const CPOLYGONS_LIST ConvertPolySetToPolyList(const SHAPE_POLY_SET& aPolyset)
{
CPOLYGONS_LIST list;
CPolyPt corner, firstCorner;
const SHAPE_POLY_SET::POLYGON& poly = aPolyset.CPolygon( 0 );
for( unsigned int jj = 0; jj < poly.size() ; jj++ )
{
const SHAPE_LINE_CHAIN& path = poly[jj];
for( int i = 0; i < path.PointCount(); i++ )
{
const VECTOR2I &v = path.CPoint( i );
corner.x = v.x;
corner.y = v.y;
corner.end_contour = false;
if( i == 0 )
firstCorner = corner;
list.AddCorner( corner );
}
firstCorner.end_contour = true;
list.AddCorner( firstCorner );
}
return list;
}
void Polygon_Calc_BBox_3DU( const SHAPE_POLY_SET &aPolysList,
CBBOX2D &aOutBBox ,
float aBiuTo3DunitsScale )
{
aOutBBox.Reset();
for( int idx = 0; idx < aPolysList.OutlineCount(); ++idx )
{
// Each polygon in aPolysList is a polygon with holes
const SHAPE_POLY_SET::POLYGON& curr_polywithholes = aPolysList.CPolygon( idx );
for( unsigned ipoly = 0; ipoly < curr_polywithholes.size(); ++ipoly )
{
const SHAPE_LINE_CHAIN& path = curr_polywithholes[ipoly]; // a simple polygon
for( int jj = 0; jj < path.PointCount(); jj++ )
{
const VECTOR2I& a = path.CPoint( jj );
aOutBBox.Union( SFVEC2F( (float) a.x * aBiuTo3DunitsScale,
(float)-a.y * aBiuTo3DunitsScale ) );
}
}
}
aOutBBox.ScaleNextUp();
}
/**
* Function NormalizeAreaOutlines
* Convert a self-intersecting polygon to one (or more) non self-intersecting polygon(s)
* @param aNewPolygonList = a std::vector<CPolyLine*> reference where to store new CPolyLine
* needed by the normalization
* @return the polygon count (always >= 1, because there is at least one polygon)
* There are new polygons only if the polygon count is > 1
*/
int CPolyLine::NormalizeAreaOutlines( std::vector<CPolyLine*>* aNewPolygonList )
{
SHAPE_POLY_SET polySet = ConvertPolyListToPolySet( m_CornersList );
// We are expecting only one main outline, but this main outline can have holes
// if holes: combine holes and remove them from the main outline.
// Note also we are using SHAPE_POLY_SET::PM_STRICTLY_SIMPLE in polygon
// calculations, but it is not mandatory. It is used mainly
// because there is usually only very few vertices in area outlines
SHAPE_POLY_SET::POLYGON& outline = polySet.Polygon( 0 );
SHAPE_POLY_SET holesBuffer;
// Move holes stored in outline to holesBuffer:
// The first SHAPE_LINE_CHAIN is the main outline, others are holes
while( outline.size() > 1 )
{
holesBuffer.AddOutline( outline.back() );
outline.pop_back();
}
polySet.Simplify( SHAPE_POLY_SET::PM_STRICTLY_SIMPLE);
// If any hole, substract it to main outline
if( holesBuffer.OutlineCount() )
{
holesBuffer.Simplify( SHAPE_POLY_SET::PM_FAST);
polySet.BooleanSubtract( holesBuffer, SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
}
RemoveAllContours();
// Note: we can have more than outline, because a self intersecting outline will be
// broken to non intersecting polygons, and removing holes can also create a few polygons
for( int ii = 0; ii < polySet.OutlineCount(); ii++ )
