bool D_PAD::GetBestAnchorPosition( VECTOR2I& aPos )
{
SHAPE_POLY_SET poly;
if( !buildCustomPadPolygon( &poly, ARC_LOW_DEF ) )
return false;
const int minSteps = 10;
const int maxSteps = 50;
int stepsX, stepsY;
auto bbox = poly.BBox();
if( bbox.GetWidth() < bbox.GetHeight() )
{
stepsX = minSteps;
stepsY = minSteps * (double) bbox.GetHeight() / (double )(bbox.GetWidth() + 1);
}
else
{
stepsY = minSteps;
stepsX = minSteps * (double) bbox.GetWidth() / (double )(bbox.GetHeight() + 1);
}
stepsX = std::max(minSteps, std::min( maxSteps, stepsX ) );
stepsY = std::max(minSteps, std::min( maxSteps, stepsY ) );
auto center = bbox.Centre();
auto minDist = std::numeric_limits<int64_t>::max();
int64_t minDistEdge;
if( GetAnchorPadShape() == PAD_SHAPE_CIRCLE )
{
minDistEdge = GetSize().x;
}
else
{
minDistEdge = std::max( GetSize().x, GetSize().y );
}
OPT<VECTOR2I> bestAnchor( []()->OPT<VECTOR2I> { return NULLOPT; }() );
for ( int y = 0; y < stepsY ; y++ )
{
for ( int x = 0; x < stepsX; x++ )
{
VECTOR2I p = bbox.GetPosition();
p.x += rescale( x, bbox.GetWidth(), (stepsX - 1) );
p.y += rescale( y, bbox.GetHeight(), (stepsY - 1) );
if ( poly.Contains(p) )
{
auto dist = (center - p).EuclideanNorm();
auto distEdge = poly.COutline(0).Distance( p, true );
if ( distEdge >= minDistEdge )
{
if ( dist < minDist )
{
bestAnchor = p;
minDist = dist;
}
}
}
}
}
if ( bestAnchor )
{
aPos = *bestAnchor;
return true;
}
return false;
}
void ZONE_FILLER::buildUnconnectedThermalStubsPolygonList( SHAPE_POLY_SET& aCornerBuffer,
const ZONE_CONTAINER* aZone,
const SHAPE_POLY_SET& aRawFilledArea,
double aArcCorrection,
double aRoundPadThermalRotation ) const
{
SHAPE_LINE_CHAIN spokes;
BOX2I itemBB;
VECTOR2I ptTest[4];
auto zoneBB = aRawFilledArea.BBox();
int zone_clearance = aZone->GetZoneClearance();
int biggest_clearance = m_board->GetDesignSettings().GetBiggestClearanceValue();
biggest_clearance = std::max( biggest_clearance, zone_clearance );
zoneBB.Inflate( biggest_clearance );
// half size of the pen used to draw/plot zones outlines
int pen_radius = aZone->GetMinThickness() / 2;
for( auto module : m_board->Modules() )
{
for( auto pad : module->Pads() )
{
// Rejects non-standard pads with tht-only thermal reliefs
if( aZone->GetPadConnection( pad ) == PAD_ZONE_CONN_THT_THERMAL
&& pad->GetAttribute() != PAD_ATTRIB_STANDARD )
continue;
if( aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THERMAL
&& aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THT_THERMAL )
continue;
if( !pad->IsOnLayer( aZone->GetLayer() ) )
continue;
if( pad->GetNetCode() != aZone->GetNetCode() )
continue;
// Calculate thermal bridge half width
int thermalBridgeWidth = aZone->GetThermalReliefCopperBridge( pad )
- aZone->GetMinThickness();
if( thermalBridgeWidth <= 0 )
continue;
// we need the thermal bridge half width
// with a small extra size to be sure we create a stub
// slightly larger than the actual stub
thermalBridgeWidth = ( thermalBridgeWidth + 4 ) / 2;
int thermalReliefGap = aZone->GetThermalReliefGap( pad );
itemBB = pad->GetBoundingBox();
itemBB.Inflate( thermalReliefGap );
if( !( itemBB.Intersects( zoneBB ) ) )
continue;
// Thermal bridges are like a segment from a starting point inside the pad
// to an ending point outside the pad
// calculate the ending point of the thermal pad, outside the pad
VECTOR2I endpoint;
endpoint.x = ( pad->GetSize().x / 2 ) + thermalReliefGap;
endpoint.y = ( pad->GetSize().y / 2 ) + thermalReliefGap;
// Calculate the starting point of the thermal stub
// inside the pad
VECTOR2I startpoint;
int copperThickness = aZone->GetThermalReliefCopperBridge( pad )
- aZone->GetMinThickness();
if( copperThickness < 0 )
copperThickness = 0;
// Leave a small extra size to the copper area inside to pad
copperThickness += KiROUND( IU_PER_MM * 0.04 );
startpoint.x = std::min( pad->GetSize().x, copperThickness );
startpoint.y = std::min( pad->GetSize().y, copperThickness );
startpoint.x /= 2;
startpoint.y /= 2;
// This is a CIRCLE pad tweak
// for circle pads, the thermal stubs orientation is 45 deg
double fAngle = pad->GetOrientation();
if( pad->GetShape() == PAD_SHAPE_CIRCLE )
{
endpoint.x = KiROUND( endpoint.x * aArcCorrection );
endpoint.y = endpoint.x;
fAngle = aRoundPadThermalRotation;
}
// contour line width has to be taken into calculation to avoid "thermal stub bleed"
endpoint.x += pen_radius;
endpoint.y += pen_radius;
// compute north, south, west and east points for zone connection.
