wxString QMakePlugin::DoGetBuildCommand(const wxString &project, const wxString &config, bool projectOnly)
{
wxUnusedVar ( config );
wxString errMsg;
ProjectPtr p = m_mgr->GetWorkspace()->FindProjectByName(project, errMsg);
if ( !p ) {
return wxEmptyString;
}
BuildConfigPtr bldConf = WorkspaceST::Get()->GetProjBuildConf(project, config);
wxString cmd;
if ( !projectOnly ) {
cmd << wxT("@cd \"") << p->GetFileName().GetPath() << wxT("\" && ");
}
// fix: replace all Windows like slashes to POSIX
wxString command = bldConf->GetCompiler()->GetTool("MAKE");
command.Replace(wxT("\\"), wxT("/"));
cmd << command << wxT(" \"") << p->GetName() << wxT(".mk\"");
return cmd;
}
void BatchBuildDlg::DoInitialize()
{
// load the previously saved batch build file
wxFileName fn(WorkspaceST::Get()->GetWorkspaceFileName());
fn.SetExt(wxT("batch_build"));
wxString content;
wxArrayString arr;
if (ReadFileWithConversion(fn.GetFullPath(), content)) {
arr = wxStringTokenize(content, wxT("\n"), wxTOKEN_STRTOK);
for (size_t i=0; i<arr.GetCount(); i++) {
int idx = m_checkListConfigurations->Append(arr.Item(i));
m_checkListConfigurations->Check((unsigned int)idx);
}
}
// loop over all projects, for each project collect all available
// build configurations and add them to the check list control
wxArrayString projects;
WorkspaceST::Get()->GetProjectList(projects);
for (size_t i=0; i<projects.GetCount(); i++) {
ProjectPtr p = ManagerST::Get()->GetProject(projects.Item(i));
if (p) {
ProjectSettingsPtr settings = p->GetSettings();
if (settings) {
ProjectSettingsCookie cookie;
BuildConfigPtr bldConf = settings->GetFirstBuildConfiguration(cookie);
while (bldConf) {
wxString item(p->GetName() + wxT(" | ") + bldConf->GetName());
int where = arr.Index(item);
if (where == wxNOT_FOUND) {
// append this item
m_checkListConfigurations->Append(item);
} else {
// this item already been added,
// remove it from the arr and continue
arr.RemoveAt((size_t)where);
}
bldConf = settings->GetNextBuildConfiguration(cookie);
}
}
}
}
// check to see which configuration was left in 'arr'
// and remove them from the checklistbox
for (size_t i=0; i<arr.GetCount(); i++) {
int where = m_checkListConfigurations->FindString(arr.Item(i));
if (where != wxNOT_FOUND) {
m_checkListConfigurations->Delete((unsigned int)where);
}
}
arr.clear();
if (m_checkListConfigurations->GetCount()>0) {
m_checkListConfigurations->Select(0);
}
}
void LLDBDebuggerPlugin::OnDebugStart(clDebugEvent& event)
{
event.Skip();
return;
if ( ::PromptForYesNoDialogWithCheckbox(_("Would you like to use LLDB debugger as your primary debugger?"), "UseLLDB") != wxID_YES ) {
event.Skip();
return;
}
// Get the executable to debug
wxString errMsg;
ProjectPtr pProject = WorkspaceST::Get()->FindProjectByName(event.GetProjectName(), errMsg);
if ( !pProject ) {
event.Skip();
return;
}
wxSetWorkingDirectory ( pProject->GetFileName().GetPath() );
BuildConfigPtr bldConf = WorkspaceST::Get()->GetProjBuildConf ( pProject->GetName(), wxEmptyString );
if ( !bldConf ) {
event.Skip();
return;
}
// Show the terminal
ShowTerminal("LLDB Console Window");
if ( m_debugger.Start("/home/eran/devl/TestArea/TestHang/Debug/TestHang") ) {
m_debugger.AddBreakpoint("main");
m_debugger.ApplyBreakpoints();
m_debugger.Run("/tmp/in", "/tmp/out", "/tmp/err", wxArrayString(), wxArrayString(), ::wxGetCwd());
}
}
void clCxxWorkspace::RemoveProjectFromBuildMatrix(ProjectPtr prj)
{
BuildMatrixPtr matrix = GetBuildMatrix();
wxString selConfName = matrix->GetSelectedConfigurationName();
std::list<WorkspaceConfigurationPtr> wspList = matrix->GetConfigurations();
std::list<WorkspaceConfigurationPtr>::iterator iter = wspList.begin();
for(; iter != wspList.end(); iter++) {
WorkspaceConfiguration::ConfigMappingList prjList = (*iter)->GetMapping();
WorkspaceConfiguration::ConfigMappingList::iterator it = prjList.begin();
for(; it != prjList.end(); it++) {
if((*it).m_project == prj->GetName()) {
prjList.erase(it);
break;
}
}
(*iter)->SetConfigMappingList(prjList);
matrix->SetConfiguration((*iter));
}
// and set the configuration name
matrix->SetSelectedConfigurationName(selConfName);
// this will also reset the build matrix pointer
SetBuildMatrix(matrix);
}
wxString QMakePlugin::DoGetBuildCommand(const wxString& project, const wxString& config, bool projectOnly)
{
wxUnusedVar(config);
wxString errMsg;
ProjectPtr p = m_mgr->GetWorkspace()->FindProjectByName(project, errMsg);
if(!p) { return wxEmptyString; }
BuildConfigPtr bldConf = clCxxWorkspaceST::Get()->GetProjBuildConf(project, config);
wxString cmd;
wxString projectMakefile;
projectMakefile << p->GetName() << ".mk";
::WrapWithQuotes(projectMakefile);
projectMakefile.Replace("\\", "/");
if(!projectOnly) {
// part of a greater makefile, use $(MAKE)
cmd << wxT("@cd \"") << p->GetFileName().GetPath() << wxT("\" && ");
cmd << "$(MAKE) -f " << projectMakefile;
} else {
// project only
cmd = bldConf->GetCompiler()->GetTool("MAKE");
if(!cmd.Contains("-f")) { cmd << " -f "; }
cmd << " " << projectMakefile;
}
return cmd;
}
void ShellCommand::DoSetWorkingDirectory(ProjectPtr proj, bool isCustom, bool isFileOnly)
{
//when using custom build, user can select different working directory
if (proj) {
if (isCustom) {
//first set the path to the project working directory
::wxSetWorkingDirectory(proj->GetFileName().GetPath());
BuildConfigPtr buildConf = WorkspaceST::Get()->GetProjBuildConf(m_info.GetProject(), m_info.GetConfiguration());
if (buildConf) {
wxString wd = buildConf->GetCustomBuildWorkingDir();
if (wd.IsEmpty()) {
// use the project path
wd = proj->GetFileName().GetPath();
} else {
// expand macros from path
wd = ExpandAllVariables(wd, WorkspaceST::Get(), proj->GetName(), buildConf->GetName(), wxEmptyString);
}
::wxSetWorkingDirectory(wd);
}
} else {
if(m_info.GetProjectOnly() || isFileOnly) {
//first set the path to the project working directory
::wxSetWorkingDirectory(proj->GetFileName().GetPath());
}
}
}
}
void
CMakeProjectMenu::OnMakeDirty(wxCommandEvent& event)
{
// Get settings
const CMakeProjectSettings* settings = m_plugin->GetSelectedProjectSettings();
// Event shouldn't be called when project is not enabled
wxASSERT(settings && settings->enabled);
// This function just touch .cmake_dirty file
ProjectPtr project = m_plugin->GetSelectedProject();
// Real project
wxString projectName = project->GetName();
// Project has parent project -> touch dirty file there
if (!settings->parentProject.IsEmpty()) {
projectName = settings->parentProject;
}
// Move to project directory
wxFileName dirtyFile = m_plugin->GetProjectDirectory(projectName);
dirtyFile.SetFullName(".cmake_dirty");
// Update file time
dirtyFile.Touch();
}
void
CMakeProjectMenu::OnFileExists(wxUpdateUIEvent& event)
{
ProjectPtr project = m_plugin->GetSelectedProject();
if (project)
event.Enable(m_plugin->ExistsCMakeLists(m_plugin->GetProjectDirectory(project->GetName())));
}
void MemCheckPlugin::OnCheckPopupProject(wxCommandEvent& event)
{
CHECK_CL_SHUTDOWN()
ProjectPtr project = m_mgr->GetSelectedProject();
if(project) {
CheckProject(project->GetName());
}
}
void CMakePlugin::DoRunCMake(ProjectPtr p)
{
CHECK_PTR_RET(p);
BuildConfigPtr buildConf = p->GetBuildConfiguration();
CHECK_COND_RET(buildConf);
// Apply the environment variables before we do anything here
#ifdef __WXMSW__
// On Windows, we need to set the bin folder of the selected compiler
wxFileName fnCxx(buildConf->GetCompiler()->GetTool("CXX"));
wxStringMap_t om;
wxString pathvar;
pathvar << fnCxx.GetPath() << clPATH_SEPARATOR << "$PATH";
om["PATH"] = pathvar;
EnvSetter es(NULL, &om, p->GetName(), buildConf->GetName());
#else
EnvSetter es(p);
#endif
CMakeGenerator generator;
if(generator.CanGenerate(p)) {
generator.Generate(p);
}
const wxString& args = buildConf->GetBuildSystemArguments();
wxString cmakeExe = GetCMake()->GetPath().GetFullPath();
// Did the user provide a generator to use?
