),
errfmt
);
Aria::getInfoGroup()->addStringDouble(
"GPS Alt. Err.", 6,
new ArConstRetFunctorC<double, ArGPS>(gps, &ArGPS::getAltitudeError),
errfmt
);
*/
Aria::getInfoGroup()->addStringDouble(
"MOGS Localization Score", 8,
new ArRetFunctorC<double, ArGPSLocalizationTask>(
&gpsLocTask, &ArGPSLocalizationTask::getLocalizationScore),
"%.03f"
);
#endif
// Display gyro status if gyro is enabled and is being handled by the firmware (gyro types 2, 3, or 4).
// (If the firmware detects an error communicating with the gyro or IMU it
// returns a flag, and stops using it.)
// (This gyro type parameter, and fault flag, are only in ARCOS, not Seekur firmware)
if(robot.getOrigRobotConfig() && robot.getOrigRobotConfig()->getGyroType() > 1)
{
Aria::getInfoGroup()->addStringString(
"Gyro/IMU Status", 10,
new ArGlobalRetFunctor1<const char*, ArRobot*>(&getGyroStatusString, &robot)
);
}
// Display system CPU and wireless network status
ArSystemStatus::startPeriodicUpdate(1000); // update every 1 second
Aria::getInfoGroup()->addStringDouble("CPU Use", 10, ArSystemStatus::getCPUPercentFunctor(), "% 4.0f%%");
Aria::getInfoGroup()->addStringInt("Wireless Link Quality", 9, ArSystemStatus::getWirelessLinkQualityFunctor(), "%d");
Aria::getInfoGroup()->addStringInt("Wireless Link Noise", 9, ArSystemStatus::getWirelessLinkNoiseFunctor(), "%d");
Aria::getInfoGroup()->addStringInt("Wireless Signal", 9, ArSystemStatus::getWirelessLinkSignalFunctor(), "%d");
// stats on how far its driven since software started
Aria::getInfoGroup()->addStringDouble("Distance Travelled (m)", 20, new ArRetFunctorC<double, ArRobot>(&robot, &ArRobot::getOdometerDistanceMeters), "%.2f");
Aria::getInfoGroup()->addStringDouble("Run time (min)", 20, new
ArRetFunctorC<double, ArRobot>(&robot, &ArRobot::getOdometerTimeMinutes),
"%.2f");
#ifdef ARNL_GPSLOC
// Add some "custom commands" for setting up initial GPS offset and heading.
gpsLocTask.addLocalizationInitCommands(&commands);
// Add some commands for manually creating map objects based on GPS positions:
// ArGPSMapTools gpsMapTools(gps, &robot, &commands, &map);
// Add command to set simulated GPS position manually
if(gpsConnector.getGPSType() == ArGPSConnector::Simulator)
{
ArSimulatedGPS *simGPS = dynamic_cast<ArSimulatedGPS*>(gps);
// simGPS->setDummyPosition(42.80709, -71.579047, 100);
commands.addStringCommand("GPS:setDummyPosition",
"Manually set a new dummy position for simulated GPS. Provide latitude (required), longitude (required) and altitude (optional)",
new ArFunctor1C<ArSimulatedGPS, ArArgumentBuilder*>(simGPS, &ArSimulatedGPS::setDummyPositionFromArgs)
);
}
#endif
// Make Stop mode the default (If current mode deactivates without entering
// a new mode, then Stop Mode will be selected)
modeStop.addAsDefaultMode();
// TODO move up near where stop mode is created?
