int main(int argc, char **argv)
{
Aria::init();
ArRobot robot;
ArSerialConnection serialConnection;
ArTcpConnection tcpConnection;
if (tcpConnection.open("localhost", 8101)) {
robot.setDeviceConnection(&tcpConnection);
} else {
serialConnection.setPort("/dev/ttyUSB0");
robot.setDeviceConnection(&serialConnection);
}
robot.blockingConnect();
printf("Setting robot to run async\n");
robot.runAsync(false);
printf("Turning off sound\n");
robot.comInt(ArCommands::SOUNDTOG, 0);
printf("Enabling motors\n");
robot.enableMotors();
// add a set of actions that combine together to effect the wander behavior
/*ArActionStallRecover recover;
ArActionBumpers bumpers;
ArActionAvoidFront avoidFrontNear("Avoid Front Near", 225, 0);
ArActionAvoidFront avoidFrontFar;
ArActionConstantVelocity constantVelocity("Constant Velocity", 400);
robot.addAction(&recover, 100);
robot.addAction(&bumpers, 75);
robot.addAction(&avoidFrontNear, 50);
robot.addAction(&avoidFrontFar, 49);
robot.addAction(&constantVelocity, 25);*/
printf("Locking\n");
robot.lock();
robot.setVel(100.0);
robot.unlock();
printf("Sleeping\n");
ArUtil::sleep(3*1000);
printf("Awake\n");
// wait for robot task loop to end before exiting the program
//while (true);
//robot.waitForRunExit();
Aria::exit(0);
return 0;
}
int main(void)
{
int ret;
std::string str;
CBTest cbTest;
ArFunctorC<CBTest> connectCB(&cbTest, &CBTest::connected);
ArFunctorC<CBTest> failedConnectCB(&cbTest, &CBTest::failedConnect);
ArFunctorC<CBTest> disconnectCB(&cbTest, &CBTest::disconnected);
ArFunctorC<CBTest> disconnectErrorCB(&cbTest, &CBTest::disconnectedError);
ArSerialConnection con;
ArRobot robot;
printf("If a robot is attached to your port you should see:\n");
printf("Failed connect, Connected, Disconnected Error, Connected, Disconnected\n");
printf("If no robot is attached you should see:\n");
printf("Failed connect, Failed connect, Failed connect\n");
printf("-------------------------------------------------------\n");
ArLog::init(ArLog::None, ArLog::Terse);
srand(time(NULL));
robot.setDeviceConnection(&con);
robot.addConnectCB(&connectCB, ArListPos::FIRST);
robot.addFailedConnectCB(&failedConnectCB, ArListPos::FIRST);
robot.addDisconnectNormallyCB(&disconnectCB, ArListPos::FIRST);
robot.addDisconnectOnErrorCB(&disconnectErrorCB, ArListPos::FIRST);
// this should fail since there isn't an open port yet
robot.blockingConnect();
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
exit(0);
}
robot.blockingConnect();
con.close();
robot.loopOnce();
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
exit(0);
}
robot.blockingConnect();
robot.disconnect();
exit(0);
}
int main(void)
{
ArTcpConnection con;
ArRobot robot;
int ret;
std::string str;
JoydriveAction jdAct;
FillerThread ft;
ft.create();
FillerThread ft2;
ft2.create();
Aria::init();
/*
if (!jdAct.joystickInited())
{
printf("Do not have a joystick, set up the joystick then rerun the program\n\n");
Aria::shutdown();
return 1;
}
*/
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
robot.comInt(ArCommands::SONAR, 0);
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
lastLoopTime.setToNow();
loopTime = robot.getCycleTime();
robot.addAction(&jdAct, 100);
robot.runAsync(true);
robot.waitForRunExit();
Aria::shutdown();
return 0;
}
int main(int argc, char **argv)
{
std::string str;
int ret;
// connection to the robot
ArTcpConnection con;
// the robot
ArRobot robot;
// ake the joydrive object, which also creates its own thread
Joydrive joyd(&robot);
// the connection handler
ConnHandler ch(&robot, &joyd);
// init aria, which will make a dedicated signal handling thread
Aria::init(Aria::SIGHANDLE_THREAD);
// open the connection with default args, exit if it fails