ptTest[0] = VECTOR2I( 0, endpoint.y ); // lower point
ptTest[1] = VECTOR2I( 0, -endpoint.y ); // upper point
ptTest[2] = VECTOR2I( endpoint.x, 0 ); // right point
ptTest[3] = VECTOR2I( -endpoint.x, 0 ); // left point
// Test all sides
for( int i = 0; i < 4; i++ )
{
// rotate point
RotatePoint( ptTest[i], fAngle );
// translate point
ptTest[i] += pad->ShapePos();
if( aRawFilledArea.Contains( ptTest[i] ) )
continue;
spokes.Clear();
// polygons are rectangles with width of copper bridge value
switch( i )
{
case 0: // lower stub
spokes.Append( -thermalBridgeWidth, endpoint.y );
spokes.Append( +thermalBridgeWidth, endpoint.y );
spokes.Append( +thermalBridgeWidth, startpoint.y );
spokes.Append( -thermalBridgeWidth, startpoint.y );
break;
case 1: // upper stub
spokes.Append( -thermalBridgeWidth, -endpoint.y );
spokes.Append( +thermalBridgeWidth, -endpoint.y );
spokes.Append( +thermalBridgeWidth, -startpoint.y );
spokes.Append( -thermalBridgeWidth, -startpoint.y );
break;
case 2: // right stub
spokes.Append( endpoint.x, -thermalBridgeWidth );
spokes.Append( endpoint.x, thermalBridgeWidth );
spokes.Append( +startpoint.x, thermalBridgeWidth );
spokes.Append( +startpoint.x, -thermalBridgeWidth );
break;
case 3: // left stub
spokes.Append( -endpoint.x, -thermalBridgeWidth );
spokes.Append( -endpoint.x, thermalBridgeWidth );
spokes.Append( -startpoint.x, thermalBridgeWidth );
spokes.Append( -startpoint.x, -thermalBridgeWidth );
break;
}
aCornerBuffer.NewOutline();
// add computed polygon to list
for( int ic = 0; ic < spokes.PointCount(); ic++ )
{
auto cpos = spokes.CPoint( ic );
RotatePoint( cpos, fAngle ); // Rotate according to module orientation
cpos += pad->ShapePos(); // Shift origin to position
aCornerBuffer.Append( cpos );
}
}
}
}
}
void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
const SHAPE_POLY_SET &aMainPath,
CGENERICCONTAINER2D &aDstContainer,
float aBiuTo3DunitsScale,
float aDivFactor,
const BOARD_ITEM &aBoardItem )
{
BOX2I pathBounds = aMainPath.BBox();
// Get the path
wxASSERT( aMainPath.OutlineCount() == 1 );
const SHAPE_POLY_SET::POLYGON& curr_polywithholes = aMainPath.CPolygon( 0 );
wxASSERT( curr_polywithholes.size() == 1 );
const SHAPE_LINE_CHAIN& path = curr_polywithholes[0]; // a simple polygon
// Convert the points to segments class
CBBOX2D bbox;
bbox.Reset();
// Contains the main list of segments and each segment normal interpolated
SEGMENTS_WIDTH_NORMALS segments_and_normals;
// Contains a closed polygon used to calc if points are inside
SEGMENTS segments;
segments_and_normals.resize( path.PointCount() );
segments.resize( path.PointCount() );
for( int i = 0; i < path.PointCount(); i++ )
{
const VECTOR2I& a = path.CPoint( i );
const SFVEC2F point ( (float)( a.x) * aBiuTo3DunitsScale,
(float)(-a.y) * aBiuTo3DunitsScale );
bbox.Union( point );
segments_and_normals[i].m_Start = point;
segments[i].m_Start = point;
}
bbox.ScaleNextUp();
// Calc the slopes, normals and some statistics about this polygon
unsigned int i;
unsigned int j = segments_and_normals.size() - 1;
// Temporary normal to the segment, it will later be used for interpolation
std::vector< SFVEC2F > tmpSegmentNormals;
tmpSegmentNormals.resize( segments_and_normals.size() );
float medOfTheSquaresSegmentLength = 0.0f;
#ifdef PRINT_STATISTICS_3D_VIEWER
float minLength = FLT_MAX;
#endif
for( i = 0; i < segments_and_normals.size(); j = i++ )
{
const SFVEC2F slope = segments_and_normals[j].m_Start -
segments_and_normals[i].m_Start;
segments_and_normals[i].m_Precalc_slope = slope;
// Calculate constants for each segment
segments[i].m_inv_JY_minus_IY = 1.0f / ( segments_and_normals[j].m_Start.y -
segments_and_normals[i].m_Start.y );
segments[i].m_JX_minus_IX = ( segments_and_normals[j].m_Start.x -
segments_and_normals[i].m_Start.x );
// The normal orientation expect a fixed polygon orientation (!TODO: which one?)