#ifdef ARNL_MAPPING
/* Services that allow the client to initiate scanning with the laser to
create maps in Mapper3 (So not possible with SONARNL): */
ArServerHandlerMapping handlerMapping(&server, &robot, firstLaser,
fileDir, "", true);
#ifdef ARNL_LASERLOC
// make laser localization stop while mapping
handlerMapping.addMappingStartCallback(
new ArFunctor1C<ArLocalizationTask, bool>
(&locTask, &ArLocalizationTask::setIdleFlag, true));
// and then make it start again when we're doine
handlerMapping.addMappingEndCallback(
new ArFunctor1C<ArLocalizationTask, bool>
(&locTask, &ArLocalizationTask::setIdleFlag, false));
#endif
#ifdef ARNL_GPSLOC
// Save GPS positions in the .2d scan log when making a map
handlerMapping.addLocationData("robotGPS",
gpsLocTask.getPoseInterpPositionCallback());
// add the starting latitude and longitude info to the .2d scan log
handlerMapping.addMappingStartCallback(
new ArFunctor1C<ArGPSLocalizationTask, ArServerHandlerMapping *>
(&gpsLocTask, &ArGPSLocalizationTask::addScanInfo,
&handlerMapping));
#endif
// Make it so our "lost" actions don't stop us while mapping
handlerMapping.addMappingStartCallback(actionLostRatioDrive.getDisableCB());
handlerMapping.addMappingStartCallback(actionLostWander.getDisableCB());
// And then let them make us stop as usual when done mapping
handlerMapping.addMappingEndCallback(actionLostRatioDrive.getEnableCB());
handlerMapping.addMappingEndCallback(actionLostWander.getEnableCB());
#endif // ARNL_MAPPING
/*
// If we are on a simulator, move the robot back to its starting position,
// and reset its odometry.
// This will allow localizeRobotAtHomeBlocking() below will (probably) work (it
// tries current odometry (which will be 0,0,0) and all the map
// home points.
// (Ignored by a real robot)
//robot.com(ArCommands::SIM_RESET);
*/
// create a pose storage class, this will let the program keep track
// of where the robot is between runs... after we try and restore
// from this file it will start saving the robot's pose into the
// file
ArPoseStorage poseStorage(&robot);
/// if we could restore the pose from then set the sim there (this
/// won't do anything to the real robot)... if we couldn't restore
/// the pose then just reset the position of the robot (which again
/// won't do anything to the real robot)
if (poseStorage.restorePose("robotPose"))
serverLocHandler.setSimPose(robot.getPose());
//else
// robot.com(ArCommands::SIM_RESET);
/* File transfer services: */
#pragma GPP off
#ifdef WIN32
// Not implemented for Windows yet.
ArLog::log(ArLog::Normal, "Note, file upload/download services are not implemented for Windows; not enabling them.");
#else
// This block will allow you to set up where you get and put files
// to/from, just comment them out if you don't want this to happen
// /*
ArServerFileLister fileLister(&server, fileDir);
ArServerFileToClient fileToClient(&server, fileDir);
ArServerFileFromClient fileFromClient(&server, fileDir, "/tmp");
ArServerDeleteFileOnServer deleteFileOnServer(&server, fileDir);
// */
#endif
#pragma GPP on
/* Video image streaming, and camera controls (Requires SAVserver or ACTS) */
// Forward one video stream if either ACTS, ArVideo videoSubServer,
// or SAV server are running.
// ArHybridForwarderVideo allows this program to be separate from the ArVideo
// library. You could replace videoForwarder and the PTZ connection code below
// with a call to ArVideo::createVideoServers(), and link the program to the
// ArVideo library if you want to include video capture in the same program
// as robot control.
ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
// connect to first configured camera PTZ controls (in robot parameter file and
// command line options)
ptzConnector.connect();
ArCameraCollection cameraCollection;
ArPTZ *ptz = ptzConnector.getPTZ(0);
if(ptz)
{
ArLog::log(ArLog::Normal, "Connected to PTZ Camera");
cameraCollection.addCamera("Camera1", ptz->getTypeName(), "Camera", ptz->getTypeName());
videoForwarder.setCameraName("Camera1");
videoForwarder.addToCameraCollection(cameraCollection);
new ArServerHandlerCamera("Camera1",
&server,
&robot,
ptz,
&cameraCollection);
}
// Allows client to find any camera servers created above
ArServerHandlerCameraCollection cameraCollectionServer(&server, &cameraCollection);
/* Load configuration values, map, and begin! */
// When parsing the configuration file, also look at the program's command line options
// from the command-line argument parser as well as the configuration file.
// (So you can use any argument on the command line, namely -map.)
Aria::getConfig()->useArgumentParser(&parser);
// Read in parameter files.