bool hasGeneratorInArgs = (args.Find(" -G") != wxNOT_FOUND);
// Build the working directory
wxFileName fnWorkingDirectory(CMakeBuilder::GetWorkspaceBuildFolder(false), "");
wxString workingDirectory = fnWorkingDirectory.GetPath();
// Ensure that the build directory exists
fnWorkingDirectory.Mkdir(wxS_DIR_DEFAULT, wxPATH_MKDIR_FULL);
::WrapWithQuotes(cmakeExe);
wxString command;
command << cmakeExe << " .. " << args;
if(!hasGeneratorInArgs) {
#ifdef __WXMSW__
// On Windows, generate MinGW makefiles
command << " -G\"MinGW Makefiles\"";
#endif
}
// Execute it
IProcess* proc = ::CreateAsyncProcess(this, command, IProcessCreateDefault, fnWorkingDirectory.GetPath());
if(!proc) {
::wxMessageBox(_("Failed to execute:\n") + command, "CodeLite", wxICON_ERROR | wxOK | wxCENTER,
EventNotifier::Get()->TopFrame());
return;
}
m_mgr->ShowOutputPane(_("Build"));
m_mgr->ClearOutputTab(kOutputTab_Build);
m_mgr->AppendOutputTabText(kOutputTab_Build, command + "\n");
}
void QMakePlugin::OnExportMakefile(wxCommandEvent& event)
{
if(m_qmakeProcess) return;
QmakePluginData::BuildConfPluginData bcpd;
ProjectPtr pProj = m_mgr->GetSelectedProject();
CHECK_PTR_RET(pProj);
BuildConfigPtr bldConf = pProj->GetBuildConfiguration();
CHECK_PTR_RET(bldConf);
wxString project = pProj->GetName();
wxString config = bldConf->GetName();
if(!DoGetData(project, config, bcpd)) {
event.Skip();
return;
}
if(bcpd.m_enabled) {
// This project/configuration is qmake project
QMakeProFileGenerator generator(m_mgr, project, config);
// Regenerate the .pro file
generator.Generate();
// run qmake
wxString qmake_exe = m_conf->Read(wxString::Format(wxT("%s/qmake"), bcpd.m_qmakeConfig.c_str()));
wxString qmakespec = m_conf->Read(wxString::Format(wxT("%s/qmakespec"), bcpd.m_qmakeConfig.c_str()));
wxString qtdir = m_conf->Read(wxString::Format(wxT("%s/qtdir"), bcpd.m_qmakeConfig.c_str()));
// Create qmake comand
wxString qmake_exe_line;
qmake_exe.Trim().Trim(false);
qmakespec.Trim().Trim(false);
// Set QTDIR
DirSaver ds;
{
wxString errMsg;
ProjectPtr p = m_mgr->GetWorkspace()->FindProjectByName(project, errMsg);
if(!p) { return; }
qmake_exe_line << wxT("\"") << qmake_exe << wxT("\" -spec ") << qmakespec << wxT(" ")
<< generator.GetProFileName();
wxStringMap_t om;
om.insert(std::make_pair("QTDIR", qtdir));
EnvSetter envGuard(NULL, &om, project, config);
m_mgr->ClearOutputTab(kOutputTab_Build);
m_mgr->AppendOutputTabText(kOutputTab_Build, wxString() << "-- " << qmake_exe_line << "\n");
m_qmakeProcess =
::CreateAsyncProcess(this, qmake_exe_line, IProcessCreateDefault, p->GetFileName().GetPath());
}
}
event.Skip();
}
NewProjectClientData(ProjectPtr project, const wxString & templateName = wxEmptyString)
: m_templateName(templateName)
{
m_project = project;
if (m_project && m_templateName.IsEmpty() ) {
// use the project name
m_templateName = m_project->GetName();
}
}
void
CMakeProjectMenu::OnCMakeListsOpen(wxCommandEvent& event)
{
wxUnusedVar(event);
ProjectPtr project = m_plugin->GetSelectedProject();
if (project)
m_plugin->OpenCMakeLists(m_plugin->GetProjectDirectory(project->GetName()));
}
BuildConfigPtr CMakePlugin::GetSelectedBuildConfig() const
{
const clCxxWorkspace* workspace = m_mgr->GetWorkspace();
wxASSERT(workspace);
const ProjectPtr projectPtr = GetSelectedProject();
wxASSERT(projectPtr);
return workspace->GetProjBuildConf(projectPtr->GetName(), wxEmptyString);
}
ProjectPtr clCxxWorkspace::DoAddProject(ProjectPtr proj)
{
if(!proj) {
return NULL;
}
m_projects.insert(std::make_pair(proj->GetName(), proj));
proj->AssociateToWorkspace(this);
return proj;
}
const CMakeProjectSettings* CMakePlugin::GetSelectedProjectSettings() const
{
const ProjectPtr projectPtr = GetSelectedProject();
wxASSERT(projectPtr);
const wxString project = projectPtr->GetName();
const wxString config = GetSelectedProjectConfig();
wxASSERT(m_settingsManager);
return m_settingsManager->GetProjectSettings(project, config);
}
bool clCxxWorkspace::AddProject(const wxString& path, wxString& errMsg)
{
if(!m_doc.IsOk()) {
errMsg = wxT("No workspace open");
return false;
}
wxFileName fn(path);
if(!fn.FileExists()) {
errMsg = wxT("File does not exist");
return false;
}
// Load the project into
ProjectPtr newProject(new Project());
if(!newProject->Load(path)) {
errMsg = wxT("Corrupted project file '");
errMsg << path << wxT("'");
return false;
}
// Try first to find a project with similar name in the workspace
ProjectPtr proj = FindProjectByName(newProject->GetName(), errMsg);
if(!proj) {
// No project could be find, add it to the workspace
DoAddProject(newProject);
// Add an entry to the workspace file
fn.MakeRelativeTo(m_fileName.GetPath());
wxXmlNode* node = new wxXmlNode(NULL, wxXML_ELEMENT_NODE, wxT("Project"));
node->AddProperty(wxT("Name"), fn.GetName());
node->AddProperty(wxT("Path"), fn.GetFullPath(wxPATH_UNIX));
node->AddProperty(wxT("Active"), m_projects.size() == 1 ? wxT("Yes") : wxT("No"));
m_doc.GetRoot()->AddChild(node);
if(!SaveXmlFile()) {
