bool GrDrawTarget::setupDstReadIfNecessary(const GrPipelineBuilder& pipelineBuilder,
const GrProcOptInfo& colorPOI,
const GrProcOptInfo& coveragePOI,
GrDeviceCoordTexture* dstCopy,
const SkRect* drawBounds) {
if (!pipelineBuilder.willXPNeedDstCopy(*this->caps(), colorPOI, coveragePOI)) {
return true;
}
SkIRect copyRect;
GrRenderTarget* rt = pipelineBuilder.getRenderTarget();
pipelineBuilder.clip().getConservativeBounds(rt, ©Rect);
if (drawBounds) {
SkIRect drawIBounds;
drawBounds->roundOut(&drawIBounds);
if (!copyRect.intersect(drawIBounds)) {
#ifdef SK_DEBUG
SkDebugf("Missed an early reject. Bailing on draw from setupDstReadIfNecessary.\n");
#endif
return false;
}
} else {
#ifdef SK_DEBUG
//SkDebugf("No dev bounds when dst copy is made.\n");
#endif
}
// MSAA consideration: When there is support for reading MSAA samples in the shader we could
// have per-sample dst values by making the copy multisampled.
GrSurfaceDesc desc;
this->initCopySurfaceDstDesc(rt, &desc);
desc.fWidth = copyRect.width();
desc.fHeight = copyRect.height();
SkAutoTUnref<GrTexture> copy(
fContext->refScratchTexture(desc, GrContext::kApprox_ScratchTexMatch));
if (!copy) {
SkDebugf("Failed to create temporary copy of destination texture.\n");
return false;
}
SkIPoint dstPoint = {0, 0};
if (this->copySurface(copy, rt, copyRect, dstPoint)) {
dstCopy->setTexture(copy);
dstCopy->setOffset(copyRect.fLeft, copyRect.fTop);
return true;
} else {
return false;
}
}
bool GrDrawTarget::setupDstReadIfNecessary(const GrPipelineBuilder& pipelineBuilder,
const GrPipelineOptimizations& optimizations,
GrXferProcessor::DstTexture* dstTexture,
const SkRect& batchBounds) {
SkRect bounds = batchBounds;
bounds.outset(0.5f, 0.5f);
if (!pipelineBuilder.willXPNeedDstTexture(*this->caps(), optimizations)) {
return true;
}
GrRenderTarget* rt = pipelineBuilder.getRenderTarget();
if (this->caps()->textureBarrierSupport()) {
if (GrTexture* rtTex = rt->asTexture()) {
// The render target is a texture, so we can read from it directly in the shader. The XP
// will be responsible to detect this situation and request a texture barrier.
dstTexture->setTexture(rtTex);
dstTexture->setOffset(0, 0);
return true;
}
}
SkIRect copyRect;
pipelineBuilder.clip().getConservativeBounds(rt->width(), rt->height(), ©Rect);
SkIRect drawIBounds;
bounds.roundOut(&drawIBounds);
if (!copyRect.intersect(drawIBounds)) {
#ifdef SK_DEBUG
GrCapsDebugf(this->caps(), "Missed an early reject. "
"Bailing on draw from setupDstReadIfNecessary.\n");
#endif
return false;
}
// MSAA consideration: When there is support for reading MSAA samples in the shader we could
// have per-sample dst values by making the copy multisampled.
GrSurfaceDesc desc;
if (!fGpu->initCopySurfaceDstDesc(rt, &desc)) {
desc.fOrigin = kDefault_GrSurfaceOrigin;
desc.fFlags = kRenderTarget_GrSurfaceFlag;
desc.fConfig = rt->config();
}
desc.fWidth = copyRect.width();
desc.fHeight = copyRect.height();
static const uint32_t kFlags = 0;
SkAutoTUnref<GrTexture> copy(fResourceProvider->createApproxTexture(desc, kFlags));
if (!copy) {
SkDebugf("Failed to create temporary copy of destination texture.\n");
return false;
}
SkIPoint dstPoint = {0, 0};
this->copySurface(copy, rt, copyRect, dstPoint);
dstTexture->setTexture(copy);
dstTexture->setOffset(copyRect.fLeft, copyRect.fTop);
return true;
}
////////////////////////////////////////////////////////////////////////////////
// sort out what kind of clip mask needs to be created: alpha, stencil,
// scissor, or entirely software
bool GrClipMaskManager::setupClipping(const GrPipelineBuilder& pipelineBuilder,
GrPipelineBuilder::AutoRestoreStencil* ars,
GrScissorState* scissorState,
const SkRect* devBounds,
GrAppliedClip* out) {
if (kRespectClip_StencilClipMode == fClipMode) {
fClipMode = kIgnoreClip_StencilClipMode;
}
GrReducedClip::ElementList elements(16);
int32_t genID = 0;
GrReducedClip::InitialState initialState = GrReducedClip::kAllIn_InitialState;
SkIRect clipSpaceIBounds;
bool requiresAA = false;
GrRenderTarget* rt = pipelineBuilder.getRenderTarget();
// GrDrawTarget should have filtered this for us
SkASSERT(rt);
SkIRect clipSpaceRTIBounds = SkIRect::MakeWH(rt->width(), rt->height());
const GrClip& clip = pipelineBuilder.clip();