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
// set the connection on the robot
robot.setDeviceConnection(&con);
// run the robot in its own thread
robot.runAsync(false);
// have the robot connect asyncronously (so its loop is still running)
// if this fails it means that the robot isn't running in its own thread
if (!robot.asyncConnect())
{
printf(
"asyncConnect failed because robot is not running in its own thread.\n");
Aria::shutdown();
return 1;
}
// now we just wait for the robot to be done running
printf("Waiting for the robot's run to exit.\n");
robot.waitForRunExit();
// then we exit
printf("exiting main\n");
Aria::exit(0); // exit program
return 0;
}
int main(int argc, char **argv)
{
std::string str;
int ret;
ArTime start;
// connection to the robot
ArSerialConnection con;
// the robot
ArRobot robot;
// the connection handler from above
ConnHandler ch(&robot);
// init area with a dedicated signal handling thread
Aria::init(Aria::SIGHANDLE_THREAD);
// open the connection with the defaults, exit if failed
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
// set the robots connection
robot.setDeviceConnection(&con);
// try to connect, if we fail, the connection handler should bail
if (!robot.blockingConnect())
{
// this should have been taken care of by the connection handler
// but just in case
printf(
"asyncConnect failed because robot is not running in its own thread.\n");
Aria::shutdown();
return 1;
}
// run the robot in its own thread, so it gets and processes packets and such
robot.runAsync(false);
int i;
while (Aria::getRunning())
{
robot.lock();
robot.comStr(ArCommands::TTY3, "1234567890");
robot.unlock();
}
robot.disconnect();
// shutdown and ge tout
Aria::shutdown();
return 0;
}
void SetupRobot(void)
{
puts("attempting to connect to robot");
RobotConnectoin.setPort("COM8");
RobotConnectoin.setBaud(9600);
robot.setDeviceConnection(&RobotConnectoin);
if(!robot.blockingConnect()){puts("not connected to robot");Aria::shutdown();}
robot.addRangeDevice(&sonarDev);
robot.addRangeDevice(&bumpers);
robot.enableMotors();
robot.enableSonar();
robot.requestEncoderPackets();
robot.setCycleChained(false);
// robot.setRotVelMax(robot.getRotVelMax());
}
int main()
{
ArModuleLoader::Status status;
ArSerialConnection con;
ArRobot robot;
int ret;
std::string str;
Aria::init();
status=ArModuleLoader::load("./joydriveActionMod", &robot);
printStatus(status);
if (status == ArModuleLoader::STATUS_INIT_FAILED)
return(1);
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
robot.comInt(ArCommands::SONAR, 0);
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
robot.run(true);
status=ArModuleLoader::close("./joydriveActionMod");
printStatus(status);
Aria::shutdown();
return 0;
}
int main(int argc, char **argv)
{
std::string str;
int ret;
ArTcpConnection con;
ArRobot robot;
ActionTest at1(-50, 333);
ActionTest at2(25, 666);
ActionTest at3(25, 0);
ActionTest at4(0, -999);
Aria::init();
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
robot.addAction(&at1, 100);
robot.addAction(&at2, 100);
robot.addAction(&at3, 100);
robot.addAction(&at4, 100);
robot.run(true);
Aria::shutdown();
return 0;
}
int main(void)
{
ArTcpConnection con;
ArRobot robot;
ArSonarDevice sonar;
int ret;
std::string str;
ArActionStallRecover recover;
ArActionConstantVelocity constantVelocity("Constant Velocity", 400);
Aria::init();
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.addRangeDevice(&sonar);
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
robot.addAction(&recover, 100);
robot.addAction(&constantVelocity, 25);
robot.run(true);
Aria::shutdown();
return 0;
}
int main(int argc, char **argv)
{
std::string str;
int ret;
int dist;
ArTime start;
ArPose startPose;
bool vel2 = false;
