double LIB_EDIT_FRAME::BestZoom()
{
/* Please, note: wxMSW before version 2.9 seems have
* problems with zoom values < 1 ( i.e. userscale > 1) and needs to be patched:
* edit file <wxWidgets>/src/msw/dc.cpp
* search for line static const int VIEWPORT_EXTENT = 1000;
* and replace by static const int VIEWPORT_EXTENT = 10000;
*/
int dx, dy;
wxSize size;
EDA_RECT BoundaryBox;
if( m_component )
{
BoundaryBox = m_component->GetBoundingBox( m_unit, m_convert );
dx = BoundaryBox.GetWidth();
dy = BoundaryBox.GetHeight();
SetScrollCenterPosition( wxPoint( 0, 0 ) );
}
else
{
const PAGE_INFO& pageInfo = GetScreen()->GetPageSettings();
dx = pageInfo.GetSizeIU().x;
dy = pageInfo.GetSizeIU().y;
SetScrollCenterPosition( wxPoint( 0, 0 ) );
}
size = m_canvas->GetClientSize();
// Reserve a 10% margin around component bounding box.
double margin_scale_factor = 0.8;
double zx =(double) dx / ( margin_scale_factor * (double)size.x );
double zy = (double) dy / ( margin_scale_factor * (double)size.y );
double bestzoom = std::max( zx, zy );
// keep it >= minimal existing zoom (can happen for very small components
// for instance when starting a new component
if( bestzoom < GetScreen()->m_ZoomList[0] )
bestzoom = GetScreen()->m_ZoomList[0];
return bestzoom;
}
double LIB_VIEW_FRAME::BestZoom()
{
/* Please, note: wxMSW before version 2.9 seems have
* problems with zoom values < 1 ( i.e. userscale > 1) and needs to be patched:
* edit file <wxWidgets>/src/msw/dc.cpp
* search for line static const int VIEWPORT_EXTENT = 1000;
* and replace by static const int VIEWPORT_EXTENT = 10000;
*/
LIB_PART* part = NULL;
double bestzoom = 16.0; // default value for bestzoom
PART_LIB* lib = Prj().SchLibs()->FindLibrary( m_libraryName );
if( lib )
part = lib->FindPart( m_entryName );
if( !part )
{
SetScrollCenterPosition( wxPoint( 0, 0 ) );
return bestzoom;
}
wxSize size = m_canvas->GetClientSize();
EDA_RECT boundingBox = part->GetBoundingBox( m_unit, m_convert );
// Reserve a 10% margin around component bounding box.
double margin_scale_factor = 0.8;
double zx =(double) boundingBox.GetWidth() /
( margin_scale_factor * (double)size.x );
double zy = (double) boundingBox.GetHeight() /
( margin_scale_factor * (double)size.y);
// Calculates the best zoom
bestzoom = std::max( zx, zy );
// keep it >= minimal existing zoom (can happen for very small components
// like small power symbols
if( bestzoom < GetScreen()->m_ZoomList[0] )
bestzoom = GetScreen()->m_ZoomList[0];
SetScrollCenterPosition( boundingBox.Centre() );
return bestzoom;
}
void EDA_DRAW_PANEL::RefreshDrawingRect( const EDA_RECT& aRect, bool aEraseBackground )
{
INSTALL_UNBUFFERED_DC( dc, this );
wxRect rect = aRect;
rect.x = dc.LogicalToDeviceX( rect.x );
rect.y = dc.LogicalToDeviceY( rect.y );
rect.width = dc.LogicalToDeviceXRel( rect.width );
rect.height = dc.LogicalToDeviceYRel( rect.height );
wxLogTrace( kicadTraceCoords,
wxT( "Refresh area: drawing (%d, %d, %d, %d), device (%d, %d, %d, %d)" ),
aRect.GetX(), aRect.GetY(), aRect.GetWidth(), aRect.GetHeight(),
rect.x, rect.y, rect.width, rect.height );
RefreshRect( rect, aEraseBackground );
}
double PCB_BASE_FRAME::BestZoom()
{
if( m_Pcb == NULL )
return 1.0;
EDA_RECT ibbbox = GetBoardBoundingBox();
DSIZE clientz = m_canvas->GetClientSize();
DSIZE boardz( ibbbox.GetWidth(), ibbbox.GetHeight() );
double iu_per_du_X = clientz.x ? boardz.x / clientz.x : 1.0;
double iu_per_du_Y = clientz.y ? boardz.y / clientz.y : 1.0;
double bestzoom = std::max( iu_per_du_X, iu_per_du_Y );
GetScreen()->SetScrollCenterPosition( ibbbox.Centre() );
return bestzoom;
}
double GERBVIEW_FRAME::BestZoom()
{
GERBER_DRAW_ITEM* item = GetGerberLayout()->m_Drawings;
// gives a minimal value to zoom, if no item in list
if( item == NULL )
return ZOOM_FACTOR( 350.0 );
EDA_RECT bbox = GetGerberLayout()->ComputeBoundingBox();
wxSize size = m_canvas->GetClientSize();
double x = (double) bbox.GetWidth() / (double) size.x;
double y = (double) bbox.GetHeight() / (double) size.y;
SetScrollCenterPosition( bbox.Centre() );
double best_zoom = std::max( x, y );
return best_zoom;
}
double LIB_VIEW_FRAME::BestZoom()
{
LIB_PART* part = NULL;
double defaultLibraryZoom = 7.33;
if( m_libraryName.IsEmpty() || m_entryName.IsEmpty() )
{
SetScrollCenterPosition( wxPoint( 0, 0 ) );
return defaultLibraryZoom;
}
LIB_ALIAS* alias = nullptr;
try
{
alias = Prj().SchSymbolLibTable()->LoadSymbol( m_libraryName, m_entryName );
}
catch( ... )
{
}
if( alias )
part = alias->GetPart();
if( !part )
{
SetScrollCenterPosition( wxPoint( 0, 0 ) );
return defaultLibraryZoom;
}
EDA_RECT boundingBox = part->GetUnitBoundingBox( m_unit, m_convert );
double sizeX = (double) boundingBox.GetWidth();
double sizeY = (double) boundingBox.GetHeight();
wxPoint centre = boundingBox.Centre();
// Reserve a 20% margin around component bounding box.
double margin_scale_factor = 1.2;
return bestZoom( sizeX, sizeY, margin_scale_factor, centre );
}
void WORKSHEET_DATAITEM_TEXT::SetConstrainedTextSize()
{
m_ConstrainedTextSize = m_TextSize;
if( m_ConstrainedTextSize.x == 0 )
m_ConstrainedTextSize.x = m_DefaultTextSize.x;
if( m_ConstrainedTextSize.y == 0 )
m_ConstrainedTextSize.y = m_DefaultTextSize.y;
if( m_BoundingBoxSize.x || m_BoundingBoxSize.y )
{
int linewidth = 0;
// to know the X and Y size of the line, we should use
// EDA_TEXT::GetTextBox()
// but this function uses integers
// So, to avoid truncations with our unit in mm, use microns.
