void TransformOvalClearanceToPolygon( SHAPE_POLY_SET& aCornerBuffer,
wxPoint aStart, wxPoint aEnd, int aWidth,
int aCircleToSegmentsCount, double aCorrectionFactor )
{
// To build the polygonal shape outside the actual shape, we use a bigger
// radius to build rounded ends.
// However, the width of the segment is too big.
// so, later, we will clamp the polygonal shape with the bounding box
// of the segment.
int radius = aWidth / 2;
// Note if we want to compensate the radius reduction of a circle due to
// the segment approx, aCorrectionFactor must be calculated like this:
// For a circle the min radius is radius * cos( 2PI / s_CircleToSegmentsCount / 2)
// aCorrectionFactor is 1 /cos( PI/s_CircleToSegmentsCount )
radius = radius * aCorrectionFactor; // make segments outside the circles
// end point is the coordinate relative to aStart
wxPoint endp = aEnd - aStart;
wxPoint startp = aStart;
wxPoint corner;
SHAPE_POLY_SET polyshape;
polyshape.NewOutline();
// normalize the position in order to have endp.x >= 0
// it makes calculations more easy to understand
if( endp.x < 0 )
{
endp = aStart - aEnd;
startp = aEnd;
}
// delta_angle is in radian
double delta_angle = atan2( (double)endp.y, (double)endp.x );
int seg_len = KiROUND( EuclideanNorm( endp ) );
double delta = 3600.0 / aCircleToSegmentsCount; // rot angle in 0.1 degree
// Compute the outlines of the segment, and creates a polygon
// Note: the polygonal shape is built from the equivalent horizontal
// segment starting ar 0,0, and ending at seg_len,0
// add right rounded end:
for( int ii = 0; ii < aCircleToSegmentsCount/2; ii++ )
{
corner = wxPoint( 0, radius );
RotatePoint( &corner, delta*ii );
corner.x += seg_len;
polyshape.Append( corner.x, corner.y );
}
// Finish arc:
corner = wxPoint( seg_len, -radius );
polyshape.Append( corner.x, corner.y );
// add left rounded end:
for( int ii = 0; ii < aCircleToSegmentsCount/2; ii++ )
{
corner = wxPoint( 0, -radius );
RotatePoint( &corner, delta*ii );
polyshape.Append( corner.x, corner.y );
}
// Finish arc:
corner = wxPoint( 0, radius );
polyshape.Append( corner.x, corner.y );
// Now, clamp the polygonal shape (too big) with the segment bounding box
// the polygonal shape bbox equivalent to the segment has a too big height,
// and the right width
if( aCorrectionFactor > 1.0 )
{
SHAPE_POLY_SET bbox;
bbox.NewOutline();
// Build the bbox (a horizontal rectangle).