{
CPolyLine* polyline = this;
if( ii > 0 )
{
polyline = new CPolyLine;
polyline->ImportSettings( this );
aNewPolygonList->push_back( polyline );
}
SHAPE_POLY_SET pnew;
pnew.NewOutline();
pnew.Polygon( 0 ) = polySet.CPolygon( ii );
polyline->m_CornersList = ConvertPolySetToPolyList( pnew );
}
return polySet.OutlineCount();
}
void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
const SHAPE_POLY_SET &aMainPath,
CGENERICCONTAINER2D &aDstContainer,
float aBiuTo3DunitsScale,
float aDivFactor,
const BOARD_ITEM &aBoardItem )
{
BOX2I pathBounds = aMainPath.BBox();
// Get the path
wxASSERT( aMainPath.OutlineCount() == 1 );
const SHAPE_POLY_SET::POLYGON& curr_polywithholes = aMainPath.CPolygon( 0 );
wxASSERT( curr_polywithholes.size() == 1 );
const SHAPE_LINE_CHAIN& path = curr_polywithholes[0]; // a simple polygon
// Convert the points to segments class
CBBOX2D bbox;
bbox.Reset();
// Contains the main list of segments and each segment normal interpolated
SEGMENTS_WIDTH_NORMALS segments_and_normals;
// Contains a closed polygon used to calc if points are inside
SEGMENTS segments;
segments_and_normals.resize( path.PointCount() );
segments.resize( path.PointCount() );
for( int i = 0; i < path.PointCount(); i++ )
{
const VECTOR2I& a = path.CPoint( i );
const SFVEC2F point ( (float)( a.x) * aBiuTo3DunitsScale,
(float)(-a.y) * aBiuTo3DunitsScale );
bbox.Union( point );
segments_and_normals[i].m_Start = point;
segments[i].m_Start = point;
}
bbox.ScaleNextUp();
// Calc the slopes, normals and some statistics about this polygon
unsigned int i;
unsigned int j = segments_and_normals.size() - 1;
// Temporary normal to the segment, it will later be used for interpolation
std::vector< SFVEC2F > tmpSegmentNormals;
tmpSegmentNormals.resize( segments_and_normals.size() );
float medOfTheSquaresSegmentLength = 0.0f;
#ifdef PRINT_STATISTICS_3D_VIEWER
float minLength = FLT_MAX;
#endif
for( i = 0; i < segments_and_normals.size(); j = i++ )
{
const SFVEC2F slope = segments_and_normals[j].m_Start -
segments_and_normals[i].m_Start;
segments_and_normals[i].m_Precalc_slope = slope;
// Calculate constants for each segment
segments[i].m_inv_JY_minus_IY = 1.0f / ( segments_and_normals[j].m_Start.y -
segments_and_normals[i].m_Start.y );
segments[i].m_JX_minus_IX = ( segments_and_normals[j].m_Start.x -
segments_and_normals[i].m_Start.x );
// The normal orientation expect a fixed polygon orientation (!TODO: which one?)
//tmpSegmentNormals[i] = glm::normalize( SFVEC2F( -slope.y, +slope.x ) );
tmpSegmentNormals[i] = glm::normalize( SFVEC2F( slope.y, -slope.x ) );
const float length = slope.x * slope.x + slope.y * slope.y;
#ifdef PRINT_STATISTICS_3D_VIEWER
if( length < minLength )
minLength = length;
#endif
medOfTheSquaresSegmentLength += length;
}
#ifdef PRINT_STATISTICS_3D_VIEWER
float minSegmentLength = sqrt( minLength );
#endif
// This calc an approximation of medium lengths, that will be used to calc
// the size of the division.
