void
nsTableWrapperFrame::OuterDoReflowChild(nsPresContext* aPresContext,
nsIFrame* aChildFrame,
const ReflowInput& aChildRI,
ReflowOutput& aMetrics,
nsReflowStatus& aStatus)
{
// Using zero as containerSize here because we want consistency between
// the GetLogicalPosition and ReflowChild calls, to avoid unnecessarily
// changing the frame's coordinates; but we don't yet know its final
// position anyway so the actual value is unimportant.
const nsSize zeroCSize;
WritingMode wm = aChildRI.GetWritingMode();
// Use the current position as a best guess for placement.
LogicalPoint childPt = aChildFrame->GetLogicalPosition(wm, zeroCSize);
uint32_t flags = NS_FRAME_NO_MOVE_FRAME;
// We don't want to delete our next-in-flow's child if it's an inner table
// frame, because table wrapper frames always assume that their inner table
// frames don't go away. If a table wrapper frame is removed because it is
// a next-in-flow of an already complete table wrapper frame, then it will
// take care of removing it's inner table frame.
if (aChildFrame == InnerTableFrame()) {
flags |= NS_FRAME_NO_DELETE_NEXT_IN_FLOW_CHILD;
}
ReflowChild(aChildFrame, aPresContext, aMetrics, aChildRI,
wm, childPt, zeroCSize, flags, aStatus);
}
void
nsTableWrapperFrame::InitChildReflowInput(nsPresContext& aPresContext,
ReflowInput& aReflowInput)
{
nsMargin collapseBorder;
nsMargin collapsePadding(0,0,0,0);
nsMargin* pCollapseBorder = nullptr;
nsMargin* pCollapsePadding = nullptr;
Maybe<LogicalSize> cbSize;
if (aReflowInput.mFrame == InnerTableFrame()) {
WritingMode wm = aReflowInput.GetWritingMode();
if (InnerTableFrame()->IsBorderCollapse()) {
LogicalMargin border = InnerTableFrame()->GetIncludedOuterBCBorder(wm);
collapseBorder = border.GetPhysicalMargin(wm);
pCollapseBorder = &collapseBorder;
pCollapsePadding = &collapsePadding;
}
// Propagate our stored CB size if present, minus any margins.
if (!HasAnyStateBits(NS_FRAME_OUT_OF_FLOW)) {
LogicalSize* cb = Properties().Get(GridItemCBSizeProperty());
if (cb) {
cbSize.emplace(*cb);
*cbSize -= aReflowInput.ComputedLogicalMargin().Size(wm);
}
}
}
aReflowInput.Init(&aPresContext, cbSize.ptrOr(nullptr), pCollapseBorder,
pCollapsePadding);
}
void
nsSVGForeignObjectFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MOZ_ASSERT(!(GetStateBits() & NS_FRAME_IS_NONDISPLAY),
"Should not have been called");
// Only InvalidateAndScheduleBoundsUpdate marks us with NS_FRAME_IS_DIRTY,
// so if that bit is still set we still have a resize pending. If we hit
// this assertion, then we should get the presShell to skip reflow roots
// that have a dirty parent since a reflow is going to come via the
// reflow root's parent anyway.
NS_ASSERTION(!(GetStateBits() & NS_FRAME_IS_DIRTY),
"Reflowing while a resize is pending is wasteful");
// ReflowSVG makes sure mRect is up to date before we're called.
NS_ASSERTION(!aReflowInput.mParentReflowInput,
"should only get reflow from being reflow root");
NS_ASSERTION(aReflowInput.ComputedWidth() == GetSize().width &&
aReflowInput.ComputedHeight() == GetSize().height,
"reflow roots should be reflowed at existing size and "
"svg.css should ensure we have no padding/border/margin");
DoReflow();
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm, aReflowInput.ComputedISize(),
aReflowInput.ComputedBSize());
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
aStatus = NS_FRAME_COMPLETE;
}
// Return the inline-size that the float (including margins) will take up
// in the writing mode of the containing block. If this returns
// NS_UNCONSTRAINEDSIZE, we're dealing with an orthogonal block that
// has block-size:auto, and we'll need to actually reflow it to find out
// how much inline-size it will occupy in the containing block's mode.
static nscoord
FloatMarginISize(const ReflowInput& aCBReflowInput,
nscoord aFloatAvailableISize,
nsIFrame *aFloat,
const SizeComputationInput& aFloatOffsetState)
{
AutoMaybeDisableFontInflation an(aFloat);
WritingMode wm = aFloatOffsetState.GetWritingMode();
LogicalSize floatSize =
aFloat->ComputeSize(
aCBReflowInput.mRenderingContext,
wm,
aCBReflowInput.ComputedSize(wm),
aFloatAvailableISize,
aFloatOffsetState.ComputedLogicalMargin().Size(wm),
aFloatOffsetState.ComputedLogicalBorderPadding().Size(wm) -
aFloatOffsetState.ComputedLogicalPadding().Size(wm),
aFloatOffsetState.ComputedLogicalPadding().Size(wm),
nsIFrame::ComputeSizeFlags::eShrinkWrap);
WritingMode cbwm = aCBReflowInput.GetWritingMode();
nscoord floatISize = floatSize.ConvertTo(cbwm, wm).ISize(cbwm);
if (floatISize == NS_UNCONSTRAINEDSIZE) {
return NS_UNCONSTRAINEDSIZE; // reflow is needed to get the true size
}
return floatISize +
aFloatOffsetState.ComputedLogicalMargin().Size(wm).
ConvertTo(cbwm, wm).ISize(cbwm) +
aFloatOffsetState.ComputedLogicalBorderPadding().Size(wm).
ConvertTo(cbwm, wm).ISize(cbwm);
}
void
nsProgressFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsProgressFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mBarDiv, "Progress bar div must exist!");
NS_ASSERTION(!GetPrevContinuation(),
"nsProgressFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first.");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
nsIFrame* barFrame = mBarDiv->GetPrimaryFrame();
NS_ASSERTION(barFrame, "The progress frame should have a child with a frame!");
ReflowBarFrame(barFrame, aPresContext, aReflowInput, aStatus);
aDesiredSize.SetSize(aReflowInput.GetWritingMode(),
aReflowInput.ComputedSizeWithBorderPadding());
aDesiredSize.SetOverflowAreasToDesiredBounds();
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, barFrame);
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsTextControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTextControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// make sure that the form registers itself on the initial/first reflow
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
// set values of reflow's out parameters
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize
finalSize(wm,
aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(wm),
aReflowInput.ComputedBSize() +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(wm));
aDesiredSize.SetSize(wm, finalSize);
// computation of the ascent wrt the input height
nscoord lineHeight = aReflowInput.ComputedBSize();
float inflation = nsLayoutUtils::FontSizeInflationFor(this);
if (!IsSingleLineTextControl()) {
lineHeight = ReflowInput::CalcLineHeight(GetContent(), StyleContext(),
NS_AUTOHEIGHT, inflation);
}
RefPtr<nsFontMetrics> fontMet =
nsLayoutUtils::GetFontMetricsForFrame(this, inflation);
// now adjust for our borders and padding
aDesiredSize.SetBlockStartAscent(
nsLayoutUtils::GetCenteredFontBaseline(fontMet, lineHeight,
wm.IsLineInverted()) +
aReflowInput.ComputedLogicalBorderPadding().BStart(wm));
// overflow handling
aDesiredSize.SetOverflowAreasToDesiredBounds();
// perform reflow on all kids
nsIFrame* kid = mFrames.FirstChild();
while (kid) {
ReflowTextControlChild(kid, aPresContext, aReflowInput, aStatus, aDesiredSize);
kid = kid->GetNextSibling();
}
// take into account css properties that affect overflow handling
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
static nscoord
GetAvailableContentISize(const ReflowInput& aReflowInput)
{
if (aReflowInput.AvailableISize() == NS_INTRINSICSIZE) {
return NS_INTRINSICSIZE;
}
WritingMode wm = aReflowInput.GetWritingMode();
nscoord borderPaddingISize =
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(wm);
return std::max(0, aReflowInput.AvailableISize() - borderPaddingISize);
}
nscoord
nsColumnSetFrame::GetAvailableContentBSize(const ReflowInput& aReflowInput)
{
if (aReflowInput.AvailableBSize() == NS_INTRINSICSIZE) {
return NS_INTRINSICSIZE;
}
WritingMode wm = aReflowInput.GetWritingMode();
LogicalMargin bp = aReflowInput.ComputedLogicalBorderPadding();
bp.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));
bp.BEnd(wm) = aReflowInput.ComputedLogicalBorderPadding().BEnd(wm);
return std::max(0, aReflowInput.AvailableBSize() - bp.BStartEnd(wm));
}
void
nsTableWrapperFrame::InitChildReflowInput(nsPresContext& aPresContext,
ReflowInput& aReflowInput)
{
nsMargin collapseBorder;
nsMargin collapsePadding(0,0,0,0);
nsMargin* pCollapseBorder = nullptr;
nsMargin* pCollapsePadding = nullptr;
if (aReflowInput.mFrame == InnerTableFrame() &&
InnerTableFrame()->IsBorderCollapse()) {
WritingMode wm = aReflowInput.GetWritingMode();
LogicalMargin border = InnerTableFrame()->GetIncludedOuterBCBorder(wm);
collapseBorder = border.GetPhysicalMargin(wm);
pCollapseBorder = &collapseBorder;
pCollapsePadding = &collapsePadding;
}
aReflowInput.Init(&aPresContext, nullptr, pCollapseBorder, pCollapsePadding);
}
nscoord
nsSplittableFrame::GetEffectiveComputedBSize(const ReflowInput& aReflowInput,
nscoord aConsumedBSize) const
{
nscoord bSize = aReflowInput.ComputedBSize();
if (bSize == NS_INTRINSICSIZE) {
return NS_INTRINSICSIZE;
}
if (aConsumedBSize == NS_INTRINSICSIZE) {
aConsumedBSize = ConsumedBSize(aReflowInput.GetWritingMode());
}
bSize -= aConsumedBSize;
// We may have stretched the frame beyond its computed height. Oh well.
return std::max(0, bSize);
}
/* virtual */ void
nsBackdropFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsBackdropFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// Note that this frame is a child of the viewport frame.
WritingMode wm = aReflowInput.GetWritingMode();
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord isize = aReflowInput.ComputedISize() + borderPadding.IStartEnd(wm);
nscoord bsize = aReflowInput.ComputedBSize() + borderPadding.BStartEnd(wm);
aDesiredSize.SetSize(wm, LogicalSize(wm, isize, bsize));
aStatus = NS_FRAME_COMPLETE;
}
void
nsSimplePageSequenceFrame::SetDesiredSize(ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nscoord aWidth,
nscoord aHeight)
{
// Aim to fill the whole size of the document, not only so we
// can act as a background in print preview but also handle overflow
// in child page frames correctly.
// Use availableISize so we don't cause a needless horizontal scrollbar.