int halfwidth = aWidth / 2; // Use the exact segment width for the bbox height
corner.x = -radius - 2; // use a bbox width slightly bigger to avoid
// creating useless corner at segment ends
corner.y = halfwidth;
bbox.Append( corner.x, corner.y );
corner.y = -halfwidth;
bbox.Append( corner.x, corner.y );
corner.x = radius + seg_len + 2;
bbox.Append( corner.x, corner.y );
corner.y = halfwidth;
bbox.Append( corner.x, corner.y );
// Now, clamp the shape
polyshape.BooleanIntersection( bbox, SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
// Note the final polygon is a simple, convex polygon with no hole
// due to the shape of initial polygons
}
// Rotate and move the polygon to its right location
polyshape.Rotate( delta_angle, VECTOR2I( 0, 0 ) );
polyshape.Move( startp );
aCornerBuffer.Append( polyshape);
}
void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
const SHAPE_POLY_SET &aMainPath,
CGENERICCONTAINER2D &aDstContainer,
float aBiuTo3DunitsScale,
float aDivFactor,
const BOARD_ITEM &aBoardItem )
{
BOX2I pathBounds = aMainPath.BBox();
// Get the path
wxASSERT( aMainPath.OutlineCount() == 1 );
const SHAPE_POLY_SET::POLYGON& curr_polywithholes = aMainPath.CPolygon( 0 );
wxASSERT( curr_polywithholes.size() == 1 );
const SHAPE_LINE_CHAIN& path = curr_polywithholes[0]; // a simple polygon
// Convert the points to segments class
CBBOX2D bbox;
bbox.Reset();
// Contains the main list of segments and each segment normal interpolated
SEGMENTS_WIDTH_NORMALS segments_and_normals;
// Contains a closed polygon used to calc if points are inside
SEGMENTS segments;
segments_and_normals.resize( path.PointCount() );
segments.resize( path.PointCount() );
for( int i = 0; i < path.PointCount(); i++ )
{
const VECTOR2I& a = path.CPoint( i );
const SFVEC2F point ( (float)( a.x) * aBiuTo3DunitsScale,
(float)(-a.y) * aBiuTo3DunitsScale );
bbox.Union( point );
segments_and_normals[i].m_Start = point;
segments[i].m_Start = point;
}
bbox.ScaleNextUp();
// Calc the slopes, normals and some statistics about this polygon
unsigned int i;
unsigned int j = segments_and_normals.size() - 1;
// Temporary normal to the segment, it will later be used for interpolation
std::vector< SFVEC2F > tmpSegmentNormals;
tmpSegmentNormals.resize( segments_and_normals.size() );
float medOfTheSquaresSegmentLength = 0.0f;
#ifdef PRINT_STATISTICS_3D_VIEWER
float minLength = FLT_MAX;
#endif
for( i = 0; i < segments_and_normals.size(); j = i++ )
{
const SFVEC2F slope = segments_and_normals[j].m_Start -
segments_and_normals[i].m_Start;
segments_and_normals[i].m_Precalc_slope = slope;
// Calculate constants for each segment
segments[i].m_inv_JY_minus_IY = 1.0f / ( segments_and_normals[j].m_Start.y -
segments_and_normals[i].m_Start.y );
segments[i].m_JX_minus_IX = ( segments_and_normals[j].m_Start.x -
segments_and_normals[i].m_Start.x );
// The normal orientation expect a fixed polygon orientation (!TODO: which one?)
//tmpSegmentNormals[i] = glm::normalize( SFVEC2F( -slope.y, +slope.x ) );
tmpSegmentNormals[i] = glm::normalize( SFVEC2F( slope.y, -slope.x ) );
const float length = slope.x * slope.x + slope.y * slope.y;
#ifdef PRINT_STATISTICS_3D_VIEWER
if( length < minLength )
minLength = length;
#endif
medOfTheSquaresSegmentLength += length;
}
#ifdef PRINT_STATISTICS_3D_VIEWER
float minSegmentLength = sqrt( minLength );
#endif
// This calc an approximation of medium lengths, that will be used to calc
// the size of the division.
