/* virtual */ void
BasicTableLayoutStrategy::ComputeColumnISizes(const ReflowInput& aReflowInput)
{
nscoord iSize = aReflowInput.ComputedISize();
if (mLastCalcISize == iSize) {
return;
}
mLastCalcISize = iSize;
NS_ASSERTION((mMinISize == NS_INTRINSIC_WIDTH_UNKNOWN) ==
(mPrefISize == NS_INTRINSIC_WIDTH_UNKNOWN),
"dirtyness out of sync");
NS_ASSERTION((mMinISize == NS_INTRINSIC_WIDTH_UNKNOWN) ==
(mPrefISizePctExpand == NS_INTRINSIC_WIDTH_UNKNOWN),
"dirtyness out of sync");
// XXX Is this needed?
if (mMinISize == NS_INTRINSIC_WIDTH_UNKNOWN) {
ComputeIntrinsicISizes(aReflowInput.mRenderingContext);
}
nsTableCellMap *cellMap = mTableFrame->GetCellMap();
int32_t colCount = cellMap->GetColCount();
if (colCount <= 0)
return; // nothing to do
DistributeISizeToColumns(iSize, 0, colCount, BTLS_FINAL_ISIZE, false);
#ifdef DEBUG_TABLE_STRATEGY
printf("ComputeColumnISizes final\n");
mTableFrame->Dump(false, true, false);
#endif
}
void
nsSVGForeignObjectFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MOZ_ASSERT(!(GetStateBits() & NS_FRAME_IS_NONDISPLAY),
"Should not have been called");
// Only InvalidateAndScheduleBoundsUpdate marks us with NS_FRAME_IS_DIRTY,
// so if that bit is still set we still have a resize pending. If we hit
// this assertion, then we should get the presShell to skip reflow roots
// that have a dirty parent since a reflow is going to come via the
// reflow root's parent anyway.
NS_ASSERTION(!(GetStateBits() & NS_FRAME_IS_DIRTY),
"Reflowing while a resize is pending is wasteful");
// ReflowSVG makes sure mRect is up to date before we're called.
NS_ASSERTION(!aReflowInput.mParentReflowInput,
"should only get reflow from being reflow root");
NS_ASSERTION(aReflowInput.ComputedWidth() == GetSize().width &&
aReflowInput.ComputedHeight() == GetSize().height,
"reflow roots should be reflowed at existing size and "
"svg.css should ensure we have no padding/border/margin");
DoReflow();
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm, aReflowInput.ComputedISize(),
aReflowInput.ComputedBSize());
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
aStatus = NS_FRAME_COMPLETE;
}
void
nsTextControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTextControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// make sure that the form registers itself on the initial/first reflow
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
// set values of reflow's out parameters
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize
finalSize(wm,
aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(wm),
aReflowInput.ComputedBSize() +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(wm));
aDesiredSize.SetSize(wm, finalSize);
// computation of the ascent wrt the input height
nscoord lineHeight = aReflowInput.ComputedBSize();
float inflation = nsLayoutUtils::FontSizeInflationFor(this);
if (!IsSingleLineTextControl()) {
lineHeight = ReflowInput::CalcLineHeight(GetContent(), StyleContext(),
NS_AUTOHEIGHT, inflation);
}
RefPtr<nsFontMetrics> fontMet =
nsLayoutUtils::GetFontMetricsForFrame(this, inflation);
// now adjust for our borders and padding
aDesiredSize.SetBlockStartAscent(
nsLayoutUtils::GetCenteredFontBaseline(fontMet, lineHeight,
wm.IsLineInverted()) +
aReflowInput.ComputedLogicalBorderPadding().BStart(wm));
// overflow handling
aDesiredSize.SetOverflowAreasToDesiredBounds();
// perform reflow on all kids
nsIFrame* kid = mFrames.FirstChild();
while (kid) {
ReflowTextControlChild(kid, aPresContext, aReflowInput, aStatus, aDesiredSize);
kid = kid->GetNextSibling();
}
// take into account css properties that affect overflow handling
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsHTMLButtonControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsHTMLButtonControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_PRECONDITION(aReflowInput.ComputedISize() != NS_INTRINSICSIZE,
"Should have real computed inline-size by now");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(static_cast<nsIFrame*>(this), true);
}
// Reflow the child
nsIFrame* firstKid = mFrames.FirstChild();
MOZ_ASSERT(firstKid, "Button should have a child frame for its contents");
MOZ_ASSERT(!firstKid->GetNextSibling(),
"Button should have exactly one child frame");
MOZ_ASSERT(firstKid->StyleContext()->GetPseudo() ==
nsCSSAnonBoxes::buttonContent,
"Button's child frame has unexpected pseudo type!");
// XXXbz Eventually we may want to check-and-bail if
// !aReflowInput.ShouldReflowAllKids() &&
// !NS_SUBTREE_DIRTY(firstKid).
// We'd need to cache our ascent for that, of course.
// Reflow the contents of the button.
// (This populates our aDesiredSize, too.)
ReflowButtonContents(aPresContext, aDesiredSize,
aReflowInput, firstKid);
if (!ShouldClipPaintingToBorderBox()) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, firstKid);
}
// else, we ignore child overflow -- anything that overflows beyond our
// own border-box will get clipped when painting.
aStatus = NS_FRAME_COMPLETE;
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize,
aReflowInput, aStatus);
// We're always complete and we don't support overflow containers
// so we shouldn't have a next-in-flow ever.
aStatus = NS_FRAME_COMPLETE;
MOZ_ASSERT(!GetNextInFlow());
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
static nscoord
ComputeDescendantISize(const ReflowInput& aAncestorReflowInput,
nsIFrame *aDescendantFrame)
{
nsIFrame *ancestorFrame = aAncestorReflowInput.mFrame->FirstInFlow();
if (aDescendantFrame == ancestorFrame) {
return aAncestorReflowInput.ComputedISize();
}
AutoTArray<nsIFrame*, 16> frames;
for (nsIFrame *f = aDescendantFrame; f != ancestorFrame;
f = f->GetParent()->FirstInFlow()) {
frames.AppendElement(f);
}
// This ignores the inline-size contributions made by scrollbars, though in
// reality we don't have any scrollbars on the sorts of devices on
// which we use font inflation, so it's not a problem. But it may
// occasionally cause problems when writing tests on desktop.
uint32_t len = frames.Length();
ReflowInput *reflowInputs = static_cast<ReflowInput*>
(moz_xmalloc(sizeof(ReflowInput) * len));
nsPresContext *presContext = aDescendantFrame->PresContext();
for (uint32_t i = 0; i < len; ++i) {
const ReflowInput &parentReflowInput =
(i == 0) ? aAncestorReflowInput : reflowInputs[i - 1];
nsIFrame *frame = frames[len - i - 1];
WritingMode wm = frame->GetWritingMode();
LogicalSize availSize = parentReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
MOZ_ASSERT(frame->GetParent()->FirstInFlow() ==
parentReflowInput.mFrame->FirstInFlow(),
"bad logic in this function");
new (reflowInputs + i) ReflowInput(presContext, parentReflowInput,
frame, availSize);
}
MOZ_ASSERT(reflowInputs[len - 1].mFrame == aDescendantFrame,
"bad logic in this function");
nscoord result = reflowInputs[len - 1].ComputedISize();
for (uint32_t i = len; i-- != 0; ) {
reflowInputs[i].~ReflowInput();
}
free(reflowInputs);
return result;
}
/* virtual */ void
nsBackdropFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsBackdropFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// Note that this frame is a child of the viewport frame.