wxSize size_micron;
size_micron.x = KiROUND( m_ConstrainedTextSize.x * 1000.0 );
size_micron.y = KiROUND( m_ConstrainedTextSize.y * 1000.0 );
WS_DRAW_ITEM_TEXT dummy( WS_DRAW_ITEM_TEXT( this, this->m_FullText,
wxPoint(0,0),
size_micron,
linewidth, BLACK,
IsItalic(), IsBold() ) );
dummy.SetMultilineAllowed( true );
TransfertSetupToGraphicText( &dummy );
EDA_RECT rect = dummy.GetTextBox();
DSIZE size;
size.x = rect.GetWidth() / 1000.0;
size.y = rect.GetHeight() / 1000.0;
if( m_BoundingBoxSize.x && size.x > m_BoundingBoxSize.x )
m_ConstrainedTextSize.x *= m_BoundingBoxSize.x / size.x;
if( m_BoundingBoxSize.y && size.y > m_BoundingBoxSize.y )
m_ConstrainedTextSize.y *= m_BoundingBoxSize.y / size.y;
}
}
double LIB_EDIT_FRAME::BestZoom()
{
LIB_PART* part = GetCurPart();
double defaultLibraryZoom = 7.33;
if( !part )
{
SetScrollCenterPosition( wxPoint( 0, 0 ) );
return defaultLibraryZoom;
}
EDA_RECT boundingBox = part->GetUnitBoundingBox( m_unit, m_convert );
double sizeX = (double) boundingBox.GetWidth();
double sizeY = (double) boundingBox.GetHeight();
wxPoint centre = boundingBox.Centre();
// Reserve a 20% margin around component bounding box.
double margin_scale_factor = 1.2;
return bestZoom( sizeX, sizeY, margin_scale_factor, centre);
}
/*
* Draw (on m_panelShowPin) the pin currently edited
* accroding to current settings in dialog
*/
void DIALOG_LIB_EDIT_PIN::OnPaintShowPanel( wxPaintEvent& event )
{
wxPaintDC dc( m_panelShowPin );
wxSize dc_size = dc.GetSize();
dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );
// Give a parent to m_dummyPin only from draw purpose.
// In fact m_dummyPin should not have a parent, but draw functions need a parent
// to know some options, about pin texts
LIB_EDIT_FRAME* libframe = (LIB_EDIT_FRAME*) GetParent();
m_dummyPin->SetParent( libframe->GetCurPart() );
// Calculate a suitable scale to fit the available draw area
EDA_RECT bBox = m_dummyPin->GetBoundingBox();
double xscale = (double) dc_size.x / bBox.GetWidth();
double yscale = (double) dc_size.y / bBox.GetHeight();
double scale = std::min( xscale, yscale );
// Give a 10% margin
scale *= 0.9;
dc.SetUserScale( scale, scale );
wxPoint offset = -bBox.Centre();
GRResetPenAndBrush( &dc );
// This is a flag for m_dummyPin->Draw
uintptr_t flags = uintptr_t( PIN_DRAW_TEXTS | PIN_DRAW_DANGLING );
m_dummyPin->Draw( NULL, &dc, offset, COLOR4D::UNSPECIFIED, GR_COPY,
(void*)flags, DefaultTransform );
m_dummyPin->SetParent(NULL);
event.Skip();
}
EDA_RECT PCB_BASE_FRAME::GetBoardBoundingBox( bool aBoardEdgesOnly ) const
{
wxASSERT( m_Pcb );
EDA_RECT area = m_Pcb->ComputeBoundingBox( aBoardEdgesOnly );
if( area.GetWidth() == 0 && area.GetHeight() == 0 )
{
wxSize pageSize = GetPageSizeIU();
if( m_showBorderAndTitleBlock )
{
area.SetOrigin( 0, 0 );
area.SetEnd( pageSize.x, pageSize.y );
}
else
{
area.SetOrigin( -pageSize.x / 2, -pageSize.y / 2 );
area.SetEnd( pageSize.x / 2, pageSize.y / 2 );
}
}
return area;
}
int genPlacementRoutingMatrix( BOARD* aBrd, EDA_MSG_PANEL* messagePanel )
{
wxString msg;
RoutingMatrix.UnInitRoutingMatrix();
EDA_RECT bbox = aBrd->ComputeBoundingBox( true );
if( bbox.GetWidth() == 0 || bbox.GetHeight() == 0 )
{
DisplayError( NULL, _( "No PCB edge found, unknown board size!" ) );
return 0;
}
RoutingMatrix.ComputeMatrixSize( aBrd, true );
int nbCells = RoutingMatrix.m_Ncols * RoutingMatrix.m_Nrows;
messagePanel->EraseMsgBox();
msg.Printf( wxT( "%d" ), RoutingMatrix.m_Ncols );
messagePanel->SetMessage( 1, _( "Cols" ), msg, GREEN );
msg.Printf( wxT( "%d" ), RoutingMatrix.m_Nrows );
messagePanel->SetMessage( 7, _( "Lines" ), msg, GREEN );
msg.Printf( wxT( "%d" ), nbCells );
messagePanel->SetMessage( 14, _( "Cells." ), msg, YELLOW );
// Choose the number of board sides.
RoutingMatrix.m_RoutingLayersCount = 2;
RoutingMatrix.InitRoutingMatrix();
// Display memory usage.
msg.Printf( wxT( "%d" ), RoutingMatrix.m_MemSize / 1024 );
messagePanel->SetMessage( 24, wxT( "Mem(Kb)" ), msg, CYAN );
g_Route_Layer_BOTTOM = F_Cu;
if( RoutingMatrix.m_RoutingLayersCount > 1 )
g_Route_Layer_BOTTOM = B_Cu;
g_Route_Layer_TOP = F_Cu;
// Place the edge layer segments
TRACK TmpSegm( NULL );
TmpSegm.SetLayer( UNDEFINED_LAYER );
TmpSegm.SetNetCode( -1 );
TmpSegm.SetWidth( RoutingMatrix.m_GridRouting / 2 );
EDA_ITEM* PtStruct = aBrd->m_Drawings;
for( ; PtStruct != NULL; PtStruct = PtStruct->Next() )
{
DRAWSEGMENT* DrawSegm;
switch( PtStruct->Type() )
{
case PCB_LINE_T:
DrawSegm = (DRAWSEGMENT*) PtStruct;
if( DrawSegm->GetLayer() != Edge_Cuts )
break;
TraceSegmentPcb( DrawSegm, HOLE | CELL_is_EDGE,
RoutingMatrix.m_GridRouting, WRITE_CELL );
break;
case PCB_TEXT_T:
default:
break;
}
}
// Mark cells of the routing matrix to CELL_is_ZONE
// (i.e. availlable cell to place a module )
// Init a starting point of attachment to the area.
RoutingMatrix.OrCell( RoutingMatrix.m_Nrows / 2, RoutingMatrix.m_Ncols / 2,
BOTTOM, CELL_is_ZONE );
// find and mark all other availlable cells:
for( int ii = 1; ii != 0; )
ii = propagate();
// Initialize top layer. to the same value as the bottom layer
if( RoutingMatrix.m_BoardSide[TOP] )
memcpy( RoutingMatrix.m_BoardSide[TOP], RoutingMatrix.m_BoardSide[BOTTOM],
nbCells * sizeof(MATRIX_CELL) );
return 1;
}
void BOARD_PRINTOUT_CONTROLLER::DrawPage()
{
wxPoint offset;
double userscale;
EDA_RECT boardBoundingBox;
EDA_RECT drawRect;
wxDC* dc = GetDC();
BASE_SCREEN* screen = m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxSize pageSizeIU = m_Parent->GetPageSizeIU();
wxBusyCursor dummy;
#if defined (PCBNEW)
BOARD * brd = ((PCB_BASE_FRAME*) m_Parent)->GetBoard();
boardBoundingBox = brd->ComputeBoundingBox();
wxString titleblockFilename = brd->GetFileName();
#elif defined (GERBVIEW)
boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox();
wxString titleblockFilename; // TODO see if we uses the gerber file name
#else
#error BOARD_PRINTOUT_CONTROLLER::DrawPage() works only for PCBNEW or GERBVIEW
#endif
// Use the page size as the drawing area when the board is shown or the user scale
// is less than 1.
if( m_PrintParams.PrintBorderAndTitleBlock() )
boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU );
wxLogTrace( tracePrinting, wxT( "Drawing bounding box: x=%d, y=%d, w=%d, h=%d" ),
boardBoundingBox.GetX(), boardBoundingBox.GetY(),
boardBoundingBox.GetWidth(), boardBoundingBox.GetHeight() );
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( m_PrintParams.m_PrintScale == 0 ) // fit in page option
{
if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight())
{
int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings
double scaleX = (double)(pageSizeIU.x - (2 * margin)) /
boardBoundingBox.GetWidth();
double scaleY = (double)(pageSizeIU.y - (2 * margin)) /
boardBoundingBox.GetHeight();
userscale = (scaleX < scaleY) ? scaleX : scaleY;
}
else
userscale = 1.0;
}
wxSize scaledPageSize = pageSizeIU;
drawRect.SetSize( scaledPageSize );
scaledPageSize.x = wxRound( scaledPageSize.x / userscale );
scaledPageSize.y = wxRound( scaledPageSize.y / userscale );
if( m_PrintParams.m_PageSetupData )
{
wxLogTrace( tracePrinting, wxT( "Fit size to page margins: x=%d, y=%d" ),
scaledPageSize.x, scaledPageSize.y );
// Always scale to the size of the paper.
FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( m_PrintParams.m_PrintScale == 1.0 )
{
// We want a 1:1 scale, regardless the page setup
// like page size, margin ...
MapScreenSizeToPaper(); // set best scale and offset (scale is not used)
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = (double) w / (IU_PER_MILS*1000);
double accurate_Yscale = (double) h / (IU_PER_MILS*1000);
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= (double)PlotAreaSize.x / w;
accurate_Yscale *= (double)PlotAreaSize.y / h;
}
// Fine scale adjust
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Set print scale for 1:1 exact scale
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
wxLogTrace( tracePrinting, wxT( "Plot area in pixels: x=%d, y=%d" ),
PlotAreaSizeInPixels.x, PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale( &scalex, &scaley );
wxLogTrace( tracePrinting, wxT( "DC user scale: x=%g, y=%g" ),
scalex, scaley );
wxSize PlotAreaSizeInUserUnits;
PlotAreaSizeInUserUnits.x = KiROUND( PlotAreaSizeInPixels.x / scalex );
PlotAreaSizeInUserUnits.y = KiROUND( PlotAreaSizeInPixels.y / scaley );
wxLogTrace( tracePrinting, wxT( "Scaled plot area in user units: x=%d, y=%d" ),
PlotAreaSizeInUserUnits.x, PlotAreaSizeInUserUnits.y );
// In module editor, the module is located at 0,0 but for printing
// it is moved to pageSizeIU.x/2, pageSizeIU.y/2.
// So the equivalent board must be moved to the center of the page:
if( m_Parent->IsType( MODULE_EDITOR_FRAME_TYPE ) )
{
boardBoundingBox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) );
}
// In some cases the plot origin is the centre of the board outline rather than the center
// of the selected paper size.
if( m_PrintParams.CenterOnBoardOutline() )
{
// Here we are only drawing the board and it's contents.
drawRect = boardBoundingBox;
offset.x += wxRound( (double) -scaledPageSize.x / 2.0 );
offset.y += wxRound( (double) -scaledPageSize.y / 2.0 );
wxPoint center = boardBoundingBox.Centre();
if( printMirror )
{
// Calculate the mirrored center of the board.
center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x;
}
offset += center;
}
GRResetPenAndBrush( dc );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
screen->m_IsPrinting = true;
EDA_COLOR_T bg_color = g_DrawBgColor;
// Print frame reference, if reqquested, before
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
if( m_PrintParams.PrintBorderAndTitleBlock() )
m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
IU_PER_MILS, titleblockFilename );
if( printMirror )
{
// To plot mirror, we reverse the x axis, and modify the plot x origin
dc->SetAxisOrientation( false, false);
/* Plot offset x is moved by the x plot area size in order to have
* the old draw area in the new draw area, because the draw origin has not moved
* (this is the upper left corner) but the X axis is reversed, therefore the plotting area
* is the x coordinate values from - PlotAreaSize.x to 0 */
int x_dc_offset = PlotAreaSizeInPixels.x;
x_dc_offset = KiROUND( x_dc_offset * userscale );
dc->SetDeviceOrigin( x_dc_offset, 0 );
wxLogTrace( tracePrinting, wxT( "Device origin: x=%d, y=%d" ),
x_dc_offset, 0 );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ),
panel->GetClipBox()->GetSize() ) );
}
// screen->m_DrawOrg = offset;
dc->SetLogicalOrigin( offset.x, offset.y );
wxLogTrace( tracePrinting, wxT( "Logical origin: x=%d, y=%d" ),
offset.x, offset.y );
#if defined(wxUSE_LOG_TRACE) && defined( DEBUG )
wxRect paperRect = GetPaperRectPixels();
wxLogTrace( tracePrinting, wxT( "Paper rectangle: left=%d, top=%d, "
"right=%d, bottom=%d" ),
paperRect.GetLeft(), paperRect.GetTop(), paperRect.GetRight(),
paperRect.GetBottom() );
int devLeft = dc->LogicalToDeviceX( drawRect.GetX() );
int devTop = dc->LogicalToDeviceY( drawRect.GetY() );
int devRight = dc->LogicalToDeviceX( drawRect.GetRight() );
int devBottom = dc->LogicalToDeviceY( drawRect.GetBottom() );
wxLogTrace( tracePrinting, wxT( "Final device rectangle: left=%d, top=%d, "
"right=%d, bottom=%d\n" ),
devLeft, devTop, devRight, devBottom );
#endif
g_DrawBgColor = WHITE;
/* when printing in color mode, we use the graphic OR mode that gives the same look as
* the screen but because the background is white when printing, we must use a trick:
* In order to plot on a white background in OR mode we must:
* 1 - Plot all items in black, this creates a local black background
* 2 - Plot in OR mode on black "local" background
*/
if( !m_PrintParams.m_Print_Black_and_White )
{
// Creates a "local" black background
GRForceBlackPen( true );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer,
printMirror, &m_PrintParams );
GRForceBlackPen( false );
}
else
GRForceBlackPen( true );
#if defined (GERBVIEW)
// In B&W mode, do not force black pen for Gerbview
// because negative objects need a white pen, not a black pen
// B&W mode is handled in print page
GRForceBlackPen( false );
#endif
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror,
&m_PrintParams );
g_DrawBgColor = bg_color;
screen->m_IsPrinting = false;
panel->SetClipBox( tmp );
GRForceBlackPen( false );
}
/*
* This is the real print function: print the active screen
*/
void BOARD_PRINTOUT_CONTROLER::DrawPage()
{
int tmpzoom;
wxPoint tmp_startvisu;
wxPoint old_org;
wxPoint DrawOffset; // Offset de trace
double userscale;
double DrawZoom = 1;
wxDC* dc = GetDC();
PCB_SCREEN* screen = (PCB_SCREEN*) m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxBusyCursor dummy;
// Save old draw scale and draw offset
tmp_startvisu = screen->m_StartVisu;
tmpzoom = screen->GetZoom();
old_org = screen->m_DrawOrg;
// Change draw scale and offset to draw the whole page
screen->SetScalingFactor( DrawZoom );
screen->m_DrawOrg.x = screen->m_DrawOrg.y = 0;
screen->m_StartVisu.x = screen->m_StartVisu.y = 0;
PCB_BASE_FRAME* pcbframe = (PCB_BASE_FRAME*) m_Parent;
wxSize pageSizeIU = pcbframe->GetPageSizeIU(); // internal units
EDA_RECT bbbox = pcbframe->GetBoard()->ComputeBoundingBox();
// In module editor, the module is located at 0,0 but for printing
// it is moved to pageSizeIU.x/2, pageSizeIU.y/2.