// connection to the robot
ArSerialConnection con;
// the robot
ArRobot robot;
// the connection handler from above
ConnHandler ch(&robot);
// init area with a dedicated signal handling thread
Aria::init(Aria::SIGHANDLE_THREAD);
if (argc != 2 || (dist = atoi(argv[1])) == 0)
{
printf("Usage: %s <distInMM>\n", argv[0]);
exit(0);
}
if (dist < 1000)
{
printf("You must go at least a meter\n");
exit(0);
}
// open the connection with the defaults, exit if failed
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
// set the robots connection
robot.setDeviceConnection(&con);
// try to connect, if we fail, the connection handler should bail
if (!robot.blockingConnect())
{
// this should have been taken care of by the connection handler
// but just in case
printf(
"asyncConnect failed because robot is not running in its own thread.\n");
Aria::shutdown();
return 1;
}
// run the robot in its own thread, so it gets and processes packets and such
robot.runAsync(false);
// just a big long set of printfs, direct motion commands and sleeps,
// it should be self-explanatory
robot.lock();
/*
robot.setAbsoluteMaxTransVel(2000);
robot.setTransVelMax(2000);
robot.setTransAccel(1000);
robot.setTransDecel(1000);
robot.comInt(82, 30); // rotkp
robot.comInt(83, 200); // rotkv
robot.comInt(84, 0); // rotki
robot.comInt(85, 30); // transkp
robot.comInt(86, 450); // transkv
robot.comInt(87, 4); // transki
*/
printf("Driving %d mm (going full speed for that far minus a meter then stopping)\n", dist);
if (vel2)
robot.setVel2(2200, 2200);
else
robot.setVel(2200);
robot.unlock();
start.setToNow();
startPose = robot.getPose();
while (1)
{
robot.lock();
printf("\r vel: %.0f x: %.0f y: %.0f: dist: %.0f heading: %.2f",
robot.getVel(), robot.getX(), robot.getY(),
startPose.findDistanceTo(robot.getPose()),
robot.getTh());
if (startPose.findDistanceTo(robot.getPose()) > abs(dist) - 1000)
{
printf("\nFinished distance\n");
robot.setVel(0);
robot.unlock();
break;
}
if (start.mSecSince() > 10000)
{
printf("\nDistance timed out\n");
robot.setVel(0);
robot.unlock();
break;
}
robot.unlock();
ArUtil::sleep(50);
}
if (vel2)
robot.setVel2(0, 0);
else
robot.setVel(0);
start.setToNow();
while (1)
{
robot.lock();
if (vel2)
robot.setVel2(0, 0);
else
robot.setVel(0);
if (fabs(robot.getVel()) < 20)
{
printf("Stopped\n");
robot.unlock();
break;
}
if (start.mSecSince() > 2000)
{
printf("\nStop timed out\n");
robot.unlock();
break;
}
robot.unlock();
ArUtil::sleep(50);
}
robot.lock();
robot.disconnect();
robot.unlock();
// shutdown and ge tout
Aria::shutdown();
return 0;
}
int main(int argc, char **argv)
{
bool done;
double distToTravel = 2300;
// whether to use the sim for the laser or not, if you use the sim
// for hte laser, you have to use the sim for the robot too
bool useSim = false;
// the laser
ArSick sick;
// connection
ArDeviceConnection *con;
// Laser connection
ArSerialConnection laserCon;
// robot
ArRobot robot;
// set a default filename
//std::string filename = "c:\\log\\1scans.2d";
std::string filename = "1scans.2d";
// see if we want to use a different filename
//if (argc > 1)
//Lfilename = argv[1];
printf("Logging to file %s\n", filename.c_str());
// start the logger with good values
sick.configureShort(useSim, ArSick::BAUD38400,
ArSick::DEGREES180, ArSick::INCREMENT_HALF);
ArSickLogger logger(&robot, &sick, 300, 25, filename.c_str());
// mandatory init
Aria::init();
// add it to the robot
robot.addRangeDevice(&sick);
//ArAnalogGyro gyro(&robot);
// if we're not using the sim, make a serial connection and set it up
if (!useSim)
{
ArSerialConnection *serCon;
serCon = new ArSerialConnection;
serCon->setPort();
//serCon->setBaud(38400);
con = serCon;
}
// if we are using the sim, set up a tcp connection