WritingMode wm = aReflowInput.GetWritingMode();
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord isize = aReflowInput.ComputedISize() + borderPadding.IStartEnd(wm);
nscoord bsize = aReflowInput.ComputedBSize() + borderPadding.BStartEnd(wm);
aDesiredSize.SetSize(wm, LogicalSize(wm, isize, bsize));
aStatus = NS_FRAME_COMPLETE;
}
// Helper-function that lets us clone the button's reflow state, but with its
// ComputedWidth and ComputedHeight reduced by the amount of renderer-specific
// focus border and padding that we're using. (This lets us provide a more
// appropriate content-box size for descendents' percent sizes to resolve
// against.)
static ReflowInput
CloneReflowInputWithReducedContentBox(
const ReflowInput& aButtonReflowInput,
const LogicalMargin& aFocusPadding)
{
auto wm = aButtonReflowInput.GetWritingMode();
nscoord adjustedISize = aButtonReflowInput.ComputedISize();
adjustedISize -= aFocusPadding.IStartEnd(wm);
adjustedISize = std::max(0, adjustedISize);
// (Only adjust the block-size if it's an actual length.)
nscoord adjustedBSize = aButtonReflowInput.ComputedBSize();
if (adjustedBSize != NS_INTRINSICSIZE) {
adjustedBSize -= aFocusPadding.BStartEnd(wm);
adjustedBSize = std::max(0, adjustedBSize);
}
ReflowInput clone(aButtonReflowInput);
clone.SetComputedISize(adjustedISize);
clone.SetComputedBSize(adjustedBSize);
return clone;
}
void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");
NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
"nsNumberControlFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first");
NS_ASSERTION(!mFrames.FirstChild() ||
!mFrames.FirstChild()->GetNextSibling(),
"We expect at most one direct child frame");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
const WritingMode myWM = aReflowInput.GetWritingMode();
// The ISize of our content box, which is the available ISize
// for our anonymous content:
const nscoord contentBoxISize = aReflowInput.ComputedISize();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
// Figure out our border-box sizes as well (by adding borderPadding to
// content-box sizes):
const nscoord borderBoxISize = contentBoxISize +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
nscoord borderBoxBSize;
if (contentBoxBSize != NS_INTRINSICSIZE) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
} // else, we'll figure out borderBoxBSize after we resolve contentBoxBSize.
nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();
if (!outerWrapperFrame) { // display:none?
if (contentBoxBSize == NS_INTRINSICSIZE) {
contentBoxBSize = 0;
borderBoxBSize =
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
} else {
NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");
ReflowOutput wrappersDesiredSize(aReflowInput);
WritingMode wrapperWM = outerWrapperFrame->GetWritingMode();
LogicalSize availSize = aReflowInput.ComputedSize(wrapperWM);
availSize.BSize(wrapperWM) = NS_UNCONSTRAINEDSIZE;
ReflowInput wrapperReflowInput(aPresContext, aReflowInput,
outerWrapperFrame, availSize);
// Convert wrapper margin into my own writing-mode (in case it differs):
LogicalMargin wrapperMargin =
wrapperReflowInput.ComputedLogicalMargin().ConvertTo(myWM, wrapperWM);
// offsets of wrapper frame within this frame:
LogicalPoint
wrapperOffset(myWM,
aReflowInput.ComputedLogicalBorderPadding().IStart(myWM) +
wrapperMargin.IStart(myWM),
aReflowInput.ComputedLogicalBorderPadding().BStart(myWM) +
wrapperMargin.BStart(myWM));
nsReflowStatus childStatus;
// We initially reflow the child with a dummy containerSize; positioning
// will be fixed later.
const nsSize dummyContainerSize;
ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
wrapperReflowInput, myWM, wrapperOffset, dummyContainerSize, 0,
childStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
"We gave our child unconstrained available block-size, "
"so it should be complete");
nscoord wrappersMarginBoxBSize =
wrappersDesiredSize.BSize(myWM) + wrapperMargin.BStartEnd(myWM);
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We are intrinsically sized -- we should shrinkwrap the outer wrapper's
// block-size:
contentBoxBSize = wrappersMarginBoxBSize;
// Make sure we obey min/max-bsize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since ComputedMaxBSize and
// ComputedMinBSize are content heights.
contentBoxBSize =
NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
// Center child in block axis
nscoord extraSpace = contentBoxBSize - wrappersMarginBoxBSize;
wrapperOffset.B(myWM) += std::max(0, extraSpace / 2);
// Needed in FinishReflowChild, for logical-to-physical conversion:
nsSize borderBoxSize = LogicalSize(myWM, borderBoxISize, borderBoxBSize).
GetPhysicalSize(myWM);
// Place the child
FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
&wrapperReflowInput, myWM, wrapperOffset,
borderBoxSize, 0);
nsSize contentBoxSize =
LogicalSize(myWM, contentBoxISize, contentBoxBSize).
GetPhysicalSize(myWM);
aDesiredSize.SetBlockStartAscent(
wrappersDesiredSize.BlockStartAscent() +
outerWrapperFrame->BStart(aReflowInput.GetWritingMode(),
contentBoxSize));
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aDesiredSize.SetSize(myWM, logicalDesiredSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (outerWrapperFrame) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
}
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
bool
nsColumnSetFrame::ReflowChildren(ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus,
const ReflowConfig& aConfig,
bool aUnboundedLastColumn,
nsCollapsingMargin* aCarriedOutBEndMargin,
ColumnBalanceData& aColData)
{
aColData.Reset();
bool allFit = true;
WritingMode wm = GetWritingMode();
bool isVertical = wm.IsVertical();
bool isRTL = !wm.IsBidiLTR();
bool shrinkingBSizeOnly = !NS_SUBTREE_DIRTY(this) &&
mLastBalanceBSize > aConfig.mColMaxBSize;
#ifdef DEBUG_roc
printf("*** Doing column reflow pass: mLastBalanceBSize=%d, mColMaxBSize=%d, RTL=%d\n"
" mBalanceColCount=%d, mColISize=%d, mColGap=%d\n",
mLastBalanceBSize, aConfig.mColMaxBSize, isRTL, aConfig.mBalanceColCount,
aConfig.mColISize, aConfig.mColGap);
#endif
DrainOverflowColumns();
const bool colBSizeChanged = mLastBalanceBSize != aConfig.mColMaxBSize;
if (colBSizeChanged) {
mLastBalanceBSize = aConfig.mColMaxBSize;
// XXX Seems like this could fire if incremental reflow pushed the column set
// down so we reflow incrementally with a different available height.
// We need a way to do an incremental reflow and be sure availableHeight
// changes are taken account of! Right now I think block frames with absolute
// children might exit early.
//NS_ASSERTION(aKidReason != eReflowReason_Incremental,
// "incremental reflow should not have changed the balance height");
}
// get our border and padding
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
borderPadding.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));
nsRect contentRect(0, 0, 0, 0);
nsOverflowAreas overflowRects;
nsIFrame* child = mFrames.FirstChild();
LogicalPoint childOrigin(wm, borderPadding.IStart(wm),
borderPadding.BStart(wm));
// In vertical-rl mode, columns will not be correctly placed if the
// reflowInput's ComputedWidth() is UNCONSTRAINED (in which case we'll get
// a containerSize.width of zero here). In that case, the column positions
// will be adjusted later, after our correct contentSize is known.
nsSize containerSize = aReflowInput.ComputedSizeAsContainerIfConstrained();
// For RTL, since the columns might not fill the frame exactly, we
// need to account for the slop. Otherwise we'll waste time moving the
// columns by some tiny amount
// XXX when all of layout is converted to logical coordinates, we
// probably won't need to do this hack any more. For now, we
// confine it to the legacy horizontal-rl case
if (!isVertical && isRTL) {
nscoord availISize = aReflowInput.AvailableISize();
if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
availISize = aReflowInput.ComputedISize();
}
if (availISize != NS_INTRINSICSIZE) {
childOrigin.I(wm) = containerSize.width - borderPadding.Left(wm) -
availISize;
#ifdef DEBUG_roc
printf("*** childOrigin.iCoord = %d\n", childOrigin.I(wm));
#endif
}
}
int columnCount = 0;
int contentBEnd = 0;
bool reflowNext = false;
while (child) {
// Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
// skip if the next column is dirty, because the next column's first line(s)
// might be pullable back to this column. We can't skip if it's the last child
// because we need to obtain the bottom margin. We can't skip
// if this is the last column and we're supposed to assign unbounded
// height to it, because that could change the available height from
// the last time we reflowed it and we should try to pull all the
// content from its next sibling. (Note that it might be the last
// column, but not be the last child because the desired number of columns
// has changed.)
bool skipIncremental = !aReflowInput.ShouldReflowAllKids()
&& !NS_SUBTREE_DIRTY(child)
&& child->GetNextSibling()
&& !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
&& !NS_SUBTREE_DIRTY(child->GetNextSibling());
// If we need to pull up content from the prev-in-flow then this is not just
// a height shrink. The prev in flow will have set the dirty bit.
