static IntRect ellipsisRectForBox(const InlineTextBox& box, unsigned start, unsigned end)
{
unsigned truncation = box.truncation();
if (truncation == cNoTruncation)
return IntRect();
auto ellipsis = box.root().ellipsisBox();
if (!ellipsis)
return IntRect();
IntRect rect;
unsigned ellipsisStartPosition = start > box.start() ? start - box.start() : 0;
ASSERT(end >= box.start());
unsigned ellipsisEndPosition = std::min(end - box.start(), box.len());
// The ellipsis should be considered to be selected if the end of
// the selection is past the beginning of the truncation and the
// beginning of the selection is before or at the beginning of the truncation.
if (ellipsisEndPosition < truncation && ellipsisStartPosition > truncation)
return IntRect();
return ellipsis->selectionRect();
}
void LineBoxList::dirtyLinesFromChangedChild(LayoutObject* container, LayoutObject* child)
{
if (!container->parent() || (container->isLayoutBlock() && (container->selfNeedsLayout() || !container->isLayoutBlockFlow())))
return;
LayoutInline* inlineContainer = container->isLayoutInline() ? toLayoutInline(container) : 0;
InlineBox* firstBox = inlineContainer ? inlineContainer->firstLineBoxIncludingCulling() : firstLineBox();
// If we have no first line box, then just bail early.
if (!firstBox) {
// For an empty inline, go ahead and propagate the check up to our parent, unless the parent
// is already dirty.
if (container->isInline() && !container->ancestorLineBoxDirty()) {
container->parent()->dirtyLinesFromChangedChild(container);
container->setAncestorLineBoxDirty(); // Mark the container to avoid dirtying the same lines again across multiple destroy() calls of the same subtree.
}
return;
}
// Try to figure out which line box we belong in. First try to find a previous
// line box by examining our siblings. If we didn't find a line box, then use our
// parent's first line box.
RootInlineBox* box = 0;
LayoutObject* curr = 0;
ListHashSet<LayoutObject*, 16> potentialLineBreakObjects;
potentialLineBreakObjects.add(child);
for (curr = child->previousSibling(); curr; curr = curr->previousSibling()) {
potentialLineBreakObjects.add(curr);
if (curr->isFloatingOrOutOfFlowPositioned())
continue;
if (curr->isReplaced()) {
InlineBox* wrapper = toLayoutBox(curr)->inlineBoxWrapper();
if (wrapper)
box = &wrapper->root();
} else if (curr->isText()) {
InlineTextBox* textBox = toLayoutText(curr)->lastTextBox();
if (textBox)
box = &textBox->root();
} else if (curr->isLayoutInline()) {
InlineBox* lastSiblingBox = toLayoutInline(curr)->lastLineBoxIncludingCulling();
if (lastSiblingBox)
box = &lastSiblingBox->root();
}
if (box)
break;
}
if (!box) {
if (inlineContainer && !inlineContainer->alwaysCreateLineBoxes()) {
// https://bugs.webkit.org/show_bug.cgi?id=60778
// We may have just removed a <br> with no line box that was our first child. In this case
// we won't find a previous sibling, but firstBox can be pointing to a following sibling.
// This isn't good enough, since we won't locate the root line box that encloses the removed
// <br>. We have to just over-invalidate a bit and go up to our parent.
if (!inlineContainer->ancestorLineBoxDirty()) {
inlineContainer->parent()->dirtyLinesFromChangedChild(inlineContainer);
inlineContainer->setAncestorLineBoxDirty(); // Mark the container to avoid dirtying the same lines again across multiple destroy() calls of the same subtree.
}
return;
}
box = &firstBox->root();
}
// If we found a line box, then dirty it.
if (box) {
RootInlineBox* adjacentBox;
box->markDirty();
// dirty the adjacent lines that might be affected
// NOTE: we dirty the previous line because RootInlineBox objects cache
// the address of the first object on the next line after a BR, which we may be
// invalidating here. For more info, see how LayoutBlock::layoutInlineChildren
// calls setLineBreakInfo with the result of findNextLineBreak. findNextLineBreak,
// despite the name, actually returns the first LayoutObject after the BR.
// <rdar://problem/3849947> "Typing after pasting line does not appear until after window resize."
adjacentBox = box->prevRootBox();
if (adjacentBox)
adjacentBox->markDirty();
adjacentBox = box->nextRootBox();
// If |child| or any of its immediately previous siblings with culled lineboxes is the object after a line-break in |box| or the linebox after it
// then that means |child| actually sits on the linebox after |box| (or is its line-break object) and so we need to dirty it as well.
if (adjacentBox && (potentialLineBreakObjects.contains(box->lineBreakObj()) || potentialLineBreakObjects.contains(adjacentBox->lineBreakObj()) || child->isBR() || isIsolated(container->style()->unicodeBidi())))
adjacentBox->markDirty();
}
}
void RenderFlow::dirtyLinesFromChangedChild(RenderObject* child, bool adding)
{
if (!parent() || selfNeedsLayout() || isTable())
return;
// For an empty inline, go ahead and propagate the check up to our parent.
if (isInline() && !firstLineBox())
return parent()->dirtyLinesFromChangedChild(this);
// Try to figure out which line box we belong in. First try to find a previous
// line box by examining our siblings. If we didn't find a line box, then use our
// parent's first line box.