ArLog::log(ArLog::Normal, "Loading config file %s%s into ArConfig...", Aria::getDirectory(), Arnl::getTypicalParamFileName());
if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
{
ArLog::log(ArLog::Normal, "Could not load ARNL configuration file. Set ARNL environment variable to use non-default installation director.y");
Aria::exit(5);
}
// Warn about unknown params.
if (!simpleOpener.checkAndLog() || !parser.checkHelpAndWarnUnparsed())
{
logOptions(argv[0]);
Aria::exit(6);
}
// Warn if there is no map
if (map.getFileName() == NULL || strlen(map.getFileName()) <= 0)
{
ArLog::log(ArLog::Normal, "");
ArLog::log(ArLog::Normal, "### No map file is set up, you can make a map with the following procedure");
#ifdef ARNL
ArLog::log(ArLog::Normal, " 0) You can find this information in README.txt or docs/Mapping.txt");
ArLog::log(ArLog::Normal, " 1) Connect to this server with MobileEyes");
ArLog::log(ArLog::Normal, " 2) Go to Tools->Map Creation->Start Scan");
ArLog::log(ArLog::Normal, " 3) Give the map a name and hit okay");
ArLog::log(ArLog::Normal, " 4) Drive the robot around your space (see docs/Mapping.txt");
ArLog::log(ArLog::Normal, " 5) Go to Tools->Map Creation->Stop Scan");
ArLog::log(ArLog::Normal, " 6) Start up Mapper3");
ArLog::log(ArLog::Normal, " 7) Go to File->Open on Robot");
ArLog::log(ArLog::Normal, " 8) Select the .2d you created");
ArLog::log(ArLog::Normal, " 9) Create a .map");
ArLog::log(ArLog::Normal, " 10) Go to File->Save on Robot");
ArLog::log(ArLog::Normal, " 11) In MobileEyes, go to Tools->Robot Config");
ArLog::log(ArLog::Normal, " 12) Choose the Files section");
ArLog::log(ArLog::Normal, " 13) Enter the path and name of your new .map file for the value of the Map parameter.");
ArLog::log(ArLog::Normal, " 14) Press OK and your new map should become the map used");
ArLog::log(ArLog::Normal, "");
#elif defined(SONARNL)
ArLog::log(ArLog::Normal, " 0) You can find this information in README.txt or docs/SonarMapping.txt");
ArLog::log(ArLog::Normal, " 1) Start up Mapper3Basic");
ArLog::log(ArLog::Normal, " 2) Go to File->New");
ArLog::log(ArLog::Normal, " 3) Draw a line map of your area (make sure it is to scale)");
ArLog::log(ArLog::Normal, " 4) Go to File->Save on Robot");
ArLog::log(ArLog::Normal, " 5) In MobileEyes, go to Tools->Robot Config");
ArLog::log(ArLog::Normal, " 6) Choose the Files section");
ArLog::log(ArLog::Normal, " 7) Enter the path and name of your new .map file for the value of the Map parameter.");
ArLog::log(ArLog::Normal, " 8) Press OK and your new map should become the map used");
ArLog::log(ArLog::Normal, "");
#endif
#ifdef ARNL_GPSLOC
ArLog::log(ArLog::Normal, "\n See docs/GPSMapping.txt for instructions on creating a map for GPS localization");
#endif
}
// Print a log message notifying user of the directory for map files
ArLog::log(ArLog::Normal, "");
ArLog::log(ArLog::Normal,
"Directory for maps and file serving: %s", fileDir);
ArLog::log(ArLog::Normal, "See the ARNL README.txt for more information");
ArLog::log(ArLog::Normal, "");
// Do an initial localization of the robot. ARNL and SONARNL try all the home points
// in the map, as well as the robot's current odometric position, as possible
// places the robot is likely to be at startup. If successful, it will
// also save the position it found to be the best localized position as the
// "Home" position, which can be obtained from the localization task (and is
// used by the "Go to home" network request).
// MOGS instead just initializes at the current GPS position.
// (You will stil have to drive the robot so it can determine the robot's
// heading, however. See GPS Mapping instructions.)