else
{
ArTcpConnection *tcpCon;
tcpCon = new ArTcpConnection;
tcpCon->setPort();
con = tcpCon;
}
// set the connection on the robot
robot.setDeviceConnection(con);
// try to connect, if we fail exit
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
// set up a key handler so escape exits and attach to the robot
ArKeyHandler keyHandler;
robot.attachKeyHandler(&keyHandler);
// run the robot, true here so that the run will exit if connection lost
robot.runAsync(true);
// if we're not using the sim, set up the port for the laser
if (!useSim)
{
laserCon.setPort(ArUtil::COM3);
sick.setDeviceConnection(&laserCon);
}
// now that we're connected to the robot, connect to the laser
sick.runAsync();
if (!sick.blockingConnect())
{
printf("Could not connect to SICK laser... exiting\n");
robot.disconnect();
Aria::shutdown();
return 1;
}
#ifdef WIN32
// wait until someone pushes the motor button to go
while (1)
{
robot.lock();
if (!robot.isRunning())
exit(0);
if (robot.areMotorsEnabled())
{
robot.unlock();
break;
}
robot.unlock();
ArUtil::sleep(100);
}
#endif
// basically from here on down the robot just cruises around a bit
robot.lock();
// enable the motors, disable amigobot sounds
robot.comInt(ArCommands::ENABLE, 1);
ArTime startTime;
// move a couple meters
robot.move(distToTravel);
robot.unlock();
startTime.setToNow();
do {
ArUtil::sleep(100);
robot.lock();
robot.setHeading(0);
done = robot.isMoveDone(60);
robot.unlock();
} while (!done);
/*
// rotate a few times
robot.lock();
robot.setVel(0);
robot.setRotVel(60);
robot.unlock();
ArUtil::sleep(12000);
*/
robot.lock();
robot.setHeading(180);
robot.unlock();
do {
ArUtil::sleep(100);
robot.lock();
robot.setHeading(180);
done = robot.isHeadingDone();
robot.unlock();
} while (!done);
// move a couple meters
robot.lock();
robot.move(distToTravel);
robot.unlock();
startTime.setToNow();
do {
ArUtil::sleep(100);
robot.lock();
robot.setHeading(180);
done = robot.isMoveDone(60);
robot.unlock();
} while (!done);
robot.lock();
robot.setHeading(0);
robot.setVel(0);
robot.unlock();
startTime.setToNow();
do {
ArUtil::sleep(100);
robot.lock();
robot.setHeading(0);
done = robot.isHeadingDone();
robot.unlock();
} while (!done);
sick.lockDevice();
sick.disconnect();
sick.unlockDevice();
robot.lock();
robot.disconnect();
robot.unlock();
// now exit
Aria::shutdown();
return 0;
}
int main(int argc, char **argv)
{
std::string str;
int ret;
int successes = 0, failures = 0;
int action;
bool exitOnFailure = true;
ArSerialConnection con;
ArRobot robot;
//ArLog::init(ArLog::StdOut, ArLog::Verbose);
srand(time(NULL));
robot.runAsync(false);
// if (!exitOnFailure)
// ArLog::init(ArLog::None, ArLog::Terse);
//else
//ArLog::init(ArLog::None);
while (1)
{
if (con.getStatus() != ArDeviceConnection::STATUS_OPEN &&
(ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
++failures;
if (exitOnFailure)
{
printf("Failed\n");
exit(0);
}
else
{
ArUtil::sleep(200);
robot.unlock();
continue;
}
}
robot.lock();
robot.setDeviceConnection(&con);
robot.unlock();
ArUtil::sleep((rand() % 5) * 100);
if (robot.asyncConnect())
{
robot.waitForConnectOrConnFail();
robot.lock();
if (!robot.isConnected())
{
if (exitOnFailure)
{
printf("Failed after %d tries.\n", successes);
exit(0);
}
printf("Failed to connect successfully");
++failures;
}
robot.comInt(ArCommands::SONAR, 0);
robot.comInt(ArCommands::SOUNDTOG, 0);
//robot.comInt(ArCommands::PLAYLIST, 0);
robot.comInt(ArCommands::ENCODER, 1);
ArUtil::sleep(((rand() % 20) + 3) * 100);
++successes;
// okay, now try to leave it in a messed up state
action = rand() % 8;
robot.dropConnection();
switch (action) {
case 0:
printf("Discon 0 ");
robot.disconnect();
ArUtil::sleep(100);
robot.com(0);
