bool GERBER_DRAW_ITEM::HitTest( const wxPoint& aRefPos ) const
{
// In case the item has a very tiny width defined, allow it to be selected
const int MIN_HIT_TEST_RADIUS = Millimeter2iu( 0.01 );
// calculate aRefPos in XY gerber axis:
wxPoint ref_pos = GetXYPosition( aRefPos );
SHAPE_POLY_SET poly;
switch( m_Shape )
{
case GBR_POLYGON:
poly = m_Polygon;
return poly.Contains( VECTOR2I( ref_pos ), 0 );
case GBR_SPOT_POLY:
poly = GetDcodeDescr()->m_Polygon;
poly.Move( m_Start );
return poly.Contains( VECTOR2I( ref_pos ), 0 );
case GBR_SPOT_RECT:
return GetBoundingBox().Contains( aRefPos );
case GBR_ARC:
{
double radius = GetLineLength( m_Start, m_ArcCentre );
VECTOR2D test_radius = VECTOR2D( ref_pos ) - VECTOR2D( m_ArcCentre );
int size = ( ( m_Size.x < MIN_HIT_TEST_RADIUS ) ? MIN_HIT_TEST_RADIUS
: m_Size.x );
// Are we close enough to the radius?
bool radius_hit = ( std::fabs( test_radius.EuclideanNorm() - radius) < size );
if( radius_hit )
{
// Now check that we are within the arc angle
VECTOR2D start = VECTOR2D( m_Start ) - VECTOR2D( m_ArcCentre );
VECTOR2D end = VECTOR2D( m_End ) - VECTOR2D( m_ArcCentre );
double start_angle = NormalizeAngleRadiansPos( start.Angle() );
double end_angle = NormalizeAngleRadiansPos( end.Angle() );
if( m_Start == m_End )
{
start_angle = 0;
end_angle = 2 * M_PI;
}
else if( end_angle < start_angle )
{
end_angle += 2 * M_PI;
}
double test_angle = NormalizeAngleRadiansPos( test_radius.Angle() );
return ( test_angle > start_angle && test_angle < end_angle );
}
return false;
}
case GBR_SPOT_MACRO:
// Aperture macro polygons are already in absolute coordinates
auto p = GetDcodeDescr()->GetMacro()->GetApertureMacroShape( this, m_Start );
for( int i = 0; i < p->OutlineCount(); ++i )
{
if( p->Contains( VECTOR2I( aRefPos ), i ) )
return true;
}
return false;
}
// TODO: a better analyze of the shape (perhaps create a D_CODE::HitTest for flashed items)
int radius = std::min( m_Size.x, m_Size.y ) >> 1;
if( radius < MIN_HIT_TEST_RADIUS )
radius = MIN_HIT_TEST_RADIUS;
if( m_Flashed )
return HitTestPoints( m_Start, ref_pos, radius );
else
return TestSegmentHit( ref_pos, m_Start, m_End, radius );
}
bool D_PAD::GetBestAnchorPosition( VECTOR2I& aPos )
{
SHAPE_POLY_SET poly;
if( !buildCustomPadPolygon( &poly, ARC_LOW_DEF ) )
return false;
const int minSteps = 10;
const int maxSteps = 50;
int stepsX, stepsY;
auto bbox = poly.BBox();
if( bbox.GetWidth() < bbox.GetHeight() )
{
stepsX = minSteps;
stepsY = minSteps * (double) bbox.GetHeight() / (double )(bbox.GetWidth() + 1);
}
else
{
stepsY = minSteps;
stepsX = minSteps * (double) bbox.GetWidth() / (double )(bbox.GetHeight() + 1);
}
stepsX = std::max(minSteps, std::min( maxSteps, stepsX ) );
stepsY = std::max(minSteps, std::min( maxSteps, stepsY ) );
auto center = bbox.Centre();
auto minDist = std::numeric_limits<int64_t>::max();
int64_t minDistEdge;
if( GetAnchorPadShape() == PAD_SHAPE_CIRCLE )
{
minDistEdge = GetSize().x;
}
else
{
minDistEdge = std::max( GetSize().x, GetSize().y );
}
OPT<VECTOR2I> bestAnchor( []()->OPT<VECTOR2I> { return NULLOPT; }() );
for ( int y = 0; y < stepsY ; y++ )
{
for ( int x = 0; x < stepsX; x++ )
{
VECTOR2I p = bbox.GetPosition();
p.x += rescale( x, bbox.GetWidth(), (stepsX - 1) );
p.y += rescale( y, bbox.GetHeight(), (stepsY - 1) );
if ( poly.Contains(p) )