if (clip.isWideOpen(clipSpaceRTIBounds)) {
this->setPipelineBuilderStencil(pipelineBuilder, ars);
return true;
}
// The clip mask manager always draws with a single IRect so we special case that logic here
// Image filters just use a rect, so we also special case that logic
switch (clip.clipType()) {
case GrClip::kWideOpen_ClipType:
SkFAIL("Should have caught this with clip.isWideOpen()");
return true;
case GrClip::kIRect_ClipType: {
SkIRect scissor = clip.irect();
if (scissor.intersect(clipSpaceRTIBounds)) {
scissorState->set(scissor);
this->setPipelineBuilderStencil(pipelineBuilder, ars);
return true;
}
return false;
}
case GrClip::kClipStack_ClipType: {
clipSpaceRTIBounds.offset(clip.origin());
GrReducedClip::ReduceClipStack(*clip.clipStack(),
clipSpaceRTIBounds,
&elements,
&genID,
&initialState,
&clipSpaceIBounds,
&requiresAA);
if (elements.isEmpty()) {
if (GrReducedClip::kAllIn_InitialState == initialState) {
if (clipSpaceIBounds == clipSpaceRTIBounds) {
this->setPipelineBuilderStencil(pipelineBuilder, ars);
return true;
}
} else {
return false;
}
}
} break;
}
// An element count of 4 was chosen because of the common pattern in Blink of:
// isect RR
// diff RR
// isect convex_poly
// isect convex_poly
// when drawing rounded div borders. This could probably be tuned based on a
// configuration's relative costs of switching RTs to generate a mask vs
// longer shaders.
if (elements.count() <= kMaxAnalyticElements) {
SkVector clipToRTOffset = { SkIntToScalar(-clip.origin().fX),
SkIntToScalar(-clip.origin().fY) };
// When there are multiple color samples we want to do per-sample clipping, not compute
// a fractional pixel coverage.
bool disallowAnalyticAA = pipelineBuilder.getRenderTarget()->isUnifiedMultisampled();
const GrFragmentProcessor* clipFP = nullptr;
if (elements.isEmpty() ||
(requiresAA && !disallowAnalyticAA &&
SkToBool(clipFP = this->getAnalyticClipProcessor(elements, clipToRTOffset, devBounds)))) {
SkIRect scissorSpaceIBounds(clipSpaceIBounds);
scissorSpaceIBounds.offset(-clip.origin());
if (nullptr == devBounds ||
!SkRect::Make(scissorSpaceIBounds).contains(*devBounds)) {
scissorState->set(scissorSpaceIBounds);
}
this->setPipelineBuilderStencil(pipelineBuilder, ars);
out->fClipCoverageFP.reset(clipFP);
return true;
}
}
// If MSAA is enabled we can do everything in the stencil buffer.
if (0 == rt->numStencilSamples() && requiresAA) {
SkAutoTUnref<GrTexture> result;
// The top-left of the mask corresponds to the top-left corner of the bounds.
SkVector clipToMaskOffset = {
SkIntToScalar(-clipSpaceIBounds.fLeft),
SkIntToScalar(-clipSpaceIBounds.fTop)
};
if (this->useSWOnlyPath(pipelineBuilder, clipToMaskOffset, elements)) {
// The clip geometry is complex enough that it will be more efficient to create it
// entirely in software
result.reset(this->createSoftwareClipMask(genID,
initialState,
elements,
clipToMaskOffset,
clipSpaceIBounds));
} else {
result.reset(this->createAlphaClipMask(genID,
initialState,
elements,
clipToMaskOffset,
clipSpaceIBounds));
}
if (result) {
// The mask's top left coord should be pinned to the rounded-out top left corner of
// clipSpace bounds. We determine the mask's position WRT to the render target here.
SkIRect rtSpaceMaskBounds = clipSpaceIBounds;
rtSpaceMaskBounds.offset(-clip.origin());
out->fClipCoverageFP.reset(create_fp_for_mask(result, rtSpaceMaskBounds));
this->setPipelineBuilderStencil(pipelineBuilder, ars);
return true;
}
// if alpha clip mask creation fails fall through to the non-AA code paths
}
// use the stencil clip if we can't represent the clip as a rectangle.
SkIPoint clipSpaceToStencilSpaceOffset = -clip.origin();
this->createStencilClipMask(rt,
genID,
initialState,
elements,
clipSpaceIBounds,
clipSpaceToStencilSpaceOffset);
// This must occur after createStencilClipMask. That function may change the scissor. Also, it
// only guarantees that the stencil mask is correct within the bounds it was passed, so we must
// use both stencil and scissor test to the bounds for the final draw.
SkIRect scissorSpaceIBounds(clipSpaceIBounds);
scissorSpaceIBounds.offset(clipSpaceToStencilSpaceOffset);
scissorState->set(scissorSpaceIBounds);
this->setPipelineBuilderStencil(pipelineBuilder, ars);
return true;
}