// So the equivalent board must be moved:
if( m_Parent->IsType( MODULE_EDITOR_FRAME ) )
{
bbbox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) );
}
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( userscale == 0 ) // fit in page
{
// Margin = 0.4 inch
#if defined(KICAD_NANOMETRE)
int extra_margin = int( 0.4 * 25400 ); // nanometers
#else
int extra_margin = int( 0.4 * 1000 ); // deci-mils
#endif
pageSizeIU.x = bbbox.GetWidth() + extra_margin * 2;
pageSizeIU.y = bbbox.GetHeight() + extra_margin * 2;
userscale = 0.99;
}
if( (m_PrintParams.m_PrintScale > 1.0) // scale > 1 -> Recadrage
|| (m_PrintParams.m_PrintScale == 0) ) // fit in page
{
DrawOffset += bbbox.Centre();
}
if( m_PrintParams.m_PageSetupData )
{
wxSize pagesize;
pagesize.x = int( pageSizeIU.x / userscale );
pagesize.y = int( pageSizeIU.y / userscale );
FitThisSizeToPageMargins( pagesize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( userscale == 1.0 )
{
// We want a 1:1 scale and margins for printing
MapScreenSizeToPaper();
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = ( (double) ( DrawZoom * w ) ) / (double) PCB_INTERNAL_UNIT;
double accurate_Yscale = ( (double) ( DrawZoom * h ) ) / (double) PCB_INTERNAL_UNIT;
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= PlotAreaSize.x;
accurate_Xscale /= (double) w;
accurate_Yscale *= PlotAreaSize.y;
accurate_Yscale /= (double) h;
}
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Fine scale adjust
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale(&scalex, &scaley);
wxSize PlotAreaSizeInUserUnits;
PlotAreaSizeInUserUnits.x = (int) (PlotAreaSizeInPixels.x/scalex);
PlotAreaSizeInUserUnits.y = (int) (PlotAreaSizeInPixels.y/scaley);
/* In some cases the plot origin is the centre of the page
* when:
* - Asked
* - scale > 1
* - fit in page
*/
if( m_PrintParams.m_ForceCentered
|| (m_PrintParams.m_PrintScale > 1.0) // scale > 1
|| (m_PrintParams.m_PrintScale == 0) ) // fit in page
{
DrawOffset.x -= PlotAreaSizeInUserUnits.x / 2;
DrawOffset.y -= PlotAreaSizeInUserUnits.y / 2;
}
screen->m_DrawOrg = DrawOffset;
GRResetPenAndBrush( dc );
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
m_Parent->GetScreen()->m_IsPrinting = true;
int bg_color = g_DrawBgColor;
if( m_PrintParams.m_Print_Sheet_Ref )
m_Parent->TraceWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize );
if( printMirror )
{
// To plot mirror, we reverse the y axis, and modify the plot y origin
dc->SetAxisOrientation( true, true );
if( userscale < 1.0 )
scaley /= userscale;
/* Plot offset y is moved by the y plot area size in order to have
* the old draw area in the new draw area, because the draw origin has not moved
* (this is the upper left corner) but the Y axis is reversed, therefore the plotting area
* is the y coordinate values from - PlotAreaSize.y to 0 */
int y_dc_offset = PlotAreaSizeInPixels.y;
y_dc_offset = (int) ( ( double ) y_dc_offset * userscale );
dc->SetDeviceOrigin( 0, y_dc_offset );
int ysize = (int) ( PlotAreaSizeInPixels.y / scaley );
DrawOffset.y += ysize;
/* in order to keep the board position in the sheet
* (when user scale <= 1) the y offset in moved by the distance between
* the middle of the page and the middle of the board
* This is equivalent to put the mirror axis to the board centre
* for scales > 1, the DrawOffset was already computed to have the board centre
* to the middle of the page.
*/
wxPoint pcb_centre = bbbox.Centre();
if( userscale <= 1.0 )
DrawOffset.y += pcb_centre.y - (ysize / 2);
dc->SetLogicalOrigin( screen->m_DrawOrg.x, screen->m_DrawOrg.y );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ),
panel->GetClipBox()->GetSize() ) );
}
g_DrawBgColor = WHITE;
/* when printing in color mode, we use the graphic OR mode that gives the same look as the screen
* But because the background is white when printing, we must use a trick:
* In order to plot on a white background in OR mode we must:
* 1 - Plot all items in black, this creates a local black backgroud
* 2 - Plot in OR mode on black "local" background
*/
if( !m_PrintParams.m_Print_Black_and_White )
{ // Creates a "local" black background
GRForceBlackPen( true );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
GRForceBlackPen( false );
}
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
g_DrawBgColor = bg_color;
m_Parent->GetScreen()->m_IsPrinting = false;
panel->SetClipBox( tmp );
GRForceBlackPen( false );
screen->m_StartVisu = tmp_startvisu;
screen->m_DrawOrg = old_org;
screen->SetZoom( tmpzoom );
}
bool D_PAD::HitTest( const EDA_RECT& aRect, bool aContained, int aAccuracy ) const
{
EDA_RECT arect = aRect;
arect.Normalize();
arect.Inflate( aAccuracy );
wxPoint shapePos = ShapePos();
EDA_RECT shapeRect;
int r;
EDA_RECT bb = GetBoundingBox();
wxPoint endCenter;
int radius;
if( !arect.Intersects( bb ) )
return false;
// This covers total containment for all test cases
if( arect.Contains( bb ) )
return true;
switch( GetShape() )
{
case PAD_SHAPE_CIRCLE:
return arect.IntersectsCircle( GetPosition(), GetBoundingRadius() );
case PAD_SHAPE_RECT:
shapeRect.SetOrigin( shapePos );
shapeRect.Inflate( m_Size.x / 2, m_Size.y / 2 );
return arect.Intersects( shapeRect, m_Orient );
case PAD_SHAPE_OVAL:
// Circlular test if dimensions are equal
if( m_Size.x == m_Size.y )
return arect.IntersectsCircle( shapePos, GetBoundingRadius() );
shapeRect.SetOrigin( shapePos );
// Horizontal dimension is greater
if( m_Size.x > m_Size.y )
{
radius = m_Size.y / 2;
shapeRect.Inflate( m_Size.x / 2 - radius, radius );
endCenter = wxPoint( m_Size.x / 2 - radius, 0 );
RotatePoint( &endCenter, m_Orient );
// Test circular ends
if( arect.IntersectsCircle( shapePos + endCenter, radius ) ||
arect.IntersectsCircle( shapePos - endCenter, radius ) )
{