//tmpSegmentNormals[i] = glm::normalize( SFVEC2F( -slope.y, +slope.x ) );
tmpSegmentNormals[i] = glm::normalize( SFVEC2F( slope.y, -slope.x ) );
const float length = slope.x * slope.x + slope.y * slope.y;
#ifdef PRINT_STATISTICS_3D_VIEWER
if( length < minLength )
minLength = length;
#endif
medOfTheSquaresSegmentLength += length;
}
#ifdef PRINT_STATISTICS_3D_VIEWER
float minSegmentLength = sqrt( minLength );
#endif
// This calc an approximation of medium lengths, that will be used to calc
// the size of the division.
medOfTheSquaresSegmentLength /= segments_and_normals.size();
medOfTheSquaresSegmentLength = sqrt( medOfTheSquaresSegmentLength );
// Compute the normal interpolation
// If calculate the dot between the segments, if they are above/below some
// threshould it will not interpolated it (ex: if you are in a edge corner
// or in a smooth transaction)
j = segments_and_normals.size() - 1;
for( i = 0; i < segments_and_normals.size(); j = i++ )
{
const SFVEC2F normalBeforeSeg = tmpSegmentNormals[j];
const SFVEC2F normalSeg = tmpSegmentNormals[i];
const SFVEC2F normalAfterSeg = tmpSegmentNormals[ (i + 1) %
segments_and_normals.size() ];
const float dotBefore = glm::dot( normalBeforeSeg, normalSeg );
const float dotAfter = glm::dot( normalAfterSeg, normalSeg );
if( dotBefore < 0.7f )
segments_and_normals[i].m_Normals.m_Start = normalSeg;
else
segments_and_normals[i].m_Normals.m_Start =
glm::normalize( (((normalBeforeSeg * dotBefore ) + normalSeg) * 0.5f) );
if( dotAfter < 0.7f )
segments_and_normals[i].m_Normals.m_End = normalSeg;
else
segments_and_normals[i].m_Normals.m_End =
glm::normalize( (((normalAfterSeg * dotAfter ) + normalSeg) * 0.5f) );
}
if( aDivFactor == 0.0f )
aDivFactor = medOfTheSquaresSegmentLength;
SFVEC2UI grid_divisions;
grid_divisions.x = (unsigned int)( (bbox.GetExtent().x / aDivFactor) );
grid_divisions.y = (unsigned int)( (bbox.GetExtent().y / aDivFactor) );
grid_divisions = glm::clamp( grid_divisions ,
SFVEC2UI( 1, 1 ),
SFVEC2UI( MAX_NR_DIVISIONS, MAX_NR_DIVISIONS ) );
// Calculate the steps advance of the grid
SFVEC2F blockAdvance;
blockAdvance.x = bbox.GetExtent().x / (float)grid_divisions.x;
blockAdvance.y = bbox.GetExtent().y / (float)grid_divisions.y;
wxASSERT( blockAdvance.x > 0.0f );
wxASSERT( blockAdvance.y > 0.0f );
const int leftToRight_inc = (pathBounds.GetRight() - pathBounds.GetLeft()) /
grid_divisions.x;
const int topToBottom_inc = (pathBounds.GetBottom() - pathBounds.GetTop()) /
grid_divisions.y;
// Statistics
unsigned int stats_n_empty_blocks = 0;
unsigned int stats_n_dummy_blocks = 0;
unsigned int stats_n_poly_blocks = 0;
unsigned int stats_sum_size_of_polygons = 0;
// Step by each block of a grid trying to extract segments and create
// polygon blocks
int topToBottom = pathBounds.GetTop();
float blockY = bbox.Max().y;
for( unsigned int iy = 0; iy < grid_divisions.y; iy++ )
{
int leftToRight = pathBounds.GetLeft();
float blockX = bbox.Min().x;
for( unsigned int ix = 0; ix < grid_divisions.x; ix++ )
{
CBBOX2D blockBox( SFVEC2F( blockX,
blockY - blockAdvance.y ),
SFVEC2F( blockX + blockAdvance.x,
blockY ) );
// Make the box large to it will catch (intersect) the edges
blockBox.ScaleNextUp();
blockBox.ScaleNextUp();
blockBox.ScaleNextUp();
SEGMENTS_WIDTH_NORMALS extractedSegments;
extractPathsFrom( segments_and_normals, blockBox, extractedSegments );
if( extractedSegments.empty() )
{
SFVEC2F p1( blockBox.Min().x, blockBox.Min().y );
SFVEC2F p2( blockBox.Max().x, blockBox.Min().y );
SFVEC2F p3( blockBox.Max().x, blockBox.Max().y );
SFVEC2F p4( blockBox.Min().x, blockBox.Max().y );
if( polygon_IsPointInside( segments, p1 ) ||
polygon_IsPointInside( segments, p2 ) ||
polygon_IsPointInside( segments, p3 ) ||
polygon_IsPointInside( segments, p4 ) )
{
// In this case, the segments are not intersecting the
// polygon, so it means that if any point is inside it,
// then all other are inside the polygon.