{
auto dist = (center - p).EuclideanNorm();
auto distEdge = poly.COutline(0).Distance( p, true );
if ( distEdge >= minDistEdge )
{
if ( dist < minDist )
{
bestAnchor = p;
minDist = dist;
}
}
}
}
}
if ( bestAnchor )
{
aPos = *bestAnchor;
return true;
}
return false;
}
void ZONE_FILLER::buildUnconnectedThermalStubsPolygonList( SHAPE_POLY_SET& aCornerBuffer,
const ZONE_CONTAINER* aZone,
const SHAPE_POLY_SET& aRawFilledArea,
double aArcCorrection,
double aRoundPadThermalRotation ) const
{
SHAPE_LINE_CHAIN spokes;
BOX2I itemBB;
VECTOR2I ptTest[4];
auto zoneBB = aRawFilledArea.BBox();
int zone_clearance = aZone->GetZoneClearance();
int biggest_clearance = m_board->GetDesignSettings().GetBiggestClearanceValue();
biggest_clearance = std::max( biggest_clearance, zone_clearance );
zoneBB.Inflate( biggest_clearance );
// half size of the pen used to draw/plot zones outlines
int pen_radius = aZone->GetMinThickness() / 2;
for( auto module : m_board->Modules() )
{
for( auto pad : module->Pads() )
{
// Rejects non-standard pads with tht-only thermal reliefs
if( aZone->GetPadConnection( pad ) == PAD_ZONE_CONN_THT_THERMAL
&& pad->GetAttribute() != PAD_ATTRIB_STANDARD )
continue;
if( aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THERMAL
&& aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THT_THERMAL )
continue;
if( !pad->IsOnLayer( aZone->GetLayer() ) )
continue;
if( pad->GetNetCode() != aZone->GetNetCode() )
continue;
// Calculate thermal bridge half width
int thermalBridgeWidth = aZone->GetThermalReliefCopperBridge( pad )
- aZone->GetMinThickness();
if( thermalBridgeWidth <= 0 )
continue;
// we need the thermal bridge half width
// with a small extra size to be sure we create a stub
// slightly larger than the actual stub
thermalBridgeWidth = ( thermalBridgeWidth + 4 ) / 2;
int thermalReliefGap = aZone->GetThermalReliefGap( pad );
itemBB = pad->GetBoundingBox();
itemBB.Inflate( thermalReliefGap );
if( !( itemBB.Intersects( zoneBB ) ) )
continue;
// Thermal bridges are like a segment from a starting point inside the pad
// to an ending point outside the pad
// calculate the ending point of the thermal pad, outside the pad
VECTOR2I endpoint;
endpoint.x = ( pad->GetSize().x / 2 ) + thermalReliefGap;
endpoint.y = ( pad->GetSize().y / 2 ) + thermalReliefGap;
// Calculate the starting point of the thermal stub
// inside the pad
VECTOR2I startpoint;
int copperThickness = aZone->GetThermalReliefCopperBridge( pad )
- aZone->GetMinThickness();
if( copperThickness < 0 )
copperThickness = 0;
// Leave a small extra size to the copper area inside to pad
copperThickness += KiROUND( IU_PER_MM * 0.04 );
startpoint.x = std::min( pad->GetSize().x, copperThickness );
startpoint.y = std::min( pad->GetSize().y, copperThickness );
startpoint.x /= 2;
startpoint.y /= 2;
// This is a CIRCLE pad tweak
// for circle pads, the thermal stubs orientation is 45 deg
double fAngle = pad->GetOrientation();
if( pad->GetShape() == PAD_SHAPE_CIRCLE )
{
endpoint.x = KiROUND( endpoint.x * aArcCorrection );
endpoint.y = endpoint.x;
fAngle = aRoundPadThermalRotation;
}
// contour line width has to be taken into calculation to avoid "thermal stub bleed"
endpoint.x += pen_radius;
endpoint.y += pen_radius;
// compute north, south, west and east points for zone connection.