medOfTheSquaresSegmentLength /= segments_and_normals.size();
medOfTheSquaresSegmentLength = sqrt( medOfTheSquaresSegmentLength );
// Compute the normal interpolation
// If calculate the dot between the segments, if they are above/below some
// threshould it will not interpolated it (ex: if you are in a edge corner
// or in a smooth transaction)
j = segments_and_normals.size() - 1;
for( i = 0; i < segments_and_normals.size(); j = i++ )
{
const SFVEC2F normalBeforeSeg = tmpSegmentNormals[j];
const SFVEC2F normalSeg = tmpSegmentNormals[i];
const SFVEC2F normalAfterSeg = tmpSegmentNormals[ (i + 1) %
segments_and_normals.size() ];
const float dotBefore = glm::dot( normalBeforeSeg, normalSeg );
const float dotAfter = glm::dot( normalAfterSeg, normalSeg );
if( dotBefore < 0.7f )
segments_and_normals[i].m_Normals.m_Start = normalSeg;
else
segments_and_normals[i].m_Normals.m_Start =
glm::normalize( (((normalBeforeSeg * dotBefore ) + normalSeg) * 0.5f) );
if( dotAfter < 0.7f )
segments_and_normals[i].m_Normals.m_End = normalSeg;
else
segments_and_normals[i].m_Normals.m_End =
glm::normalize( (((normalAfterSeg * dotAfter ) + normalSeg) * 0.5f) );
}
if( aDivFactor == 0.0f )
aDivFactor = medOfTheSquaresSegmentLength;
SFVEC2UI grid_divisions;
grid_divisions.x = (unsigned int)( (bbox.GetExtent().x / aDivFactor) );
grid_divisions.y = (unsigned int)( (bbox.GetExtent().y / aDivFactor) );
grid_divisions = glm::clamp( grid_divisions ,
SFVEC2UI( 1, 1 ),
SFVEC2UI( MAX_NR_DIVISIONS, MAX_NR_DIVISIONS ) );
// Calculate the steps advance of the grid
SFVEC2F blockAdvance;
blockAdvance.x = bbox.GetExtent().x / (float)grid_divisions.x;
blockAdvance.y = bbox.GetExtent().y / (float)grid_divisions.y;
wxASSERT( blockAdvance.x > 0.0f );
wxASSERT( blockAdvance.y > 0.0f );
const int leftToRight_inc = (pathBounds.GetRight() - pathBounds.GetLeft()) /
grid_divisions.x;
const int topToBottom_inc = (pathBounds.GetBottom() - pathBounds.GetTop()) /
grid_divisions.y;
// Statistics
unsigned int stats_n_empty_blocks = 0;
unsigned int stats_n_dummy_blocks = 0;
unsigned int stats_n_poly_blocks = 0;
unsigned int stats_sum_size_of_polygons = 0;
// Step by each block of a grid trying to extract segments and create
// polygon blocks
int topToBottom = pathBounds.GetTop();
float blockY = bbox.Max().y;
for( unsigned int iy = 0; iy < grid_divisions.y; iy++ )
{
int leftToRight = pathBounds.GetLeft();
float blockX = bbox.Min().x;
for( unsigned int ix = 0; ix < grid_divisions.x; ix++ )
{
CBBOX2D blockBox( SFVEC2F( blockX,
blockY - blockAdvance.y ),
SFVEC2F( blockX + blockAdvance.x,
blockY ) );
// Make the box large to it will catch (intersect) the edges
blockBox.ScaleNextUp();
blockBox.ScaleNextUp();
blockBox.ScaleNextUp();
SEGMENTS_WIDTH_NORMALS extractedSegments;
extractPathsFrom( segments_and_normals, blockBox, extractedSegments );
if( extractedSegments.empty() )
{
SFVEC2F p1( blockBox.Min().x, blockBox.Min().y );
SFVEC2F p2( blockBox.Max().x, blockBox.Min().y );
SFVEC2F p3( blockBox.Max().x, blockBox.Max().y );
SFVEC2F p4( blockBox.Min().x, blockBox.Max().y );
if( polygon_IsPointInside( segments, p1 ) ||
polygon_IsPointInside( segments, p2 ) ||
polygon_IsPointInside( segments, p3 ) ||
polygon_IsPointInside( segments, p4 ) )
{
// In this case, the segments are not intersecting the
// polygon, so it means that if any point is inside it,
// then all other are inside the polygon.