medOfTheSquaresSegmentLength /= segments_and_normals.size();
medOfTheSquaresSegmentLength = sqrt( medOfTheSquaresSegmentLength );
// Compute the normal interpolation
// If calculate the dot between the segments, if they are above/below some
// threshould it will not interpolated it (ex: if you are in a edge corner
// or in a smooth transaction)
j = segments_and_normals.size() - 1;
for( i = 0; i < segments_and_normals.size(); j = i++ )
{
const SFVEC2F normalBeforeSeg = tmpSegmentNormals[j];
const SFVEC2F normalSeg = tmpSegmentNormals[i];
const SFVEC2F normalAfterSeg = tmpSegmentNormals[ (i + 1) %
segments_and_normals.size() ];
const float dotBefore = glm::dot( normalBeforeSeg, normalSeg );
const float dotAfter = glm::dot( normalAfterSeg, normalSeg );
if( dotBefore < 0.7f )
segments_and_normals[i].m_Normals.m_Start = normalSeg;
else
segments_and_normals[i].m_Normals.m_Start =
glm::normalize( (((normalBeforeSeg * dotBefore ) + normalSeg) * 0.5f) );
if( dotAfter < 0.7f )
segments_and_normals[i].m_Normals.m_End = normalSeg;
else
segments_and_normals[i].m_Normals.m_End =
glm::normalize( (((normalAfterSeg * dotAfter ) + normalSeg) * 0.5f) );
}
if( aDivFactor == 0.0f )
aDivFactor = medOfTheSquaresSegmentLength;
SFVEC2UI grid_divisions;
grid_divisions.x = (unsigned int)( (bbox.GetExtent().x / aDivFactor) );
grid_divisions.y = (unsigned int)( (bbox.GetExtent().y / aDivFactor) );
grid_divisions = glm::clamp( grid_divisions ,
SFVEC2UI( 1, 1 ),
SFVEC2UI( MAX_NR_DIVISIONS, MAX_NR_DIVISIONS ) );
// Calculate the steps advance of the grid
SFVEC2F blockAdvance;
blockAdvance.x = bbox.GetExtent().x / (float)grid_divisions.x;
blockAdvance.y = bbox.GetExtent().y / (float)grid_divisions.y;
wxASSERT( blockAdvance.x > 0.0f );
wxASSERT( blockAdvance.y > 0.0f );
const int leftToRight_inc = (pathBounds.GetRight() - pathBounds.GetLeft()) /
grid_divisions.x;
const int topToBottom_inc = (pathBounds.GetBottom() - pathBounds.GetTop()) /
grid_divisions.y;
// Statistics
unsigned int stats_n_empty_blocks = 0;
unsigned int stats_n_dummy_blocks = 0;
unsigned int stats_n_poly_blocks = 0;
unsigned int stats_sum_size_of_polygons = 0;
// Step by each block of a grid trying to extract segments and create
// polygon blocks
int topToBottom = pathBounds.GetTop();
float blockY = bbox.Max().y;
for( unsigned int iy = 0; iy < grid_divisions.y; iy++ )
{
int leftToRight = pathBounds.GetLeft();
float blockX = bbox.Min().x;
for( unsigned int ix = 0; ix < grid_divisions.x; ix++ )
{
CBBOX2D blockBox( SFVEC2F( blockX,
blockY - blockAdvance.y ),
SFVEC2F( blockX + blockAdvance.x,
blockY ) );
// Make the box large to it will catch (intersect) the edges
blockBox.ScaleNextUp();
blockBox.ScaleNextUp();
blockBox.ScaleNextUp();
SEGMENTS_WIDTH_NORMALS extractedSegments;
extractPathsFrom( segments_and_normals, blockBox, extractedSegments );
if( extractedSegments.empty() )
{
SFVEC2F p1( blockBox.Min().x, blockBox.Min().y );
SFVEC2F p2( blockBox.Max().x, blockBox.Min().y );
SFVEC2F p3( blockBox.Max().x, blockBox.Max().y );
SFVEC2F p4( blockBox.Min().x, blockBox.Max().y );
if( polygon_IsPointInside( segments, p1 ) ||
polygon_IsPointInside( segments, p2 ) ||
polygon_IsPointInside( segments, p3 ) ||
polygon_IsPointInside( segments, p4 ) )
{
// In this case, the segments are not intersecting the
// polygon, so it means that if any point is inside it,
// then all other are inside the polygon.
// This is a full bbox inside, so add a dummy box
aDstContainer.Add( new CDUMMYBLOCK2D( blockBox, aBoardItem ) );
stats_n_dummy_blocks++;
}
else
{
// Points are outside, so this block complety missed the polygon
// In this case, no objects need to be added
stats_n_empty_blocks++;
}
}
else
{
// At this point, the borders of polygon were intersected by the
// bounding box, so we must calculate a new polygon that will
// close that small block.