// Check the overflow rect YMost instead of just the child's content height. The child
// may have overflowing content that cares about the available height boundary.
// (It may also have overflowing content that doesn't care about the available height
// boundary, but if so, too bad, this optimization is defeated.)
// We want scrollable overflow here since this is a calculation that
// affects layout.
bool skipResizeBSizeShrink = false;
if (shrinkingBSizeOnly) {
switch (wm.GetBlockDir()) {
case WritingMode::eBlockTB:
if (child->GetScrollableOverflowRect().YMost() <= aConfig.mColMaxBSize) {
skipResizeBSizeShrink = true;
}
break;
case WritingMode::eBlockLR:
if (child->GetScrollableOverflowRect().XMost() <= aConfig.mColMaxBSize) {
skipResizeBSizeShrink = true;
}
break;
case WritingMode::eBlockRL:
// XXX not sure how to handle this, so for now just don't attempt
// the optimization
break;
default:
NS_NOTREACHED("unknown block direction");
break;
}
}
nscoord childContentBEnd = 0;
if (!reflowNext && (skipIncremental || skipResizeBSizeShrink)) {
// This child does not need to be reflowed, but we may need to move it
MoveChildTo(child, childOrigin, wm, containerSize);
// If this is the last frame then make sure we get the right status
nsIFrame* kidNext = child->GetNextSibling();
if (kidNext) {
aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
? NS_FRAME_OVERFLOW_INCOMPLETE
: NS_FRAME_NOT_COMPLETE;
} else {
aStatus = mLastFrameStatus;
}
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
#ifdef DEBUG_roc
printf("*** Skipping child #%d %p (incremental %d, resize block-size shrink %d): status = %d\n",
columnCount, (void*)child, skipIncremental, skipResizeBSizeShrink, aStatus);
#endif
} else {
LogicalSize availSize(wm, aConfig.mColISize, aConfig.mColMaxBSize);
if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
availSize.BSize(wm) = GetAvailableContentBSize(aReflowInput);
}
LogicalSize computedSize = aReflowInput.ComputedSize(wm);
if (reflowNext)
child->AddStateBits(NS_FRAME_IS_DIRTY);
LogicalSize kidCBSize(wm, availSize.ISize(wm), computedSize.BSize(wm));
ReflowInput kidReflowInput(PresContext(), aReflowInput, child,
availSize, &kidCBSize);
kidReflowInput.mFlags.mIsTopOfPage = true;
kidReflowInput.mFlags.mTableIsSplittable = false;
kidReflowInput.mFlags.mIsColumnBalancing = aConfig.mBalanceColCount < INT32_MAX;
// We need to reflow any float placeholders, even if our column height
// hasn't changed.
kidReflowInput.mFlags.mMustReflowPlaceholders = !colBSizeChanged;
#ifdef DEBUG_roc
printf("*** Reflowing child #%d %p: availHeight=%d\n",
columnCount, (void*)child,availSize.BSize(wm));
#endif
// Note if the column's next in flow is not being changed by this incremental reflow.
// This may allow the current column to avoid trying to pull lines from the next column.
if (child->GetNextSibling() &&
!(GetStateBits() & NS_FRAME_IS_DIRTY) &&
!(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
kidReflowInput.mFlags.mNextInFlowUntouched = true;
}
ReflowOutput kidDesiredSize(wm, aDesiredSize.mFlags);
// XXX it would be cool to consult the float manager for the
// previous block to figure out the region of floats from the
// previous column that extend into this column, and subtract
// that region from the new float manager. So you could stick a
// really big float in the first column and text in following
// columns would flow around it.
// Reflow the frame
LogicalPoint origin(wm,
childOrigin.I(wm) +
kidReflowInput.ComputedLogicalMargin().IStart(wm),
childOrigin.B(wm) +
kidReflowInput.ComputedLogicalMargin().BStart(wm));
ReflowChild(child, PresContext(), kidDesiredSize, kidReflowInput,
wm, origin, containerSize, 0, aStatus);
reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;
#ifdef DEBUG_roc
printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d CarriedOutBEndMargin=%d\n",
columnCount, (void*)child, aStatus, kidDesiredSize.Width(), kidDesiredSize.Height(),
kidDesiredSize.mCarriedOutBEndMargin.get());
#endif
NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);
*aCarriedOutBEndMargin = kidDesiredSize.mCarriedOutBEndMargin;
FinishReflowChild(child, PresContext(), kidDesiredSize,
&kidReflowInput, wm, childOrigin, containerSize, 0);
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
if (childContentBEnd > aConfig.mColMaxBSize) {
allFit = false;
}
if (childContentBEnd > availSize.BSize(wm)) {
aColData.mMaxOverflowingBSize = std::max(childContentBEnd,
aColData.mMaxOverflowingBSize);
}
}
contentRect.UnionRect(contentRect, child->GetRect());
ConsiderChildOverflow(overflowRects, child);
contentBEnd = std::max(contentBEnd, childContentBEnd);
aColData.mLastBSize = childContentBEnd;
aColData.mSumBSize += childContentBEnd;
// Build a continuation column if necessary
nsIFrame* kidNextInFlow = child->GetNextInFlow();
if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
child = nullptr;
break;
} else {
++columnCount;
// Make sure that the column has a next-in-flow. If not, we must
// create one to hold the overflowing stuff, even if we're just
// going to put it on our overflow list and let *our*
// next in flow handle it.
if (!kidNextInFlow) {
NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
"We have to create a continuation, but the block doesn't want us to reflow it?");
// We need to create a continuing column
kidNextInFlow = CreateNextInFlow(child);
}
// Make sure we reflow a next-in-flow when it switches between being
// normal or overflow container
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
}
else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
if ((contentBEnd > aReflowInput.ComputedMaxBSize() ||
contentBEnd > aReflowInput.ComputedBSize()) &&
aConfig.mBalanceColCount < INT32_MAX) {
// We overflowed vertically, but have not exceeded the number of
// columns. We're going to go into overflow columns now, so balancing
// no longer applies.
aColData.mHasExcessBSize = true;
}
if (columnCount >= aConfig.mBalanceColCount) {
// No more columns allowed here. Stop.
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
// Move any of our leftover columns to our overflow list. Our
// next-in-flow will eventually pick them up.
const nsFrameList& continuationColumns = mFrames.RemoveFramesAfter(child);
if (continuationColumns.NotEmpty()) {
SetOverflowFrames(continuationColumns);
}
child = nullptr;
break;
}
}
if (PresContext()->HasPendingInterrupt()) {
// Stop the loop now while |child| still points to the frame that bailed
// out. We could keep going here and condition a bunch of the code in
// this loop on whether there's an interrupt, or even just keep going and
// trying to reflow the blocks (even though we know they'll interrupt
// right after their first line), but stopping now is conceptually the
// simplest (and probably fastest) thing.
break;
}
// Advance to the next column
child = child->GetNextSibling();
if (child) {
childOrigin.I(wm) += aConfig.mColISize + aConfig.mColGap;
#ifdef DEBUG_roc
printf("*** NEXT CHILD ORIGIN.icoord = %d\n", childOrigin.I(wm));
#endif
}
}
if (PresContext()->CheckForInterrupt(this) &&
(GetStateBits() & NS_FRAME_IS_DIRTY)) {
// Mark all our kids starting with |child| dirty
// Note that this is a CheckForInterrupt call, not a HasPendingInterrupt,
// because we might have interrupted while reflowing |child|, and since
// we're about to add a dirty bit to |child| we need to make sure that
// |this| is scheduled to have dirty bits marked on it and its ancestors.