LOCTASK.localizeRobotAtHomeBlocking();
#ifdef ARNL_MULTIROBOT
// Let the client switch manager (for multirobot) spin off into its own thread
// TODO move to multirobot example?
clientSwitch.runAsync();
#endif
// Start the networking server's thread
server.runAsync();
ArLog::log(ArLog::Normal, "Server running. To exit, press CTRL-C.");
// Enable the motors and wait until the robot exits (disconnection, etc.) or this program is
// canceled.
robot.enableMotors();
robot.waitForRunExit();
Aria::exit(0);
}
void Joydrive::drive(void)
{
int trans, rot;
ArPose pose;
ArPose rpose;
ArTransform transform;
ArRangeDevice *dev;
ArSensorReading *son;
if (!myRobot->isConnected())
{
printf("Lost connection to the robot, exiting\n");
exit(0);
}
printf("\rx %6.1f y %6.1f th %6.1f",
myRobot->getX(), myRobot->getY(), myRobot->getTh());
fflush(stdout);
if (myJoyHandler.haveJoystick() && myJoyHandler.getButton(1))
{
if (ArMath::fabs(myRobot->getVel()) < 10.0)
myRobot->comInt(ArCommands::ENABLE, 1);
myJoyHandler.getAdjusted(&rot, &trans);
myRobot->setVel(trans);
myRobot->setRotVel(-rot);
}
else
{
myRobot->setVel(0);
myRobot->setRotVel(0);
}
if (myJoyHandler.haveJoystick() && myJoyHandler.getButton(2) &&
time(NULL) - myLastPress > 1)
{
myLastPress = time(NULL);
printf("\n");
switch (myTest)
{
case 1:
printf("Moving back to the origin.\n");
pose.setPose(0, 0, 0);
myRobot->moveTo(pose);
break;
case 2:
printf("Moving over a meter.\n");
pose.setPose(myRobot->getX() + 1000, myRobot->getY(), 0);
myRobot->moveTo(pose);
break;
case 3:
printf("Doing a transform test....\n");
printf("\nOrigin should be transformed to the robots coords.\n");
transform = myRobot->getToGlobalTransform();
pose.setPose(0, 0, 0);
pose = transform.doTransform(pose);
rpose = myRobot->getPose();
printf("Pos: ");
pose.log();
printf("Robot: ");
rpose.log();
if (pose.findDistanceTo(rpose) < .1)
printf("Success\n");
else
printf("#### FAILURE\n");
printf("\nRobot coords should be transformed to the origin.\n");
transform = myRobot->getToLocalTransform();
pose = myRobot->getPose();
pose = transform.doTransform(pose);
rpose.setPose(0, 0, 0);
printf("Pos: ");
pose.log();
printf("Robot: ");
rpose.log();
if (pose.findDistanceTo(rpose) < .1)
printf("Success\n");
else
printf("#### FAILURE\n");
break;
case 4:
printf("Doing a tranform test...\n");
printf("A point 1 meter to the -x from the robot (in local coords) should be transformed into global coordinates.\n");
transform = myRobot->getToGlobalTransform();
pose.setPose(-1000, 0, 0);
pose = transform.doTransform(pose);
rpose = myRobot->getPose();
printf("Pos: ");
pose.log();
printf("Robot: ");
rpose.log();
if (ArMath::fabs(pose.findDistanceTo(rpose) - 1000.0) < .1)
printf("Probable Success\n");
else
printf("#### FAILURE\n");
break;
case 5:
printf("Doing a transform test on range devices..\n");
printf("Moving the robot +4 meters x and +4 meters y and seeing if the moveTo will move the sonar readings along with it.\n");
dev = myRobot->findRangeDevice("sonar");
if (dev == NULL)
{
printf("No sonar on the robot, can't do the test.\n");
break;
}
printf("Closest sonar reading to the robot is %.0f away\n", dev->currentReadingPolar(1, 0));