break;
case 1:
printf("Discon 1 ");
robot.disconnect();
ArUtil::sleep(100);
robot.com(0);
ArUtil::sleep(100);
robot.com(1);
break;
case 2:
printf("Discon 2 ");
robot.disconnect();
ArUtil::sleep(100);
robot.com(0);
ArUtil::sleep(100);
robot.com(1);
ArUtil::sleep(100);
robot.com(2);
break;
case 3:
printf("Discon 10 ");
robot.disconnect();
ArUtil::sleep(100);
robot.com(10);
break;
case 4:
printf("Discon ");
robot.disconnect();
break;
default:
printf("Leave ");
break;
}
robot.unlock();
}
else
{
if (exitOnFailure)
{
printf("Failed after %d tries.\n", successes);
exit(0);
}
printf("Failed to start connect ");
++failures;
}
if ((rand() % 2) == 0)
{
printf(" ! RadioDisconnect ! ");
con.write("|||\15", strlen("!!!\15"));
ArUtil::sleep(100);
con.write("WMD\15", strlen("WMD\15"));
ArUtil::sleep(200);
}
if ((rand() % 2) == 0)
{
printf(" ! ClosePort !\n");
con.close();
}
else
printf("\n");
printf("#### %d successes %d failures, %% %.2f success\n", successes, failures,
(float)successes/(float)(successes+failures)*100);
ArUtil::sleep((rand() % 2)* 1000);
}
return 0;
}
int main(int argc, char **argv)
{
int ret;
std::string str;
// the serial connection (robot)
ArSerialConnection serConn;
// tcp connection (sim)
ArTcpConnection tcpConn;
// the robot
ArRobot robot;
// the laser
ArSick sick;
// the laser connection
ArSerialConnection laserCon;
bool useSimForLaser = false;
std::string hostname = "prod.local.net";
// timeouts in minutes
int wanderTime = 0;
int restTime = 0;
// check arguments
if (argc == 3 || argc == 4)
{
wanderTime = atoi(argv[1]);
restTime = atoi(argv[2]);
if (argc == 4)
hostname = argv[3];
}
else
{
printf("\nUsage:\n\tpeoplebotTest <wanderTime> <restTime> <hostname>\n\n");
printf("Times are in minutes. Hostname is the machine to pipe the ACTS display to\n\n");
wanderTime = 15;
restTime = 45;
}
printf("Wander time - %d minutes\nRest time - %d minutes\n", wanderTime, restTime);
printf("Sending display to %s.\n\n", hostname.c_str());
// sonar, must be added to the robot
ArSonarDevice sonar;
// the actions we'll use to wander
ArActionStallRecover recover;
ArActionBumpers bumpers;
ArActionAvoidFront avoidFrontNear("Avoid Front Near", 225, 0);
ArActionAvoidFront avoidFrontFar;
// Make a key handler, so that escape will shut down the program
// cleanly
ArKeyHandler keyHandler;
// mandatory init
Aria::init();
// Add the key handler to Aria so other things can find it
Aria::setKeyHandler(&keyHandler);
// Attach the key handler to a robot now, so that it actually gets
// some processing time so it can work, this will also make escape
// exit
robot.attachKeyHandler(&keyHandler);
// First we see if we can open the tcp connection, if we can we'll
// assume we're connecting to the sim, and just go on... if we
// can't open the tcp it means the sim isn't there, so just try the
// robot
// modify this next line if you're not using default tcp connection
tcpConn.setPort();
// see if we can get to the simulator (true is success)
if (tcpConn.openSimple())
{
// we could get to the sim, so set the robots device connection to the sim
printf("Connecting to simulator through tcp.\n");
robot.setDeviceConnection(&tcpConn);
}
else
{
// we couldn't get to the sim, so set the port on the serial
// connection and then set the serial connection as the robots
// device
// modify the next line if you're not using the first serial port
// to talk to your robot
serConn.setPort();
printf(
"Could not connect to simulator, connecting to robot through serial.\n");
robot.setDeviceConnection(&serConn);
}
// add the sonar to the robot
robot.addRangeDevice(&sonar);
// add the laser
robot.addRangeDevice(&sick);
// try to connect, if we fail exit
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