// Otherwise, when we go to mark dirty bits on |child|'s ancestors we'll
// bail out immediately, since it'll already have a dirty bit.
for (; child; child = child->GetNextSibling()) {
child->AddStateBits(NS_FRAME_IS_DIRTY);
}
}
aColData.mMaxBSize = contentBEnd;
LogicalSize contentSize = LogicalSize(wm, contentRect.Size());
contentSize.BSize(wm) = std::max(contentSize.BSize(wm), contentBEnd);
mLastFrameStatus = aStatus;
// Apply computed and min/max values
if (aConfig.mComputedBSize != NS_INTRINSICSIZE) {
if (aReflowInput.AvailableBSize() != NS_INTRINSICSIZE) {
contentSize.BSize(wm) = std::min(contentSize.BSize(wm),
aConfig.mComputedBSize);
} else {
contentSize.BSize(wm) = aConfig.mComputedBSize;
}
} else {
// We add the "consumed" block-size back in so that we're applying
// constraints to the correct bSize value, then subtract it again
// after we've finished with the min/max calculation. This prevents us from
// having a last continuation that is smaller than the min bSize. but which
// has prev-in-flows, trigger a larger bSize than actually required.
contentSize.BSize(wm) =
aReflowInput.ApplyMinMaxBSize(contentSize.BSize(wm),
aConfig.mConsumedBSize);
}
if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
contentSize.ISize(wm) = aReflowInput.ComputedISize();
} else {
contentSize.ISize(wm) =
aReflowInput.ApplyMinMaxISize(contentSize.ISize(wm));
}
contentSize.ISize(wm) += borderPadding.IStartEnd(wm);
contentSize.BSize(wm) += borderPadding.BStartEnd(wm);
aDesiredSize.SetSize(wm, contentSize);
aDesiredSize.mOverflowAreas = overflowRects;
aDesiredSize.UnionOverflowAreasWithDesiredBounds();
// In vertical-rl mode, make a second pass if necessary to reposition the
// columns with the correct container width. (In other writing modes,
// correct containerSize was not required for column positioning so we don't
// need this fixup.)
if (wm.IsVerticalRL() && containerSize.width != contentSize.Width(wm)) {
const nsSize finalContainerSize = aDesiredSize.PhysicalSize();
for (nsIFrame* child : mFrames) {
// Get the logical position as set previously using a provisional or
// dummy containerSize, and reset with the correct container size.
child->SetPosition(wm, child->GetLogicalPosition(wm, containerSize),
finalContainerSize);
}
}
#ifdef DEBUG_roc
printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus);
}
nsColumnSetFrame::ReflowConfig
nsColumnSetFrame::ChooseColumnStrategy(const ReflowInput& aReflowInput,
bool aForceAuto = false,
nscoord aFeasibleBSize = NS_INTRINSICSIZE,
nscoord aInfeasibleBSize = 0)
{
nscoord knownFeasibleBSize = aFeasibleBSize;
nscoord knownInfeasibleBSize = aInfeasibleBSize;
const nsStyleColumn* colStyle = StyleColumn();
nscoord availContentISize = GetAvailableContentISize(aReflowInput);
if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
availContentISize = aReflowInput.ComputedISize();
}
nscoord consumedBSize = GetConsumedBSize();
// The effective computed height is the height of the current continuation
// of the column set frame. This should be the same as the computed height
// if we have an unconstrained available height.
nscoord computedBSize = GetEffectiveComputedBSize(aReflowInput,
consumedBSize);
nscoord colBSize = GetAvailableContentBSize(aReflowInput);
if (aReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
colBSize = aReflowInput.ComputedBSize();
} else if (aReflowInput.ComputedMaxBSize() != NS_INTRINSICSIZE) {
colBSize = std::min(colBSize, aReflowInput.ComputedMaxBSize());
}
nscoord colGap = GetColumnGap(this, colStyle);
int32_t numColumns = colStyle->mColumnCount;
// If column-fill is set to 'balance', then we want to balance the columns.
const bool isBalancing = colStyle->mColumnFill == NS_STYLE_COLUMN_FILL_BALANCE
&& !aForceAuto;
if (isBalancing) {
const uint32_t MAX_NESTED_COLUMN_BALANCING = 2;
uint32_t cnt = 0;
for (const ReflowInput* rs = aReflowInput.mParentReflowInput;
rs && cnt < MAX_NESTED_COLUMN_BALANCING; rs = rs->mParentReflowInput) {
if (rs->mFlags.mIsColumnBalancing) {
++cnt;
}
}
if (cnt == MAX_NESTED_COLUMN_BALANCING) {
numColumns = 1;
}
}
nscoord colISize;
// In vertical writing-mode, "column-width" (inline size) will actually be
// physical height, but its CSS name is still column-width.
if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
colISize = colStyle->mColumnWidth.GetCoordValue();
NS_ASSERTION(colISize >= 0, "negative column width");
// Reduce column count if necessary to make columns fit in the
// available width. Compute max number of columns that fit in
// availContentISize, satisfying colGap*(maxColumns - 1) +
// colISize*maxColumns <= availContentISize
if (availContentISize != NS_INTRINSICSIZE && colGap + colISize > 0
&& numColumns > 0) {
// This expression uses truncated rounding, which is what we
// want
int32_t maxColumns =
std::min(nscoord(nsStyleColumn::kMaxColumnCount),
(availContentISize + colGap) / (colGap + colISize));
numColumns = std::max(1, std::min(numColumns, maxColumns));
}
} else if (numColumns > 0 && availContentISize != NS_INTRINSICSIZE) {
nscoord iSizeMinusGaps = availContentISize - colGap * (numColumns - 1);
colISize = iSizeMinusGaps / numColumns;
} else {
colISize = NS_INTRINSICSIZE;
}
// Take care of the situation where there's only one column but it's
// still too wide
colISize = std::max(1, std::min(colISize, availContentISize));
nscoord expectedISizeLeftOver = 0;
if (colISize != NS_INTRINSICSIZE && availContentISize != NS_INTRINSICSIZE) {
// distribute leftover space
// First, determine how many columns will be showing if the column
// count is auto
if (numColumns <= 0) {
// choose so that colGap*(nominalColumnCount - 1) +
// colISize*nominalColumnCount is nearly availContentISize
// make sure to round down
if (colGap + colISize > 0) {
numColumns = (availContentISize + colGap) / (colGap + colISize);
// The number of columns should never exceed kMaxColumnCount.
numColumns = std::min(nscoord(nsStyleColumn::kMaxColumnCount),
numColumns);
}
if (numColumns <= 0) {
numColumns = 1;
}
}
// Compute extra space and divide it among the columns
nscoord extraSpace =
std::max(0, availContentISize - (colISize * numColumns +
colGap * (numColumns - 1)));
nscoord extraToColumns = extraSpace / numColumns;
colISize += extraToColumns;
expectedISizeLeftOver = extraSpace - (extraToColumns * numColumns);
}
if (isBalancing) {
if (numColumns <= 0) {
// Hmm, auto column count, column width or available width is unknown,
// and balancing is required. Let's just use one column then.
numColumns = 1;
}
colBSize = std::min(mLastBalanceBSize, colBSize);
} else {
// This is the case when the column-fill property is set to 'auto'.