// This block will be used to calculate if points are inside
// the (sub block) polygon.
SHAPE_POLY_SET subBlockPoly;
SHAPE_LINE_CHAIN sb = SHAPE_LINE_CHAIN(
VECTOR2I( leftToRight,
topToBottom ),
VECTOR2I( leftToRight + leftToRight_inc,
topToBottom ),
VECTOR2I( leftToRight + leftToRight_inc,
topToBottom + topToBottom_inc ),
VECTOR2I( leftToRight,
topToBottom + topToBottom_inc ) );
//sb.Append( leftToRight, topToBottom );
sb.SetClosed( true );
subBlockPoly.AddOutline( sb );
// We need here a strictly simple polygon with outlines and holes
SHAPE_POLY_SET solution;
solution.BooleanIntersection( aMainPath,
subBlockPoly,
SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
OUTERS_AND_HOLES outersAndHoles;
outersAndHoles.m_Holes.clear();
outersAndHoles.m_Outers.clear();
for( int idx = 0; idx < solution.OutlineCount(); idx++ )
{
const SHAPE_LINE_CHAIN & outline = solution.Outline( idx );
SEGMENTS solutionSegment;
polygon_Convert( outline, solutionSegment, aBiuTo3DunitsScale );
outersAndHoles.m_Outers.push_back( solutionSegment );
stats_sum_size_of_polygons += solutionSegment.size();
for( int holeIdx = 0;
holeIdx < solution.HoleCount( idx );
holeIdx++ )
{
const SHAPE_LINE_CHAIN & hole = solution.Hole( idx, holeIdx );
polygon_Convert( hole, solutionSegment, aBiuTo3DunitsScale );
outersAndHoles.m_Holes.push_back( solutionSegment );
stats_sum_size_of_polygons += solutionSegment.size();
}
}
if( !outersAndHoles.m_Outers.empty() )
{
aDstContainer.Add( new CPOLYGONBLOCK2D( extractedSegments,
outersAndHoles,
aBoardItem ) );
stats_n_poly_blocks++;
}
}
blockX += blockAdvance.x;
leftToRight += leftToRight_inc;
}
blockY -= blockAdvance.y;
topToBottom += topToBottom_inc;
}
#ifdef PRINT_STATISTICS_3D_VIEWER
printf( "////////////////////////////////////////////////////////////////////////////////\n" );
printf( "Convert_path_polygon_to_polygon_blocks_and_dummy_blocks\n" );
printf( " grid_divisions (%u, %u)\n", grid_divisions.x, grid_divisions.y );
printf( " N Total Blocks %u\n", grid_divisions.x * grid_divisions.y );
printf( " N Empty Blocks %u\n", stats_n_empty_blocks );
printf( " N Dummy Blocks %u\n", stats_n_dummy_blocks );
printf( " N Polyg Blocks %u\n", stats_n_poly_blocks );
printf( " Med N Seg Poly %u\n", stats_sum_size_of_polygons / stats_n_poly_blocks );
printf( " medOfTheSquaresSegmentLength %f\n", medOfTheSquaresSegmentLength );
printf( " minSegmentLength %f\n", minSegmentLength );
printf( " aDivFactor %f\n", aDivFactor );
printf( "////////////////////////////////////////////////////////////////////////////////\n" );
#endif
}
bool DRC_COURTYARD_OVERLAP::RunDRC( BOARD& aBoard ) const
{
wxLogTrace( DRC_COURTYARD_TRACE, "Running DRC: Courtyard" );
// Detects missing (or malformed) footprint courtyard,
// and for footprint with courtyard, courtyards overlap.
