void paintSkiaText(GraphicsContext* context,
HFONT hfont,
int numGlyphs,
const WORD* glyphs,
const int* advances,
const GOFFSET* offsets,
const SkPoint* origin)
{
HDC dc = GetDC(0);
HGDIOBJ oldFont = SelectObject(dc, hfont);
PlatformContextSkia* platformContext = context->platformContext();
SkCanvas* canvas = platformContext->canvas();
TextDrawingModeFlags textMode = platformContext->getTextDrawingMode();
// If platformContext is GPU-backed make its GL context current.
platformContext->makeGrContextCurrent();
// Filling (if necessary). This is the common case.
SkPaint paint;
platformContext->setupPaintForFilling(&paint);
paint.setTextEncoding(SkPaint::kGlyphID_TextEncoding);
setupPaintForFont(hfont, &paint, platformContext);
bool didFill = false;
if ((textMode & TextModeFill) && (SkColorGetA(paint.getColor()) || paint.getLooper())) {
skiaDrawText(canvas, *origin, &paint, &glyphs[0], &advances[0], &offsets[0], numGlyphs);
didFill = true;
}
// Stroking on top (if necessary).
if ((textMode & TextModeStroke)
&& platformContext->getStrokeStyle() != NoStroke
&& platformContext->getStrokeThickness() > 0) {
paint.reset();
platformContext->setupPaintForStroking(&paint, 0, 0);
paint.setTextEncoding(SkPaint::kGlyphID_TextEncoding);
setupPaintForFont(hfont, &paint, platformContext);
if (didFill) {
// If there is a shadow and we filled above, there will already be
// a shadow. We don't want to draw it again or it will be too dark
// and it will go on top of the fill.
//
// Note that this isn't strictly correct, since the stroke could be
// very thick and the shadow wouldn't account for this. The "right"
// thing would be to draw to a new layer and then draw that layer
// with a shadow. But this is a lot of extra work for something
// that isn't normally an issue.
paint.setLooper(0);
}
skiaDrawText(canvas, *origin, &paint, &glyphs[0], &advances[0], &offsets[0], numGlyphs);
}
SelectObject(dc, oldFont);
ReleaseDC(0, dc);
}
static bool fold_opacity_layer_color_to_paint(const SkPaint& layerPaint,
bool isSaveLayer,
SkPaint* paint) {
// We assume layerPaint is always from a saveLayer. If isSaveLayer is
// true, we assume paint is too.
// The alpha folding can proceed if the filter layer paint does not have properties which cause
// the resulting filter layer to be "blended" in complex ways to the parent layer. For example,
// looper drawing unmodulated filter layer twice and then modulating the result produces
// different image to drawing modulated filter layer twice.
// TODO: most likely the looper and only some xfer modes are the hard constraints
if (paint->getXfermode() || paint->getLooper()) {
return false;
}
if (!isSaveLayer && paint->getImageFilter()) {
// For normal draws, the paint color is used as one input for the color for the draw. Image
// filter will operate on the result, and thus we can not change the input.
// For layer saves, the image filter is applied to the layer contents. The layer is then
// modulated with the paint color, so it's fine to proceed with the fold for saveLayer
// paints with image filters.
return false;
}
if (paint->getColorFilter()) {
// Filter input depends on the paint color.
// Here we could filter the color if we knew the draw is going to be uniform color. This
// should be detectable as drawPath/drawRect/.. without a shader being uniform, while
// drawBitmap/drawSprite or a shader being non-uniform. However, current matchers don't
// give the type out easily, so just do not optimize that at the moment.
return false;
}
const uint32_t layerColor = layerPaint.getColor();
// The layer paint color must have only alpha component.
if (SK_ColorTRANSPARENT != SkColorSetA(layerColor, SK_AlphaTRANSPARENT)) {
return false;
}
// The layer paint can not have any effects.
if (layerPaint.getPathEffect() ||
layerPaint.getShader() ||
layerPaint.getXfermode() ||
layerPaint.getMaskFilter() ||
layerPaint.getColorFilter() ||
layerPaint.getRasterizer() ||
layerPaint.getLooper() ||
layerPaint.getImageFilter()) {
return false;
}
paint->setAlpha(SkMulDiv255Round(paint->getAlpha(), SkColorGetA(layerColor)));
return true;
}
static bool HasAnyEffect(const SkPaint& paint) {
return paint.getPathEffect() ||
paint.getShader() ||
paint.getXfermode() ||
paint.getMaskFilter() ||
paint.getColorFilter() ||
paint.getRasterizer() ||
paint.getLooper() ||
paint.getImageFilter();
}
// Is the supplied paint simply a color?