// turn on the motors, turn off amigobot sounds
//robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
// turn off the sonar to start with
robot.comInt(ArCommands::SONAR, 0);
// add the actions
robot.addAction(&recover, 100);
robot.addAction(&bumpers, 75);
robot.addAction(&avoidFrontNear, 50);
robot.addAction(&avoidFrontFar, 49);
// start the robot running, true so that if we lose connection the run stops
robot.runAsync(true);
if (!useSimForLaser)
{
sick.setDeviceConnection(&laserCon);
if ((ret = laserCon.open("/dev/ttyS2")) != 0)
{
str = tcpConn.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
sick.configureShort(false);
}
else
{
sick.configureShort(true);
}
sick.runAsync();
if (!sick.blockingConnect())
{
printf("Could not connect to SICK laser... exiting\n");
Aria::shutdown();
return 1;
}
robot.lock();
robot.comInt(ArCommands::ENABLE, 1);
robot.unlock();
// add the peoplebot test
PeoplebotTest pbTest(&robot, wanderTime, restTime, hostname);
robot.waitForRunExit();
// now exit
Aria::shutdown();
return 0;
}
int main(int argc, char **argv)
{
std::string str;
int ret;
ArTime start;
// connection to the robot
ArSerialConnection con;
// the robot
ArRobot robot;
// the connection handler from above
ConnHandler ch(&robot);
// init area with a dedicated signal handling thread
Aria::init(Aria::SIGHANDLE_THREAD);
// open the connection with the defaults, exit if failed
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
// set the robots connection
robot.setDeviceConnection(&con);
// try to connect, if we fail, the connection handler should bail
if (!robot.blockingConnect())
{
// this should have been taken care of by the connection handler
// but just in case
printf(
"asyncConnect failed because robot is not running in its own thread.\n");
Aria::shutdown();
return 1;
}
// run the robot in its own thread, so it gets and processes packets and such
robot.runAsync(false);
// just a big long set of printfs, direct motion commands and sleeps,
// it should be self-explanatory
printf("Telling the robot to go 300 mm for 5 seconds\n");
robot.lock();
robot.setVel(500);
robot.unlock();
start.setToNow();
while (1)
{
robot.lock();
if (start.mSecSince() > 5000)
{
robot.unlock();
break;
}
printf("Trans: %10g Rot: %10g\n", robot.getVel(), robot.getRotVel());
robot.unlock();
ArUtil::sleep(100);
}
printf("Telling the robot to turn at 50 deg/sec for 10 seconds\n");
robot.lock();
robot.setVel(0);
robot.setRotVel(50);
robot.unlock();
start.setToNow();
while (1)
{
robot.lock();
if (start.mSecSince() > 10000)
{
robot.unlock();
break;
}
printf("Trans: %10g Rot: %10g\n", robot.getVel(), robot.getRotVel());
robot.unlock();
ArUtil::sleep(100);
}
printf("Telling the robot to turn at 100 deg/sec for 10 seconds\n");
robot.lock();
robot.setVel(0);
robot.setRotVel(100);
robot.unlock();
start.setToNow();
while (1)
{
robot.lock();
if (start.mSecSince() > 10000)
{
robot.unlock();
break;
}
printf("Trans: %10g Rot: %10g\n", robot.getVel(), robot.getRotVel());
robot.unlock();
ArUtil::sleep(100);
}
printf("Done with tests, exiting\n");
robot.disconnect();
// shutdown and ge tout
Aria::shutdown();
return 0;
}
int main(void)
{
ArSerialConnection con;
ArRobot robot;
int ret;
std::string str;
ArActionLimiterForwards limiter("speed limiter near", 225, 600, 250);
ArActionLimiterForwards limiterFar("speed limiter far", 225, 1100, 400);
ArActionTableSensorLimiter tableLimiter;
ArActionLimiterBackwards backwardsLimiter;
ArActionConstantVelocity stop("stop", 0);
ArSonarDevice sonar;
ArACTS_1_2 acts;
ArPTZ *ptz;
ptz = new ArVCC4(&robot, true);
ArGripper gripper(&robot);
Acquire acq(&acts, &gripper);
DriveTo driveTo(&acts, &gripper, ptz);
DropOff dropOff(&acts, &gripper, ptz);