WritingMode wm = aReflowInput.GetWritingMode();
nscoord scaledWidth = aWidth * PresContext()->GetPrintPreviewScale();
nscoord scaledHeight = aHeight * PresContext()->GetPrintPreviewScale();
nscoord scaledISize = (wm.IsVertical() ? scaledHeight : scaledWidth);
nscoord scaledBSize = (wm.IsVertical() ? scaledWidth : scaledHeight);
aDesiredSize.ISize(wm) = std::max(scaledISize, aReflowInput.AvailableISize());
aDesiredSize.BSize(wm) = std::max(scaledBSize, aReflowInput.ComputedBSize());
}
// Helper-function that lets us clone the button's reflow state, but with its
// ComputedWidth and ComputedHeight reduced by the amount of renderer-specific
// focus border and padding that we're using. (This lets us provide a more
// appropriate content-box size for descendents' percent sizes to resolve
// against.)
static ReflowInput
CloneReflowInputWithReducedContentBox(
const ReflowInput& aButtonReflowInput,
const LogicalMargin& aFocusPadding)
{
auto wm = aButtonReflowInput.GetWritingMode();
nscoord adjustedISize = aButtonReflowInput.ComputedISize();
adjustedISize -= aFocusPadding.IStartEnd(wm);
adjustedISize = std::max(0, adjustedISize);
// (Only adjust the block-size if it's an actual length.)
nscoord adjustedBSize = aButtonReflowInput.ComputedBSize();
if (adjustedBSize != NS_INTRINSICSIZE) {
adjustedBSize -= aFocusPadding.BStartEnd(wm);
adjustedBSize = std::max(0, adjustedBSize);
}
ReflowInput clone(aButtonReflowInput);
clone.SetComputedISize(adjustedISize);
clone.SetComputedBSize(adjustedBSize);
return clone;
}
// get the margin and padding data. ReflowInput doesn't handle the
// case of auto margins
void
nsTableWrapperFrame::GetChildMargin(nsPresContext* aPresContext,
const ReflowInput& aOuterRI,
nsIFrame* aChildFrame,
nscoord aAvailISize,
LogicalMargin& aMargin)
{
NS_ASSERTION(!aChildFrame->IsTableCaption(),
"didn't expect caption frame; writing-mode may be wrong!");
// construct a reflow state to compute margin and padding. Auto margins
// will not be computed at this time.
// create and init the child reflow state
// XXX We really shouldn't construct a reflow state to do this.
WritingMode wm = aOuterRI.GetWritingMode();
LogicalSize availSize(wm, aAvailISize, aOuterRI.AvailableSize(wm).BSize(wm));
ReflowInput childRI(aPresContext, aOuterRI, aChildFrame, availSize,
nullptr, ReflowInput::CALLER_WILL_INIT);
InitChildReflowInput(*aPresContext, childRI);
aMargin = childRI.ComputedLogicalMargin();
}
/**
* This function returns the offset of an abs/fixed-pos child's static
* position, with respect to the "start" corner of its alignment container,
* according to CSS Box Alignment. This function only operates in a single
* axis at a time -- callers can choose which axis via the |aAbsPosCBAxis|
* parameter.
*
* @param aKidReflowInput The ReflowInput for the to-be-aligned abspos child.
* @param aKidSizeInAbsPosCBWM The child frame's size (after it's been given
* the opportunity to reflow), in terms of the
* containing block's WritingMode.
* @param aPlaceholderContainer The parent of the child frame's corresponding
* placeholder frame, cast to a nsContainerFrame.
* (This will help us choose which alignment enum
* we should use for the child.)
* @param aAbsPosCBWM The child frame's containing block's WritingMode.
* @param aAbsPosCBAxis The axis (of the containing block) that we should
* be doing this computation for.
*/
static nscoord
OffsetToAlignedStaticPos(const ReflowInput& aKidReflowInput,
const LogicalSize& aKidSizeInAbsPosCBWM,
nsContainerFrame* aPlaceholderContainer,
WritingMode aAbsPosCBWM,
LogicalAxis aAbsPosCBAxis)
{
if (!aPlaceholderContainer) {
// (The placeholder container should be the thing that kicks this whole
// process off, by setting PLACEHOLDER_STATICPOS_NEEDS_CSSALIGN. So it
// should exist... but bail gracefully if it doesn't.)
NS_ERROR("Missing placeholder-container when computing a "
"CSS Box Alignment static position");
return 0;
}
// (Most of this function is simply preparing args that we'll pass to
// AlignJustifySelf at the end.)
// NOTE: Our alignment container is aPlaceholderContainer's content-box
// (or an area within it, if aPlaceholderContainer is a grid). So, we'll
// perform most of our arithmetic/alignment in aPlaceholderContainer's
// WritingMode. For brevity, we use the abbreviation "pc" for "placeholder
// container" in variables below.
WritingMode pcWM = aPlaceholderContainer->GetWritingMode();
// Find what axis aAbsPosCBAxis corresponds to, in placeholder's parent's
// writing-mode.
LogicalAxis pcAxis = (pcWM.IsOrthogonalTo(aAbsPosCBWM)
? GetOrthogonalAxis(aAbsPosCBAxis)
: aAbsPosCBAxis);
nsIAtom* parentType = aPlaceholderContainer->GetType();
LogicalSize alignAreaSize(pcWM);
if (parentType == nsGkAtoms::flexContainerFrame) {
alignAreaSize = aPlaceholderContainer->GetLogicalSize(pcWM);
LogicalMargin pcBorderPadding =
aPlaceholderContainer->GetLogicalUsedBorderAndPadding(pcWM);
alignAreaSize -= pcBorderPadding.Size(pcWM);
} else {
NS_ERROR("Unsupported container for abpsos CSS Box Alignment");
return 0; // (leave the child at the start of its alignment container)
}
nscoord alignAreaSizeInAxis = (pcAxis == eLogicalAxisInline)
? alignAreaSize.ISize(pcWM)
: alignAreaSize.BSize(pcWM);
AlignJustifyFlags flags = AlignJustifyFlags::eIgnoreAutoMargins;
uint16_t alignConst =
aPlaceholderContainer->CSSAlignmentForAbsPosChild(aKidReflowInput, pcAxis);
// XXXdholbert: Handle <overflow-position> in bug 1311892 (by conditionally
// setting AlignJustifyFlags::eOverflowSafe in |flags|.) For now, we behave
// as if "unsafe" was the specified value (which is basically equivalent to
// the default behavior, when no value is specified -- though the default
// behavior also has some [at-risk] extra nuance about scroll containers...)
// For now we ignore & strip off <overflow-position> bits, until bug 1311892.
alignConst &= ~NS_STYLE_ALIGN_FLAG_BITS;
// Find out if placeholder-container & the OOF child have the same start-sides
// in the placeholder-container's pcAxis.
WritingMode kidWM = aKidReflowInput.GetWritingMode();
if (pcWM.ParallelAxisStartsOnSameSide(pcAxis, kidWM)) {
flags |= AlignJustifyFlags::eSameSide;
}
// (baselineAdjust is unused. CSSAlignmentForAbsPosChild() should've
// converted 'baseline'/'last baseline' enums to their fallback values.)
const nscoord baselineAdjust = nscoord(0);
// AlignJustifySelf operates in the kid's writing mode, so we need to
// represent the child's size and the desired axis in that writing mode:
LogicalSize kidSizeInOwnWM = aKidSizeInAbsPosCBWM.ConvertTo(kidWM,
aAbsPosCBWM);
LogicalAxis kidAxis = (kidWM.IsOrthogonalTo(aAbsPosCBWM)
? GetOrthogonalAxis(aAbsPosCBAxis)
: aAbsPosCBAxis);
nscoord offset =
CSSAlignUtils::AlignJustifySelf(alignConst, kidAxis, flags,
baselineAdjust, alignAreaSizeInAxis,
aKidReflowInput, kidSizeInOwnWM);
// "offset" is in terms of the CSS Box Alignment container (i.e. it's in
// terms of pcWM). But our return value needs to in terms of the containing
// block's writing mode, which might have the opposite directionality in the
// given axis. In that case, we just need to negate "offset" when returning,
// to make it have the right effect as an offset for coordinates in the
// containing block's writing mode.
if (!pcWM.ParallelAxisStartsOnSameSide(pcAxis, aAbsPosCBWM)) {
return -offset;
}
return offset;
}
void
nsTableCellFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTableCellFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
FirstInFlow()->AddStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW);
}
// see if a special bsize reflow needs to occur due to having a pct height
nsTableFrame::CheckRequestSpecialBSizeReflow(aReflowInput);
aStatus = NS_FRAME_COMPLETE;
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize(wm, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
LogicalMargin borderPadding = aReflowInput.ComputedLogicalPadding();
LogicalMargin border = GetBorderWidth(wm);
borderPadding += border;
// reduce available space by insets, if we're in a constrained situation
availSize.ISize(wm) -= borderPadding.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= borderPadding.BStartEnd(wm);
}
// Try to reflow the child into the available space. It might not
// fit or might need continuing.
if (availSize.BSize(wm) < 0) {
availSize.BSize(wm) = 1;
}
ReflowOutput kidSize(wm, aDesiredSize.mFlags);
kidSize.ClearSize();
SetPriorAvailISize(aReflowInput.AvailableISize());
nsIFrame* firstKid = mFrames.FirstChild();
NS_ASSERTION(firstKid, "Frame construction error, a table cell always has an inner cell frame");
nsTableFrame* tableFrame = GetTableFrame();
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
const_cast<ReflowInput&>(aReflowInput).
SetComputedBSize(BSize(wm) - borderPadding.BStartEnd(wm));
DISPLAY_REFLOW_CHANGE();
}
else if (aPresContext->IsPaginated()) {
nscoord computedUnpaginatedBSize =
CalcUnpaginatedBSize((nsTableCellFrame&)*this,
*tableFrame, borderPadding.BStartEnd(wm));
if (computedUnpaginatedBSize > 0) {
const_cast<ReflowInput&>(aReflowInput).SetComputedBSize(computedUnpaginatedBSize);
DISPLAY_REFLOW_CHANGE();
}
}
else {
SetHasPctOverBSize(false);
}
WritingMode kidWM = firstKid->GetWritingMode();
ReflowInput kidReflowInput(aPresContext, aReflowInput, firstKid,
availSize.ConvertTo(kidWM, wm));
// Don't be a percent height observer if we're in the middle of
// special-bsize reflow, in case we get an accidental NotifyPercentBSize()
// call (which we shouldn't honor during special-bsize reflow)
if (!aReflowInput.mFlags.mSpecialBSizeReflow) {
// mPercentBSizeObserver is for children of cells in quirks mode,
// but only those than are tables in standards mode. NeedsToObserve
// will determine how far this is propagated to descendants.
kidReflowInput.mPercentBSizeObserver = this;
}
// Don't propagate special bsize reflow state to our kids
kidReflowInput.mFlags.mSpecialBSizeReflow = false;
if (aReflowInput.mFlags.mSpecialBSizeReflow ||
FirstInFlow()->HasAnyStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW)) {
// We need to force the kid to have mBResize set if we've had a
// special reflow in the past, since the non-special reflow needs to
// resize back to what it was without the special bsize reflow.
kidReflowInput.SetBResize(true);
}
nsSize containerSize =
aReflowInput.ComputedSizeAsContainerIfConstrained();
LogicalPoint kidOrigin(wm, borderPadding.IStart(wm),
borderPadding.BStart(wm));
nsRect origRect = firstKid->GetRect();
nsRect origVisualOverflow = firstKid->GetVisualOverflowRect();
bool firstReflow = firstKid->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
ReflowChild(firstKid, aPresContext, kidSize, kidReflowInput,
wm, kidOrigin, containerSize, 0, aStatus);
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
// Don't pass OVERFLOW_INCOMPLETE through tables until they can actually handle it
//XXX should paginate overflow as overflow, but not in this patch (bug 379349)
NS_FRAME_SET_INCOMPLETE(aStatus);
printf("Set table cell incomplete %p\n", static_cast<void*>(this));
}
// XXXbz is this invalidate actually needed, really?