static bool is_simple(const SkPaint& p) {
return NULL == p.getPathEffect() &&
NULL == p.getShader() &&
NULL == p.getXfermode() &&
NULL == p.getMaskFilter() &&
NULL == p.getColorFilter() &&
NULL == p.getRasterizer() &&
NULL == p.getLooper() &&
NULL == p.getImageFilter();
}
void paintSkiaText(GraphicsContext* context,
HFONT hfont,
int numGlyphs,
const WORD* glyphs,
const int* advances,
const GOFFSET* offsets,
const SkPoint* origin)
{
PlatformContextSkia* platformContext = context->platformContext();
SkCanvas* canvas = platformContext->canvas();
TextDrawingModeFlags textMode = platformContext->getTextDrawingMode();
// Ensure font load for printing, because PDF device needs it.
if (canvas->getTopDevice()->getDeviceCapabilities() & SkDevice::kVector_Capability)
PlatformSupport::ensureFontLoaded(hfont);
// Filling (if necessary). This is the common case.
SkPaint paint;
platformContext->setupPaintForFilling(&paint);
paint.setTextEncoding(SkPaint::kGlyphID_TextEncoding);
setupPaintForFont(hfont, &paint, platformContext);
bool didFill = false;
if ((textMode & TextModeFill) && (SkColorGetA(paint.getColor()) || paint.getLooper())) {
skiaDrawText(canvas, *origin, &paint, &glyphs[0], &advances[0], &offsets[0], numGlyphs);
didFill = true;
}
// Stroking on top (if necessary).
if ((textMode & TextModeStroke)
&& platformContext->getStrokeStyle() != NoStroke
&& platformContext->getStrokeThickness() > 0) {
paint.reset();
platformContext->setupPaintForStroking(&paint, 0, 0);
paint.setTextEncoding(SkPaint::kGlyphID_TextEncoding);
setupPaintForFont(hfont, &paint, platformContext);
if (didFill) {
// If there is a shadow and we filled above, there will already be
// a shadow. We don't want to draw it again or it will be too dark
// and it will go on top of the fill.
//
// Note that this isn't strictly correct, since the stroke could be
// very thick and the shadow wouldn't account for this. The "right"
// thing would be to draw to a new layer and then draw that layer
// with a shadow. But this is a lot of extra work for something
// that isn't normally an issue.
paint.setLooper(0);
}
skiaDrawText(canvas, *origin, &paint, &glyphs[0], &advances[0], &offsets[0], numGlyphs);
}
}
static void paintSkiaText(GraphicsContext* context, HFONT hfont,
SkTypeface* face, float size, uint32_t textFlags,
int numGlyphs,
const WORD* glyphs,
const int* advances,
const GOFFSET* offsets,
const SkPoint& origin,
const SkRect& textRect)
{
TextDrawingModeFlags textMode = context->textDrawingMode();
// Ensure font load for printing, because PDF device needs it.
if (context->isPrintingDevice())
FontPlatformData::ensureFontLoaded(hfont);
// Filling (if necessary). This is the common case.
SkPaint paint;
context->setupPaintForFilling(&paint);
paint.setTextEncoding(SkPaint::kGlyphID_TextEncoding);
setupPaintForFont(&paint, context, face, size, textFlags);
bool didFill = false;
if ((textMode & TextModeFill) && (SkColorGetA(paint.getColor()) || paint.getLooper())) {
skiaDrawText(context, origin, textRect, &paint, &glyphs[0], &advances[0], &offsets[0], numGlyphs);
didFill = true;
}
// Stroking on top (if necessary).
if ((textMode & TextModeStroke)
&& context->strokeStyle() != NoStroke
&& context->strokeThickness() > 0) {
paint.reset();
context->setupPaintForStroking(&paint);
paint.setTextEncoding(SkPaint::kGlyphID_TextEncoding);
setupPaintForFont(&paint, context, face, size, textFlags);
if (didFill) {
// If there is a shadow and we filled above, there will already be
// a shadow. We don't want to draw it again or it will be too dark
// and it will go on top of the fill.