wxMessageBox(
_("Failed to save workspace file to disk. Please check that you have permission to write to disk"),
_("CodeLite"),
wxICON_ERROR | wxOK);
return false;
}
AddProjectToBuildMatrix(newProject);
return true;
} else {
errMsg = wxString::Format(wxT("A project with a similar name '%s' already exists in the workspace"),
proj->GetName().c_str());
return false;
}
}
NewProjectClientData(ProjectPtr project, const wxString& templateName = wxEmptyString, bool isPluginManaged = false,
bool canUseSeparateFolder = true)
: m_templateName(templateName)
, m_isPluginManaged(isPluginManaged)
, m_canUseSeparateFolder(canUseSeparateFolder)
{
m_project = project;
if(m_project && m_templateName.IsEmpty()) {
// use the project name
m_templateName = m_project->GetName();
}
}
//do the actual cleanup
void CleanRequest::Process(IManager *manager)
{
wxString cmd;
wxString errMsg;
wxStringMap_t om;
BuildSettingsConfig *bsc(manager ? manager->GetBuildSettingsConfigManager() : BuildSettingsConfigST::Get());
BuildManager * bm(manager ? manager->GetBuildManager() : BuildManagerST::Get());
Workspace * w(manager ? manager->GetWorkspace() : WorkspaceST::Get());
ProjectPtr proj = w->FindProjectByName(m_info.GetProject(), errMsg);
if (!proj) {
AppendLine(_("Cant find project: ") + m_info.GetProject());
return;
}
wxString pname (proj->GetName());
//BuilderPtr builder = bm->GetBuilder(wxT("GNU makefile for g++/gcc"));
BuilderPtr builder = bm->GetSelectedBuilder();
if (m_info.GetProjectOnly()) {
cmd = builder->GetPOCleanCommand(m_info.GetProject(), m_info.GetConfiguration());
} else {
cmd = builder->GetCleanCommand(m_info.GetProject(), m_info.GetConfiguration());
}
if ( cmd.IsEmpty() ) {
AppendLine(_("Sorry, there is no 'Clean' command available\n"));
return;
}
BuildConfigPtr bldConf = w->GetProjBuildConf(m_info.GetProject(), m_info.GetConfiguration());
if(bldConf) {
wxString cmpType = bldConf->GetCompilerType();
CompilerPtr cmp = bsc->GetCompiler(cmpType);
if(cmp) {
wxString value( cmp->GetPathVariable() );
if(value.Trim().Trim(false).IsEmpty() == false) {
wxLogMessage(wxString::Format(wxT("Setting PATH to '%s'"), value.c_str()));
om[wxT("PATH")] = value.Trim().Trim(false);
}
}
} else {
AppendLine(_("Sorry, couldn't find the Build configuration\n"));
return;
}
// Notify plugins that a compile process is going to start
clBuildEvent event(wxEVT_BUILD_STARTING);
event.SetProjectName( pname );
event.SetConfigurationName( m_info.GetConfiguration() );
if (EventNotifier::Get()->ProcessEvent(event)) {
// the build is being handled by some plugin, no need to build it
// using the standard way
return;
}
SendStartMsg();
// Expand the variables of the command
cmd = ExpandAllVariables(cmd, w, m_info.GetProject(), m_info.GetConfiguration(), wxEmptyString);
WrapInShell(cmd);
DirSaver ds;
DoSetWorkingDirectory(proj, false, false);
if (m_info.GetProjectOnly() ) {
//need to change directory to project dir
wxSetWorkingDirectory(proj->GetFileName().GetPath());
}
//print the build command
AppendLine(cmd + wxT("\n"));
// print the prefix message of the build start. This is important since the parser relies
// on this message
if(m_info.GetProjectOnly()) {
wxString configName(m_info.GetConfiguration());
//also, send another message to the main frame, indicating which project is being built
//and what configuration
wxString text;
text << wxGetTranslation(CLEAN_PROJECT_PREFIX) << m_info.GetProject() << wxT(" - ") << configName << wxT(" ]");
text << wxT("----------\n");
AppendLine(text);
}
//apply environment settings
EnvSetter env(NULL, &om, proj->GetName());
m_proc = CreateAsyncProcess(this, cmd);
if ( !m_proc ) {
//remove environment settings applied
wxString message;
message << _("Failed to start clean process, command: ") << cmd << _(", process terminated with exit code: 0");
AppendLine(message);
return;
}
}
void WorkspaceTab::OnProjectSettings(wxCommandEvent& e)
{
wxUnusedVar(e);
ProjectPtr proj = m_fileView->GetSelectedProject();
OpenProjectSettings(proj ? proj->GetName() : "");
}
void LLDBPlugin::OnDebugStart(clDebugEvent& event)
{
if(event.GetDebuggerName() != LLDB_DEBUGGER_NAME) {
event.Skip();
return;
}
CL_DEBUG("LLDB: Initial working directory is restored to: " + ::wxGetCwd());
{
// Get the executable to debug
wxString errMsg;
ProjectPtr pProject = clCxxWorkspaceST::Get()->FindProjectByName(event.GetProjectName(), errMsg);
if(!pProject) {
::wxMessageBox(wxString() << _("Could not locate project: ") << event.GetProjectName(), "LLDB Debugger",
wxICON_ERROR | wxOK | wxCENTER);
return;
}
DirSaver ds;
::wxSetWorkingDirectory(pProject->GetFileName().GetPath());
// Load LLDB settings
LLDBSettings settings;
settings.Load();
BuildConfigPtr bldConf = clCxxWorkspaceST::Get()->GetProjBuildConf(pProject->GetName(), wxEmptyString);
if(!bldConf) {
::wxMessageBox(wxString() << _("Could not locate the requested buid configuration"), "LLDB Debugger",
wxICON_ERROR | wxOK | wxCENTER);
return;
}
// Launch codelite-lldb now.