PickUp pickUp(&acts, &gripper, ptz);
TakeBlockToWall takeBlock(&robot, &gripper, ptz, &acq, &driveTo, &pickUp,
&dropOff, &tableLimiter);
if (!acts.openPort(&robot))
{
printf("Could not connect to acts, exiting\n");
exit(0);
}
Aria::init();
robot.addRangeDevice(&sonar);
//con.setBaud(38400);
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
ptz->init();
ArUtil::sleep(8000);
printf("### 2222\n");
ptz->panTilt(0, -40);
printf("### whee\n");
ArUtil::sleep(8000);
robot.setAbsoluteMaxTransVel(400);
robot.setStateReflectionRefreshTime(250);
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
ArUtil::sleep(200);
robot.addAction(&tableLimiter, 100);
robot.addAction(&limiter, 99);
robot.addAction(&limiterFar, 98);
robot.addAction(&backwardsLimiter, 97);
robot.addAction(&acq, 77);
robot.addAction(&driveTo, 76);
robot.addAction(&pickUp, 75);
robot.addAction(&dropOff, 74);
robot.addAction(&stop, 30);
robot.run(true);
Aria::shutdown();
return 0;
}
int main(int argc, char **argv)
{
int ret; //Don't know what this variable is for
ArRobot robot;// Robot object
ArSick sick; // Laser scanner
ArSerialConnection laserCon; // Scanner connection
ArSerialConnection con; // Robot connection
std::string str; // Standard output
// sonar, must be added to the robot
ArSonarDevice sonar;
// the actions we'll use to wander
// recover from stalls
ArActionStallRecover recover;
// react to bumpers
ArActionBumpers bumpers;
// limiter for close obstacles
ArActionLimiterForwards limiter("speed limiter near", 300, 600, 250, 1.1);
// limiter for far away obstacles
ArActionLimiterForwards limiterFar("speed limiter far", 300, 1100, 600, 1.1);
// limiter for the table sensors
ArActionLimiterTableSensor tableLimiter;
// actually move the robot
ArActionConstantVelocity constantVelocity("Constant Velocity", 400);
// turn the orbot if its slowed down
ArActionTurn turn;
// mandatory init
Aria::init();
// Parse all our args
ArSimpleConnector connector(&argc, argv);
connector.parseArgs();
if (argc > 1)
{
connector.logOptions();
exit(1);
}
// add the sonar to the robot
robot.addRangeDevice(&sonar);
// add the laser to the robot
robot.addRangeDevice(&sick);
// NOTE: HARDCODED USB PORT!
// Attempt to open hard-coded USB to robot
if ((ret = con.open("/dev/ttyUSB2")) != 0){
// If connection fails, exit
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
// set the robot to use the given connection
robot.setDeviceConnection(&con);
// do a blocking connect, if it fails exit
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
// turn on the motors, turn off amigobot sounds
//robot.comInt(ArCommands::SONAR, 0);
robot.comInt(ArCommands::SOUNDTOG, 0);
// start the robot running, true so that if we lose connection the run stops
robot.runAsync(true);
// Attempt to connect to SICK using another hard-coded USB connection
sick.setDeviceConnection(&laserCon);
if((ret=laserCon.open("/dev/ttyUSB3")) !=0) {
//If connection fails, shutdown
Aria::shutdown();
return 1;
}
//Configure the SICK
sick.configureShort(false,/*not using sim*/ArSick::BAUD38400,ArSick::DEGREES180,ArSick::INCREMENT_HALF);
//Run the sick
sick.runAsync();
// Presumably test to make sure that the connection is good
if(!sick.blockingConnect()){
printf("Could not get sick...exiting\n");
Aria::shutdown();
return 1;
}
printf("We are connected to the laser!");
/*
robot.lock();
robot.comInt(ArCommands::ENABLE, 1);
robot.unlock();
*/
int range [361] = {0};
int drange [360] = {0};
int i = 0;
int obj_range [2];
int old_range [360]={0};
clock_t now, prev;
while(1){
range [361] = {0};
drange [360] = {0};
i = 0;
obj_range[2];
std::list<ArSensorReading *> *readings;
std::list<ArSensorReading *>::iterator it;
sick.lockDevice();