// No balancing, so don't limit the column count
numColumns = INT32_MAX;
// XXX_jwir3: If a page's height is set to 0, we could continually
// create continuations, resulting in an infinite loop, since
// no progress is ever made. This is an issue with the spec
// (css3-multicol, css3-page, and css3-break) that is
// unresolved as of 27 Feb 2013. For the time being, we set this
// to have a minimum of 1 css px. Once a resolution is made
// on what minimum to have for a page height, we may need to
// change this value to match the appropriate spec(s).
colBSize = std::max(colBSize, nsPresContext::CSSPixelsToAppUnits(1));
}
#ifdef DEBUG_roc
printf("*** nsColumnSetFrame::ChooseColumnStrategy: numColumns=%d, colISize=%d,"
" expectedISizeLeftOver=%d, colBSize=%d, colGap=%d\n",
numColumns, colISize, expectedISizeLeftOver, colBSize, colGap);
#endif
ReflowConfig config = { numColumns, colISize, expectedISizeLeftOver, colGap,
colBSize, isBalancing, knownFeasibleBSize,
knownInfeasibleBSize, computedBSize, consumedBSize };
return config;
}
void
nsColumnSetFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
// Don't support interruption in columns
nsPresContext::InterruptPreventer noInterrupts(aPresContext);
DO_GLOBAL_REFLOW_COUNT("nsColumnSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
// Our children depend on our block-size if we have a fixed block-size.
if (aReflowInput.ComputedBSize() != NS_AUTOHEIGHT) {
AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
} else {
RemoveStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
}
#ifdef DEBUG
nsFrameList::Enumerator oc(GetChildList(kOverflowContainersList));
for (; !oc.AtEnd(); oc.Next()) {
MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(oc.get()));
}
nsFrameList::Enumerator eoc(GetChildList(kExcessOverflowContainersList));
for (; !eoc.AtEnd(); eoc.Next()) {
MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(eoc.get()));
}
#endif
nsOverflowAreas ocBounds;
nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
ocStatus);
}
//------------ Handle Incremental Reflow -----------------
// If inline size is unconstrained, set aForceAuto to true to allow
// the columns to expand in the inline direction. (This typically
// happens in orthogonal flows where the inline direction is the
// container's block direction).
ReflowConfig config =
ChooseColumnStrategy(aReflowInput,
aReflowInput.ComputedISize() == NS_UNCONSTRAINEDSIZE);
// If balancing, then we allow the last column to grow to unbounded
// height during the first reflow. This gives us a way to estimate
// what the average column height should be, because we can measure
// the heights of all the columns and sum them up. But don't do this
// if we have a next in flow because we don't want to suck all its
// content back here and then have to push it out again!
nsIFrame* nextInFlow = GetNextInFlow();
bool unboundedLastColumn = config.mIsBalancing && !nextInFlow;
nsCollapsingMargin carriedOutBottomMargin;
ColumnBalanceData colData;
colData.mHasExcessBSize = false;
bool feasible = ReflowColumns(aDesiredSize, aReflowInput, aStatus, config,
unboundedLastColumn, &carriedOutBottomMargin,
colData);
// If we're not balancing, then we're already done, since we should have
// reflown all of our children, and there is no need for a binary search to
// determine proper column height.
if (config.mIsBalancing && !aPresContext->HasPendingInterrupt()) {
FindBestBalanceBSize(aReflowInput, aPresContext, config, colData,
aDesiredSize, carriedOutBottomMargin,
unboundedLastColumn, feasible, aStatus);
}
if (aPresContext->HasPendingInterrupt() &&
aReflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
// In this situation, we might be lying about our reflow status, because
// our last kid (the one that got interrupted) was incomplete. Fix that.
aStatus = NS_FRAME_COMPLETE;
}
NS_ASSERTION(NS_FRAME_IS_FULLY_COMPLETE(aStatus) ||
aReflowInput.AvailableBSize() != NS_UNCONSTRAINEDSIZE,
"Column set should be complete if the available block-size is unconstrained");
// Merge overflow container bounds and status.
aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
NS_MergeReflowStatusInto(&aStatus, ocStatus);
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus, false);
aDesiredSize.mCarriedOutBEndMargin = carriedOutBottomMargin;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsFieldSetFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFieldSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_PRECONDITION(aReflowInput.ComputedISize() != NS_INTRINSICSIZE,
"Should have a precomputed inline-size!");
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
nsOverflowAreas ocBounds;
nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
ocStatus);
}
//------------ Handle Incremental Reflow -----------------
bool reflowInner;
bool reflowLegend;
nsIFrame* legend = GetLegend();
nsIFrame* inner = GetInner();
if (aReflowInput.ShouldReflowAllKids()) {
reflowInner = inner != nullptr;
reflowLegend = legend != nullptr;
} else {
reflowInner = inner && NS_SUBTREE_DIRTY(inner);
reflowLegend = legend && NS_SUBTREE_DIRTY(legend);
}
// We don't allow fieldsets to break vertically. If we did, we'd
// need logic here to push and pull overflow frames.
// Since we're not applying our padding in this frame, we need to add it here
// to compute the available width for our children.
WritingMode wm = GetWritingMode();
WritingMode innerWM = inner ? inner->GetWritingMode() : wm;
WritingMode legendWM = legend ? legend->GetWritingMode() : wm;
LogicalSize innerAvailSize = aReflowInput.ComputedSizeWithPadding(innerWM);
LogicalSize legendAvailSize = aReflowInput.ComputedSizeWithPadding(legendWM);
innerAvailSize.BSize(innerWM) = legendAvailSize.BSize(legendWM) =
NS_UNCONSTRAINEDSIZE;
NS_ASSERTION(!inner ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
inner,
nsLayoutUtils::MIN_ISIZE) <=
innerAvailSize.ISize(innerWM),
"Bogus availSize.ISize; should be bigger");
NS_ASSERTION(!legend ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
legend,
nsLayoutUtils::MIN_ISIZE) <=
legendAvailSize.ISize(legendWM),
"Bogus availSize.ISize; should be bigger");
// get our border and padding
LogicalMargin border = aReflowInput.ComputedLogicalBorderPadding() -
aReflowInput.ComputedLogicalPadding();
// Figure out how big the legend is if there is one.
// get the legend's margin
LogicalMargin legendMargin(wm);
// reflow the legend only if needed
Maybe<ReflowInput> legendReflowInput;
if (legend) {
legendReflowInput.emplace(aPresContext, aReflowInput, legend,
legendAvailSize);
}
if (reflowLegend) {
ReflowOutput legendDesiredSize(aReflowInput);
// We'll move the legend to its proper place later, so the position
// and containerSize passed here are unimportant.
const nsSize dummyContainerSize;
ReflowChild(legend, aPresContext, legendDesiredSize, *legendReflowInput,
wm, LogicalPoint(wm), dummyContainerSize,
NS_FRAME_NO_MOVE_FRAME, aStatus);
#ifdef NOISY_REFLOW
printf(" returned (%d, %d)\n",
legendDesiredSize.Width(), legendDesiredSize.Height());
#endif
// figure out the legend's rectangle
legendMargin = legend->GetLogicalUsedMargin(wm);
mLegendRect =
LogicalRect(wm, 0, 0,
legendDesiredSize.ISize(wm) + legendMargin.IStartEnd(wm),
legendDesiredSize.BSize(wm) + legendMargin.BStartEnd(wm));
nscoord oldSpace = mLegendSpace;
mLegendSpace = 0;
if (mLegendRect.BSize(wm) > border.BStart(wm)) {
// center the border on the legend
mLegendSpace = mLegendRect.BSize(wm) - border.BStart(wm);
} else {
mLegendRect.BStart(wm) =
(border.BStart(wm) - mLegendRect.BSize(wm)) / 2;
}
// if the legend space changes then we need to reflow the
// content area as well.