// Choose wether we need to debug a local or remote target
// Honour the project settings
if(bldConf->GetIsDbgRemoteTarget()) {
long nPort(wxNOT_FOUND);
bldConf->GetDbgHostPort().ToCLong(&nPort);
settings.SetProxyIp(bldConf->GetDbgHostName());
settings.SetProxyPort(nPort);
settings.EnableFlag(kLLDBOptionUseRemoteProxy, true);
}
if(!settings.IsUsingRemoteProxy()) {
// Not using a remote proxy, launch the debug server
if(!m_connector.LaunchLocalDebugServer(settings.GetDebugserver())) { return; }
}
// Determine the executable to debug, working directory and arguments
EnvSetter env(NULL, NULL, pProject ? pProject->GetName() : wxString(), bldConf->GetName());
wxString exepath = bldConf->GetCommand();
wxString args;
wxString workingDirectory;
// Get the debugging arguments.
if(bldConf->GetUseSeparateDebugArgs()) {
args = bldConf->GetDebugArgs();
} else {
args = bldConf->GetCommandArguments();
}
workingDirectory = ::ExpandVariables(bldConf->GetWorkingDirectory(), pProject, m_mgr->GetActiveEditor());
exepath = ::ExpandVariables(exepath, pProject, m_mgr->GetActiveEditor());
{
DirSaver ds;
::wxSetWorkingDirectory(workingDirectory);
wxFileName execToDebug(exepath);
if(execToDebug.IsRelative()) { execToDebug.MakeAbsolute(); }
//////////////////////////////////////////////////////////////////////
// Launch terminal for IO redirection
//////////////////////////////////////////////////////////////////////
TerminateTerminal();
bool isWindows = wxPlatformInfo::Get().GetOperatingSystemId() & wxOS_WINDOWS;
if(!bldConf->IsGUIProgram() && !isWindows) {
m_debuggerTerminal.Launch(clDebuggerTerminalPOSIX::MakeExeTitle(execToDebug.GetFullPath(), args));
if(m_debuggerTerminal.IsValid()) {
CL_DEBUG("Successfully launched terminal %s", m_debuggerTerminal.GetTty());
} else {
// Failed to launch it...
DoCleanup();
::wxMessageBox(_("Failed to start terminal for debugger"), "CodeLite",
wxICON_ERROR | wxOK | wxCENTER);
return;
}
}
if(!isWindows) { workingDirectory = ::wxGetCwd(); }
CL_DEBUG("LLDB: Using executable : " + execToDebug.GetFullPath());
CL_DEBUG("LLDB: Working directory: " + workingDirectory);
//////////////////////////////////////////////////////////////////////
// Initiate the connection to codelite-lldb
//////////////////////////////////////////////////////////////////////
LLDBConnectReturnObject retObj;
if(m_connector.Connect(retObj, settings, 5)) {
// Get list of breakpoints and add them ( we will apply them later on )
BreakpointInfo::Vec_t gdbBps;
m_mgr->GetAllBreakpoints(gdbBps);
// remove all breakpoints from previous session
m_connector.DeleteAllBreakpoints();
// apply the serialized breakpoints
m_connector.AddBreakpoints(gdbBps);
// Setup pivot folder if needed
SetupPivotFolder(retObj);
LLDBCommand startCommand;
startCommand.FillEnvFromMemory();
// If the current platform is Windows, use the executable as it appears in the project settings
startCommand.SetExecutable(isWindows ? exepath : execToDebug.GetFullPath());
startCommand.SetCommandArguments(args);
// Since we called 'wxSetWorkingDirectory' earlier, wxGetCwd() should give use the
// correct working directory for the debugger
startCommand.SetWorkingDirectory(workingDirectory);
startCommand.SetRedirectTTY(m_debuggerTerminal.GetTty());
m_connector.Start(startCommand);
clDebugEvent cl_event(wxEVT_DEBUG_STARTED);
EventNotifier::Get()->AddPendingEvent(cl_event);
} else {
// Failed to connect, notify and perform cleanup
DoCleanup();
wxString message;
message << _("Could not connect to codelite-lldb at '")
<< (settings.IsUsingRemoteProxy() ? settings.GetTcpConnectString()
: m_connector.GetConnectString())
<< "'";
::wxMessageBox(message, "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
return;
}
}
}
CL_DEBUG("LLDB: Working directory is restored to: " + ::wxGetCwd());
}
wxArrayString PluginManager::GetProjectCompileFlags(const wxString& projectName, bool isCppFile)
{
if(IsWorkspaceOpen() == false) return wxArrayString();
wxArrayString args;
// Next apppend the user include paths
wxString errMsg;
// First, we need to find the currently active workspace configuration
BuildMatrixPtr matrix = GetWorkspace()->GetBuildMatrix();
if(!matrix) {
return wxArrayString();
}
wxString workspaceSelConf = matrix->GetSelectedConfigurationName();
// Now that we got the selected workspace configuration, extract the related project configuration
ProjectPtr proj = GetWorkspace()->FindProjectByName(projectName, errMsg);
if(!proj) {
return args;
}
wxString projectSelConf = matrix->GetProjectSelectedConf(workspaceSelConf, proj->GetName());
BuildConfigPtr dependProjbldConf = GetWorkspace()->GetProjBuildConf(proj->GetName(), projectSelConf);
if(dependProjbldConf && dependProjbldConf->IsCustomBuild() == false) {
// Get the include paths and add them
wxString projectIncludePaths = dependProjbldConf->GetIncludePath();
wxArrayString projectIncludePathsArr = wxStringTokenize(projectIncludePaths, wxT(";"), wxTOKEN_STRTOK);
for(size_t i = 0; i < projectIncludePathsArr.GetCount(); i++) {
args.Add(wxString::Format(wxT("-I%s"), projectIncludePathsArr[i].c_str()));
}
// get the compiler options and add them
wxString projectCompileOptions = dependProjbldConf->GetCompileOptions();
wxArrayString projectCompileOptionsArr = wxStringTokenize(projectCompileOptions, wxT(";"), wxTOKEN_STRTOK);
for(size_t i = 0; i < projectCompileOptionsArr.GetCount(); i++) {
wxString cmpOption(projectCompileOptionsArr.Item(i));
cmpOption.Trim().Trim(false);
wxString tmp;
// Expand backticks / $(shell ...) syntax supported by codelite
if(cmpOption.StartsWith(wxT("$(shell "), &tmp) || cmpOption.StartsWith(wxT("`"), &tmp)) {
cmpOption = tmp;
tmp.Clear();
if(cmpOption.EndsWith(wxT(")"), &tmp) || cmpOption.EndsWith(wxT("`"), &tmp)) {
cmpOption = tmp;
}
if(m_backticks.find(cmpOption) == m_backticks.end()) {
// Expand the backticks into their value
wxArrayString outArr;
// Apply the environment before executing the command
EnvSetter setter(EnvironmentConfig::Instance(), NULL, projectName);
ProcUtils::SafeExecuteCommand(cmpOption, outArr);
wxString expandedValue;
for(size_t j = 0; j < outArr.size(); j++) {