printf("Sonar 0 reading is at ");
son = myRobot->getSonarReading(0);
if (son != NULL)
{
pose = son->getPose();
pose.log();
}
pose = myRobot->getPose();
pose.setX(pose.getX() + 4000);
pose.setY(pose.getY() + 4000);
myRobot->moveTo(pose);
printf("Moved robot.\n");
printf("Closest sonar reading to the robot is %.0f away\n", dev->currentReadingPolar(1, 0));
printf("Sonar 0 reading is at ");
son = myRobot->getSonarReading(0);
if (son != NULL)
{
pose = son->getPose();
pose.log();
}
break;
case 6:
printf("Robot position now is:\n");
pose = myRobot->getPose();
pose.log();
printf("Disconnecting from the robot, then reconnecting.\n");
myRobot->disconnect();
myRobot->blockingConnect();
printf("Robot position now is:\n");
pose = myRobot->getPose();
pose.log();
break;
default:
printf("No test for second button.\n");
break;
}
}
}
int main( int argc, char **argv ){
// parse our args and make sure they were all accounted for
ArSimpleConnector connector(&argc, argv);
ArRobot robot;
ArSick sick;
double dist, angle = 0;
// Allow for esc to release robot
ArKeyHandler keyHandler;
Aria::setKeyHandler(&keyHandler);
robot.attachKeyHandler(&keyHandler);
printf("You may press escape to exit\n");
if( !connector.parseArgs() || argc > 1 ){
connector.logOptions();
exit(1);
}
// add the laser to the robot
robot.addRangeDevice(&sick);
// try to connect, if we fail exit
if( !connector.connectRobot(&robot) ){
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
// start the robot running, true so that if we lose connection the run stops
robot.runAsync(true);
// now set up the laser
connector.setupLaser(&sick);
sick.runAsync();
if( !sick.blockingConnect() ){
printf("Could not connect to SICK laser... exiting\n");
Aria::shutdown();
return 1;
}
robot.comInt(ArCommands::ENABLE, 1);
ArPose pose(0, -1000, 0);
robot.moveTo(pose);
ArPose prev_pose = robot.getPose();
double total_distance = 0;
printf("Connected\n");
ArUtil::sleep(1000);
PathLog log("../Data/reactive.dat");
int iterations_wo_movement = 0;
while( iterations_wo_movement < CONSECUTIVE_NON_MOTIONS ){
// Get updated measurement
sick.lockDevice();
dist = sick.currentReadingPolar(-90, 90, &angle);
sick.unlockDevice();
dist = (dist > 30000) ? 0 : dist - IDEAL_DISTANCE;
trackRobot(&robot, dist, angle);
ArUtil::sleep(500);
pose = robot.getPose();
log.write(pose);
total_distance += getDistance(prev_pose, pose);
prev_pose = pose;
// Determine if the robot is done tracking
isRobotTracking(&iterations_wo_movement, dist, angle);
}
ArUtil::sleep(1000);
log.close();
ofstream output;
output.open("../Data/reactive_dist.dat", ios::out | ios::trunc);
output << "Reactive 1 " << total_distance << endl;
output.close();
Aria::exit(0);
return 0;
}
void RosAriaNode::publish()
{
// Note, this is called via SensorInterpTask callback (myPublishCB, named "ROSPublishingTask"). ArRobot object 'robot' sholud not be locked or unlocked.
pos = robot->getPose();
tf::poseTFToMsg(tf::Transform(tf::createQuaternionFromYaw(pos.getTh()*M_PI/180), tf::Vector3(pos.getX()/1000,
pos.getY()/1000, 0)), position.pose.pose); //Aria returns pose in mm.
position.twist.twist.linear.x = robot->getVel()/1000; //Aria returns velocity in mm/s.