// This is a full bbox inside, so add a dummy box
aDstContainer.Add( new CDUMMYBLOCK2D( blockBox, aBoardItem ) );
stats_n_dummy_blocks++;
}
else
{
// Points are outside, so this block complety missed the polygon
// In this case, no objects need to be added
stats_n_empty_blocks++;
}
}
else
{
// At this point, the borders of polygon were intersected by the
// bounding box, so we must calculate a new polygon that will
// close that small block.
// This block will be used to calculate if points are inside
// the (sub block) polygon.
SHAPE_POLY_SET subBlockPoly;
SHAPE_LINE_CHAIN sb = SHAPE_LINE_CHAIN(
VECTOR2I( leftToRight,
topToBottom ),
VECTOR2I( leftToRight + leftToRight_inc,
topToBottom ),
VECTOR2I( leftToRight + leftToRight_inc,
topToBottom + topToBottom_inc ),
VECTOR2I( leftToRight,
topToBottom + topToBottom_inc ) );
//sb.Append( leftToRight, topToBottom );
sb.SetClosed( true );
subBlockPoly.AddOutline( sb );
// We need here a strictly simple polygon with outlines and holes
SHAPE_POLY_SET solution;
solution.BooleanIntersection( aMainPath,
subBlockPoly,
SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
OUTERS_AND_HOLES outersAndHoles;
outersAndHoles.m_Holes.clear();
outersAndHoles.m_Outers.clear();
for( int idx = 0; idx < solution.OutlineCount(); idx++ )
{
const SHAPE_LINE_CHAIN & outline = solution.Outline( idx );
SEGMENTS solutionSegment;
polygon_Convert( outline, solutionSegment, aBiuTo3DunitsScale );
outersAndHoles.m_Outers.push_back( solutionSegment );
stats_sum_size_of_polygons += solutionSegment.size();
for( int holeIdx = 0;
holeIdx < solution.HoleCount( idx );
holeIdx++ )
{
const SHAPE_LINE_CHAIN & hole = solution.Hole( idx, holeIdx );
polygon_Convert( hole, solutionSegment, aBiuTo3DunitsScale );
outersAndHoles.m_Holes.push_back( solutionSegment );
stats_sum_size_of_polygons += solutionSegment.size();
}
}
if( !outersAndHoles.m_Outers.empty() )
{
aDstContainer.Add( new CPOLYGONBLOCK2D( extractedSegments,
outersAndHoles,
aBoardItem ) );
stats_n_poly_blocks++;
}
}
blockX += blockAdvance.x;
leftToRight += leftToRight_inc;
}
blockY -= blockAdvance.y;
topToBottom += topToBottom_inc;
}
#ifdef PRINT_STATISTICS_3D_VIEWER
printf( "////////////////////////////////////////////////////////////////////////////////\n" );
printf( "Convert_path_polygon_to_polygon_blocks_and_dummy_blocks\n" );
printf( " grid_divisions (%u, %u)\n", grid_divisions.x, grid_divisions.y );
printf( " N Total Blocks %u\n", grid_divisions.x * grid_divisions.y );
printf( " N Empty Blocks %u\n", stats_n_empty_blocks );
printf( " N Dummy Blocks %u\n", stats_n_dummy_blocks );
printf( " N Polyg Blocks %u\n", stats_n_poly_blocks );
printf( " Med N Seg Poly %u\n", stats_sum_size_of_polygons / stats_n_poly_blocks );
printf( " medOfTheSquaresSegmentLength %f\n", medOfTheSquaresSegmentLength );
printf( " minSegmentLength %f\n", minSegmentLength );
printf( " aDivFactor %f\n", aDivFactor );
printf( "////////////////////////////////////////////////////////////////////////////////\n" );
#endif
}