ptTest[0] = VECTOR2I( 0, endpoint.y ); // lower point
ptTest[1] = VECTOR2I( 0, -endpoint.y ); // upper point
ptTest[2] = VECTOR2I( endpoint.x, 0 ); // right point
ptTest[3] = VECTOR2I( -endpoint.x, 0 ); // left point
// Test all sides
for( int i = 0; i < 4; i++ )
{
// rotate point
RotatePoint( ptTest[i], fAngle );
// translate point
ptTest[i] += pad->ShapePos();
if( aRawFilledArea.Contains( ptTest[i] ) )
continue;
spokes.Clear();
// polygons are rectangles with width of copper bridge value
switch( i )
{
case 0: // lower stub
spokes.Append( -thermalBridgeWidth, endpoint.y );
spokes.Append( +thermalBridgeWidth, endpoint.y );
spokes.Append( +thermalBridgeWidth, startpoint.y );
spokes.Append( -thermalBridgeWidth, startpoint.y );
break;
case 1: // upper stub
spokes.Append( -thermalBridgeWidth, -endpoint.y );
spokes.Append( +thermalBridgeWidth, -endpoint.y );
spokes.Append( +thermalBridgeWidth, -startpoint.y );
spokes.Append( -thermalBridgeWidth, -startpoint.y );
break;
case 2: // right stub
spokes.Append( endpoint.x, -thermalBridgeWidth );
spokes.Append( endpoint.x, thermalBridgeWidth );
spokes.Append( +startpoint.x, thermalBridgeWidth );
spokes.Append( +startpoint.x, -thermalBridgeWidth );
break;
case 3: // left stub
spokes.Append( -endpoint.x, -thermalBridgeWidth );
spokes.Append( -endpoint.x, thermalBridgeWidth );
spokes.Append( -startpoint.x, thermalBridgeWidth );
spokes.Append( -startpoint.x, -thermalBridgeWidth );
break;
}
aCornerBuffer.NewOutline();
// add computed polygon to list
for( int ic = 0; ic < spokes.PointCount(); ic++ )
{
auto cpos = spokes.CPoint( ic );
RotatePoint( cpos, fAngle ); // Rotate according to module orientation
cpos += pad->ShapePos(); // Shift origin to position
aCornerBuffer.Append( cpos );
}
}
}
}
}
int BOARD::Test_Drc_Areas_Outlines_To_Areas_Outlines( ZONE_CONTAINER* aArea_To_Examine,
bool aCreate_Markers )
{
int nerrors = 0;
// iterate through all areas
for( int ia = 0; ia < GetAreaCount(); ia++ )
{
ZONE_CONTAINER* Area_Ref = GetArea( ia );
SHAPE_POLY_SET* refSmoothedPoly = Area_Ref->GetSmoothedPoly();
if( !Area_Ref->IsOnCopperLayer() )
continue;
// When testing only a single area, skip all others
if( aArea_To_Examine && (aArea_To_Examine != Area_Ref) )
continue;
for( int ia2 = 0; ia2 < GetAreaCount(); ia2++ )
{
ZONE_CONTAINER* area_to_test = GetArea( ia2 );
SHAPE_POLY_SET* testSmoothedPoly = area_to_test->GetSmoothedPoly();
if( Area_Ref == area_to_test )
continue;
// test for same layer
if( Area_Ref->GetLayer() != area_to_test->GetLayer() )
continue;
// Test for same net
if( Area_Ref->GetNetCode() == area_to_test->GetNetCode() && Area_Ref->GetNetCode() >= 0 )
continue;
// test for different priorities
if( Area_Ref->GetPriority() != area_to_test->GetPriority() )
continue;
// test for different types
if( Area_Ref->GetIsKeepout() != area_to_test->GetIsKeepout() )
continue;
// Examine a candidate zone: compare area_to_test to Area_Ref
// Get clearance used in zone to zone test. The policy used to
// obtain that value is now part of the zone object itself by way of
// ZONE_CONTAINER::GetClearance().