expandedValue << outArr.Item(j) << wxT(" ");
}
m_backticks[cmpOption] = expandedValue;
cmpOption = expandedValue;
} else {
cmpOption = m_backticks.find(cmpOption)->second;
}
}
args.Add(cmpOption);
}
// get the compiler preprocessor and add them as well
wxString projectPreps = dependProjbldConf->GetPreprocessor();
wxArrayString projectPrepsArr = wxStringTokenize(projectPreps, wxT(";"), wxTOKEN_STRTOK);
for(size_t i = 0; i < projectPrepsArr.GetCount(); i++) {
args.Add(wxString::Format(wxT("-D%s"), projectPrepsArr[i].c_str()));
}
}
return args;
}
void NewProjectWizard::OnPageChanging(wxWizardEvent& event)
{
if(event.GetDirection()) {
wxDataViewItem sel = m_dataviewTemplates->GetSelection();
NewProjectClientData* cd = dynamic_cast<NewProjectClientData*>(m_dataviewTemplatesModel->GetClientObject(sel));
if(event.GetPage() == m_wizardPageTemplate) {
// -------------------------------------------------------
// Switching from the Templates page
// -------------------------------------------------------
if(!CheckProjectTemplate()) {
event.Veto();
return;
}
// Test to see if the selected project allows enabling the 'Create under separate folder'
if(cd && !cd->IsCanUseSeparateFolder()) {
m_cbSeparateDir->SetValue(false);
m_cbSeparateDir->Enable(false);
} else {
m_cbSeparateDir->Enable(true);
}
m_txtProjName->SetFocus(); // This should have happened in the base-class ctor, but in practice it doesn't
} else if(event.GetPage() == m_wizardPageDetails) {
// -------------------------------------------------------
// Switching from the Name/Path page
// -------------------------------------------------------
if(!CheckProjectName() || !CheckProjectPath()) {
event.Veto();
return;
}
} else if(event.GetPage() == m_wizardPageToolchain) {
wxFileName fn(m_stxtFullFileName->GetLabel());
// make sure that there is no conflict in files between the template project and the selected path
if(m_projectData.m_srcProject) {
ProjectPtr p = m_projectData.m_srcProject;
wxString base_dir(fn.GetPath());
std::vector<wxFileName> files;
p->GetFiles(files);
for(size_t i = 0; i < files.size(); ++i) {
wxFileName f = files.at(i);
wxString new_file = base_dir + wxT("/") + f.GetFullName();
if(wxFileName::FileExists(new_file)) {
// this file already - notify the user
wxString msg;
msg << _("The File '") << f.GetFullName() << _("' already exists at the target directory '")
<< base_dir << wxT("'\n");
msg << _("Please select a different project path\n");
msg << _("The file '") << f.GetFullName() << _("' is part of the template project [")
<< p->GetName() << wxT("]");
wxMessageBox(msg, _("CodeLite"), wxOK | wxICON_HAND);
event.Veto();
return;
}
}
}
}
}
event.Skip();
}
void MacBundler::showSettingsDialogFor(ProjectPtr project)
{
// project->GetSettings()->GetGlobalSettings();
// project->GetSettings()->GetBuildConfiguration(name);
ProjectSettingsCookie cookie;
ProjectSettingsPtr settings = project->GetSettings();
if(not settings) {
wxMessageBox(_("Cannot continue, impossible to access project settings."));
return;
}
std::map<wxString, BuildConfigPtr> configs;
wxArrayString choices;
// TODO: allow putting the rules in the config root and not in every target
BuildConfigPtr buildConfig = settings->GetFirstBuildConfiguration(cookie);
while(buildConfig) {
configs[buildConfig->GetName()] = buildConfig;
choices.Add(buildConfig->GetName());
buildConfig = settings->GetNextBuildConfiguration(cookie);
}
bool accepted = false;
bool generateInfoPlistFile = false;
bool generateIcon = false;
wxArrayString targetsToSet;
wxString iconName(wxT("icon.icns"));
{
BundleConfigDialog configDlg(project, m_mgr->GetTheApp()->GetTopWindow(), choices, m_mgr);
configDlg.ShowModal();
accepted = configDlg.getResults(targetsToSet, &generateInfoPlistFile, &generateIcon);
iconName = configDlg.getIconDestName();
if(accepted and generateInfoPlistFile) {
wxFileName projPath = project->GetFileName();
projPath.SetFullName(wxT(""));
const wxString projectDirName = projPath.GetFullPath();
const wxString infoPlistFile = projectDirName + wxT("/Info.plist");
if(wxFileExists(infoPlistFile)) {
int out = wxMessageBox(wxString::Format(_("The following file:\n%s\nalready exists, overwrite it?\n"),
infoPlistFile.c_str()),
_("Warning"),
wxYES_NO);
if(out == wxYES) {
wxTextFile file;
file.Open(infoPlistFile);
file.Clear();
configDlg.writeInfoPlistFile(file);
file.Close();
}
} else {
wxTextFile file;
if(not file.Create(infoPlistFile)) {
wxMessageBox(_("Could not create Info.plist file\n") + infoPlistFile);
} else {
configDlg.writeInfoPlistFile(file);
file.Close();
}
}
if(wxFileExists(infoPlistFile)) {
// FIXME: if the file was already present, it will be added again and appear twice in the file tree
wxArrayString paths;
paths.Add(infoPlistFile);
m_mgr->CreateVirtualDirectory(project->GetName(), wxT("osx"));
m_mgr->AddFilesToVirtualFolder(project->GetName() + wxT(":osx"), paths);
}
} // nend if create info.plist
if(accepted and generateIcon) {
wxString iconSourcePath = configDlg.getIconSource();
if(not iconSourcePath.IsEmpty()) {
// sips doesn't like double slashes in path names
iconSourcePath.Replace(wxT("//"), wxT("/"));
wxFileName projPath = project->GetFileName();
projPath.SetFullName(wxT(""));
const wxString projectDirName = projPath.GetFullPath();
wxString iconFileDest = projectDirName + wxT("/") + configDlg.getIconDestName();
// sips doesn't like double slashes in path names
iconFileDest.Replace(wxT("//"), wxT("/"));
std::cout << "Copying icon '" << iconSourcePath.mb_str() << "' to project\n";
if(iconSourcePath.EndsWith(wxT(".icns"))) {
if(not wxCopyFile(iconSourcePath, iconFileDest)) {
wxMessageBox(_("Sorry, could not copy icon"));
}
} else {
wxString cmd =
wxT("sips -s format icns '") + iconSourcePath + wxT("' --out '") + iconFileDest + wxT("'");
std::cout << cmd.mb_str() << std::endl;
wxExecute(cmd, wxEXEC_SYNC);
if(not wxFileExists(iconFileDest)) {
wxMessageBox(_("Sorry, could not convert selected icon to icns format"));
}
}
// FIXME: if the file was already present, it will be added again and appear twice in the file tree
if(wxFileExists(iconFileDest)) {
wxArrayString paths;