readings=(list<ArSensorReading *,allocator<ArSensorReading *> > *)sick.getRawReadings();
if(NULL!=readings){
if ((readings->end() != readings->begin())){
for (it = readings->begin(); it!= readings->end(); it++){
// std::cout << (*it)->getRange()<<" ";
range[i] = ((*it)->getRange());
if(i){
drange[i-1] = range[i] - range[i-1];
printf("%f %i %i\r\n", (float)i/2.0, range[i], drange[i-1]);
}
i++;
}
int i = 0;
//detect the object range
while (i < 360) {
if (range[i]>Default_Distance + alpha) {
;
} else {
if (obj_range[0]=0)
obj_range[0]=i;
else
obj_range[1]=i;
}
}
if (!now)
prev=now;
now=clock();
duration=now-prev;
/******moving straight*******/
float speed = avg_speed(obj_range,old_range,range,(float)duration)
/*while(i < 360){
int r_edge = 0;
int l_edge = 0;
float obsticle_degree = 0;
if(drange[i] > D_DISTANCE){
r_edge = i;
while(drange[i] > -(D_DISTANCE)){
i++;
}
l_edge = i;
obsticle_degree = (r_edge + (l_edge - r_edge)/2.0)/2.0;
printf("\r\n object detected at %f\r\n", obsticle_degree);
}
std::cout<<std::endl;
}*/
}
else{
std::cout << "(readings->end() == readings -> begin())" << std::endl;
}
}
else{
int main(void)
{
// The connection we'll use to talk to the robot
ArTcpConnection con;
// the robot
ArRobot robot;
// the sonar device
ArSonarDevice sonar;
// some stuff for return values
int ret;
std::string str;
// the behaviors from above, and a stallRecover behavior that uses defaults
ActionGo go(500, 350);
ActionTurn turn(400, 30);
ArActionStallRecover recover;
// this needs to be done
Aria::init();
// open the connection, just using the defaults, if it fails, exit
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
// add the range device to the robot, you should add all the range
// devices and such before you add actions
robot.addRangeDevice(&sonar);
// set the robot to use the given connection
robot.setDeviceConnection(&con);
// do a blocking connect, if it fails exit
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
// enable the motors, disable amigobot sounds
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
// add our actions in a good order, the integer here is the priority,
// with higher priority actions going first
robot.addAction(&recover, 100);
robot.addAction(&go, 50);
robot.addAction(&turn, 49);
// run the robot, the true here is to exit if it loses connection
robot.run(true);
// now just shutdown and go away
Aria::shutdown();
return 0;
}
int main(void)
{
ArSerialConnection con;
ArRobot robot;
int ret;
std::string str;
ArActionLimiterForwards limiter("speed limiter near", 300, 600, 250);
ArActionLimiterForwards limiterFar("speed limiter far", 300, 1100, 400);
ArActionLimiterBackwards backwardsLimiter;
ArActionConstantVelocity stop("stop", 0);
ArActionConstantVelocity backup("backup", -200);
ArSonarDevice sonar;
ArACTS_1_2 acts;
ArSonyPTZ sony(&robot);
ArGripper gripper(&robot, ArGripper::GENIO);
Acquire acq(&acts, &gripper);
DriveTo driveTo(&acts, &gripper, &sony);
PickUp pickUp(&acts, &gripper, &sony);
TakeBlockToWall takeBlock(&robot, &gripper, &sony, &acq, &driveTo, &pickUp,
&backup);
Aria::init();
if (!acts.openPort(&robot))
{
printf("Could not connect to acts\n");
exit(1);
}
robot.addRangeDevice(&sonar);
//con.setBaud(38400);
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
sony.init();
ArUtil::sleep(1000);
//robot.setAbsoluteMaxTransVel(400);
robot.setStateReflectionRefreshTime(250);
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
ArUtil::sleep(200);
robot.addAction(&limiter, 100);
robot.addAction(&limiterFar, 99);
robot.addAction(&backwardsLimiter, 98);
robot.addAction(&acq, 77);
robot.addAction(&driveTo, 76);
robot.addAction(&pickUp, 75);
robot.addAction(&backup, 50);
robot.addAction(&stop, 30);
robot.run(true);
Aria::shutdown();
return 0;
}