// This is a full bbox inside, so add a dummy box
aDstContainer.Add( new CDUMMYBLOCK2D( blockBox, aBoardItem ) );
stats_n_dummy_blocks++;
}
else
{
// Points are outside, so this block complety missed the polygon
// In this case, no objects need to be added
stats_n_empty_blocks++;
}
}
else
{
// At this point, the borders of polygon were intersected by the
// bounding box, so we must calculate a new polygon that will
// close that small block.
// This block will be used to calculate if points are inside
// the (sub block) polygon.
SHAPE_POLY_SET subBlockPoly;
SHAPE_LINE_CHAIN sb = SHAPE_LINE_CHAIN(
VECTOR2I( leftToRight,
topToBottom ),
VECTOR2I( leftToRight + leftToRight_inc,
topToBottom ),
VECTOR2I( leftToRight + leftToRight_inc,
topToBottom + topToBottom_inc ),
VECTOR2I( leftToRight,
topToBottom + topToBottom_inc ) );
//sb.Append( leftToRight, topToBottom );
sb.SetClosed( true );
subBlockPoly.AddOutline( sb );
// We need here a strictly simple polygon with outlines and holes
SHAPE_POLY_SET solution;
solution.BooleanIntersection( aMainPath,
subBlockPoly,
SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
OUTERS_AND_HOLES outersAndHoles;
outersAndHoles.m_Holes.clear();
outersAndHoles.m_Outers.clear();
for( int idx = 0; idx < solution.OutlineCount(); idx++ )
{
const SHAPE_LINE_CHAIN & outline = solution.Outline( idx );
SEGMENTS solutionSegment;
polygon_Convert( outline, solutionSegment, aBiuTo3DunitsScale );
outersAndHoles.m_Outers.push_back( solutionSegment );
stats_sum_size_of_polygons += solutionSegment.size();
for( int holeIdx = 0;
holeIdx < solution.HoleCount( idx );
holeIdx++ )
{
const SHAPE_LINE_CHAIN & hole = solution.Hole( idx, holeIdx );
polygon_Convert( hole, solutionSegment, aBiuTo3DunitsScale );
outersAndHoles.m_Holes.push_back( solutionSegment );
stats_sum_size_of_polygons += solutionSegment.size();
}
}
if( !outersAndHoles.m_Outers.empty() )
{
aDstContainer.Add( new CPOLYGONBLOCK2D( extractedSegments,
outersAndHoles,
aBoardItem ) );
stats_n_poly_blocks++;
}
}
blockX += blockAdvance.x;
leftToRight += leftToRight_inc;
}
blockY -= blockAdvance.y;
topToBottom += topToBottom_inc;
}
#ifdef PRINT_STATISTICS_3D_VIEWER
printf( "////////////////////////////////////////////////////////////////////////////////\n" );
printf( "Convert_path_polygon_to_polygon_blocks_and_dummy_blocks\n" );
printf( " grid_divisions (%u, %u)\n", grid_divisions.x, grid_divisions.y );
printf( " N Total Blocks %u\n", grid_divisions.x * grid_divisions.y );
printf( " N Empty Blocks %u\n", stats_n_empty_blocks );
printf( " N Dummy Blocks %u\n", stats_n_dummy_blocks );
printf( " N Polyg Blocks %u\n", stats_n_poly_blocks );
printf( " Med N Seg Poly %u\n", stats_sum_size_of_polygons / stats_n_poly_blocks );
printf( " medOfTheSquaresSegmentLength %f\n", medOfTheSquaresSegmentLength );
printf( " minSegmentLength %f\n", minSegmentLength );
printf( " aDivFactor %f\n", aDivFactor );
printf( "////////////////////////////////////////////////////////////////////////////////\n" );
#endif
}