paths.Add(iconFileDest);
m_mgr->CreateVirtualDirectory(project->GetName(), wxT("osx"));
m_mgr->AddFilesToVirtualFolder(project->GetName() + wxT(":osx"), paths);
}
} // end if icon not null
} // end if generate icon
}
if(!accepted) return;
for(int n = 0; n < targetsToSet.GetCount(); n++) {
BuildConfigPtr buildConfig = configs[targetsToSet[n]];
wxString outputFileName = buildConfig->GetOutputFileName();
wxString output = wxT("$(ProjectName).app/Contents/MacOS/$(ProjectName)");
buildConfig->SetOutputFileName(wxT("$(IntermediateDirectory)/") + output);
buildConfig->SetCommand(wxT("./") + output);
if(generateInfoPlistFile or generateIcon) {
// get existing custom makefile targets, if any
wxString customPreBuild = buildConfig->GetPreBuildCustom();
wxString deps, rules;
deps = customPreBuild.BeforeFirst(wxT('\n'));
rules = customPreBuild.AfterFirst(wxT('\n'));
rules = rules.Trim();
rules = rules.Trim(false);
deps = deps.Trim();
deps = deps.Trim(false);
if(generateInfoPlistFile) {
// augment existing rules with new rules to manage Info.plist file
deps.Append(wxT(" $(IntermediateDirectory)/$(ProjectName).app/Contents/Info.plist"));
rules.Append(wxString(wxT("\n## rule to copy the Info.plist file into the bundle\n")) +
wxT("$(IntermediateDirectory)/$(ProjectName).app/Contents/Info.plist: Info.plist\n") +
wxT("\tmkdir -p '$(IntermediateDirectory)/$(ProjectName).app/Contents' && cp -f "
"Info.plist '$(IntermediateDirectory)/$(ProjectName).app/Contents/Info.plist'"));
}
if(generateIcon) {
// augment existing rules with new rules to manage Info.plist file
deps.Append(wxT(" $(IntermediateDirectory)/$(ProjectName).app/Contents/Resources/") + iconName);
rules.Append(
wxT("\n## rule to copy the icon file into the "
"bundle\n$(IntermediateDirectory)/$(ProjectName).app/Contents/Resources/") +
iconName + wxT(": ") + iconName +
wxT("\n\tmkdir -p '$(IntermediateDirectory)/$(ProjectName).app/Contents/Resources/' && cp -f ") +
iconName + wxT(" '$(IntermediateDirectory)/$(ProjectName).app/Contents/Resources/") + iconName +
wxT("'"));
}
// set the new rules
rules = rules.Trim();
rules = rules.Trim(false);
deps = deps.Trim();
deps = deps.Trim(false);
wxString prebuilstep;
prebuilstep << deps << wxT("\n");
prebuilstep << rules;
prebuilstep << wxT("\n");
// Set the content only if there is real content to add
wxString tmpPreBuildStep(prebuilstep);
tmpPreBuildStep.Trim().Trim(false);
buildConfig->SetPreBuildCustom(prebuilstep);
} // end if
settings->SetBuildConfiguration(buildConfig);
} // end for
project->SetSettings(settings);
}
void NewProjectWizard::OnFinish(wxWizardEvent& event)
{
wxFileName fn( m_stxtFullFileName->GetLabel() );
// Ensure that the target folder exists
fn.Mkdir(wxS_DIR_DEFAULT, wxPATH_MKDIR_FULL);
// make sure that there is no conflict in files between the template project and the selected path
if (m_projectData.m_srcProject) {
ProjectPtr p = m_projectData.m_srcProject;
wxString base_dir( fn.GetPath() );
std::vector<wxFileName> files;
p->GetFiles(files);
for (size_t i=0; i<files.size(); ++i) {
wxFileName f = files.at(i);
wxString new_file = base_dir + wxT("/") + f.GetFullName();
if ( wxFileName::FileExists(new_file) ) {
// this file already - notify the user
wxString msg;
msg << _("The File '") << f.GetFullName() << _("' already exists at the target directory '") << base_dir << wxT("'\n");
msg << _("Please select a different project path\n");
msg << _("The file '") << f.GetFullName() << _("' is part of the template project [") << p->GetName() << wxT("]");
wxMessageBox(msg, _("CodeLite"), wxOK|wxICON_HAND);
event.Veto();
return;
}
}
}
m_projectData.m_name = m_txtProjName->GetValue();
m_projectData.m_path = fn.GetPath();
m_projectData.m_cmpType = m_choiceCompiler->GetStringSelection();
m_projectData.m_debuggerType = m_choiceDebugger->GetStringSelection();
event.Skip();
}
bool clCxxWorkspace::RemoveProject(const wxString& name, wxString& errMsg)
{
ProjectPtr proj = FindProjectByName(name, errMsg);
if(!proj) {
return false;
}
// remove the associated build configuration with this
// project
RemoveProjectFromBuildMatrix(proj);
// remove the project from the internal map
std::map<wxString, ProjectPtr>::iterator iter = m_projects.find(proj->GetName());
if(iter != m_projects.end()) {
m_projects.erase(iter);
}
// update the xml file
wxXmlNode* root = m_doc.GetRoot();
wxXmlNode* child = root->GetChildren();
while(child) {
if(child->GetName() == wxT("Project") && child->GetPropVal(wxT("Name"), wxEmptyString) == name) {
if(child->GetPropVal(wxT("Active"), wxEmptyString).CmpNoCase(wxT("Yes")) == 0) {
// the removed project was active,
// select new project to be active
if(!m_projects.empty()) {
std::map<wxString, ProjectPtr>::iterator iter = m_projects.begin();
SetActiveProject(iter->first, true);
}
}
root->RemoveChild(child);
delete child;
break;
}
child = child->GetNext();
}
// go over the dependencies list of each project and remove the project
iter = m_projects.begin();
for(; iter != m_projects.end(); iter++) {
ProjectPtr p = iter->second;
if(p) {
wxArrayString configs;
// populate the choice control with the list of available configurations for this project
ProjectSettingsPtr settings = p->GetSettings();
if(settings) {
ProjectSettingsCookie cookie;
BuildConfigPtr bldConf = settings->GetFirstBuildConfiguration(cookie);
while(bldConf) {
configs.Add(bldConf->GetName());
bldConf = settings->GetNextBuildConfiguration(cookie);
}
}
// update each configuration of this project
for(size_t i = 0; i < configs.GetCount(); i++) {
wxArrayString deps = p->GetDependencies(configs.Item(i));
int where = deps.Index(name);
if(where != wxNOT_FOUND) {
deps.RemoveAt((size_t)where);
}
// update the configuration
p->SetDependencies(deps, configs.Item(i));
}
}
}
return SaveXmlFile();
}
BundleConfigDialog(ProjectPtr project, wxWindow* parent, const wxArrayString& choices, IManager* manager)
: wxDialog(parent,
wxID_ANY,
_("Mac Bundler Configuration"),
wxDefaultPosition,
wxDefaultSize,
wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER)
, m_pluginManager(manager)
{
m_accepted = false;
m_project_name = project->GetName();