return true;
}
}
else
{
radius = m_Size.x / 2;
shapeRect.Inflate( radius, m_Size.y / 2 - radius );
endCenter = wxPoint( 0, m_Size.y / 2 - radius );
RotatePoint( &endCenter, m_Orient );
// Test circular ends
if( arect.IntersectsCircle( shapePos + endCenter, radius ) ||
arect.IntersectsCircle( shapePos - endCenter, radius ) )
{
return true;
}
}
// Test rectangular portion between rounded ends
if( arect.Intersects( shapeRect, m_Orient ) )
{
return true;
}
break;
case PAD_SHAPE_TRAPEZOID:
/* Trapezoid intersection tests:
* A) Any points of rect inside trapezoid
* B) Any points of trapezoid inside rect
* C) Any sides of trapezoid cross rect
*/
{
wxPoint poly[4];
BuildPadPolygon( poly, wxSize( 0, 0 ), 0 );
wxPoint corners[4];
corners[0] = wxPoint( arect.GetLeft(), arect.GetTop() );
corners[1] = wxPoint( arect.GetRight(), arect.GetTop() );
corners[2] = wxPoint( arect.GetRight(), arect.GetBottom() );
corners[3] = wxPoint( arect.GetLeft(), arect.GetBottom() );
for( int i=0; i<4; i++ )
{
RotatePoint( &poly[i], m_Orient );
poly[i] += shapePos;
}
for( int ii=0; ii<4; ii++ )
{
if( TestPointInsidePolygon( poly, 4, corners[ii] ) )
{
return true;
}
if( arect.Contains( poly[ii] ) )
{
return true;
}
if( arect.Intersects( poly[ii], poly[(ii+1) % 4] ) )
{
return true;
}
}
return false;
}
case PAD_SHAPE_ROUNDRECT:
/* RoundRect intersection can be broken up into simple tests:
* a) Test intersection of horizontal rect
* b) Test intersection of vertical rect
* c) Test intersection of each corner
*/
r = GetRoundRectCornerRadius();
/* Test A - intersection of horizontal rect */
shapeRect.SetSize( 0, 0 );
shapeRect.SetOrigin( shapePos );
shapeRect.Inflate( m_Size.x / 2, m_Size.y / 2 - r );
// Short-circuit test for zero width or height
if( shapeRect.GetWidth() > 0 && shapeRect.GetHeight() > 0 &&
arect.Intersects( shapeRect, m_Orient ) )
{
return true;
}
/* Test B - intersection of vertical rect */
shapeRect.SetSize( 0, 0 );
shapeRect.SetOrigin( shapePos );
shapeRect.Inflate( m_Size.x / 2 - r, m_Size.y / 2 );
// Short-circuit test for zero width or height
if( shapeRect.GetWidth() > 0 && shapeRect.GetHeight() > 0 &&
arect.Intersects( shapeRect, m_Orient ) )
{
return true;
}
/* Test C - intersection of each corner */
endCenter = wxPoint( m_Size.x / 2 - r, m_Size.y / 2 - r );
RotatePoint( &endCenter, m_Orient );
if( arect.IntersectsCircle( shapePos + endCenter, r ) ||
arect.IntersectsCircle( shapePos - endCenter, r ) )
{
return true;
}
endCenter = wxPoint( m_Size.x / 2 - r, -m_Size.y / 2 + r );
RotatePoint( &endCenter, m_Orient );
if( arect.IntersectsCircle( shapePos + endCenter, r ) ||
arect.IntersectsCircle( shapePos - endCenter, r ) )
{
return true;
}
break;
default:
break;
}
return false;
}
void CINFO3D_VISU::InitSettings( REPORTER *aStatusTextReporter )
{
wxLogTrace( m_logTrace, wxT( "CINFO3D_VISU::InitSettings" ) );
// Calculates the board bounding box
// First, use only the board outlines
EDA_RECT bbbox = m_board->ComputeBoundingBox( true );
// If no outlines, use the board with items
if( ( bbbox.GetWidth() == 0 ) && ( bbbox.GetHeight() == 0 ) )
bbbox = m_board->ComputeBoundingBox( false );
// Gives a non null size to avoid issues in zoom / scale calculations
if( ( bbbox.GetWidth() == 0 ) && ( bbbox.GetHeight() == 0 ) )
bbbox.Inflate( Millimeter2iu( 10 ) );
m_boardSize = bbbox.GetSize();
m_boardPos = bbbox.Centre();
wxASSERT( (m_boardSize.x > 0) && (m_boardSize.y > 0) );
m_boardPos.y = -m_boardPos.y; // The y coord is inverted in 3D viewer
m_copperLayersCount = m_board->GetCopperLayerCount();
// Ensure the board has 2 sides for 3D views, because it is hard to find
// a *really* single side board in the true life...
if( m_copperLayersCount < 2 )
m_copperLayersCount = 2;
// Calculate the convertion to apply to all positions.
m_biuTo3Dunits = RANGE_SCALE_3D / std::max( m_boardSize.x, m_boardSize.y );
// Calculate factors for cicle segment approximation
m_calc_seg_min_factor3DU = (float)( SEG_MIN_FACTOR_BIU * m_biuTo3Dunits );
m_calc_seg_max_factor3DU = (float)( SEG_MAX_FACTOR_BIU * m_biuTo3Dunits );
m_epoxyThickness3DU = m_board->GetDesignSettings().GetBoardThickness() *
m_biuTo3Dunits;
// !TODO: use value defined by user (currently use default values by ctor
m_copperThickness3DU = COPPER_THICKNESS * m_biuTo3Dunits;
m_nonCopperLayerThickness3DU = TECH_LAYER_THICKNESS * m_biuTo3Dunits;
// Init Z position of each layer
// calculate z position for each copper layer
// Zstart = -m_epoxyThickness / 2.0 is the z position of the back (bottom layer) (layer id = 31)
// Zstart = +m_epoxyThickness / 2.0 is the z position of the front (top layer) (layer id = 0)
// all unused copper layer z position are set to 0
// ____==__________==________==______ <- Bottom = +m_epoxyThickness / 2.0,
// | | Top = Bottom + m_copperThickness
// |__________________________________|
// == == == == <- Bottom = -m_epoxyThickness / 2.0,
// Top = Bottom - m_copperThickness
unsigned int layer;
for( layer = 0; layer < m_copperLayersCount; ++layer )
{
m_layerZcoordBottom[layer] = m_epoxyThickness3DU / 2.0f -
(m_epoxyThickness3DU * layer / (m_copperLayersCount - 1) );
if( layer < (m_copperLayersCount / 2) )
m_layerZcoordTop[layer] = m_layerZcoordBottom[layer] + m_copperThickness3DU;
else
m_layerZcoordTop[layer] = m_layerZcoordBottom[layer] - m_copperThickness3DU;
}
#define layerThicknessMargin 1.1
const float zpos_offset = m_nonCopperLayerThickness3DU * layerThicknessMargin;
// Fill remaining unused copper layers and back layer zpos
// with -m_epoxyThickness / 2.0
for( ; layer < MAX_CU_LAYERS; layer++ )
{
m_layerZcoordBottom[layer] = -(m_epoxyThickness3DU / 2.0f);
m_layerZcoordTop[layer] = -(m_epoxyThickness3DU / 2.0f) - m_copperThickness3DU;
}
// This is the top of the copper layer thickness.