if (HasAnyStateBits(NS_FRAME_IS_DIRTY)) {
InvalidateFrameSubtree();
}
#ifdef DEBUG
DebugCheckChildSize(firstKid, kidSize);
#endif
// 0 dimensioned cells need to be treated specially in Standard/NavQuirks mode
// see testcase "emptyCells.html"
nsIFrame* prevInFlow = GetPrevInFlow();
bool isEmpty;
if (prevInFlow) {
isEmpty = static_cast<nsTableCellFrame*>(prevInFlow)->GetContentEmpty();
} else {
isEmpty = !CellHasVisibleContent(kidSize.Height(), tableFrame, firstKid);
}
SetContentEmpty(isEmpty);
// Place the child
FinishReflowChild(firstKid, aPresContext, kidSize, &kidReflowInput,
wm, kidOrigin, containerSize, 0);
nsTableFrame::InvalidateTableFrame(firstKid, origRect, origVisualOverflow,
firstReflow);
// first, compute the bsize which can be set w/o being restricted by
// available bsize
LogicalSize cellSize(wm);
cellSize.BSize(wm) = kidSize.BSize(wm);
if (NS_UNCONSTRAINEDSIZE != cellSize.BSize(wm)) {
cellSize.BSize(wm) += borderPadding.BStartEnd(wm);
}
// next determine the cell's isize
cellSize.ISize(wm) = kidSize.ISize(wm); // at this point, we've factored in the cell's style attributes
// factor in border and padding
if (NS_UNCONSTRAINEDSIZE != cellSize.ISize(wm)) {
cellSize.ISize(wm) += borderPadding.IStartEnd(wm);
}
// set the cell's desired size and max element size
aDesiredSize.SetSize(wm, cellSize);
// the overflow area will be computed when BlockDirAlignChild() gets called
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
if (aDesiredSize.BSize(wm) > BSize(wm)) {
// set a bit indicating that the pct bsize contents exceeded
// the height that they could honor in the pass 2 reflow
SetHasPctOverBSize(true);
}
if (NS_UNCONSTRAINEDSIZE == aReflowInput.AvailableBSize()) {
aDesiredSize.BSize(wm) = BSize(wm);
}
}
// If our parent is in initial reflow, it'll handle invalidating our
// entire overflow rect.
if (!GetParent()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW) &&
nsSize(aDesiredSize.Width(), aDesiredSize.Height()) != mRect.Size()) {
InvalidateFrame();
}
// remember the desired size for this reflow
SetDesiredSize(aDesiredSize);
// Any absolutely-positioned children will get reflowed in
// nsFrame::FixupPositionedTableParts in another pass, so propagate our
// dirtiness to them before our parent clears our dirty bits.
PushDirtyBitToAbsoluteFrames();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsSubDocumentFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsSubDocumentFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsSubDocumentFrame::Reflow: maxSize=%d,%d",
aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));
NS_ASSERTION(aReflowInput.ComputedWidth() != NS_UNCONSTRAINEDSIZE,
"Shouldn't have unconstrained stuff here "
"thanks to the rules of reflow");
NS_ASSERTION(NS_INTRINSICSIZE != aReflowInput.ComputedHeight(),
"Shouldn't have unconstrained stuff here "
"thanks to ComputeAutoSize");
aStatus = NS_FRAME_COMPLETE;
NS_ASSERTION(mContent->GetPrimaryFrame() == this,
"Shouldn't happen");
// XUL <iframe> or <browser>, or HTML <iframe>, <object> or <embed>
aDesiredSize.SetSize(aReflowInput.GetWritingMode(),
aReflowInput.ComputedSizeWithBorderPadding());
// "offset" is the offset of our content area from our frame's
// top-left corner.
nsPoint offset = nsPoint(aReflowInput.ComputedPhysicalBorderPadding().left,
aReflowInput.ComputedPhysicalBorderPadding().top);
if (mInnerView) {
const nsMargin& bp = aReflowInput.ComputedPhysicalBorderPadding();
nsSize innerSize(aDesiredSize.Width() - bp.LeftRight(),
aDesiredSize.Height() - bp.TopBottom());
// Size & position the view according to 'object-fit' & 'object-position'.
nsIFrame* subDocRoot = ObtainIntrinsicSizeFrame();
IntrinsicSize intrinsSize;
nsSize intrinsRatio;
if (subDocRoot) {
intrinsSize = subDocRoot->GetIntrinsicSize();
intrinsRatio = subDocRoot->GetIntrinsicRatio();
}
nsRect destRect =
nsLayoutUtils::ComputeObjectDestRect(nsRect(offset, innerSize),
intrinsSize, intrinsRatio,
StylePosition());
nsViewManager* vm = mInnerView->GetViewManager();
vm->MoveViewTo(mInnerView, destRect.x, destRect.y);
vm->ResizeView(mInnerView, nsRect(nsPoint(0, 0), destRect.Size()), true);
}
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (!ShouldClipSubdocument()) {
nsIFrame* subdocRootFrame = GetSubdocumentRootFrame();
if (subdocRootFrame) {
aDesiredSize.mOverflowAreas.UnionWith(subdocRootFrame->GetOverflowAreas() + offset);
}
}
FinishAndStoreOverflow(&aDesiredSize);
if (!aPresContext->IsPaginated() && !mPostedReflowCallback) {
PresContext()->PresShell()->PostReflowCallback(this);
mPostedReflowCallback = true;
}
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsSubDocumentFrame::Reflow: size=%d,%d status=%x",
aDesiredSize.Width(), aDesiredSize.Height(), aStatus));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
BRFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("BRFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm);
finalSize.BSize(wm) = 0; // BR frames with block size 0 are ignored in quirks
// mode by nsLineLayout::VerticalAlignFrames .
// However, it's not always 0. See below.
finalSize.ISize(wm) = 0;
aMetrics.SetBlockStartAscent(0);
// Only when the BR is operating in a line-layout situation will it
// behave like a BR. Additionally, we suppress breaks from BR inside
// of ruby frames. To determine if we're inside ruby, we have to rely
// on the *parent's* ShouldSuppressLineBreak() method, instead of our
// own, because we may have custom "display" value that makes our
// ShouldSuppressLineBreak() return false.
nsLineLayout* ll = aReflowInput.mLineLayout;
if (ll && !GetParent()->StyleContext()->ShouldSuppressLineBreak()) {
// Note that the compatibility mode check excludes AlmostStandards
// mode, since this is the inline box model. See bug 161691.
if ( ll->LineIsEmpty() ||
aPresContext->CompatibilityMode() == eCompatibility_FullStandards ) {
// The line is logically empty; any whitespace is trimmed away.
//
// If this frame is going to terminate the line we know
// that nothing else will go on the line. Therefore, in this
// case, we provide some height for the BR frame so that it
// creates some vertical whitespace. It's necessary to use the
// line-height rather than the font size because the
// quirks-mode fix that doesn't apply the block's min
// line-height makes this necessary to make BR cause a line
// of the full line-height
// We also do this in strict mode because BR should act like a
// normal inline frame. That line-height is used is important
// here for cases where the line-height is less than 1.
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetInflatedFontMetricsForFrame(this);
if (fm) {
nscoord logicalHeight = aReflowInput.CalcLineHeight();
finalSize.BSize(wm) = logicalHeight;
aMetrics.SetBlockStartAscent(nsLayoutUtils::GetCenteredFontBaseline(
fm, logicalHeight, wm.IsLineInverted()));
}
else {
aMetrics.SetBlockStartAscent(aMetrics.BSize(wm) = 0);
}
// XXX temporary until I figure out a better solution; see the
// code in nsLineLayout::VerticalAlignFrames that zaps minY/maxY
// if the width is zero.
// XXX This also fixes bug 10036!
// Warning: nsTextControlFrame::CalculateSizeStandard depends on
// the following line, see bug 228752.
// The code below in AddInlinePrefISize also adds 1 appunit to width
finalSize.ISize(wm) = 1;
}
// Return our reflow status
uint32_t breakType = aReflowInput.mStyleDisplay->PhysicalBreakType(wm);
if (NS_STYLE_CLEAR_NONE == breakType) {
breakType = NS_STYLE_CLEAR_LINE;
}
aStatus = NS_INLINE_BREAK | NS_INLINE_BREAK_AFTER |
NS_INLINE_MAKE_BREAK_TYPE(breakType);
ll->SetLineEndsInBR(true);
}
else {
aStatus = NS_FRAME_COMPLETE;
}
aMetrics.SetSize(wm, finalSize);
aMetrics.SetOverflowAreasToDesiredBounds();
mAscent = aMetrics.BlockStartAscent();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsFirstLetterFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aReflowStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFirstLetterFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aReflowStatus);
// Grab overflow list
DrainOverflowFrames(aPresContext);
nsIFrame* kid = mFrames.FirstChild();
// Setup reflow state for our child
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize = aReflowInput.AvailableSize();
const LogicalMargin& bp = aReflowInput.ComputedLogicalBorderPadding();
NS_ASSERTION(availSize.ISize(wm) != NS_UNCONSTRAINEDSIZE,
"should no longer use unconstrained inline size");
availSize.ISize(wm) -= bp.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= bp.BStartEnd(wm);
}
WritingMode lineWM = aMetrics.GetWritingMode();
ReflowOutput kidMetrics(lineWM);
// Reflow the child
if (!aReflowInput.mLineLayout) {
// When there is no lineLayout provided, we provide our own. The
// only time that the first-letter-frame is not reflowing in a
// line context is when its floating.
WritingMode kidWritingMode = WritingModeForLine(wm, kid);
LogicalSize kidAvailSize = availSize.ConvertTo(kidWritingMode, wm);
ReflowInput rs(aPresContext, aReflowInput, kid, kidAvailSize);
nsLineLayout ll(aPresContext, nullptr, &aReflowInput, nullptr, nullptr);
ll.BeginLineReflow(bp.IStart(wm), bp.BStart(wm),
availSize.ISize(wm), NS_UNCONSTRAINEDSIZE,
false, true, kidWritingMode,
nsSize(aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
rs.mLineLayout = ≪
ll.SetInFirstLetter(true);
ll.SetFirstLetterStyleOK(true);
kid->Reflow(aPresContext, kidMetrics, rs, aReflowStatus);
ll.EndLineReflow();
ll.SetInFirstLetter(false);
// In the floating first-letter case, we need to set this ourselves;
// nsLineLayout::BeginSpan will set it in the other case
mBaseline = kidMetrics.BlockStartAscent();
// Place and size the child and update the output metrics
LogicalSize convertedSize = kidMetrics.Size(lineWM).ConvertTo(wm, lineWM);
kid->SetRect(nsRect(bp.IStart(wm), bp.BStart(wm),
convertedSize.ISize(wm), convertedSize.BSize(wm)));
kid->FinishAndStoreOverflow(&kidMetrics);
kid->DidReflow(aPresContext, nullptr, nsDidReflowStatus::FINISHED);
convertedSize.ISize(wm) += bp.IStartEnd(wm);
convertedSize.BSize(wm) += bp.BStartEnd(wm);
aMetrics.SetSize(wm, convertedSize);
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
// Ensure that the overflow rect contains the child textframe's
// overflow rect.