if (mLegendSpace != oldSpace && inner) {
reflowInner = true;
}
FinishReflowChild(legend, aPresContext, legendDesiredSize,
legendReflowInput.ptr(), wm, LogicalPoint(wm),
dummyContainerSize, NS_FRAME_NO_MOVE_FRAME);
} else if (!legend) {
mLegendRect.SetEmpty();
mLegendSpace = 0;
} else {
// mLegendSpace and mLegendRect haven't changed, but we need
// the used margin when placing the legend.
legendMargin = legend->GetLogicalUsedMargin(wm);
}
// This containerSize is incomplete as yet: it does not include the size
// of the |inner| frame itself.
nsSize containerSize = (LogicalSize(wm, 0, mLegendSpace) +
border.Size(wm)).GetPhysicalSize(wm);
// reflow the content frame only if needed
if (reflowInner) {
ReflowInput kidReflowInput(aPresContext, aReflowInput, inner,
innerAvailSize, nullptr,
ReflowInput::CALLER_WILL_INIT);
// Override computed padding, in case it's percentage padding
kidReflowInput.Init(aPresContext, nullptr, nullptr,
&aReflowInput.ComputedPhysicalPadding());
// Our child is "height:100%" but we actually want its height to be reduced
// by the amount of content-height the legend is eating up, unless our
// height is unconstrained (in which case the child's will be too).
if (aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.SetComputedBSize(
std::max(0, aReflowInput.ComputedBSize() - mLegendSpace));
}
if (aReflowInput.ComputedMinBSize() > 0) {
kidReflowInput.ComputedMinBSize() =
std::max(0, aReflowInput.ComputedMinBSize() - mLegendSpace);
}
if (aReflowInput.ComputedMaxBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.ComputedMaxBSize() =
std::max(0, aReflowInput.ComputedMaxBSize() - mLegendSpace);
}
ReflowOutput kidDesiredSize(kidReflowInput,
aDesiredSize.mFlags);
// Reflow the frame
NS_ASSERTION(kidReflowInput.ComputedPhysicalMargin() == nsMargin(0,0,0,0),
"Margins on anonymous fieldset child not supported!");
LogicalPoint pt(wm, border.IStart(wm), border.BStart(wm) + mLegendSpace);
// We don't know the correct containerSize until we have reflowed |inner|,
// so we use a dummy value for now; FinishReflowChild will fix the position
// if necessary.
const nsSize dummyContainerSize;
ReflowChild(inner, aPresContext, kidDesiredSize, kidReflowInput,
wm, pt, dummyContainerSize, 0, aStatus);
// Update containerSize to account for size of the inner frame, so that
// FinishReflowChild can position it correctly.
containerSize += kidDesiredSize.PhysicalSize();
FinishReflowChild(inner, aPresContext, kidDesiredSize,
&kidReflowInput, wm, pt, containerSize, 0);
NS_FRAME_TRACE_REFLOW_OUT("FieldSet::Reflow", aStatus);
} else if (inner) {
// |inner| didn't need to be reflowed but we do need to include its size
// in containerSize.
containerSize += inner->GetSize();
}
LogicalRect contentRect(wm);
if (inner) {
// We don't support margins on inner, so our content rect is just the
// inner's border-box. (We don't really care about container size at this
// point, as we'll figure out the actual positioning later.)
contentRect = inner->GetLogicalRect(wm, containerSize);
}
// Our content rect must fill up the available width
LogicalSize availSize = aReflowInput.ComputedSizeWithPadding(wm);
if (availSize.ISize(wm) > contentRect.ISize(wm)) {
contentRect.ISize(wm) = innerAvailSize.ISize(wm);
}
if (legend) {
// The legend is positioned inline-wards within the inner's content rect
// (so that padding on the fieldset affects the legend position).
LogicalRect innerContentRect = contentRect;
innerContentRect.Deflate(wm, aReflowInput.ComputedLogicalPadding());
// If the inner content rect is larger than the legend, we can align the
// legend.
if (innerContentRect.ISize(wm) > mLegendRect.ISize(wm)) {
// NOTE legend @align values are: left/right/center/top/bottom.
// GetLogicalAlign converts left/right to start/end for the given WM.
// @see HTMLLegendElement::ParseAttribute, nsLegendFrame::GetLogicalAlign
int32_t align = static_cast<nsLegendFrame*>
(legend->GetContentInsertionFrame())->GetLogicalAlign(wm);
switch (align) {
case NS_STYLE_TEXT_ALIGN_END:
mLegendRect.IStart(wm) =
innerContentRect.IEnd(wm) - mLegendRect.ISize(wm);
break;
case NS_STYLE_TEXT_ALIGN_CENTER:
// Note: rounding removed; there doesn't seem to be any need
mLegendRect.IStart(wm) = innerContentRect.IStart(wm) +
(innerContentRect.ISize(wm) - mLegendRect.ISize(wm)) / 2;
break;
case NS_STYLE_TEXT_ALIGN_START:
case NS_STYLE_VERTICAL_ALIGN_TOP:
case NS_STYLE_VERTICAL_ALIGN_BOTTOM:
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
break;
default:
MOZ_ASSERT_UNREACHABLE("unexpected GetLogicalAlign value");
}
} else {
// otherwise make place for the legend
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
innerContentRect.ISize(wm) = mLegendRect.ISize(wm);
contentRect.ISize(wm) = mLegendRect.ISize(wm) +
aReflowInput.ComputedLogicalPadding().IStartEnd(wm);
}
// place the legend
LogicalRect actualLegendRect = mLegendRect;
actualLegendRect.Deflate(wm, legendMargin);
LogicalPoint actualLegendPos(actualLegendRect.Origin(wm));
// Note that legend's writing mode may be different from the fieldset's,
// so we need to convert offsets before applying them to it (bug 1134534).
LogicalMargin offsets =
legendReflowInput->ComputedLogicalOffsets().
ConvertTo(wm, legendReflowInput->GetWritingMode());
ReflowInput::ApplyRelativePositioning(legend, wm, offsets,
&actualLegendPos,
containerSize);
legend->SetPosition(wm, actualLegendPos, containerSize);
nsContainerFrame::PositionFrameView(legend);
nsContainerFrame::PositionChildViews(legend);
}
// Return our size and our result.
LogicalSize finalSize(wm, contentRect.ISize(wm) + border.IStartEnd(wm),
mLegendSpace + border.BStartEnd(wm) +
(inner ? inner->BSize(wm) : 0));
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (legend) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, legend);
}
if (inner) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, inner);
}
// Merge overflow container bounds and status.
aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
NS_MergeReflowStatusInto(&aStatus, ocStatus);
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus);
InvalidateFrame();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
BlockReflowInput::BlockReflowInput(const ReflowInput& aReflowInput,
nsPresContext* aPresContext,
nsBlockFrame* aFrame,
bool aBStartMarginRoot,
bool aBEndMarginRoot,
bool aBlockNeedsFloatManager,
nscoord aConsumedBSize)
: mBlock(aFrame),
mPresContext(aPresContext),
mReflowInput(aReflowInput),
mContentArea(aReflowInput.GetWritingMode()),
mPushedFloats(nullptr),
mOverflowTracker(nullptr),
mBorderPadding(mReflowInput.ComputedLogicalBorderPadding()),
mPrevBEndMargin(),
mLineNumber(0),
mFloatBreakType(StyleClear::None),
mConsumedBSize(aConsumedBSize)
{
if (!sFloatFragmentsInsideColumnPrefCached) {
sFloatFragmentsInsideColumnPrefCached = true;
Preferences::AddBoolVarCache(&sFloatFragmentsInsideColumnEnabled,
"layout.float-fragments-inside-column.enabled");
}
mFlags.mFloatFragmentsInsideColumnEnabled = sFloatFragmentsInsideColumnEnabled;
WritingMode wm = aReflowInput.GetWritingMode();
mFlags.mIsFirstInflow = !aFrame->GetPrevInFlow();
mFlags.mIsOverflowContainer = IS_TRUE_OVERFLOW_CONTAINER(aFrame);
nsIFrame::LogicalSides logicalSkipSides =
aFrame->GetLogicalSkipSides(&aReflowInput);
mBorderPadding.ApplySkipSides(logicalSkipSides);
// Note that mContainerSize is the physical size, needed to
// convert logical block-coordinates in vertical-rl writing mode
// (measured from a RHS origin) to physical coordinates within the
// containing block.