wxStaticText* titleLabel = new wxStaticText(this, wxID_ANY, _("Choose which target(s) to \"bundle-ize\""));
m_choices_widget = new wxCheckListBox(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, choices);
m_info_plist_cb = new wxCheckBox(this, wxID_ANY, _("Generate Info.plist file"));
m_get_info_string = new wxTextCtrl(this, wxID_ANY, m_project_name + wxT(", version 1.0, copyright myself"));
m_version = new wxTextCtrl(this, wxID_ANY, wxT("1.0"));
m_icon_file = new wxTextCtrl(this, wxID_ANY, m_project_name + wxT(".icns"));
m_identifier = new wxTextCtrl(this, wxID_ANY, wxT("com.mycompany.") + m_project_name.Lower());
m_signature = new wxTextCtrl(this, wxID_ANY, (m_project_name + wxT("????")).Left(4).Upper());
m_icon_cb = new wxCheckBox(this, wxID_ANY, _("Copy the following icon into the project"));
wxStaticText* warning =
new wxStaticText(this, wxID_ANY, _("Warning : applying these changes cannot be undone automatically"));
wxButton* okBtn = new wxButton(this, wxID_OK, _("Apply changes"));
wxButton* cancelBtn = new wxButton(this, wxID_CANCEL, _("Cancel"));
okBtn->SetDefault();
m_signature->SetMaxLength(4);
m_info_plist_cb->SetValue(true);
m_icon_cb->SetValue(true);
wxBoxSizer* sizer = new wxBoxSizer(wxVERTICAL);
wxBoxSizer* subsizer = new wxBoxSizer(wxHORIZONTAL);
wxFlexGridSizer* plistSizer = new wxFlexGridSizer(5, 2, 5, 5);
plistSizer->AddGrowableCol(1, 1);
plistSizer->Add(new wxStaticText(this, wxID_ANY, _("Get Info Version String")), 0, wxALIGN_RIGHT);
plistSizer->Add(m_get_info_string, 1, wxEXPAND);
plistSizer->Add(new wxStaticText(this, wxID_ANY, _("Version Number")), 0, wxALIGN_RIGHT);
plistSizer->Add(m_version, 1, wxEXPAND);
plistSizer->Add(new wxStaticText(this, wxID_ANY, _("Icon File")), 0, wxALIGN_RIGHT);
plistSizer->Add(m_icon_file, 1, wxEXPAND);
plistSizer->Add(new wxStaticText(this, wxID_ANY, _("Bundle Identifier")), 0, wxALIGN_RIGHT);
plistSizer->Add(m_identifier, 1, wxEXPAND);
plistSizer->Add(new wxStaticText(this, wxID_ANY, _("4-Character Signature")), 0, wxALIGN_RIGHT);
plistSizer->Add(m_signature, 1, wxEXPAND);
sizer->Add(titleLabel, 0, wxEXPAND | wxALL, 10);
sizer->Add(m_choices_widget, 1, wxEXPAND | wxALL, 10);
sizer->Add(m_info_plist_cb, 0, wxEXPAND | wxALL, 5);
sizer->Add(plistSizer, 1, wxEXPAND | wxALL, 5);
sizer->Add(m_icon_cb, 0, wxALL, 10);
wxStaticBoxSizer* iconBox = new wxStaticBoxSizer(wxHORIZONTAL, this);
m_icon_picker = new IconPicker(this);
m_icon_picker->setImage(
wxT("/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/GenericApplicationIcon.icns"));
iconBox->Add(m_icon_picker, 1, wxEXPAND);
sizer->Add(iconBox, 0, wxALL, 10);
sizer->Add(warning, 0, wxEXPAND | wxALL, 10);
subsizer->AddStretchSpacer();
subsizer->Add(cancelBtn, 0, wxLEFT | wxRIGHT, 5);
subsizer->Add(okBtn, 0, wxLEFT | wxRIGHT, 5);
sizer->Add(subsizer, 0, wxEXPAND | wxALL, 10);
okBtn->Connect(
okBtn->GetId(), wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(BundleConfigDialog::onOk), NULL, this);
cancelBtn->Connect(cancelBtn->GetId(),
wxEVT_COMMAND_BUTTON_CLICKED,
wxCommandEventHandler(BundleConfigDialog::onCancel),
NULL,
this);
m_info_plist_cb->Connect(m_info_plist_cb->GetId(),
wxEVT_COMMAND_CHECKBOX_CLICKED,
wxCommandEventHandler(BundleConfigDialog::onPlistCheckboxPressed),
NULL,
this);
this->SetSizerAndFit(sizer);
this->Centre();
// Load last stored size & position from the configuration tool
SetName("BundleConfigDialog");
WindowAttrManager::Load(this);
}
bool CustomBuildRequest::DoUpdateCommand(IManager* manager,
wxString& cmd,
ProjectPtr proj,
BuildConfigPtr bldConf,
bool isClean)
{
BuildCommandList preBuildCmds, postBuildCmds;
wxArrayString pre, post;
bldConf->GetPreBuildCommands(preBuildCmds);
bldConf->GetPostBuildCommands(postBuildCmds);
// collect all enabled commands
BuildCommandList::iterator iter = preBuildCmds.begin();
for(; iter != preBuildCmds.end(); iter++) {
BuildCommand command = *iter;
if(command.GetEnabled()) {
pre.Add(command.GetCommand());
}
}
iter = postBuildCmds.begin();
for(; iter != postBuildCmds.end(); iter++) {
BuildCommand command = *iter;
if(command.GetEnabled()) {
post.Add(command.GetCommand());
}
}
if(pre.empty() && post.empty()) {
return false;
}
// we need to create a makefile which includes all the pre-build, the actual build command and the post-build
// commands
// (in this exact order).
wxString script;
script << ECHO_OFF << wxT("\n");
if(pre.IsEmpty() == false && !isClean) {
script << ECHO_CMD << wxT("Executing Pre Build commands ...\n");
for(size_t i = 0; i < pre.GetCount(); i++) {
script << SILENCE_OP << pre.Item(i) << wxT("\n");
}
script << ECHO_CMD << wxT("Done\n");
}
// add the command
script << cmd << wxT("\n");
if(post.IsEmpty() == false && !isClean) {
script << ECHO_CMD << wxT("Executing Post Build commands ...\n");
for(size_t i = 0; i < post.GetCount(); i++) {
script << SILENCE_OP << post.Item(i) << wxT("\n");
}
script << ECHO_CMD << wxT("Done\n");
}
// write the makefile
wxFFile output;
wxString fn;
fn << proj->GetName() << SCRIPT_EXT;
output.Open(fn, wxT("w+"));
if(output.IsOpened()) {
output.Write(script);
output.Close();
}
cmd.Clear();
#ifdef __WXMSW__
cmd << wxT("\"") << fn << wxT("\"");
#else
// *nix
cmd << wxT("/bin/sh './") << fn << wxT("'");
#endif
return true;
}
// do the actual cleanup
void CompileRequest::Process(IManager* manager)
{
wxString cmd;
wxString errMsg;
wxStringMap_t om;
BuildSettingsConfig* bsc(manager ? manager->GetBuildSettingsConfigManager() : BuildSettingsConfigST::Get());
BuildManager* bm(manager ? manager->GetBuildManager() : BuildManagerST::Get());
clCxxWorkspace* w(manager ? manager->GetWorkspace() : clCxxWorkspaceST::Get());
EnvironmentConfig* env(manager ? manager->GetEnv() : EnvironmentConfig::Instance());
ProjectPtr proj = w->FindProjectByName(m_info.GetProject(), errMsg);
if(!proj) {
AppendLine(_("Cant find project: ") + m_info.GetProject());
return;
}
wxString pname(proj->GetName());
// BuilderPtr builder = bm->GetBuilder(wxT("GNU makefile for g++/gcc"));
BuilderPtr builder = bm->GetSelectedBuilder();
if(m_fileName.IsEmpty() == false) {
// we got a complie request of a single file
cmd = m_preprocessOnly ?