// Note that if this is floating, the overline/underline drawable
// area is in the overflow rect of the child textframe.
aMetrics.UnionOverflowAreasWithDesiredBounds();
ConsiderChildOverflow(aMetrics.mOverflowAreas, kid);
FinishAndStoreOverflow(&aMetrics);
} else {
// Pretend we are a span and reflow the child frame
nsLineLayout* ll = aReflowInput.mLineLayout;
bool pushedFrame;
ll->SetInFirstLetter(
mStyleContext->GetPseudo() == nsCSSPseudoElements::firstLetter);
ll->BeginSpan(this, &aReflowInput, bp.IStart(wm),
availSize.ISize(wm), &mBaseline);
ll->ReflowFrame(kid, aReflowStatus, &kidMetrics, pushedFrame);
NS_ASSERTION(lineWM.IsVertical() == wm.IsVertical(),
"we're assuming we can mix sizes between lineWM and wm "
"since we shouldn't have orthogonal writing modes within "
"a line.");
aMetrics.ISize(lineWM) = ll->EndSpan(this) + bp.IStartEnd(wm);
ll->SetInFirstLetter(false);
if (mStyleContext->StyleTextReset()->mInitialLetterSize != 0.0f) {
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
aMetrics.BSize(lineWM) = kidMetrics.BSize(lineWM) + bp.BStartEnd(wm);
} else {
nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics, bp, lineWM, wm);
}
}
if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) {
// Create a continuation or remove existing continuations based on
// the reflow completion status.
if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
if (aReflowInput.mLineLayout) {
aReflowInput.mLineLayout->SetFirstLetterStyleOK(false);
}
nsIFrame* kidNextInFlow = kid->GetNextInFlow();
if (kidNextInFlow) {
// Remove all of the childs next-in-flows
kidNextInFlow->GetParent()->DeleteNextInFlowChild(kidNextInFlow, true);
}
} else {
// Create a continuation for the child frame if it doesn't already
// have one.
if (!IsFloating()) {
CreateNextInFlow(kid);
// And then push it to our overflow list
const nsFrameList& overflow = mFrames.RemoveFramesAfter(kid);
if (overflow.NotEmpty()) {
SetOverflowFrames(overflow);
}
} else if (!kid->GetNextInFlow()) {
// For floating first letter frames (if a continuation wasn't already
// created for us) we need to put the continuation with the rest of the
// text that the first letter frame was made out of.
nsIFrame* continuation;
CreateContinuationForFloatingParent(aPresContext, kid,
&continuation, true);
}
}
}
NS_FRAME_SET_TRUNCATION(aReflowStatus, aReflowInput, aMetrics);
}
void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");
NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
"nsNumberControlFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first");
NS_ASSERTION(!mFrames.FirstChild() ||
!mFrames.FirstChild()->GetNextSibling(),
"We expect at most one direct child frame");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
const WritingMode myWM = aReflowInput.GetWritingMode();
// The ISize of our content box, which is the available ISize
// for our anonymous content:
const nscoord contentBoxISize = aReflowInput.ComputedISize();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
// Figure out our border-box sizes as well (by adding borderPadding to
// content-box sizes):
const nscoord borderBoxISize = contentBoxISize +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
nscoord borderBoxBSize;
if (contentBoxBSize != NS_INTRINSICSIZE) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
} // else, we'll figure out borderBoxBSize after we resolve contentBoxBSize.
nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();
if (!outerWrapperFrame) { // display:none?
if (contentBoxBSize == NS_INTRINSICSIZE) {
contentBoxBSize = 0;
borderBoxBSize =
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
} else {
NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");
ReflowOutput wrappersDesiredSize(aReflowInput);
WritingMode wrapperWM = outerWrapperFrame->GetWritingMode();
LogicalSize availSize = aReflowInput.ComputedSize(wrapperWM);
availSize.BSize(wrapperWM) = NS_UNCONSTRAINEDSIZE;
ReflowInput wrapperReflowInput(aPresContext, aReflowInput,
outerWrapperFrame, availSize);
// Convert wrapper margin into my own writing-mode (in case it differs):
LogicalMargin wrapperMargin =
wrapperReflowInput.ComputedLogicalMargin().ConvertTo(myWM, wrapperWM);
// offsets of wrapper frame within this frame:
LogicalPoint
wrapperOffset(myWM,
aReflowInput.ComputedLogicalBorderPadding().IStart(myWM) +
wrapperMargin.IStart(myWM),
aReflowInput.ComputedLogicalBorderPadding().BStart(myWM) +
wrapperMargin.BStart(myWM));
nsReflowStatus childStatus;
// We initially reflow the child with a dummy containerSize; positioning
// will be fixed later.
const nsSize dummyContainerSize;
ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
wrapperReflowInput, myWM, wrapperOffset, dummyContainerSize, 0,
childStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
"We gave our child unconstrained available block-size, "
"so it should be complete");
nscoord wrappersMarginBoxBSize =
wrappersDesiredSize.BSize(myWM) + wrapperMargin.BStartEnd(myWM);
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We are intrinsically sized -- we should shrinkwrap the outer wrapper's
// block-size:
contentBoxBSize = wrappersMarginBoxBSize;
// Make sure we obey min/max-bsize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since ComputedMaxBSize and
// ComputedMinBSize are content heights.
contentBoxBSize =
NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
// Center child in block axis
nscoord extraSpace = contentBoxBSize - wrappersMarginBoxBSize;
wrapperOffset.B(myWM) += std::max(0, extraSpace / 2);
// Needed in FinishReflowChild, for logical-to-physical conversion:
nsSize borderBoxSize = LogicalSize(myWM, borderBoxISize, borderBoxBSize).
GetPhysicalSize(myWM);
// Place the child
FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
&wrapperReflowInput, myWM, wrapperOffset,
borderBoxSize, 0);
nsSize contentBoxSize =
LogicalSize(myWM, contentBoxISize, contentBoxBSize).
GetPhysicalSize(myWM);
aDesiredSize.SetBlockStartAscent(
wrappersDesiredSize.BlockStartAscent() +
outerWrapperFrame->BStart(aReflowInput.GetWritingMode(),
contentBoxSize));
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aDesiredSize.SetSize(myWM, logicalDesiredSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (outerWrapperFrame) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
}
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
ReflowOutput& aButtonDesiredSize,
const ReflowInput& aButtonReflowInput,
nsIFrame* aFirstKid)
{
WritingMode wm = GetWritingMode();
LogicalSize availSize = aButtonReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
LogicalMargin focusPadding =
LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());
// See whether out availSize's inline-size is big enough. If it's
// smaller than our intrinsic min iSize, that means that the kid
// wouldn't really fit. In that case, we overflow into our internal
// focuspadding (which other browsers don't have) so that there's a
// little more space for it.
// Note that GetMinISize includes the focusPadding.
nscoord IOverflow = GetMinISize(aButtonReflowInput.mRenderingContext) -
aButtonReflowInput.ComputedISize();
nscoord IFocusPadding = focusPadding.IStartEnd(wm);
nscoord focusPaddingReduction = std::min(IFocusPadding,
std::max(IOverflow, 0));
if (focusPaddingReduction > 0) {
nscoord startReduction = focusPadding.IStart(wm);
if (focusPaddingReduction != IFocusPadding) {
startReduction = NSToCoordRound(startReduction *
(float(focusPaddingReduction) /
float(IFocusPadding)));
}
focusPadding.IStart(wm) -= startReduction;
focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
}
// shorthand for a value we need to use in a bunch of places
const LogicalMargin& clbp = aButtonReflowInput.ComputedLogicalBorderPadding();
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= focusPadding.IStartEnd(wm);
LogicalPoint childPos(wm);
childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
ReflowInput adjustedButtonReflowInput =
CloneReflowInputWithReducedContentBox(aButtonReflowInput, focusPadding);
ReflowInput contentsReflowInput(aPresContext,
adjustedButtonReflowInput,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
ReflowOutput contentsDesiredSize(aButtonReflowInput);
childPos.B(wm) = 0; // This will be set properly later, after reflowing the
// child to determine its size.
// We just pass a dummy containerSize here, as the child will be
// repositioned later by FinishReflowChild.
nsSize dummyContainerSize;
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowInput,
wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box size:
LogicalSize buttonContentBox(wm);
if (aButtonReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
// Button has a fixed block-size -- that's its content-box bSize.
buttonContentBox.BSize(wm) = aButtonReflowInput.ComputedBSize();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' bSize, plus any focus-padding space:
buttonContentBox.BSize(wm) =
contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);
// Make sure we obey min/max-bSize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxBSize and
// mComputedMinBSize are content bSizes.
buttonContentBox.BSize(wm) =
NS_CSS_MINMAX(buttonContentBox.BSize(wm),
aButtonReflowInput.ComputedMinBSize(),
aButtonReflowInput.ComputedMaxBSize());
}
if (aButtonReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
buttonContentBox.ISize(wm) = aButtonReflowInput.ComputedISize();
} else {
buttonContentBox.ISize(wm) =
contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
buttonContentBox.ISize(wm) =
NS_CSS_MINMAX(buttonContentBox.ISize(wm),
aButtonReflowInput.ComputedMinISize(),
aButtonReflowInput.ComputedMaxISize());
}
// Center child in the block-direction in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
contentsDesiredSize.BSize(wm);
childPos.B(wm) = std::max(0, extraSpace / 2);
// Adjust childPos.B() to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);
nsSize containerSize =
(buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowInput,
wm, childPos, containerSize, 0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
ReflowOutput::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowInput.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.SetSize(wm,
LogicalSize(wm, aButtonReflowInput.ComputedISize() + clbp.IStartEnd(wm),
buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));
// * Button's ascent is its child's ascent, plus the child's block-offset
// within our frame... unless it's orthogonal, in which case we'll use the
// contents inline-size as an approximation for now.
// XXX is there a better strategy? should we include border-padding?
if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
} else {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
childPos.B(wm));
}
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}
void
nsTableWrapperFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aOuterRI,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTableWrapperFrame");
DISPLAY_REFLOW(aPresContext, this, aOuterRI, aDesiredSize, aStatus);
// Initialize out parameters
aDesiredSize.ClearSize();
aStatus = NS_FRAME_COMPLETE;
if (!HasAnyStateBits(NS_FRAME_FIRST_REFLOW)) {
// Set up our kids. They're already present, on an overflow list,
// or there are none so we'll create them now
MoveOverflowToChildList();
}
Maybe<ReflowInput> captionRI;
Maybe<ReflowInput> innerRI;
nsRect origInnerRect = InnerTableFrame()->GetRect();
nsRect origInnerVisualOverflow = InnerTableFrame()->GetVisualOverflowRect();
bool innerFirstReflow =
InnerTableFrame()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
nsRect origCaptionRect;
nsRect origCaptionVisualOverflow;
bool captionFirstReflow = false;
if (mCaptionFrames.NotEmpty()) {
origCaptionRect = mCaptionFrames.FirstChild()->GetRect();
origCaptionVisualOverflow =
mCaptionFrames.FirstChild()->GetVisualOverflowRect();
captionFirstReflow =
mCaptionFrames.FirstChild()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
}
// ComputeAutoSize has to match this logic.