int zone2zoneClearance = Area_Ref->GetClearance( area_to_test );
// Keepout areas have no clearance, so set zone2zoneClearance to 1
// ( zone2zoneClearance = 0 can create problems in test functions)
if( Area_Ref->GetIsKeepout() )
zone2zoneClearance = 1;
// test for some corners of Area_Ref inside area_to_test
for( auto iterator = refSmoothedPoly->IterateWithHoles(); iterator; iterator++ )
{
VECTOR2I currentVertex = *iterator;
if( testSmoothedPoly->Contains( currentVertex ) )
{
// COPPERAREA_COPPERAREA error: copper area ref corner inside copper area
if( aCreate_Markers )
{
int x = currentVertex.x;
int y = currentVertex.y;
wxString msg1 = Area_Ref->GetSelectMenuText();
wxString msg2 = area_to_test->GetSelectMenuText();
MARKER_PCB* marker = new MARKER_PCB( COPPERAREA_INSIDE_COPPERAREA,
wxPoint( x, y ),
msg1, wxPoint( x, y ),
msg2, wxPoint( x, y ) );
Add( marker );
}
nerrors++;
}
}
// test for some corners of area_to_test inside Area_Ref
for( auto iterator = testSmoothedPoly->IterateWithHoles(); iterator; iterator++ )
{
VECTOR2I currentVertex = *iterator;
if( refSmoothedPoly->Contains( currentVertex ) )
{
// COPPERAREA_COPPERAREA error: copper area corner inside copper area ref
if( aCreate_Markers )
{
int x = currentVertex.x;
int y = currentVertex.y;
wxString msg1 = area_to_test->GetSelectMenuText();
wxString msg2 = Area_Ref->GetSelectMenuText();
MARKER_PCB* marker = new MARKER_PCB( COPPERAREA_INSIDE_COPPERAREA,
wxPoint( x, y ),
msg1, wxPoint( x, y ),
msg2, wxPoint( x, y ) );
Add( marker );
}
nerrors++;
}
}
// Iterate through all the segments of refSmoothedPoly
for( auto refIt = refSmoothedPoly->IterateSegmentsWithHoles(); refIt; refIt++ )
{
// Build ref segment
SEG refSegment = *refIt;
// Iterate through all the segments in testSmoothedPoly
for( auto testIt = testSmoothedPoly->IterateSegmentsWithHoles(); testIt; testIt++ )
{
// Build test segment
SEG testSegment = *testIt;
int x, y;
int ax1, ay1, ax2, ay2;
ax1 = refSegment.A.x;
ay1 = refSegment.A.y;
ax2 = refSegment.B.x;
ay2 = refSegment.B.y;
int bx1, by1, bx2, by2;
bx1 = testSegment.A.x;
by1 = testSegment.A.y;
bx2 = testSegment.B.x;
by2 = testSegment.B.y;
int d = GetClearanceBetweenSegments( bx1, by1, bx2, by2,
0,
ax1, ay1, ax2, ay2,
0,
zone2zoneClearance,
&x, &y );
if( d < zone2zoneClearance )
{
// COPPERAREA_COPPERAREA error : intersect or too close
if( aCreate_Markers )
{
wxString msg1 = Area_Ref->GetSelectMenuText();
wxString msg2 = area_to_test->GetSelectMenuText();
MARKER_PCB* marker = new MARKER_PCB( COPPERAREA_CLOSE_TO_COPPERAREA,
wxPoint( x, y ),
msg1, wxPoint( x, y ),
msg2, wxPoint( x, y ) );
Add( marker );
}
nerrors++;
}
}
}
}
}
return nerrors;
}