// If aReflowInput doesn't have a constrained ComputedWidth(), we set
// mContainerSize.width to zero, which means lines will be positioned
// (physically) incorrectly; we will fix them up at the end of
// nsBlockFrame::Reflow, after we know the total block-size of the
// frame.
mContainerSize.width = aReflowInput.ComputedWidth();
if (mContainerSize.width == NS_UNCONSTRAINEDSIZE) {
mContainerSize.width = 0;
}
mContainerSize.width += mBorderPadding.LeftRight(wm);
// For now at least, we don't do that fix-up for mContainerHeight.
// It's only used in nsBidiUtils::ReorderFrames for vertical rtl
// writing modes, which aren't fully supported for the time being.
mContainerSize.height = aReflowInput.ComputedHeight() +
mBorderPadding.TopBottom(wm);
if ((aBStartMarginRoot && !logicalSkipSides.BStart()) ||
0 != mBorderPadding.BStart(wm)) {
mFlags.mIsBStartMarginRoot = true;
mFlags.mShouldApplyBStartMargin = true;
}
if ((aBEndMarginRoot && !logicalSkipSides.BEnd()) ||
0 != mBorderPadding.BEnd(wm)) {
mFlags.mIsBEndMarginRoot = true;
}
if (aBlockNeedsFloatManager) {
mFlags.mBlockNeedsFloatManager = true;
}
mFloatManager = aReflowInput.mFloatManager;
NS_ASSERTION(mFloatManager,
"FloatManager should be set in BlockReflowInput" );
if (mFloatManager) {
// Save the coordinate system origin for later.
mFloatManager->GetTranslation(mFloatManagerI, mFloatManagerB);
mFloatManager->PushState(&mFloatManagerStateBefore); // never popped
}
mReflowStatus = NS_FRAME_COMPLETE;
mNextInFlow = static_cast<nsBlockFrame*>(mBlock->GetNextInFlow());
LAYOUT_WARN_IF_FALSE(NS_UNCONSTRAINEDSIZE != aReflowInput.ComputedISize(),
"have unconstrained width; this should only result "
"from very large sizes, not attempts at intrinsic "
"width calculation");
mContentArea.ISize(wm) = aReflowInput.ComputedISize();
// Compute content area height. Unlike the width, if we have a
// specified style height we ignore it since extra content is
// managed by the "overflow" property. When we don't have a
// specified style height then we may end up limiting our height if
// the availableHeight is constrained (this situation occurs when we
// are paginated).
if (NS_UNCONSTRAINEDSIZE != aReflowInput.AvailableBSize()) {
// We are in a paginated situation. The bottom edge is just inside
// the bottom border and padding. The content area height doesn't
// include either border or padding edge.
mBEndEdge = aReflowInput.AvailableBSize() - mBorderPadding.BEnd(wm);
mContentArea.BSize(wm) = std::max(0, mBEndEdge - mBorderPadding.BStart(wm));
}
else {
// When we are not in a paginated situation then we always use
// a constrained height.
mFlags.mHasUnconstrainedBSize = true;
mContentArea.BSize(wm) = mBEndEdge = NS_UNCONSTRAINEDSIZE;
}
mContentArea.IStart(wm) = mBorderPadding.IStart(wm);
mBCoord = mContentArea.BStart(wm) = mBorderPadding.BStart(wm);
mPrevChild = nullptr;
mCurrentLine = aFrame->LinesEnd();
mMinLineHeight = aReflowInput.CalcLineHeight();
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
const WritingMode myWM = aReflowInput.GetWritingMode();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
const nscoord borderBoxISize = aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
const bool isBSizeShrinkWrapping = (contentBoxBSize == NS_INTRINSICSIZE);
nscoord borderBoxBSize;
if (!isBSizeShrinkWrapping) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
nsMargin borderPadding = aReflowInput.ComputedPhysicalBorderPadding();
// Reflow the child frames. We may have up to three: an image
// frame (for the poster image), a container frame for the controls,
// and a container frame for the caption.
for (nsIFrame* child : mFrames) {
nsSize oldChildSize = child->GetSize();
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(borderPadding.left, borderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
// Android still uses XUL media controls & hence needs this XUL-friendly
// custom reflow code. This will go away in bug 1310907.
#ifdef ANDROID
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(borderPadding.left,
borderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
#endif // ANDROID
} else if (child->GetContent() == mCaptionDiv ||
child->GetContent() == mVideoControls) {
// Reflow the caption and control bar frames.
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.ComputedSize(wm);
availableSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize);
ReflowOutput kidDesiredSize(kidReflowInput);
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
borderPadding.left, borderPadding.top, 0, aStatus);
if (child->GetContent() == mVideoControls && isBSizeShrinkWrapping) {
// Resolve our own BSize based on the controls' size in the same axis.
contentBoxBSize = myWM.IsOrthogonalTo(wm) ?
kidDesiredSize.ISize(wm) : kidDesiredSize.BSize(wm);
}
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
borderPadding.left, borderPadding.top, 0);
}
if (child->GetContent() == mVideoControls && child->GetSize() != oldChildSize) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
}
if (isBSizeShrinkWrapping) {
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We didn't get a BSize from our intrinsic size/ratio, nor did we
// get one from our controls. Just use BSize of 0.
contentBoxBSize = 0;
}
contentBoxBSize = NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aMetrics.SetSize(myWM, logicalDesiredSize);
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
ReflowOutput& aButtonDesiredSize,
const ReflowInput& aButtonReflowInput,
nsIFrame* aFirstKid)
{
WritingMode wm = GetWritingMode();
LogicalSize availSize = aButtonReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
LogicalMargin focusPadding =
LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());
// See whether out availSize's inline-size is big enough. If it's
// smaller than our intrinsic min iSize, that means that the kid
// wouldn't really fit. In that case, we overflow into our internal
// focuspadding (which other browsers don't have) so that there's a
// little more space for it.
// Note that GetMinISize includes the focusPadding.
nscoord IOverflow = GetMinISize(aButtonReflowInput.mRenderingContext) -
aButtonReflowInput.ComputedISize();
nscoord IFocusPadding = focusPadding.IStartEnd(wm);
nscoord focusPaddingReduction = std::min(IFocusPadding,
std::max(IOverflow, 0));
if (focusPaddingReduction > 0) {
nscoord startReduction = focusPadding.IStart(wm);
if (focusPaddingReduction != IFocusPadding) {
startReduction = NSToCoordRound(startReduction *
(float(focusPaddingReduction) /
float(IFocusPadding)));
}
focusPadding.IStart(wm) -= startReduction;
focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
}
// shorthand for a value we need to use in a bunch of places
const LogicalMargin& clbp = aButtonReflowInput.ComputedLogicalBorderPadding();
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= focusPadding.IStartEnd(wm);
LogicalPoint childPos(wm);
childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
ReflowInput adjustedButtonReflowInput =
CloneReflowInputWithReducedContentBox(aButtonReflowInput, focusPadding);
ReflowInput contentsReflowInput(aPresContext,
adjustedButtonReflowInput,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
ReflowOutput contentsDesiredSize(aButtonReflowInput);
childPos.B(wm) = 0; // This will be set properly later, after reflowing the
// child to determine its size.