const float zpos_copperTop_back = m_layerZcoordTop[B_Cu];
const float zpos_copperTop_front = m_layerZcoordTop[F_Cu];
// calculate z position for each non copper layer
// Solder mask and Solder paste have the same Z position
for( int layer_id = MAX_CU_LAYERS; layer_id < LAYER_ID_COUNT; ++layer_id )
{
float zposTop;
float zposBottom;
switch( layer_id )
{
case B_Adhes:
zposBottom = zpos_copperTop_back - 2.0f * zpos_offset;
zposTop = zposBottom - m_nonCopperLayerThickness3DU;
break;
case F_Adhes:
zposBottom = zpos_copperTop_front + 2.0f * zpos_offset;
zposTop = zposBottom + m_nonCopperLayerThickness3DU;
break;
case B_Mask:
case B_Paste:
zposBottom = zpos_copperTop_back;
zposTop = zpos_copperTop_back - m_nonCopperLayerThickness3DU;
break;
case F_Mask:
case F_Paste:
zposTop = zpos_copperTop_front + m_nonCopperLayerThickness3DU;
zposBottom = zpos_copperTop_front;
break;
case B_SilkS:
zposBottom = zpos_copperTop_back - 1.0f * zpos_offset;
zposTop = zposBottom - m_nonCopperLayerThickness3DU;
break;
case F_SilkS:
zposBottom = zpos_copperTop_front + 1.0f * zpos_offset;
zposTop = zposBottom + m_nonCopperLayerThickness3DU;
break;
// !TODO: review
default:
zposTop = zpos_copperTop_front + (layer_id - MAX_CU_LAYERS + 3.0f) * zpos_offset;
zposBottom = zposTop - m_nonCopperLayerThickness3DU;
break;
}
m_layerZcoordTop[layer_id] = zposTop;
m_layerZcoordBottom[layer_id] = zposBottom;
}
m_boardCenter = SFVEC3F( m_boardPos.x * m_biuTo3Dunits,
m_boardPos.y * m_biuTo3Dunits,
0.0f );
SFVEC3F boardSize = SFVEC3F( m_boardSize.x * m_biuTo3Dunits,
m_boardSize.y * m_biuTo3Dunits,
0.0f );
boardSize /= 2.0f;
SFVEC3F boardMin = (m_boardCenter - boardSize);
SFVEC3F boardMax = (m_boardCenter + boardSize);
boardMin.z = m_layerZcoordTop[B_Adhes];
boardMax.z = m_layerZcoordTop[F_Adhes];
m_boardBoudingBox = CBBOX( boardMin, boardMax );
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_startCreateBoardPolyTime = GetRunningMicroSecs();
#endif
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Build board body" ) );
createBoardPolygon();
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_stopCreateBoardPolyTime = GetRunningMicroSecs();
unsigned stats_startCreateLayersTime = stats_stopCreateBoardPolyTime;
#endif
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Create layers" ) );
createLayers( aStatusTextReporter );
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_stopCreateLayersTime = GetRunningMicroSecs();
printf( "CINFO3D_VISU::InitSettings times\n" );
printf( " CreateBoardPoly: %.3f ms\n",
(float)( stats_stopCreateBoardPolyTime - stats_startCreateBoardPolyTime ) / 1e3 );
printf( " CreateLayers and holes: %.3f ms\n",
(float)( stats_stopCreateLayersTime - stats_startCreateLayersTime ) / 1e3 );
printf( "\n" );
#endif
}
bool GENDRILL_WRITER_BASE::genDrillMapFile( const wxString& aFullFileName,
PlotFormat aFormat )
{
// Remark:
// Hole list must be created before calling this function, by buildHolesList(),
// for the right holes set (PTH, NPTH, buried/blind vias ...)
double scale = 1.0;
wxPoint offset;
PLOTTER* plotter = NULL;
PAGE_INFO dummy( PAGE_INFO::A4, false );
PCB_PLOT_PARAMS plot_opts; // starts plotting with default options
LOCALE_IO toggle; // use standard C notation for float numbers
const PAGE_INFO& page_info = m_pageInfo ? *m_pageInfo : dummy;
// Calculate dimensions and center of PCB
EDA_RECT bbbox = m_pcb->GetBoardEdgesBoundingBox();
// Calculate the scale for the format type, scale 1 in HPGL, drawing on
// an A4 sheet in PS, + text description of symbols
switch( aFormat )
{
case PLOT_FORMAT_GERBER:
offset = GetOffset();
plotter = new GERBER_PLOTTER();
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
plotter->SetGerberCoordinatesFormat( 5 ); // format x.5 unit = mm
break;
case PLOT_FORMAT_HPGL: // Scale for HPGL format.
{
HPGL_PLOTTER* hpgl_plotter = new HPGL_PLOTTER;
plotter = hpgl_plotter;
hpgl_plotter->SetPenNumber( plot_opts.GetHPGLPenNum() );
hpgl_plotter->SetPenSpeed( plot_opts.GetHPGLPenSpeed() );
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
default:
wxASSERT( false );
// fall through
case PLOT_FORMAT_PDF:
case PLOT_FORMAT_POST:
{
PAGE_INFO pageA4( wxT( "A4" ) );
wxSize pageSizeIU = pageA4.GetSizeIU();
// Reserve a margin around the page.
int margin = KiROUND( 20 * IU_PER_MM );
// Calculate a scaling factor to print the board on the sheet
double Xscale = double( pageSizeIU.x - ( 2 * margin ) ) / bbbox.GetWidth();
// We should print the list of drill sizes, so reserve room for it
// 60% height for board 40% height for list
int ypagesize_for_board = KiROUND( pageSizeIU.y * 0.6 );
double Yscale = double( ypagesize_for_board - margin ) / bbbox.GetHeight();
scale = std::min( Xscale, Yscale );
// Experience shows the scale should not to large, because texts
// create problem (can be to big or too small).
// So the scale is clipped at 3.0;
scale = std::min( scale, 3.0 );
offset.x = KiROUND( double( bbbox.Centre().x ) -
( pageSizeIU.x / 2.0 ) / scale );
offset.y = KiROUND( double( bbbox.Centre().y ) -
( ypagesize_for_board / 2.0 ) / scale );
if( aFormat == PLOT_FORMAT_PDF )
plotter = new PDF_PLOTTER;
else
plotter = new PS_PLOTTER;
plotter->SetPageSettings( pageA4 );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_DXF:
{
DXF_PLOTTER* dxf_plotter = new DXF_PLOTTER;
plotter = dxf_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_SVG:
{
SVG_PLOTTER* svg_plotter = new SVG_PLOTTER;
plotter = svg_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
}
plotter->SetCreator( wxT( "PCBNEW" ) );
plotter->SetDefaultLineWidth( 5 * IU_PER_MILS );
plotter->SetColorMode( false );
if( ! plotter->OpenFile( aFullFileName ) )
{
delete plotter;
return false;
}
plotter->StartPlot();
// Draw items on edge layer (not all, only items useful for drill map
BRDITEMS_PLOTTER itemplotter( plotter, m_pcb, plot_opts );
itemplotter.SetLayerSet( Edge_Cuts );
for( auto PtStruct : m_pcb->Drawings() )
{
switch( PtStruct->Type() )
{
case PCB_LINE_T:
itemplotter.PlotDrawSegment( (DRAWSEGMENT*) PtStruct );
break;
case PCB_TEXT_T:
itemplotter.PlotTextePcb( (TEXTE_PCB*) PtStruct );
break;
case PCB_DIMENSION_T:
case PCB_TARGET_T:
case PCB_MARKER_T: // do not draw
default:
break;
}
}
int x, y;
int plotX, plotY, TextWidth;
int intervalle = 0;
char line[1024];
wxString msg;
int textmarginaftersymbol = KiROUND( 2 * IU_PER_MM );
// Set Drill Symbols width
plotter->SetDefaultLineWidth( 0.2 * IU_PER_MM / scale );
plotter->SetCurrentLineWidth( -1 );
// Plot board outlines and drill map
plotDrillMarks( plotter );
// Print a list of symbols used.
int charSize = 3 * IU_PER_MM; // text size in IUs
double charScale = 1.0 / scale; // real scale will be 1/scale,
// because the global plot scale is scale
TextWidth = KiROUND( (charSize * charScale) / 10.0 ); // Set text width (thickness)
intervalle = KiROUND( charSize * charScale ) + TextWidth;
// Trace information.
plotX = KiROUND( bbbox.GetX() + textmarginaftersymbol * charScale );
plotY = bbbox.GetBottom() + intervalle;
// Plot title "Info"
wxString Text = wxT( "Drill Map:" );
plotter->Text( wxPoint( plotX, plotY ), COLOR4D::UNSPECIFIED, Text, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
for( unsigned ii = 0; ii < m_toolListBuffer.size(); ii++ )
{
DRILL_TOOL& tool = m_toolListBuffer[ii];
if( tool.m_TotalCount == 0 )
continue;
plotY += intervalle;
int plot_diam = KiROUND( tool.m_Diameter );
x = KiROUND( plotX - textmarginaftersymbol * charScale - plot_diam / 2.0 );
y = KiROUND( plotY + charSize * charScale );
plotter->Marker( wxPoint( x, y ), plot_diam, ii );
// List the diameter of each drill in mm and inches.
sprintf( line, "%2.2fmm / %2.3f\" ",
diameter_in_mm( tool.m_Diameter ),
diameter_in_inches( tool.m_Diameter ) );
msg = FROM_UTF8( line );
// Now list how many holes and ovals are associated with each drill.