position.twist.twist.angular.z = robot->getRotVel()*M_PI/180;
position.header.frame_id = frame_id_odom;
position.child_frame_id = frame_id_base_link;
position.header.stamp = ros::Time::now();
pose_pub.publish(position);
ROS_DEBUG("RosAria: publish: (time %f) pose x: %f, y: %f, angle: %f; linear vel x: %f, y: %f; angular vel z: %f",
position.header.stamp.toSec(),
(double)position.pose.pose.position.x,
(double)position.pose.pose.position.y,
(double)position.pose.pose.orientation.w,
(double) position.twist.twist.linear.x,
(double) position.twist.twist.linear.y,
(double) position.twist.twist.angular.z
);
// publishing transform odom->base_link
odom_trans.header.stamp = ros::Time::now();
odom_trans.header.frame_id = frame_id_odom;
odom_trans.child_frame_id = frame_id_base_link;
odom_trans.transform.translation.x = pos.getX()/1000;
odom_trans.transform.translation.y = pos.getY()/1000;
odom_trans.transform.translation.z = 0.0;
odom_trans.transform.rotation = tf::createQuaternionMsgFromYaw(pos.getTh()*M_PI/180);
odom_broadcaster.sendTransform(odom_trans);
// getStallValue returns 2 bytes with stall bit and bumper bits, packed as (00 00 FrontBumpers RearBumpers)
int stall = robot->getStallValue();
unsigned char front_bumpers = (unsigned char)(stall >> 8);
unsigned char rear_bumpers = (unsigned char)(stall);
bumpers.header.frame_id = frame_id_bumper;
bumpers.header.stamp = ros::Time::now();
std::stringstream bumper_info(std::stringstream::out);
// Bit 0 is for stall, next bits are for bumpers (leftmost is LSB)
for (unsigned int i=0; i<robot->getNumFrontBumpers(); i++)
{
bumpers.front_bumpers[i] = (front_bumpers & (1 << (i+1))) == 0 ? 0 : 1;
bumper_info << " " << (front_bumpers & (1 << (i+1)));
}
ROS_DEBUG("RosAria: Front bumpers:%s", bumper_info.str().c_str());
bumper_info.str("");
// Rear bumpers have reverse order (rightmost is LSB)
unsigned int numRearBumpers = robot->getNumRearBumpers();
for (unsigned int i=0; i<numRearBumpers; i++)
{
bumpers.rear_bumpers[i] = (rear_bumpers & (1 << (numRearBumpers-i))) == 0 ? 0 : 1;
bumper_info << " " << (rear_bumpers & (1 << (numRearBumpers-i)));
}
ROS_DEBUG("RosAria: Rear bumpers:%s", bumper_info.str().c_str());
bumpers_pub.publish(bumpers);
//Publish battery information
// TODO: Decide if BatteryVoltageNow (normalized to (0,12)V) is a better option
std_msgs::Float64 batteryVoltage;
batteryVoltage.data = robot->getRealBatteryVoltageNow();
voltage_pub.publish(batteryVoltage);
if(robot->haveStateOfCharge())
{
std_msgs::Float32 soc;
soc.data = robot->getStateOfCharge()/100.0;
state_of_charge_pub.publish(soc);
}
// publish recharge state if changed
char s = robot->getChargeState();
if(s != recharge_state.data)
{
ROS_INFO("RosAria: publishing new recharge state %d.", s);
recharge_state.data = s;
recharge_state_pub.publish(recharge_state);
}
// publish motors state if changed
bool e = robot->areMotorsEnabled();
if(e != motors_state.data || !published_motors_state)
{
ROS_INFO("RosAria: publishing new motors state %d.", e);
motors_state.data = e;
motors_state_pub.publish(motors_state);
published_motors_state = true;
}
if (robot->areSonarsEnabled())
{
int i = 0;
int j = 0;
ArSensorReading* reading = NULL;
if(sonars__crossed_the_streams)
{
i = 8;
j = 8;
}
for(; i < 16; i++)
{
ranges.data[i].header.stamp = ros::Time::now();
ArSensorReading* _reading = NULL;
_reading = robot->getSonarReading(i-j);
ranges.data[i].range = _reading->getRange() / 1000.0f;
range_pub[i].publish(ranges.data[i]);
}
ranges.header.stamp = ros::Time::now();
combined_range_pub.publish(ranges);
}
}
void readPosition(ArRobot& robot){
ArPose pose = robot.getPose();
fseek(G_pose_fd, SEEK_SET, 0);
fprintf(G_pose_fd, "x=%0.6f;y=%0.6f;th=%0.6f;\n", pose.getX(), pose.getY(), pose.getTh());
}