// We just pass a dummy containerSize here, as the child will be
// repositioned later by FinishReflowChild.
nsSize dummyContainerSize;
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowInput,
wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box size:
LogicalSize buttonContentBox(wm);
if (aButtonReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
// Button has a fixed block-size -- that's its content-box bSize.
buttonContentBox.BSize(wm) = aButtonReflowInput.ComputedBSize();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' bSize, plus any focus-padding space:
buttonContentBox.BSize(wm) =
contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);
// Make sure we obey min/max-bSize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxBSize and
// mComputedMinBSize are content bSizes.
buttonContentBox.BSize(wm) =
NS_CSS_MINMAX(buttonContentBox.BSize(wm),
aButtonReflowInput.ComputedMinBSize(),
aButtonReflowInput.ComputedMaxBSize());
}
if (aButtonReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
buttonContentBox.ISize(wm) = aButtonReflowInput.ComputedISize();
} else {
buttonContentBox.ISize(wm) =
contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
buttonContentBox.ISize(wm) =
NS_CSS_MINMAX(buttonContentBox.ISize(wm),
aButtonReflowInput.ComputedMinISize(),
aButtonReflowInput.ComputedMaxISize());
}
// Center child in the block-direction in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
contentsDesiredSize.BSize(wm);
childPos.B(wm) = std::max(0, extraSpace / 2);
// Adjust childPos.B() to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);
nsSize containerSize =
(buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowInput,
wm, childPos, containerSize, 0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
ReflowOutput::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowInput.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.SetSize(wm,
LogicalSize(wm, aButtonReflowInput.ComputedISize() + clbp.IStartEnd(wm),
buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));
// * Button's ascent is its child's ascent, plus the child's block-offset
// within our frame... unless it's orthogonal, in which case we'll use the
// contents inline-size as an approximation for now.
// XXX is there a better strategy? should we include border-padding?
if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
} else {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
childPos.B(wm));
}
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}
/* virtual */ void
nsRubyBaseContainerFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsRubyBaseContainerFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
aStatus = NS_FRAME_COMPLETE;
if (!aReflowInput.mLineLayout) {
NS_ASSERTION(
aReflowInput.mLineLayout,
"No line layout provided to RubyBaseContainerFrame reflow method.");
return;
}
mDescendantLeadings.Reset();
MoveOverflowToChildList();
// Ask text containers to drain overflows
AutoRubyTextContainerArray textContainers(this);
const uint32_t rtcCount = textContainers.Length();
for (uint32_t i = 0; i < rtcCount; i++) {
textContainers[i]->MoveOverflowToChildList();
}
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalSize availSize(lineWM, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
// We have a reflow state and a line layout for each RTC.
// They are conceptually the state of the RTCs, but we don't actually
// reflow those RTCs in this code. These two arrays are holders of
// the reflow states and line layouts.
// Since there are pointers refer to reflow states and line layouts,
// it is necessary to guarantee that they won't be moved. For this
// reason, they are wrapped in UniquePtr here.
AutoTArray<UniquePtr<ReflowInput>, RTC_ARRAY_SIZE> reflowInputs;
AutoTArray<UniquePtr<nsLineLayout>, RTC_ARRAY_SIZE> lineLayouts;
reflowInputs.SetCapacity(rtcCount);
lineLayouts.SetCapacity(rtcCount);
// Begin the line layout for each ruby text container in advance.
bool hasSpan = false;
for (uint32_t i = 0; i < rtcCount; i++) {
nsRubyTextContainerFrame* textContainer = textContainers[i];
if (textContainer->IsSpanContainer()) {
hasSpan = true;
}
ReflowInput* reflowInput = new ReflowInput(
aPresContext, *aReflowInput.mParentReflowInput, textContainer,
availSize.ConvertTo(textContainer->GetWritingMode(), lineWM));
reflowInputs.AppendElement(reflowInput);
nsLineLayout* lineLayout = new nsLineLayout(aPresContext,
reflowInput->mFloatManager,
reflowInput, nullptr,
aReflowInput.mLineLayout);
lineLayout->SetSuppressLineWrap(true);
lineLayouts.AppendElement(lineLayout);
// Line number is useless for ruby text
// XXX nullptr here may cause problem, see comments for
// nsLineLayout::mBlockRI and nsLineLayout::AddFloat
lineLayout->Init(nullptr, reflowInput->CalcLineHeight(), -1);
reflowInput->mLineLayout = lineLayout;
// Border and padding are suppressed on ruby text containers.
// If the writing mode is vertical-rl, the horizontal position of
// rt frames will be updated when reflowing this text container,
// hence leave container size 0 here for now.
lineLayout->BeginLineReflow(0, 0, reflowInput->ComputedISize(),
NS_UNCONSTRAINEDSIZE,
false, false, lineWM, nsSize(0, 0));
lineLayout->AttachRootFrameToBaseLineLayout();
}
aReflowInput.mLineLayout->BeginSpan(this, &aReflowInput,
0, aReflowInput.AvailableISize(),
&mBaseline);
bool allowInitialLineBreak, allowLineBreak;
GetIsLineBreakAllowed(this, aReflowInput.mLineLayout->LineIsBreakable(),
&allowInitialLineBreak, &allowLineBreak);
nscoord isize = 0;
// Reflow columns excluding any span
RubyReflowInput reflowInput = {
allowInitialLineBreak, allowLineBreak && !hasSpan,
textContainers, aReflowInput, reflowInputs
};
isize = ReflowColumns(reflowInput, aStatus);
DebugOnly<nscoord> lineSpanSize = aReflowInput.mLineLayout->EndSpan(this);
aDesiredSize.ISize(lineWM) = isize;
// When there are no frames inside the ruby base container, EndSpan
// will return 0. However, in this case, the actual width of the
// container could be non-zero because of non-empty ruby annotations.
// XXX When bug 765861 gets fixed, this warning should be upgraded.
NS_WARNING_ASSERTION(
NS_INLINE_IS_BREAK(aStatus) || isize == lineSpanSize || mFrames.IsEmpty(),
"bad isize");
// If there exists any span, the columns must either be completely
// reflowed, or be not reflowed at all.
MOZ_ASSERT(NS_INLINE_IS_BREAK_BEFORE(aStatus) ||
NS_FRAME_IS_COMPLETE(aStatus) || !hasSpan);
if (!NS_INLINE_IS_BREAK_BEFORE(aStatus) &&
NS_FRAME_IS_COMPLETE(aStatus) && hasSpan) {
// Reflow spans
RubyReflowInput reflowInput = {
false, false, textContainers, aReflowInput, reflowInputs
};
nscoord spanISize = ReflowSpans(reflowInput);
isize = std::max(isize, spanISize);
}
for (uint32_t i = 0; i < rtcCount; i++) {
// It happens before the ruby text container is reflowed, and that
// when it is reflowed, it will just use this size.
nsRubyTextContainerFrame* textContainer = textContainers[i];
nsLineLayout* lineLayout = lineLayouts[i].get();
RubyUtils::ClearReservedISize(textContainer);
nscoord rtcISize = lineLayout->GetCurrentICoord();
// Only span containers and containers with collapsed annotations
// need reserving isize. For normal ruby text containers, their
// children will be expanded properly. We only need to expand their
// own size.
if (!textContainer->IsSpanContainer()) {
rtcISize = isize;
} else if (isize > rtcISize) {
RubyUtils::SetReservedISize(textContainer, isize - rtcISize);
}
lineLayout->VerticalAlignLine();
textContainer->SetISize(rtcISize);
lineLayout->EndLineReflow();
}
// Border and padding are suppressed on ruby base container,
// create a fake borderPadding for setting BSize.
WritingMode frameWM = aReflowInput.GetWritingMode();
LogicalMargin borderPadding(frameWM);
nsLayoutUtils::SetBSizeFromFontMetrics(this, aDesiredSize,
borderPadding, lineWM, frameWM);
}