if( ( tool.m_TotalCount == 1 )
&& ( tool.m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if( tool.m_TotalCount == 1 ) // && ( toolm_OvalCount == 1 )
sprintf( line, "(1 slot)" );
else if( tool.m_OvalCount == 0 )
sprintf( line, "(%d holes)", tool.m_TotalCount );
else if( tool.m_OvalCount == 1 )
sprintf( line, "(%d holes + 1 slot)", tool.m_TotalCount - 1 );
else // if ( toolm_OvalCount > 1 )
sprintf( line, "(%d holes + %d slots)",
tool.m_TotalCount - tool.m_OvalCount,
tool.m_OvalCount );
msg += FROM_UTF8( line );
if( tool.m_Hole_NotPlated )
msg += wxT( " (not plated)" );
plotter->Text( wxPoint( plotX, y ), COLOR4D::UNSPECIFIED, msg, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
intervalle = KiROUND( ( ( charSize * charScale ) + TextWidth ) * 1.2 );
if( intervalle < ( plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth ) )
intervalle = plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth;
}
plotter->EndPlot();
delete plotter;
return true;
}
/*
* Note 1: polygons are drawm using outlines witk a thickness = aMinThicknessValue
* so shapes must take in account this outline thickness
*
* Note 2:
* Trapezoidal pads are not considered here because they are very special case
* and are used in microwave applications and they *DO NOT* have a thermal relief that
* change the shape by creating stubs and destroy their properties.
*/
void CreateThermalReliefPadPolygon( SHAPE_POLY_SET& aCornerBuffer,
const D_PAD& aPad,
int aThermalGap,
int aCopperThickness,
int aMinThicknessValue,
int aError,
double aThermalRot )
{
wxPoint corner, corner_end;
wxSize copper_thickness;
wxPoint padShapePos = aPad.ShapePos(); // Note: for pad having a shape offset,
// the pad position is NOT the shape position
/* Keep in account the polygon outline thickness
* aThermalGap must be increased by aMinThicknessValue/2 because drawing external outline
* with a thickness of aMinThicknessValue will reduce gap by aMinThicknessValue/2
*/
aThermalGap += aMinThicknessValue / 2;
/* Keep in account the polygon outline thickness
* copper_thickness must be decreased by aMinThicknessValue because drawing outlines
* with a thickness of aMinThicknessValue will increase real thickness by aMinThicknessValue
*/
int dx = aPad.GetSize().x / 2;
int dy = aPad.GetSize().y / 2;
copper_thickness.x = std::min( aPad.GetSize().x, aCopperThickness ) - aMinThicknessValue;
copper_thickness.y = std::min( aPad.GetSize().y, aCopperThickness ) - aMinThicknessValue;
if( copper_thickness.x < 0 )
copper_thickness.x = 0;
if( copper_thickness.y < 0 )
copper_thickness.y = 0;
switch( aPad.GetShape() )
{
case PAD_SHAPE_CIRCLE: // Add 4 similar holes
{
/* we create 4 copper holes and put them in position 1, 2, 3 and 4
* here is the area of the rectangular pad + its thermal gap
* the 4 copper holes remove the copper in order to create the thermal gap
* 4 ------ 1
* | |
* | |
* | |
* | |
* 3 ------ 2
* holes 2, 3, 4 are the same as hole 1, rotated 90, 180, 270 deg
*/
// Build the hole pattern, for the hole in the X >0, Y > 0 plane:
// The pattern roughtly is a 90 deg arc pie
std::vector <wxPoint> corners_buffer;
int numSegs = std::max( GetArcToSegmentCount( dx + aThermalGap, aError, 360.0 ), 6 );
double correction = GetCircletoPolyCorrectionFactor( numSegs );
double delta = 3600.0 / numSegs;
// Radius of outer arcs of the shape corrected for arc approximation by lines
int outer_radius = KiROUND( ( dx + aThermalGap ) * correction );
// Crosspoint of thermal spoke sides, the first point of polygon buffer
corners_buffer.push_back( wxPoint( copper_thickness.x / 2, copper_thickness.y / 2 ) );
// Add an intermediate point on spoke sides, to allow a > 90 deg angle between side
// and first seg of arc approx
corner.x = copper_thickness.x / 2;
int y = outer_radius - (aThermalGap / 4);
corner.y = KiROUND( sqrt( ( (double) y * y - (double) corner.x * corner.x ) ) );
if( aThermalRot != 0 )
corners_buffer.push_back( corner );
// calculate the starting point of the outter arc
corner.x = copper_thickness.x / 2;
corner.y = KiROUND( sqrt( ( (double) outer_radius * outer_radius ) -
( (double) corner.x * corner.x ) ) );
RotatePoint( &corner, 90 ); // 9 degrees is the spoke fillet size
// calculate the ending point of the outer arc
corner_end.x = corner.y;
corner_end.y = corner.x;
// calculate intermediate points (y coordinate from corner.y to corner_end.y
while( (corner.y > corner_end.y) && (corner.x < corner_end.x) )
{
corners_buffer.push_back( corner );
RotatePoint( &corner, delta );
}
corners_buffer.push_back( corner_end );
/* add an intermediate point, to avoid angles < 90 deg between last arc approx line
* and radius line
*/
corner.x = corners_buffer[1].y;
corner.y = corners_buffer[1].x;
corners_buffer.push_back( corner );
// Now, add the 4 holes ( each is the pattern, rotated by 0, 90, 180 and 270 deg
// aThermalRot = 450 (45.0 degrees orientation) work fine.
double angle_pad = aPad.GetOrientation(); // Pad orientation
double th_angle = aThermalRot;
for( unsigned ihole = 0; ihole < 4; ihole++ )
{
aCornerBuffer.NewOutline();
for( unsigned ii = 0; ii < corners_buffer.size(); ii++ )
{
corner = corners_buffer[ii];
RotatePoint( &corner, th_angle + angle_pad ); // Rotate by segment angle and pad orientation
corner += padShapePos;
aCornerBuffer.Append( corner.x, corner.y );
}
th_angle += 900; // Note: th_angle in in 0.1 deg.
}
}
break;
case PAD_SHAPE_OVAL:
{
// Oval pad support along the lines of round and rectangular pads
std::vector <wxPoint> corners_buffer; // Polygon buffer as vector
dx = (aPad.GetSize().x / 2) + aThermalGap; // Cutout radius x
dy = (aPad.GetSize().y / 2) + aThermalGap; // Cutout radius y
wxPoint shape_offset;
// We want to calculate an oval shape with dx > dy.
// if this is not the case, exchange dx and dy, and rotate the shape 90 deg.
int supp_angle = 0;
if( dx < dy )
{
std::swap( dx, dy );
supp_angle = 900;
std::swap( copper_thickness.x, copper_thickness.y );
}
int deltasize = dx - dy; // = distance between shape position and the 2 demi-circle ends centre
// here we have dx > dy
// Radius of outer arcs of the shape:
int outer_radius = dy; // The radius of the outer arc is radius end + aThermalGap
int numSegs = std::max( GetArcToSegmentCount( outer_radius, aError, 360.0 ), 6 );
double delta = 3600.0 / numSegs;
// Some coordinate fiddling, depending on the shape offset direction
shape_offset = wxPoint( deltasize, 0 );
// Crosspoint of thermal spoke sides, the first point of polygon buffer
corner.x = copper_thickness.x / 2;
corner.y = copper_thickness.y / 2;
corners_buffer.push_back( corner );
// Arc start point calculation, the intersecting point of cutout arc and thermal spoke edge
// If copper thickness is more than shape offset, we need to calculate arc intercept point.