WritingMode wm = aOuterRI.GetWritingMode();
uint8_t captionSide = GetCaptionSide();
WritingMode captionWM = wm; // will be changed below if necessary
if (captionSide == NO_SIDE) {
// We don't have a caption.
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
} else if (captionSide == NS_STYLE_CAPTION_SIDE_LEFT ||
captionSide == NS_STYLE_CAPTION_SIDE_RIGHT) {
// ComputeAutoSize takes care of making side captions small. Compute
// the caption's size first, and tell the table to fit in what's left.
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(), aOuterRI,
captionRI, aOuterRI.ComputedSize(wm).ISize(wm));
captionWM = captionRI->GetWritingMode();
nscoord innerAvailISize = aOuterRI.ComputedSize(wm).ISize(wm) -
captionRI->ComputedSizeWithMarginBorderPadding(wm).ISize(wm);
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, innerAvailISize);
} else if (captionSide == NS_STYLE_CAPTION_SIDE_TOP ||
captionSide == NS_STYLE_CAPTION_SIDE_BOTTOM) {
// Compute the table's size first, and then prevent the caption from
// being larger in the inline dir unless it has to be.
//
// Note that CSS 2.1 (but not 2.0) says:
// The width of the anonymous box is the border-edge width of the
// table box inside it
// We don't actually make our anonymous box that isize (if we did,
// it would break 'auto' margins), but this effectively does that.
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
// It's good that CSS 2.1 says not to include margins, since we
// can't, since they already been converted so they exactly
// fill the available isize (ignoring the margin on one side if
// neither are auto). (We take advantage of that later when we call
// GetCaptionOrigin, though.)
nscoord innerBorderISize =
innerRI->ComputedSizeWithBorderPadding(wm).ISize(wm);
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(), aOuterRI,
captionRI, innerBorderISize);
captionWM = captionRI->GetWritingMode();
} else {
NS_ASSERTION(captionSide == NS_STYLE_CAPTION_SIDE_TOP_OUTSIDE ||
captionSide == NS_STYLE_CAPTION_SIDE_BOTTOM_OUTSIDE,
"unexpected caption-side");
// Size the table and the caption independently.
captionWM = mCaptionFrames.FirstChild()->GetWritingMode();
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(),
aOuterRI, captionRI,
aOuterRI.ComputedSize(captionWM).ISize(captionWM));
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
}
// First reflow the caption.
Maybe<ReflowOutput> captionMet;
LogicalSize captionSize(wm);
LogicalMargin captionMargin(wm);
if (mCaptionFrames.NotEmpty()) {
captionMet.emplace(wm);
nsReflowStatus capStatus; // don't let the caption cause incomplete
OuterDoReflowChild(aPresContext, mCaptionFrames.FirstChild(),
*captionRI, *captionMet, capStatus);
captionSize.ISize(wm) = captionMet->ISize(wm);
captionSize.BSize(wm) = captionMet->BSize(wm);
captionMargin =
captionRI->ComputedLogicalMargin().ConvertTo(wm, captionWM);
// Now that we know the bsize of the caption, reduce the available bsize
// for the table frame if we are bsize constrained and the caption is above
// or below the inner table. Also reduce the CB size that we store for
// our children in case we're a grid item, by the same amount.
LogicalSize* cbSize = Properties().Get(GridItemCBSizeProperty());
if (NS_UNCONSTRAINEDSIZE != aOuterRI.AvailableBSize() || cbSize) {
nscoord captionBSize = 0;
nscoord captionISize = 0;
switch (captionSide) {
case NS_STYLE_CAPTION_SIDE_TOP:
case NS_STYLE_CAPTION_SIDE_BOTTOM:
case NS_STYLE_CAPTION_SIDE_TOP_OUTSIDE:
case NS_STYLE_CAPTION_SIDE_BOTTOM_OUTSIDE:
captionBSize = captionSize.BSize(wm) + captionMargin.BStartEnd(wm);
break;
case NS_STYLE_CAPTION_SIDE_LEFT:
case NS_STYLE_CAPTION_SIDE_RIGHT:
captionISize = captionSize.ISize(wm) + captionMargin.IStartEnd(wm);
break;
}
if (NS_UNCONSTRAINEDSIZE != aOuterRI.AvailableBSize()) {
innerRI->AvailableBSize() =
std::max(0, innerRI->AvailableBSize() - captionBSize);
}
if (cbSize) {
// Shrink the CB size by the size reserved for the caption.
LogicalSize oldCBSize = *cbSize;
cbSize->ISize(wm) = std::max(0, cbSize->ISize(wm) - captionISize);
cbSize->BSize(wm) = std::max(0, cbSize->BSize(wm) - captionBSize);
if (oldCBSize != *cbSize) {
// Reset the inner table's ReflowInput to stretch it to the new size.
innerRI.reset();
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
}
}
}
}
// Then, now that we know how much to reduce the isize of the inner
// table to account for side captions, reflow the inner table.
ReflowOutput innerMet(innerRI->GetWritingMode());
OuterDoReflowChild(aPresContext, InnerTableFrame(), *innerRI,
innerMet, aStatus);
LogicalSize innerSize(wm, innerMet.ISize(wm), innerMet.BSize(wm));
LogicalMargin innerMargin = innerRI->ComputedLogicalMargin();
LogicalSize containSize(wm, GetContainingBlockSize(aOuterRI));
// Now that we've reflowed both we can place them.
// XXXldb Most of the input variables here are now uninitialized!
// XXX Need to recompute inner table's auto margins for the case of side
// captions. (Caption's are broken too, but that should be fixed earlier.)
// Compute the desiredSize so that we can use it as the containerSize
// for the FinishReflowChild calls below.
LogicalSize desiredSize(wm);
SetDesiredSize(captionSide, innerSize, captionSize,
innerMargin, captionMargin,
desiredSize.ISize(wm), desiredSize.BSize(wm), wm);
aDesiredSize.SetSize(wm, desiredSize);
nsSize containerSize = aDesiredSize.PhysicalSize();
// XXX It's possible for this to be NS_UNCONSTRAINEDSIZE, which will result
// in assertions from FinishReflowChild.
if (mCaptionFrames.NotEmpty()) {
LogicalPoint captionOrigin(wm);
GetCaptionOrigin(captionSide, containSize, innerSize, innerMargin,
captionSize, captionMargin, captionOrigin, wm);
FinishReflowChild(mCaptionFrames.FirstChild(), aPresContext, *captionMet,
captionRI.ptr(), wm, captionOrigin, containerSize, 0);
captionRI.reset();
}
// XXX If the bsize is constrained then we need to check whether
// everything still fits...
LogicalPoint innerOrigin(wm);
GetInnerOrigin(captionSide, containSize, captionSize, captionMargin,
innerSize, innerMargin, innerOrigin, wm);
FinishReflowChild(InnerTableFrame(), aPresContext, innerMet, innerRI.ptr(),
wm, innerOrigin, containerSize, 0);
innerRI.reset();
nsTableFrame::InvalidateTableFrame(InnerTableFrame(), origInnerRect,
origInnerVisualOverflow,
innerFirstReflow);
if (mCaptionFrames.NotEmpty()) {
nsTableFrame::InvalidateTableFrame(mCaptionFrames.FirstChild(),
origCaptionRect,
origCaptionVisualOverflow,
captionFirstReflow);
}
UpdateOverflowAreas(aDesiredSize);
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aOuterRI,
aDesiredSize.mOverflowAreas, 0,
aStatus);
}
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aOuterRI, aStatus);
// Return our desired rect
NS_FRAME_SET_TRUNCATION(aStatus, aOuterRI, aDesiredSize);
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
const WritingMode myWM = aReflowInput.GetWritingMode();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
const nscoord borderBoxISize = aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
const bool isBSizeShrinkWrapping = (contentBoxBSize == NS_INTRINSICSIZE);
nscoord borderBoxBSize;
if (!isBSizeShrinkWrapping) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
nsMargin borderPadding = aReflowInput.ComputedPhysicalBorderPadding();
// Reflow the child frames. We may have up to three: an image
// frame (for the poster image), a container frame for the controls,
// and a container frame for the caption.
for (nsIFrame* child : mFrames) {
nsSize oldChildSize = child->GetSize();
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(borderPadding.left, borderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
// Android still uses XUL media controls & hence needs this XUL-friendly
// custom reflow code. This will go away in bug 1310907.
#ifdef ANDROID
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(borderPadding.left,
borderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
#endif // ANDROID
} else if (child->GetContent() == mCaptionDiv ||
child->GetContent() == mVideoControls) {
// Reflow the caption and control bar frames.
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.ComputedSize(wm);
availableSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize);
ReflowOutput kidDesiredSize(kidReflowInput);
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
borderPadding.left, borderPadding.top, 0, aStatus);
if (child->GetContent() == mVideoControls && isBSizeShrinkWrapping) {
// Resolve our own BSize based on the controls' size in the same axis.
contentBoxBSize = myWM.IsOrthogonalTo(wm) ?
kidDesiredSize.ISize(wm) : kidDesiredSize.BSize(wm);
}
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
borderPadding.left, borderPadding.top, 0);
}
if (child->GetContent() == mVideoControls && child->GetSize() != oldChildSize) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
}
if (isBSizeShrinkWrapping) {
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We didn't get a BSize from our intrinsic size/ratio, nor did we
// get one from our controls. Just use BSize of 0.
contentBoxBSize = 0;
}
contentBoxBSize = NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aMetrics.SetSize(myWM, logicalDesiredSize);
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
BlockReflowInput::BlockReflowInput(const ReflowInput& aReflowInput,
nsPresContext* aPresContext,
nsBlockFrame* aFrame,
bool aBStartMarginRoot,
bool aBEndMarginRoot,
bool aBlockNeedsFloatManager,
nscoord aConsumedBSize)
: mBlock(aFrame),
mPresContext(aPresContext),
mReflowInput(aReflowInput),
mContentArea(aReflowInput.GetWritingMode()),
mPushedFloats(nullptr),
mOverflowTracker(nullptr),
mBorderPadding(mReflowInput.ComputedLogicalBorderPadding()),
mPrevBEndMargin(),
mLineNumber(0),
mFloatBreakType(StyleClear::None),
mConsumedBSize(aConsumedBSize)
{
if (!sFloatFragmentsInsideColumnPrefCached) {
sFloatFragmentsInsideColumnPrefCached = true;
Preferences::AddBoolVarCache(&sFloatFragmentsInsideColumnEnabled,
"layout.float-fragments-inside-column.enabled");
}
mFlags.mFloatFragmentsInsideColumnEnabled = sFloatFragmentsInsideColumnEnabled;
WritingMode wm = aReflowInput.GetWritingMode();
mFlags.mIsFirstInflow = !aFrame->GetPrevInFlow();
mFlags.mIsOverflowContainer = IS_TRUE_OVERFLOW_CONTAINER(aFrame);
nsIFrame::LogicalSides logicalSkipSides =
aFrame->GetLogicalSkipSides(&aReflowInput);
mBorderPadding.ApplySkipSides(logicalSkipSides);
// Note that mContainerSize is the physical size, needed to
// convert logical block-coordinates in vertical-rl writing mode
// (measured from a RHS origin) to physical coordinates within the
// containing block.