//
// Note that this isn't strictly correct, since the stroke could be
// very thick and the shadow wouldn't account for this. The "right"
// thing would be to draw to a new layer and then draw that layer
// with a shadow. But this is a lot of extra work for something
// that isn't normally an issue.
paint.setLooper(0);
}
skiaDrawText(context, origin, textRect, &paint, &glyphs[0], &advances[0], &offsets[0], numGlyphs);
}
}
// Returns true if all pixels painted will be opaque.
static inline bool paintIsOpaque(const SkPaint& paint, const SkBitmap* bitmap = 0, bool checkFillOnly = false)
{
if (paint.getAlpha() < 0xFF)
return false;
if (!checkFillOnly && paint.getStyle() != SkPaint::kFill_Style && paint.isAntiAlias())
return false;
SkShader* shader = paint.getShader();
if (shader && !shader->isOpaque())
return false;
if (bitmap && !bitmap->isOpaque())
return false;
if (paint.getLooper())
return false;
if (paint.getImageFilter())
return false;
if (paint.getMaskFilter())
return false;
SkColorFilter* colorFilter = paint.getColorFilter();
if (colorFilter && !(colorFilter->getFlags() & SkColorFilter::kAlphaUnchanged_Flag))
return false;
return true;
}
// Even with kEntirePaint_Bits, we always ensure that the master paint's
// text-encoding is respected, since that controls how we interpret the
// text/length parameters of a draw[Pos]Text call.
void SkLayerDrawLooper::ApplyInfo(SkPaint* dst, const SkPaint& src,
const LayerInfo& info) {
uint32_t mask = info.fFlagsMask;
dst->setFlags((dst->getFlags() & ~mask) | (src.getFlags() & mask));
dst->setColor(xferColor(src.getColor(), dst->getColor(), info.fColorMode));
BitFlags bits = info.fPaintBits;
SkPaint::TextEncoding encoding = dst->getTextEncoding();
if (0 == bits) {
return;
}
if (kEntirePaint_Bits == bits) {
// we've already computed these, so save it from the assignment
uint32_t f = dst->getFlags();
SkColor c = dst->getColor();
*dst = src;
dst->setFlags(f);
dst->setColor(c);
dst->setTextEncoding(encoding);
return;
}
if (bits & kStyle_Bit) {
dst->setStyle(src.getStyle());
dst->setStrokeWidth(src.getStrokeWidth());
dst->setStrokeMiter(src.getStrokeMiter());
dst->setStrokeCap(src.getStrokeCap());
dst->setStrokeJoin(src.getStrokeJoin());
}
if (bits & kTextSkewX_Bit) {
dst->setTextSkewX(src.getTextSkewX());
}
if (bits & kPathEffect_Bit) {
dst->setPathEffect(src.getPathEffect());
}
if (bits & kMaskFilter_Bit) {
dst->setMaskFilter(src.getMaskFilter());
}
if (bits & kShader_Bit) {
dst->setShader(src.getShader());
}
if (bits & kColorFilter_Bit) {
dst->setColorFilter(src.getColorFilter());
}
if (bits & kXfermode_Bit) {
dst->setXfermode(src.getXfermode());
}
// we don't override these
#if 0
dst->setTypeface(src.getTypeface());
dst->setTextSize(src.getTextSize());
dst->setTextScaleX(src.getTextScaleX());
dst->setRasterizer(src.getRasterizer());
dst->setLooper(src.getLooper());
dst->setTextEncoding(src.getTextEncoding());
dst->setHinting(src.getHinting());
#endif
}
// Even with kEntirePaint_Bits, we always ensure that the master paint's
// text-encoding is respected, since that controls how we interpret the
// text/length parameters of a draw[Pos]Text call.
void SkLayerDrawLooper::LayerDrawLooperContext::ApplyInfo(
SkPaint* dst, const SkPaint& src, const LayerInfo& info) {
SkColor4f srcColor = src.getColor4f();
#ifdef SK_BUILD_FOR_ANDROID_FRAMEWORK
// The framework may respect the alpha value on the original paint.
// Match this legacy behavior.