RootInlineBox* box = 0;
RenderObject* curr = 0;
for (curr = child->previousSibling(); curr; curr = curr->previousSibling()) {
if (curr->isFloatingOrPositioned())
continue;
if (curr->isReplaced()) {
InlineBox* wrapper = curr->inlineBoxWrapper();
if (wrapper)
box = wrapper->root();
}
else if (curr->isText()) {
InlineTextBox* textBox = static_cast<RenderText*>(curr)->lastTextBox();
if (textBox)
box = textBox->root();
}
else if (curr->isInlineFlow()) {
InlineRunBox* runBox = static_cast<RenderFlow*>(curr)->lastLineBox();
if (runBox)
box = runBox->root();
}
if (box)
break;
}
if (!box && firstLineBox())
box = firstLineBox()->root();
// If we found a line box, then dirty it.
if (box) {
RootInlineBox* adjacentBox;
box->markDirty();
// dirty the adjacent lines that might be affected
// NOTE: we dirty the previous line because RootInlineBox objects cache
// the address of the first object on the next line after a BR, which we may be
// invalidating here. For more info, see how RenderBlock::layoutInlineChildren
// calls setLineBreakInfo with the result of findNextLineBreak. findNextLineBreak,
// despite the name, actually returns the first RenderObject after the BR.
// <rdar://problem/3849947> "Typing after pasting line does not appear until after window resize."
adjacentBox = box->prevRootBox();
if (adjacentBox)
adjacentBox->markDirty();
if (child->isBR() || (curr && curr->isBR())) {
adjacentBox = box->nextRootBox();
if (adjacentBox)
adjacentBox->markDirty();
}
}
}
void RenderLineBoxList::dirtyLinesFromChangedChild(RenderObject* container, RenderObject* child)
{
if (!container->parent() || (container->isRenderBlock() && (container->selfNeedsLayout() || !container->isBlockFlow())))
return;
RenderInline* inlineContainer = container->isRenderInline() ? toRenderInline(container) : 0;
InlineBox* firstBox = inlineContainer ? inlineContainer->firstLineBoxIncludingCulling() : firstLineBox();
// If we have no first line box, then just bail early.
if (!firstBox) {
// For an empty inline, go ahead and propagate the check up to our parent, unless the parent
// is already dirty.
if (container->isInline() && !container->ancestorLineBoxDirty()) {
container->parent()->dirtyLinesFromChangedChild(container);
container->setAncestorLineBoxDirty(); // Mark the container to avoid dirtying the same lines again across multiple destroy() calls of the same subtree.
}
return;
}
// Try to figure out which line box we belong in. First try to find a previous
// line box by examining our siblings. If we didn't find a line box, then use our
// parent's first line box.
RootInlineBox* box = 0;
RenderObject* curr = 0;
for (curr = child->previousSibling(); curr; curr = curr->previousSibling()) {
if (curr->isFloatingOrOutOfFlowPositioned())
continue;
if (curr->isReplaced()) {
InlineBox* wrapper = toRenderBox(curr)->inlineBoxWrapper();
if (wrapper)
box = wrapper->root();
} else if (curr->isText()) {
InlineTextBox* textBox = toRenderText(curr)->lastTextBox();
if (textBox)
box = textBox->root();
} else if (curr->isRenderInline()) {
InlineBox* lastSiblingBox = toRenderInline(curr)->lastLineBoxIncludingCulling();
if (lastSiblingBox)
box = lastSiblingBox->root();
}
if (box)
break;
}
if (!box) {
if (inlineContainer && !inlineContainer->alwaysCreateLineBoxes()) {
// https://bugs.webkit.org/show_bug.cgi?id=60778
// We may have just removed a <br> with no line box that was our first child. In this case
// we won't find a previous sibling, but firstBox can be pointing to a following sibling.
// This isn't good enough, since we won't locate the root line box that encloses the removed
// <br>. We have to just over-invalidate a bit and go up to our parent.
if (!inlineContainer->ancestorLineBoxDirty()) {
inlineContainer->parent()->dirtyLinesFromChangedChild(inlineContainer);
inlineContainer->setAncestorLineBoxDirty(); // Mark the container to avoid dirtying the same lines again across multiple destroy() calls of the same subtree.
}
return;
}
box = firstBox->root();
}
// If we found a line box, then dirty it.
if (box) {
RootInlineBox* adjacentBox;
box->markDirty();
// dirty the adjacent lines that might be affected
// NOTE: we dirty the previous line because RootInlineBox objects cache
// the address of the first object on the next line after a BR, which we may be
// invalidating here. For more info, see how RenderBlock::layoutInlineChildren
// calls setLineBreakInfo with the result of findNextLineBreak. findNextLineBreak,
// despite the name, actually returns the first RenderObject after the BR.
// <rdar://problem/3849947> "Typing after pasting line does not appear until after window resize."
adjacentBox = box->prevRootBox();
if (adjacentBox)
adjacentBox->markDirty();
adjacentBox = box->nextRootBox();
// If |child| has been inserted before the first element in the linebox, but after collapsed leading
// space, the search for |child|'s linebox will go past the leading space to the previous linebox and select that
// one as |box|. If we hit that situation here, dirty the |box| actually containing the child too.
bool insertedAfterLeadingSpace = box->lineBreakObj() == child->previousSibling();
if (adjacentBox && (adjacentBox->lineBreakObj() == child || child->isBR() || (curr && curr->isBR()) || insertedAfterLeadingSpace))
adjacentBox->markDirty();
}
}