// If aReflowInput doesn't have a constrained ComputedWidth(), we set
// mContainerSize.width to zero, which means lines will be positioned
// (physically) incorrectly; we will fix them up at the end of
// nsBlockFrame::Reflow, after we know the total block-size of the
// frame.
mContainerSize.width = aReflowInput.ComputedWidth();
if (mContainerSize.width == NS_UNCONSTRAINEDSIZE) {
mContainerSize.width = 0;
}
mContainerSize.width += mBorderPadding.LeftRight(wm);
// For now at least, we don't do that fix-up for mContainerHeight.
// It's only used in nsBidiUtils::ReorderFrames for vertical rtl
// writing modes, which aren't fully supported for the time being.
mContainerSize.height = aReflowInput.ComputedHeight() +
mBorderPadding.TopBottom(wm);
if ((aBStartMarginRoot && !logicalSkipSides.BStart()) ||
0 != mBorderPadding.BStart(wm)) {
mFlags.mIsBStartMarginRoot = true;
mFlags.mShouldApplyBStartMargin = true;
}
if ((aBEndMarginRoot && !logicalSkipSides.BEnd()) ||
0 != mBorderPadding.BEnd(wm)) {
mFlags.mIsBEndMarginRoot = true;
}
if (aBlockNeedsFloatManager) {
mFlags.mBlockNeedsFloatManager = true;
}
mFloatManager = aReflowInput.mFloatManager;
NS_ASSERTION(mFloatManager,
"FloatManager should be set in BlockReflowInput" );
if (mFloatManager) {
// Save the coordinate system origin for later.
mFloatManager->GetTranslation(mFloatManagerI, mFloatManagerB);
mFloatManager->PushState(&mFloatManagerStateBefore); // never popped
}
mReflowStatus = NS_FRAME_COMPLETE;
mNextInFlow = static_cast<nsBlockFrame*>(mBlock->GetNextInFlow());
LAYOUT_WARN_IF_FALSE(NS_UNCONSTRAINEDSIZE != aReflowInput.ComputedISize(),
"have unconstrained width; this should only result "
"from very large sizes, not attempts at intrinsic "
"width calculation");
mContentArea.ISize(wm) = aReflowInput.ComputedISize();
// Compute content area height. Unlike the width, if we have a
// specified style height we ignore it since extra content is
// managed by the "overflow" property. When we don't have a
// specified style height then we may end up limiting our height if
// the availableHeight is constrained (this situation occurs when we
// are paginated).
if (NS_UNCONSTRAINEDSIZE != aReflowInput.AvailableBSize()) {
// We are in a paginated situation. The bottom edge is just inside
// the bottom border and padding. The content area height doesn't
// include either border or padding edge.
mBEndEdge = aReflowInput.AvailableBSize() - mBorderPadding.BEnd(wm);
mContentArea.BSize(wm) = std::max(0, mBEndEdge - mBorderPadding.BStart(wm));
}
else {
// When we are not in a paginated situation then we always use
// a constrained height.
mFlags.mHasUnconstrainedBSize = true;
mContentArea.BSize(wm) = mBEndEdge = NS_UNCONSTRAINEDSIZE;
}
mContentArea.IStart(wm) = mBorderPadding.IStart(wm);
mBCoord = mContentArea.BStart(wm) = mBorderPadding.BStart(wm);
mPrevChild = nullptr;
mCurrentLine = aFrame->LinesEnd();
mMinLineHeight = aReflowInput.CalcLineHeight();
}
void
ViewportFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("ViewportFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_FRAME_TRACE_REFLOW_IN("ViewportFrame::Reflow");
// Initialize OUT parameters
aStatus = NS_FRAME_COMPLETE;
// Because |Reflow| sets ComputedBSize() on the child to our
// ComputedBSize().
AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
// Set our size up front, since some parts of reflow depend on it
// being already set. Note that the computed height may be
// unconstrained; that's ok. Consumers should watch out for that.
SetSize(nsSize(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight()));
// Reflow the main content first so that the placeholders of the
// fixed-position frames will be in the right places on an initial
// reflow.
nscoord kidBSize = 0;
WritingMode wm = aReflowInput.GetWritingMode();
if (mFrames.NotEmpty()) {
// Deal with a non-incremental reflow or an incremental reflow
// targeted at our one-and-only principal child frame.
if (aReflowInput.ShouldReflowAllKids() ||
aReflowInput.IsBResize() ||
NS_SUBTREE_DIRTY(mFrames.FirstChild())) {
// Reflow our one-and-only principal child frame
nsIFrame* kidFrame = mFrames.FirstChild();
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = kidFrame->GetWritingMode();
LogicalSize availableSpace = aReflowInput.AvailableSize(wm);
ReflowInput kidReflowInput(aPresContext, aReflowInput,
kidFrame, availableSpace);
// Reflow the frame
kidReflowInput.SetComputedBSize(aReflowInput.ComputedBSize());
ReflowChild(kidFrame, aPresContext, kidDesiredSize, kidReflowInput,
0, 0, 0, aStatus);
kidBSize = kidDesiredSize.BSize(wm);
FinishReflowChild(kidFrame, aPresContext, kidDesiredSize, nullptr, 0, 0, 0);
} else {
kidBSize = LogicalSize(wm, mFrames.FirstChild()->GetSize()).BSize(wm);
}
}
NS_ASSERTION(aReflowInput.AvailableISize() != NS_UNCONSTRAINEDSIZE,
"shouldn't happen anymore");
// Return the max size as our desired size
LogicalSize maxSize(wm, aReflowInput.AvailableISize(),
// Being flowed initially at an unconstrained block size
// means we should return our child's intrinsic size.
aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE
? aReflowInput.ComputedBSize()
: kidBSize);
aDesiredSize.SetSize(wm, maxSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (HasAbsolutelyPositionedChildren()) {
// Make a copy of the reflow state and change the computed width and height
// to reflect the available space for the fixed items
ReflowInput reflowInput(aReflowInput);
if (reflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
// We have an intrinsic-height document with abs-pos/fixed-pos children.
// Set the available height and mComputedHeight to our chosen height.
reflowInput.AvailableBSize() = maxSize.BSize(wm);
// Not having border/padding simplifies things
NS_ASSERTION(reflowInput.ComputedPhysicalBorderPadding() == nsMargin(0,0,0,0),
"Viewports can't have border/padding");
reflowInput.SetComputedBSize(maxSize.BSize(wm));
}
nsRect rect = AdjustReflowInputAsContainingBlock(&reflowInput);
nsOverflowAreas* overflowAreas = &aDesiredSize.mOverflowAreas;
nsIScrollableFrame* rootScrollFrame =
aPresContext->PresShell()->GetRootScrollFrameAsScrollable();
if (rootScrollFrame && !rootScrollFrame->IsIgnoringViewportClipping()) {
overflowAreas = nullptr;
}
AbsPosReflowFlags flags =
AbsPosReflowFlags::eCBWidthAndHeightChanged; // XXX could be optimized
GetAbsoluteContainingBlock()->Reflow(this, aPresContext, reflowInput, aStatus,
rect, flags, overflowAreas);
}
if (mFrames.NotEmpty()) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, mFrames.FirstChild());
}
// If we were dirty then do a repaint
if (GetStateBits() & NS_FRAME_IS_DIRTY) {
InvalidateFrame();
}
// Clipping is handled by the document container (e.g., nsSubDocumentFrame),
// so we don't need to change our overflow areas.
bool overflowChanged = FinishAndStoreOverflow(&aDesiredSize);
if (overflowChanged) {
// We may need to alert our container to get it to pick up the
// overflow change.
nsSubDocumentFrame* container = static_cast<nsSubDocumentFrame*>
(nsLayoutUtils::GetCrossDocParentFrame(this));
if (container && !container->ShouldClipSubdocument()) {
container->PresContext()->PresShell()->
FrameNeedsReflow(container, nsIPresShell::eResize, NS_FRAME_IS_DIRTY);
}
}
NS_FRAME_TRACE_REFLOW_OUT("ViewportFrame::Reflow", aStatus);
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
/* virtual */ void
nsRubyFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsRubyFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!");
if (!aReflowInput.mLineLayout) {
NS_ASSERTION(aReflowInput.mLineLayout,
"No line layout provided to RubyFrame reflow method.");
return;
}
// Grab overflow frames from prev-in-flow and its own.
MoveInlineOverflowToChildList(
aReflowInput.mLineLayout->LineContainerFrame());
// Clear leadings
mLeadings.Reset();
// Since the ruby base container is going to reflow not only the ruby
// base frames, but also the ruby text frames, and then *afterwards*
// we're going to reflow the ruby text containers (which do not reflow
// their children), we need to transfer NS_FRAME_IS_DIRTY status from
// the ruby text containers to their child ruby texts now, both so
// that the ruby texts are marked dirty if needed, and so that the
// ruby text container doesn't mark the ruby text frames dirty *after*
// they're reflowed and leave dirty bits in a clean tree (suppressing
// future reflows, due to lack of a queued reflow to clean them).
for (nsIFrame* child : PrincipalChildList()) {
if (child->HasAnyStateBits(NS_FRAME_IS_DIRTY) &&
child->IsRubyTextContainerFrame()) {
for (nsIFrame* grandchild : child->PrincipalChildList()) {
grandchild->AddStateBits(NS_FRAME_IS_DIRTY);
}
// Replace NS_FRAME_IS_DIRTY with NS_FRAME_HAS_DIRTY_CHILDREN so
// we still have a dirty marking, but one that we won't transfer
// to children again.
child->RemoveStateBits(NS_FRAME_IS_DIRTY);
child->AddStateBits(NS_FRAME_HAS_DIRTY_CHILDREN);
}
}
// Begin the span for the ruby frame
WritingMode frameWM = aReflowInput.GetWritingMode();
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord startEdge = 0;
const bool boxDecorationBreakClone =
StyleBorder()->mBoxDecorationBreak == StyleBoxDecorationBreak::Clone;
if (boxDecorationBreakClone || !GetPrevContinuation()) {
startEdge = borderPadding.IStart(frameWM);
}
NS_ASSERTION(aReflowInput.AvailableISize() != NS_UNCONSTRAINEDSIZE,
"should no longer use available widths");
nscoord availableISize = aReflowInput.AvailableISize();
availableISize -= startEdge + borderPadding.IEnd(frameWM);
aReflowInput.mLineLayout->BeginSpan(this, &aReflowInput,
startEdge, availableISize, &mBaseline);
for (RubySegmentEnumerator e(this); !e.AtEnd(); e.Next()) {
ReflowSegment(aPresContext, aReflowInput, e.GetBaseContainer(), aStatus);
if (aStatus.IsInlineBreak()) {
// A break occurs when reflowing the segment.
// Don't continue reflowing more segments.
break;
}
}
ContinuationTraversingState pullState(this);
while (aStatus.IsEmpty()) {
nsRubyBaseContainerFrame* baseContainer =
PullOneSegment(aReflowInput.mLineLayout, pullState);
if (!baseContainer) {
// No more continuations after, finish now.
break;
}
ReflowSegment(aPresContext, aReflowInput, baseContainer, aStatus);
}
// We never handle overflow in ruby.