builder->GetPreprocessFileCmd(m_info.GetProject(), m_info.GetConfiguration(), m_fileName, errMsg) :
builder->GetSingleFileCmd(m_info.GetProject(), m_info.GetConfiguration(), m_fileName);
} else if(m_info.GetProjectOnly()) {
switch(m_info.GetKind()) {
case QueueCommand::kRebuild:
cmd = builder->GetPORebuildCommand(m_info.GetProject(), m_info.GetConfiguration());
break;
default:
case QueueCommand::kBuild:
cmd = builder->GetPOBuildCommand(m_info.GetProject(), m_info.GetConfiguration());
break;
}
} else {
cmd = builder->GetBuildCommand(m_info.GetProject(), m_info.GetConfiguration());
}
// Notify plugins that a compile process is going to start
clBuildEvent event(wxEVT_BUILD_STARTING);
event.SetProjectName(pname);
event.SetConfigurationName(m_info.GetConfiguration());
if(EventNotifier::Get()->ProcessEvent(event)) {
// the build is being handled by some plugin, no need to build it
// using the standard way
return;
}
// Send the EVENT_STARTED : even if this event is sent, next event will
// be post, so no way to be sure the the build process has not started
SendStartMsg();
// if we require to run the makefile generation command only, replace the 'cmd' with the
// generation command line
BuildConfigPtr bldConf = w->GetProjBuildConf(m_info.GetProject(), m_info.GetConfiguration());
if(m_premakeOnly && bldConf) {
BuildConfigPtr bldConf = w->GetProjBuildConf(m_info.GetProject(), m_info.GetConfiguration());
if(bldConf) {
cmd = bldConf->GetMakeGenerationCommand();
}
}
if(bldConf) {
wxString cmpType = bldConf->GetCompilerType();
CompilerPtr cmp = bsc->GetCompiler(cmpType);
if(cmp) {
// Add the 'bin' folder of the compiler to the PATH environment variable
wxString scxx = cmp->GetTool("CXX");
scxx.Trim().Trim(false);
scxx.StartsWith("\"", &scxx);
scxx.EndsWith("\"", &scxx);
// Strip the double quotes
wxFileName cxx(scxx);
wxString pathvar;
pathvar << cxx.GetPath() << clPATH_SEPARATOR;
// If we have an additional path, add it as well
if(!cmp->GetPathVariable().IsEmpty()) {
pathvar << cmp->GetPathVariable() << clPATH_SEPARATOR;
}
pathvar << "$PATH";
om["PATH"] = pathvar;
}
}
if(cmd.IsEmpty()) {
// if we got an error string, use it
if(errMsg.IsEmpty() == false) {
AppendLine(errMsg);
} else {
AppendLine(_("Command line is empty. Build aborted."));
}
return;
}
WrapInShell(cmd);
DirSaver ds;
DoSetWorkingDirectory(proj, false, m_fileName.IsEmpty() == false);
// expand the variables of the command
cmd = ExpandAllVariables(cmd, w, m_info.GetProject(), m_info.GetConfiguration(), m_fileName);
// print the build command
AppendLine(cmd + wxT("\n"));
if(m_info.GetProjectOnly() || m_fileName.IsEmpty() == false) {
// set working directory
DoSetWorkingDirectory(proj, false, m_fileName.IsEmpty() == false);
}
// print the prefix message of the build start. This is important since the parser relies
// on this message
if(m_info.GetProjectOnly() || m_fileName.IsEmpty() == false) {
wxString configName(m_info.GetConfiguration());
// also, send another message to the main frame, indicating which project is being built
// and what configuration
wxString text;
text << wxGetTranslation(BUILD_PROJECT_PREFIX) << m_info.GetProject() << wxT(" - ") << configName << wxT(" ]");
if(m_fileName.IsEmpty()) {
text << wxT("----------\n");
} else if(m_preprocessOnly) {
text << wxT(" (Preprocess Single File)----------\n");
} else {
text << wxT(" (Single File Build)----------\n");
}
AppendLine(text);
}
EnvSetter envir(env, &om, proj->GetName());
m_proc = CreateAsyncProcess(this, cmd);
if(!m_proc) {
wxString message;
message << _("Failed to start build process, command: ") << cmd << _(", process terminated with exit code: 0");
AppendLine(message);
return;
}
}
void CustomBuildRequest::Process(IManager* manager)
{
wxString cmd;
wxString errMsg;
wxStringMap_t om;
clCxxWorkspace* w(manager->GetWorkspace());
EnvironmentConfig* env(manager->GetEnv());
ProjectPtr proj = w->FindProjectByName(m_info.GetProject(), errMsg);
if(!proj) {
AppendLine(_("Cant find project: ") + m_info.GetProject());
return;
}
// Notify plugins that a compile process is going to start
clBuildEvent event(wxEVT_BUILD_STARTING);
event.SetProjectName(proj->GetName());
event.SetConfigurationName(m_info.GetConfiguration());
if(EventNotifier::Get()->ProcessEvent(event)) {
// the build is being handled by some plugin, no need to build it
// using the standard way
return;
}
SendStartMsg();
BuildConfigPtr bldConf = w->GetProjBuildConf(m_info.GetProject(), m_info.GetConfiguration());
if(!bldConf) {
wxLogMessage(wxString::Format(wxT("Failed to find build configuration for project '%s' and configuration '%s'"),
m_info.GetProject().c_str(),
m_info.GetConfiguration().c_str()));
return;
}
// try the special targets first:
bool isClean(false);
if(m_info.GetCustomBuildTarget() == wxT("Build")) {
cmd = bldConf->GetCustomBuildCmd();
} else if(m_info.GetCustomBuildTarget() == wxT("Clean")) {
cmd = bldConf->GetCustomCleanCmd();
isClean = true;
} else if(m_info.GetCustomBuildTarget() == wxT("Rebuild")) {
cmd = bldConf->GetCustomRebuildCmd();
} else if(m_info.GetCustomBuildTarget() == wxT("Compile Single File")) {
cmd = bldConf->GetSingleFileBuildCommand();
} else if(m_info.GetCustomBuildTarget() == wxT("Preprocess File")) {
cmd = bldConf->GetPreprocessFileCommand();
}
// if still no luck, try with the other custom targets
if(cmd.IsEmpty()) {
std::map<wxString, wxString> targets = bldConf->GetCustomTargets();
std::map<wxString, wxString>::iterator iter = targets.find(m_info.GetCustomBuildTarget());
if(iter != targets.end()) {
cmd = iter->second;
}
}
if(cmd.IsEmpty()) {
// if we got an error string, use it
if(errMsg.IsEmpty() == false) {
AppendLine(errMsg);
} else {
AppendLine(_("Command line is empty. Build aborted."));
}
return;
}
// Working directory:
// By default we use the project path
//////////////////////////////////////////////////////
DirSaver ds;
// first set the path to the project working directory
::wxSetWorkingDirectory(proj->GetFileName().GetPath());
// If a working directory was specified, use it instead
wxString wd = bldConf->GetCustomBuildWorkingDir();
wd.Trim().Trim(false);
wxString filename;
if(manager->GetActiveEditor()) {
filename = manager->GetActiveEditor()->GetFileName().GetFullPath();
}
if(wd.IsEmpty()) {
// use the project path
wd = proj->GetFileName().GetPath();
} else {
// expand macros from the working directory
wd = ExpandAllVariables(wd, clCxxWorkspaceST::Get(), proj->GetName(), bldConf->GetName(), filename);
}
{
// Ensure that the path to the working directory exist
wxFileName fnwd(wd, "");
if(!fnwd.DirExists()) {
fnwd.Mkdir(wxS_DIR_DEFAULT, wxPATH_MKDIR_FULL);
}
}
::wxSetWorkingDirectory(wd);
// Print message to the build tab
AppendLine(wxString::Format(_("MESSAGE: Entering directory `%s'\n"), wd.c_str()));
// Command handling:
//////////////////////////////////////////////////////
// expand the variables of the command
cmd = ExpandAllVariables(cmd, w, m_info.GetProject(), m_info.GetConfiguration(), filename);
// in case our configuration includes post/pre build commands
// we generate a makefile to include them as well and we update
// the build command
bool bCommandAltered = DoUpdateCommand(manager, cmd, proj, bldConf, isClean);
#ifdef __WXMSW__
// Windows CD command requires the paths to be backslashe
if(cmd.Find(wxT("cd ")) != wxNOT_FOUND) cmd.Replace(wxT("/"), wxT("\\"));
#endif
// Wrap the build command in the shell, so it will be able
// to perform 'chain' commands like
// cd SOMEWHERE && make && ...
// Dont wrap the command if it was altered previously
if(!bCommandAltered) {
WrapInShell(cmd);
}
// print the build command
AppendLine(cmd + wxT("\n"));
wxString configName(m_info.GetConfiguration());
// also, send another message to the main frame, indicating which project is being built
// and what configuration
wxString text;
if(isClean) {
text << wxGetTranslation(CLEAN_PROJECT_PREFIX);
} else {
text << wxGetTranslation(BUILD_PROJECT_PREFIX);
}
text << m_info.GetProject() << wxT(" - ") << configName << wxT(" ]----------\n");
AppendLine(text);
// Avoid Unicode chars coming from the compiler by setting LC_ALL to "C"
om["LC_ALL"] = "C";
EnvSetter environment(env, &om, proj->GetName());
m_proc = CreateAsyncProcess(this, cmd);
if(!m_proc) {
wxString message;
message << _("Failed to start build process, command: ") << cmd << _(", process terminated with exit code: 0");
AppendLine(message);
return;
}
}