wxString msg;
bool success = true;
const DRC_MARKER_FACTORY& marker_factory = GetMarkerFactory();
// Update courtyard polygons, and test for missing courtyard definition:
for( MODULE* footprint = aBoard.m_Modules; footprint; footprint = footprint->Next() )
{
wxPoint pos = footprint->GetPosition();
bool is_ok = footprint->BuildPolyCourtyard();
if( !is_ok && aBoard.GetDesignSettings().m_ProhibitOverlappingCourtyards )
{
auto marker = std::unique_ptr<MARKER_PCB>( marker_factory.NewMarker(
pos, footprint, DRCE_MALFORMED_COURTYARD_IN_FOOTPRINT ) );
HandleMarker( std::move( marker ) );
success = false;
}
if( !aBoard.GetDesignSettings().m_RequireCourtyards )
continue;
if( footprint->GetPolyCourtyardFront().OutlineCount() == 0
&& footprint->GetPolyCourtyardBack().OutlineCount() == 0 && is_ok )
{
auto marker = std::unique_ptr<MARKER_PCB>( marker_factory.NewMarker(
pos, footprint, DRCE_MISSING_COURTYARD_IN_FOOTPRINT ) );
HandleMarker( std::move( marker ) );
success = false;
}
}
if( !aBoard.GetDesignSettings().m_ProhibitOverlappingCourtyards )
return success;
wxLogTrace( DRC_COURTYARD_TRACE, "Checking for courtyard overlap" );
// Now test for overlapping on top layer:
SHAPE_POLY_SET courtyard; // temporary storage of the courtyard of current footprint
for( MODULE* footprint = aBoard.m_Modules; footprint; footprint = footprint->Next() )
{
if( footprint->GetPolyCourtyardFront().OutlineCount() == 0 )
continue; // No courtyard defined
for( MODULE* candidate = footprint->Next(); candidate; candidate = candidate->Next() )
{
if( candidate->GetPolyCourtyardFront().OutlineCount() == 0 )
continue; // No courtyard defined
courtyard.RemoveAllContours();
courtyard.Append( footprint->GetPolyCourtyardFront() );
// Build the common area between footprint and the candidate:
courtyard.BooleanIntersection(
candidate->GetPolyCourtyardFront(), SHAPE_POLY_SET::PM_FAST );
// If no overlap, courtyard is empty (no common area).
// Therefore if a common polygon exists, this is a DRC error
if( courtyard.OutlineCount() )
{
//Overlap between footprint and candidate
VECTOR2I& pos = courtyard.Vertex( 0, 0, -1 );
auto marker = std::unique_ptr<MARKER_PCB>(
marker_factory.NewMarker( wxPoint( pos.x, pos.y ), footprint, candidate,
DRCE_OVERLAPPING_FOOTPRINTS ) );
HandleMarker( std::move( marker ) );
success = false;
}
}
}
// Test for overlapping on bottom layer:
for( MODULE* footprint = aBoard.m_Modules; footprint; footprint = footprint->Next() )
{
if( footprint->GetPolyCourtyardBack().OutlineCount() == 0 )
continue; // No courtyard defined
for( MODULE* candidate = footprint->Next(); candidate; candidate = candidate->Next() )
{
if( candidate->GetPolyCourtyardBack().OutlineCount() == 0 )
continue; // No courtyard defined
courtyard.RemoveAllContours();
courtyard.Append( footprint->GetPolyCourtyardBack() );
// Build the common area between footprint and the candidate:
courtyard.BooleanIntersection(
candidate->GetPolyCourtyardBack(), SHAPE_POLY_SET::PM_FAST );
// If no overlap, courtyard is empty (no common area).
// Therefore if a common polygon exists, this is a DRC error
if( courtyard.OutlineCount() )
{
//Overlap between footprint and candidate
VECTOR2I& pos = courtyard.Vertex( 0, 0, -1 );
auto marker = std::unique_ptr<MARKER_PCB>(
marker_factory.NewMarker( wxPoint( pos.x, pos.y ), footprint, candidate,
DRCE_OVERLAPPING_FOOTPRINTS ) );
HandleMarker( std::move( marker ) );
success = false;
}
}
}
return success;
}