MOZ_ASSERT(!aStatus.IsOverflowIncomplete());
aDesiredSize.ISize(lineWM) = aReflowInput.mLineLayout->EndSpan(this);
if (boxDecorationBreakClone || !GetPrevContinuation()) {
aDesiredSize.ISize(lineWM) += borderPadding.IStart(frameWM);
}
if (boxDecorationBreakClone || aStatus.IsComplete()) {
aDesiredSize.ISize(lineWM) += borderPadding.IEnd(frameWM);
}
// Update descendant leadings of ancestor ruby base container.
if (nsRubyBaseContainerFrame* rbc = FindRubyBaseContainerAncestor(this)) {
rbc->UpdateDescendantLeadings(mLeadings);
}
nsLayoutUtils::SetBSizeFromFontMetrics(this, aDesiredSize,
borderPadding, lineWM, frameWM);
}
void
nsInlineFrame::ReflowFrames(nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
InlineReflowInput& irs,
ReflowOutput& aMetrics,
nsReflowStatus& aStatus)
{
MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!");
nsLineLayout* lineLayout = aReflowInput.mLineLayout;
bool inFirstLine = aReflowInput.mLineLayout->GetInFirstLine();
RestyleManager* restyleManager = aPresContext->RestyleManager();
WritingMode frameWM = aReflowInput.GetWritingMode();
WritingMode lineWM = aReflowInput.mLineLayout->mRootSpan->mWritingMode;
LogicalMargin framePadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord startEdge = 0;
const bool boxDecorationBreakClone =
MOZ_UNLIKELY(StyleBorder()->mBoxDecorationBreak ==
StyleBoxDecorationBreak::Clone);
// Don't offset by our start borderpadding if we have a prev continuation or
// if we're in a part of an {ib} split other than the first one. For
// box-decoration-break:clone we always offset our start since all
// continuations have border/padding.
if ((!GetPrevContinuation() && !FrameIsNonFirstInIBSplit()) ||
boxDecorationBreakClone) {
startEdge = framePadding.IStart(frameWM);
}
nscoord availableISize = aReflowInput.AvailableISize();
NS_ASSERTION(availableISize != NS_UNCONSTRAINEDSIZE,
"should no longer use available widths");
// Subtract off inline axis border+padding from availableISize
availableISize -= startEdge;
availableISize -= framePadding.IEnd(frameWM);
lineLayout->BeginSpan(this, &aReflowInput, startEdge,
startEdge + availableISize, &mBaseline);
// First reflow our principal children.
nsIFrame* frame = mFrames.FirstChild();
bool done = false;
while (frame) {
// Check if we should lazily set the child frame's parent pointer.
if (irs.mSetParentPointer) {
nsIFrame* child = frame;
do {
child->SetParent(this);
if (inFirstLine) {
restyleManager->ReparentStyleContext(child);
nsLayoutUtils::MarkDescendantsDirty(child);
}
// We also need to do the same for |frame|'s next-in-flows that are in
// the sibling list. Otherwise, if we reflow |frame| and it's complete
// we'll crash when trying to delete its next-in-flow.
// This scenario doesn't happen often, but it can happen.
nsIFrame* nextSibling = child->GetNextSibling();
child = child->GetNextInFlow();
if (MOZ_UNLIKELY(child)) {
while (child != nextSibling && nextSibling) {
nextSibling = nextSibling->GetNextSibling();
}
if (!nextSibling) {
child = nullptr;
}
}
MOZ_ASSERT(!child || mFrames.ContainsFrame(child));
} while (child);
// Fix the parent pointer for ::first-letter child frame next-in-flows,
// so nsFirstLetterFrame::Reflow can destroy them safely (bug 401042).
nsIFrame* realFrame = nsPlaceholderFrame::GetRealFrameFor(frame);
if (realFrame->IsLetterFrame()) {
nsIFrame* child = realFrame->PrincipalChildList().FirstChild();
if (child) {
NS_ASSERTION(child->IsTextFrame(), "unexpected frame type");
nsIFrame* nextInFlow = child->GetNextInFlow();
for ( ; nextInFlow; nextInFlow = nextInFlow->GetNextInFlow()) {
NS_ASSERTION(nextInFlow->IsTextFrame(), "unexpected frame type");
if (mFrames.ContainsFrame(nextInFlow)) {
nextInFlow->SetParent(this);
if (inFirstLine) {
restyleManager->ReparentStyleContext(nextInFlow);
nsLayoutUtils::MarkDescendantsDirty(nextInFlow);
}
}
else {
#ifdef DEBUG
// Once we find a next-in-flow that isn't ours none of the
// remaining next-in-flows should be either.
for ( ; nextInFlow; nextInFlow = nextInFlow->GetNextInFlow()) {
NS_ASSERTION(!mFrames.ContainsFrame(nextInFlow),
"unexpected letter frame flow");
}
#endif
break;
}
}
}
}
}
MOZ_ASSERT(frame->GetParent() == this);
if (!done) {
bool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
ReflowInlineFrame(aPresContext, aReflowInput, irs, frame, aStatus);
done = aStatus.IsInlineBreak() ||
(!reflowingFirstLetter && aStatus.IsIncomplete());
if (done) {
if (!irs.mSetParentPointer) {
break;
}
// Keep reparenting the remaining siblings, but don't reflow them.
nsFrameList* pushedFrames = GetOverflowFrames();
if (pushedFrames && pushedFrames->FirstChild() == frame) {
// Don't bother if |frame| was pushed to our overflow list.
break;
}
} else {
irs.mPrevFrame = frame;
}
}
frame = frame->GetNextSibling();
}
// Attempt to pull frames from our next-in-flow until we can't
if (!done && GetNextInFlow()) {
while (true) {
bool reflowingFirstLetter = lineLayout->GetFirstLetterStyleOK();
bool isComplete;
if (!frame) { // Could be non-null if we pulled a first-letter frame and
// it created a continuation, since we don't push those.
frame = PullOneFrame(aPresContext, irs, &isComplete);
}
#ifdef NOISY_PUSHING
printf("%p pulled up %p\n", this, frame);
#endif
if (nullptr == frame) {
if (!isComplete) {
aStatus.Reset();
aStatus.SetIncomplete();
}
break;
}
ReflowInlineFrame(aPresContext, aReflowInput, irs, frame, aStatus);
if (aStatus.IsInlineBreak() ||
(!reflowingFirstLetter && aStatus.IsIncomplete())) {
break;
}
irs.mPrevFrame = frame;
frame = frame->GetNextSibling();
}
}
NS_ASSERTION(!aStatus.IsComplete() || !GetOverflowFrames(),
"We can't be complete AND have overflow frames!");
// If after reflowing our children they take up no area then make
// sure that we don't either.
//
// Note: CSS demands that empty inline elements still affect the
// line-height calculations. However, continuations of an inline
// that are empty we force to empty so that things like collapsed
// whitespace in an inline element don't affect the line-height.
aMetrics.ISize(lineWM) = lineLayout->EndSpan(this);
// Compute final width.
// XXX Note that that the padding start and end are in the frame's
// writing mode, but the metrics' inline-size is in the line's
// writing mode. This makes sense if the line and frame are both
// vertical or both horizontal, but what should happen with
// orthogonal inlines?
// Make sure to not include our start border and padding if we have a prev
// continuation or if we're in a part of an {ib} split other than the first
// one. For box-decoration-break:clone we always include our start border
// and padding since all continuations have them.
if ((!GetPrevContinuation() && !FrameIsNonFirstInIBSplit()) ||
boxDecorationBreakClone) {
aMetrics.ISize(lineWM) += framePadding.IStart(frameWM);
}
/*
* We want to only apply the end border and padding if we're the last
* continuation and either not in an {ib} split or the last part of it. To
* be the last continuation we have to be complete (so that we won't get a
* next-in-flow) and have no non-fluid continuations on our continuation
* chain. For box-decoration-break:clone we always apply the end border and
* padding since all continuations have them.
*/
if ((aStatus.IsComplete() &&
!LastInFlow()->GetNextContinuation() &&
!FrameIsNonLastInIBSplit()) ||
boxDecorationBreakClone) {
aMetrics.ISize(lineWM) += framePadding.IEnd(frameWM);
}
nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics,
framePadding, lineWM, frameWM);
// For now our overflow area is zero. The real value will be
// computed in |nsLineLayout::RelativePositionFrames|.
aMetrics.mOverflowAreas.Clear();
#ifdef NOISY_FINAL_SIZE
ListTag(stdout);
printf(": metrics=%d,%d ascent=%d\n",
aMetrics.Width(), aMetrics.Height(), aMetrics.TopAscent());
#endif
}
void
nsAbsoluteContainingBlock::ResolveSizeDependentOffsets(
nsPresContext* aPresContext,
ReflowInput& aKidReflowInput,
const LogicalSize& aKidSize,
const LogicalMargin& aMargin,
LogicalMargin* aOffsets,
LogicalSize* aLogicalCBSize)
{
WritingMode wm = aKidReflowInput.GetWritingMode();
WritingMode outerWM = aKidReflowInput.mParentReflowInput->GetWritingMode();
// Now that we know the child's size, we resolve any sentinel values in its
// IStart/BStart offset coordinates that depend on that size.
// * NS_AUTOOFFSET indicates that the child's position in the given axis
// is determined by its end-wards offset property, combined with its size and
// available space. e.g.: "top: auto; height: auto; bottom: 50px"
// * m{I,B}OffsetsResolvedAfterSize indicate that the child is using its
// static position in that axis, *and* its static position is determined by
// the axis-appropriate css-align property (which may require the child's
// size, e.g. to center it within the parent).
if ((NS_AUTOOFFSET == aOffsets->IStart(outerWM)) ||
(NS_AUTOOFFSET == aOffsets->BStart(outerWM)) ||
aKidReflowInput.mFlags.mIOffsetsNeedCSSAlign ||
aKidReflowInput.mFlags.mBOffsetsNeedCSSAlign) {
if (-1 == aLogicalCBSize->ISize(wm)) {
// Get the containing block width/height
const ReflowInput* parentRI = aKidReflowInput.mParentReflowInput;
*aLogicalCBSize =
aKidReflowInput.ComputeContainingBlockRectangle(aPresContext,
parentRI);
}
const LogicalSize logicalCBSizeOuterWM = aLogicalCBSize->ConvertTo(outerWM,
wm);
// placeholderContainer is used in each of the m{I,B}OffsetsNeedCSSAlign
// clauses. We declare it at this scope so we can avoid having to look
// it up twice (and only look it up if it's needed).
nsContainerFrame* placeholderContainer = nullptr;
if (NS_AUTOOFFSET == aOffsets->IStart(outerWM)) {
NS_ASSERTION(NS_AUTOOFFSET != aOffsets->IEnd(outerWM),
"Can't solve for both start and end");
aOffsets->IStart(outerWM) =
logicalCBSizeOuterWM.ISize(outerWM) -
aOffsets->IEnd(outerWM) - aMargin.IStartEnd(outerWM) -
aKidSize.ISize(outerWM);
} else if (aKidReflowInput.mFlags.mIOffsetsNeedCSSAlign) {
placeholderContainer = GetPlaceholderContainer(aPresContext,
aKidReflowInput.mFrame);
nscoord offset = OffsetToAlignedStaticPos(aKidReflowInput, aKidSize,
placeholderContainer,
outerWM, eLogicalAxisInline);
// Shift IStart from its current position (at start corner of the
// alignment container) by the returned offset. And set IEnd to the
// distance between the kid's end edge to containing block's end edge.