if (src.getAlpha() == 255) {
srcColor.fA = dst->getColor4f().fA;
}
#endif
dst->setColor4f(xferColor(srcColor, dst->getColor4f(), (SkBlendMode)info.fColorMode),
sk_srgb_singleton());
BitFlags bits = info.fPaintBits;
SkPaint::TextEncoding encoding = dst->getTextEncoding();
if (0 == bits) {
return;
}
if (kEntirePaint_Bits == bits) {
// we've already computed these, so save it from the assignment
uint32_t f = dst->getFlags();
SkColor4f c = dst->getColor4f();
*dst = src;
dst->setFlags(f);
dst->setColor4f(c, sk_srgb_singleton());
dst->setTextEncoding(encoding);
return;
}
if (bits & kStyle_Bit) {
dst->setStyle(src.getStyle());
dst->setStrokeWidth(src.getStrokeWidth());
dst->setStrokeMiter(src.getStrokeMiter());
dst->setStrokeCap(src.getStrokeCap());
dst->setStrokeJoin(src.getStrokeJoin());
}
if (bits & kTextSkewX_Bit) {
dst->setTextSkewX(src.getTextSkewX());
}
if (bits & kPathEffect_Bit) {
dst->setPathEffect(src.refPathEffect());
}
if (bits & kMaskFilter_Bit) {
dst->setMaskFilter(src.refMaskFilter());
}
if (bits & kShader_Bit) {
dst->setShader(src.refShader());
}
if (bits & kColorFilter_Bit) {
dst->setColorFilter(src.refColorFilter());
}
if (bits & kXfermode_Bit) {
dst->setBlendMode(src.getBlendMode());
}
// we don't override these
#if 0
dst->setTypeface(src.getTypeface());
dst->setTextSize(src.getTextSize());
dst->setTextScaleX(src.getTextScaleX());
dst->setRasterizer(src.getRasterizer());
dst->setLooper(src.getLooper());
dst->setTextEncoding(src.getTextEncoding());
dst->setHinting(src.getHinting());
#endif
}
void SkFlatPaint::dump() const {
SkPaint defaultPaint;
SkFlattenableReadBuffer buffer(fPaintData);
SkTypeface* typeface = (SkTypeface*) buffer.readPtr();
char pBuffer[DUMP_BUFFER_SIZE];
char* bufferPtr = pBuffer;
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"paint: ");
if (typeface != defaultPaint.getTypeface())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"typeface:%p ", typeface);
SkScalar textSize = buffer.readScalar();
if (textSize != defaultPaint.getTextSize())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"textSize:%g ", SkScalarToFloat(textSize));
SkScalar textScaleX = buffer.readScalar();
if (textScaleX != defaultPaint.getTextScaleX())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"textScaleX:%g ", SkScalarToFloat(textScaleX));
SkScalar textSkewX = buffer.readScalar();
if (textSkewX != defaultPaint.getTextSkewX())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"textSkewX:%g ", SkScalarToFloat(textSkewX));
const SkPathEffect* pathEffect = (const SkPathEffect*) buffer.readFlattenable();
if (pathEffect != defaultPaint.getPathEffect())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"pathEffect:%p ", pathEffect);
SkDELETE(pathEffect);
const SkShader* shader = (const SkShader*) buffer.readFlattenable();
if (shader != defaultPaint.getShader())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"shader:%p ", shader);
SkDELETE(shader);
const SkXfermode* xfermode = (const SkXfermode*) buffer.readFlattenable();
if (xfermode != defaultPaint.getXfermode())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"xfermode:%p ", xfermode);
SkDELETE(xfermode);
const SkMaskFilter* maskFilter = (const SkMaskFilter*) buffer.readFlattenable();
if (maskFilter != defaultPaint.getMaskFilter())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"maskFilter:%p ", maskFilter);
SkDELETE(maskFilter);
const SkColorFilter* colorFilter = (const SkColorFilter*) buffer.readFlattenable();
if (colorFilter != defaultPaint.getColorFilter())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"colorFilter:%p ", colorFilter);
SkDELETE(colorFilter);
const SkRasterizer* rasterizer = (const SkRasterizer*) buffer.readFlattenable();
if (rasterizer != defaultPaint.getRasterizer())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"rasterizer:%p ", rasterizer);
SkDELETE(rasterizer);
const SkDrawLooper* drawLooper = (const SkDrawLooper*) buffer.readFlattenable();
if (drawLooper != defaultPaint.getLooper())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"drawLooper:%p ", drawLooper);
SkDELETE(drawLooper);
unsigned color = buffer.readU32();
if (color != defaultPaint.getColor())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"color:0x%x ", color);
SkScalar strokeWidth = buffer.readScalar();
if (strokeWidth != defaultPaint.getStrokeWidth())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"strokeWidth:%g ", SkScalarToFloat(strokeWidth));
SkScalar strokeMiter = buffer.readScalar();
if (strokeMiter != defaultPaint.getStrokeMiter())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"strokeMiter:%g ", SkScalarToFloat(strokeMiter));
unsigned flags = buffer.readU16();
if (flags != defaultPaint.getFlags())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"flags:0x%x ", flags);
int align = buffer.readU8();
if (align != defaultPaint.getTextAlign())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"align:0x%x ", align);
int strokeCap = buffer.readU8();
if (strokeCap != defaultPaint.getStrokeCap())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"strokeCap:0x%x ", strokeCap);
int strokeJoin = buffer.readU8();
if (strokeJoin != defaultPaint.getStrokeJoin())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"align:0x%x ", strokeJoin);
int style = buffer.readU8();
if (style != defaultPaint.getStyle())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"style:0x%x ", style);
int textEncoding = buffer.readU8();
if (textEncoding != defaultPaint.getTextEncoding())
bufferPtr += snprintf(bufferPtr, DUMP_BUFFER_SIZE - (bufferPtr - pBuffer),
"textEncoding:0x%x ", textEncoding);
SkDebugf("%s\n", pBuffer);
}