aOffsets->IStart(outerWM) += offset;
aOffsets->IEnd(outerWM) =
logicalCBSizeOuterWM.ISize(outerWM) -
(aOffsets->IStart(outerWM) + aKidSize.ISize(outerWM));
}
if (NS_AUTOOFFSET == aOffsets->BStart(outerWM)) {
aOffsets->BStart(outerWM) =
logicalCBSizeOuterWM.BSize(outerWM) -
aOffsets->BEnd(outerWM) - aMargin.BStartEnd(outerWM) -
aKidSize.BSize(outerWM);
} else if (aKidReflowInput.mFlags.mBOffsetsNeedCSSAlign) {
if (!placeholderContainer) {
placeholderContainer = GetPlaceholderContainer(aPresContext,
aKidReflowInput.mFrame);
}
nscoord offset = OffsetToAlignedStaticPos(aKidReflowInput, aKidSize,
placeholderContainer,
outerWM, eLogicalAxisBlock);
// Shift BStart from its current position (at start corner of the
// alignment container) by the returned offset. And set BEnd to the
// distance between the kid's end edge to containing block's end edge.
aOffsets->BStart(outerWM) += offset;
aOffsets->BEnd(outerWM) =
logicalCBSizeOuterWM.BSize(outerWM) -
(aOffsets->BStart(outerWM) + aKidSize.BSize(outerWM));
}
aKidReflowInput.SetComputedLogicalOffsets(aOffsets->ConvertTo(wm, outerWM));
}
}
/* virtual */ void
nsRubyFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsRubyFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
if (!aReflowInput.mLineLayout) {
NS_ASSERTION(aReflowInput.mLineLayout,
"No line layout provided to RubyFrame reflow method.");
aStatus = NS_FRAME_COMPLETE;
return;
}
// Grab overflow frames from prev-in-flow and its own.
MoveOverflowToChildList();
// Clear leadings
mBStartLeading = mBEndLeading = 0;
// Begin the span for the ruby frame
WritingMode frameWM = aReflowInput.GetWritingMode();
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
nscoord startEdge = 0;
const bool boxDecorationBreakClone =
StyleBorder()->mBoxDecorationBreak == StyleBoxDecorationBreak::Clone;
if (boxDecorationBreakClone || !GetPrevContinuation()) {
startEdge = borderPadding.IStart(frameWM);
}
NS_ASSERTION(aReflowInput.AvailableISize() != NS_UNCONSTRAINEDSIZE,
"should no longer use available widths");
nscoord availableISize = aReflowInput.AvailableISize();
availableISize -= startEdge + borderPadding.IEnd(frameWM);
aReflowInput.mLineLayout->BeginSpan(this, &aReflowInput,
startEdge, availableISize, &mBaseline);
aStatus = NS_FRAME_COMPLETE;
for (RubySegmentEnumerator e(this); !e.AtEnd(); e.Next()) {
ReflowSegment(aPresContext, aReflowInput, e.GetBaseContainer(), aStatus);
if (NS_INLINE_IS_BREAK(aStatus)) {
// A break occurs when reflowing the segment.
// Don't continue reflowing more segments.
break;
}
}
ContinuationTraversingState pullState(this);
while (aStatus == NS_FRAME_COMPLETE) {
nsRubyBaseContainerFrame* baseContainer =
PullOneSegment(aReflowInput.mLineLayout, pullState);
if (!baseContainer) {
// No more continuations after, finish now.
break;
}
ReflowSegment(aPresContext, aReflowInput, baseContainer, aStatus);
}
// We never handle overflow in ruby.
MOZ_ASSERT(!NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus));
aDesiredSize.ISize(lineWM) = aReflowInput.mLineLayout->EndSpan(this);
if (boxDecorationBreakClone || !GetPrevContinuation()) {
aDesiredSize.ISize(lineWM) += borderPadding.IStart(frameWM);
}
if (boxDecorationBreakClone || NS_FRAME_IS_COMPLETE(aStatus)) {
aDesiredSize.ISize(lineWM) += borderPadding.IEnd(frameWM);
}
nsLayoutUtils::SetBSizeFromFontMetrics(this, aDesiredSize,
borderPadding, lineWM, frameWM);
}
void
nsAbsoluteContainingBlock::ReflowAbsoluteFrame(nsIFrame* aDelegatingFrame,
nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
const nsRect& aContainingBlock,
AbsPosReflowFlags aFlags,
nsIFrame* aKidFrame,
nsReflowStatus& aStatus,
nsOverflowAreas* aOverflowAreas)
{
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent);
printf("abs pos ");
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
char width[16];
char height[16];
PrettyUC(aReflowInput.AvailableWidth(), width, 16);
PrettyUC(aReflowInput.AvailableHeight(), height, 16);
printf(" a=%s,%s ", width, height);
PrettyUC(aReflowInput.ComputedWidth(), width, 16);
PrettyUC(aReflowInput.ComputedHeight(), height, 16);
printf("c=%s,%s \n", width, height);
}
AutoNoisyIndenter indent(nsBlockFrame::gNoisy);
#endif // DEBUG
WritingMode wm = aKidFrame->GetWritingMode();
LogicalSize logicalCBSize(wm, aContainingBlock.Size());
nscoord availISize = logicalCBSize.ISize(wm);
if (availISize == -1) {
NS_ASSERTION(aReflowInput.ComputedSize(wm).ISize(wm) !=
NS_UNCONSTRAINEDSIZE,
"Must have a useful inline-size _somewhere_");
availISize =
aReflowInput.ComputedSizeWithPadding(wm).ISize(wm);
}
uint32_t rsFlags = 0;
if (aFlags & AbsPosReflowFlags::eIsGridContainerCB) {
// When a grid container generates the abs.pos. CB for a *child* then
// the static-position is the CB origin (i.e. of the grid area rect).
// https://drafts.csswg.org/css-grid/#static-position
nsIFrame* placeholder =
aPresContext->PresShell()->GetPlaceholderFrameFor(aKidFrame);
if (placeholder && placeholder->GetParent() == aDelegatingFrame) {
rsFlags |= ReflowInput::STATIC_POS_IS_CB_ORIGIN;
}
}
ReflowInput kidReflowInput(aPresContext, aReflowInput, aKidFrame,
LogicalSize(wm, availISize,
NS_UNCONSTRAINEDSIZE),
&logicalCBSize, rsFlags);
// Get the border values
WritingMode outerWM = aReflowInput.GetWritingMode();
const LogicalMargin border(outerWM,
aReflowInput.mStyleBorder->GetComputedBorder());
LogicalMargin margin =
kidReflowInput.ComputedLogicalMargin().ConvertTo(outerWM, wm);
// If we're doing CSS Box Alignment in either axis, that will apply the
// margin for us in that axis (since the thing that's aligned is the margin
// box). So, we clear out the margin here to avoid applying it twice.
if (kidReflowInput.mFlags.mIOffsetsNeedCSSAlign) {
margin.IStart(outerWM) = margin.IEnd(outerWM) = 0;
}
if (kidReflowInput.mFlags.mBOffsetsNeedCSSAlign) {
margin.BStart(outerWM) = margin.BEnd(outerWM) = 0;
}
bool constrainBSize = (aReflowInput.AvailableBSize() != NS_UNCONSTRAINEDSIZE)
&& (aFlags & AbsPosReflowFlags::eConstrainHeight)
// Don't split if told not to (e.g. for fixed frames)
&& (aDelegatingFrame->GetType() != nsGkAtoms::inlineFrame)
//XXX we don't handle splitting frames for inline absolute containing blocks yet
&& (aKidFrame->GetLogicalRect(aContainingBlock.Size()).BStart(wm) <=
aReflowInput.AvailableBSize());
// Don't split things below the fold. (Ideally we shouldn't *have*
// anything totally below the fold, but we can't position frames
// across next-in-flow breaks yet.
if (constrainBSize) {
kidReflowInput.AvailableBSize() =
aReflowInput.AvailableBSize() - border.ConvertTo(wm, outerWM).BStart(wm) -
kidReflowInput.ComputedLogicalMargin().BStart(wm);
if (NS_AUTOOFFSET != kidReflowInput.ComputedLogicalOffsets().BStart(wm)) {
kidReflowInput.AvailableBSize() -=
kidReflowInput.ComputedLogicalOffsets().BStart(wm);
}
}
// Do the reflow
ReflowOutput kidDesiredSize(kidReflowInput);
aKidFrame->Reflow(aPresContext, kidDesiredSize, kidReflowInput, aStatus);
const LogicalSize kidSize = kidDesiredSize.Size(wm).ConvertTo(outerWM, wm);
LogicalMargin offsets =
kidReflowInput.ComputedLogicalOffsets().ConvertTo(outerWM, wm);
// If we're solving for start in either inline or block direction,
// then compute it now that we know the dimensions.
ResolveSizeDependentOffsets(aPresContext, kidReflowInput, kidSize, margin,
&offsets, &logicalCBSize);
// Position the child relative to our padding edge
LogicalRect rect(outerWM,
border.IStart(outerWM) + offsets.IStart(outerWM) +
margin.IStart(outerWM),
border.BStart(outerWM) + offsets.BStart(outerWM) +
margin.BStart(outerWM),
kidSize.ISize(outerWM), kidSize.BSize(outerWM));
nsRect r =
rect.GetPhysicalRect(outerWM, logicalCBSize.GetPhysicalSize(wm) +
border.Size(outerWM).GetPhysicalSize(outerWM));
// Offset the frame rect by the given origin of the absolute containing block.
// If the frame is auto-positioned on both sides of an axis, it will be
// positioned based on its containing block and we don't need to offset
// (unless the caller demands it (the STATIC_POS_IS_CB_ORIGIN case)).
if (aContainingBlock.TopLeft() != nsPoint(0, 0)) {
const nsStyleSides& offsets = kidReflowInput.mStylePosition->mOffset;
if (!(offsets.GetLeftUnit() == eStyleUnit_Auto &&
offsets.GetRightUnit() == eStyleUnit_Auto) ||
(rsFlags & ReflowInput::STATIC_POS_IS_CB_ORIGIN)) {
r.x += aContainingBlock.x;
}
if (!(offsets.GetTopUnit() == eStyleUnit_Auto &&
offsets.GetBottomUnit() == eStyleUnit_Auto) ||
(rsFlags & ReflowInput::STATIC_POS_IS_CB_ORIGIN)) {
r.y += aContainingBlock.y;
}
}
aKidFrame->SetRect(r);
nsView* view = aKidFrame->GetView();
if (view) {
// Size and position the view and set its opacity, visibility, content
// transparency, and clip
nsContainerFrame::SyncFrameViewAfterReflow(aPresContext, aKidFrame, view,
kidDesiredSize.VisualOverflow());
} else {
nsContainerFrame::PositionChildViews(aKidFrame);
}
aKidFrame->DidReflow(aPresContext, &kidReflowInput,
nsDidReflowStatus::FINISHED);
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent - 1);
printf("abs pos ");
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
printf("%p rect=%d,%d,%d,%d\n", static_cast<void*>(aKidFrame),
r.x, r.y, r.width, r.height);
}
#endif
if (aOverflowAreas) {
aOverflowAreas->UnionWith(kidDesiredSize.mOverflowAreas + r.TopLeft());
}
}