if( copper_thickness.x > deltasize )
{
corner.x = copper_thickness.x / 2;
corner.y = KiROUND( sqrt( ( (double) outer_radius * outer_radius ) -
( (double) ( corner.x - delta ) * ( corner.x - deltasize ) ) ) );
corner.x -= deltasize;
/* creates an intermediate point, to have a > 90 deg angle
* between the side and the first segment of arc approximation
*/
wxPoint intpoint = corner;
intpoint.y -= aThermalGap / 4;
corners_buffer.push_back( intpoint + shape_offset );
RotatePoint( &corner, 90 ); // 9 degrees of thermal fillet
}
else
{
corner.x = copper_thickness.x / 2;
corner.y = outer_radius;
corners_buffer.push_back( corner );
}
// Add an intermediate point on spoke sides, to allow a > 90 deg angle between side
// and first seg of arc approx
wxPoint last_corner;
last_corner.y = copper_thickness.y / 2;
int px = outer_radius - (aThermalGap / 4);
last_corner.x =
KiROUND( sqrt( ( ( (double) px * px ) - (double) last_corner.y * last_corner.y ) ) );
// Arc stop point calculation, the intersecting point of cutout arc and thermal spoke edge
corner_end.y = copper_thickness.y / 2;
corner_end.x =
KiROUND( sqrt( ( (double) outer_radius *
outer_radius ) - ( (double) corner_end.y * corner_end.y ) ) );
RotatePoint( &corner_end, -90 ); // 9 degrees of thermal fillet
// calculate intermediate arc points till limit is reached
while( (corner.y > corner_end.y) && (corner.x < corner_end.x) )
{
corners_buffer.push_back( corner + shape_offset );
RotatePoint( &corner, delta );
}
//corners_buffer.push_back(corner + shape_offset); // TODO: about one mil geometry error forms somewhere.
corners_buffer.push_back( corner_end + shape_offset );
corners_buffer.push_back( last_corner + shape_offset ); // Enabling the line above shows intersection point.
/* Create 2 holes, rotated by pad rotation.
*/
double angle = aPad.GetOrientation() + supp_angle;
for( int irect = 0; irect < 2; irect++ )
{
aCornerBuffer.NewOutline();
for( unsigned ic = 0; ic < corners_buffer.size(); ic++ )
{
wxPoint cpos = corners_buffer[ic];
RotatePoint( &cpos, angle );
cpos += padShapePos;
aCornerBuffer.Append( cpos.x, cpos.y );
}
angle = AddAngles( angle, 1800 ); // this is calculate hole 3
}
// Create holes, that are the mirrored from the previous holes
for( unsigned ic = 0; ic < corners_buffer.size(); ic++ )
{
wxPoint swap = corners_buffer[ic];
swap.x = -swap.x;
corners_buffer[ic] = swap;
}
// Now add corner 4 and 2 (2 is the corner 4 rotated by 180 deg
angle = aPad.GetOrientation() + supp_angle;
for( int irect = 0; irect < 2; irect++ )
{
aCornerBuffer.NewOutline();
for( unsigned ic = 0; ic < corners_buffer.size(); ic++ )
{
wxPoint cpos = corners_buffer[ic];
RotatePoint( &cpos, angle );
cpos += padShapePos;
aCornerBuffer.Append( cpos.x, cpos.y );
}
angle = AddAngles( angle, 1800 );
}
}
break;
case PAD_SHAPE_CHAMFERED_RECT:
case PAD_SHAPE_ROUNDRECT: // thermal shape is the same for rectangular shapes.
case PAD_SHAPE_RECT:
{
/* we create 4 copper holes and put them in position 1, 2, 3 and 4
* here is the area of the rectangular pad + its thermal gap
* the 4 copper holes remove the copper in order to create the thermal gap
* 1 ------ 4
* | |
* | |
* | |
* | |
* 2 ------ 3
* hole 3 is the same as hole 1, rotated 180 deg
* hole 4 is the same as hole 2, rotated 180 deg and is the same as hole 1, mirrored
*/
// First, create a rectangular hole for position 1 :
// 2 ------- 3
// | |
// | |
// | |
// 1 -------4
// Modified rectangles with one corner rounded. TODO: merging with oval thermals
// and possibly round too.
std::vector <wxPoint> corners_buffer; // Polygon buffer as vector
dx = (aPad.GetSize().x / 2) + aThermalGap; // Cutout radius x
dy = (aPad.GetSize().y / 2) + aThermalGap; // Cutout radius y
// calculation is optimized for pad shape with dy >= dx (vertical rectangle).
// if it is not the case, just rotate this shape 90 degrees:
double angle = aPad.GetOrientation();
wxPoint corner_origin_pos( -aPad.GetSize().x / 2, -aPad.GetSize().y / 2 );
if( dy < dx )
{
std::swap( dx, dy );
std::swap( copper_thickness.x, copper_thickness.y );
std::swap( corner_origin_pos.x, corner_origin_pos.y );
angle += 900.0;
}
// Now calculate the hole pattern in position 1 ( top left pad corner )
// The first point of polygon buffer is left lower corner, second the crosspoint of
// thermal spoke sides, the third is upper right corner and the rest are rounding
// vertices going anticlockwise. Note the inverted Y-axis in corners_buffer y coordinates.
wxPoint arc_end_point( -dx, -(aThermalGap / 4 + copper_thickness.y / 2) );
corners_buffer.push_back( arc_end_point ); // Adds small miters to zone
corners_buffer.push_back( wxPoint( -(dx - aThermalGap / 4), -copper_thickness.y / 2 ) ); // fill and spoke corner
corners_buffer.push_back( wxPoint( -copper_thickness.x / 2, -copper_thickness.y / 2 ) );
corners_buffer.push_back( wxPoint( -copper_thickness.x / 2, -(dy - aThermalGap / 4) ) );
// The first point to build the rounded corner:
wxPoint arc_start_point( -(aThermalGap / 4 + copper_thickness.x / 2) , -dy );
corners_buffer.push_back( arc_start_point );
int numSegs = std::max( GetArcToSegmentCount( aThermalGap, aError, 360.0 ), 6 );
double correction = GetCircletoPolyCorrectionFactor( numSegs );
int rounding_radius = KiROUND( aThermalGap * correction ); // Corner rounding radius
// Calculate arc angle parameters.
// the start angle id near 900 decidegrees, the final angle is near 1800.0 decidegrees.
double arc_increment = 3600.0 / numSegs;
// the arc_angle_start is 900.0 or slighly more, depending on the actual arc starting point
double arc_angle_start = atan2( -arc_start_point.y -corner_origin_pos.y, arc_start_point.x - corner_origin_pos.x ) * 1800/M_PI;
if( arc_angle_start < 900.0 )
arc_angle_start = 900.0;
bool first_point = true;
for( double curr_angle = arc_angle_start; ; curr_angle += arc_increment )
{
wxPoint corner_position = wxPoint( rounding_radius, 0 );
RotatePoint( &corner_position, curr_angle ); // Rounding vector rotation
corner_position += corner_origin_pos; // Rounding vector + Pad corner offset
// The arc angle is <= 90 degrees, therefore the arc is finished if the x coordinate
// decrease or the y coordinate is smaller than the y end point
if( !first_point &&
( corner_position.x >= corners_buffer.back().x || corner_position.y > arc_end_point.y ) )
break;
first_point = false;
// Note: for hole in position 1, arc x coordinate is always < x starting point
// and arc y coordinate is always <= y ending point
if( corner_position != corners_buffer.back() // avoid duplicate corners.
&& corner_position.x <= arc_start_point.x ) // skip current point at the right of the starting point
corners_buffer.push_back( corner_position );
}
for( int irect = 0; irect < 2; irect++ )
{
aCornerBuffer.NewOutline();
for( unsigned ic = 0; ic < corners_buffer.size(); ic++ )
{
wxPoint cpos = corners_buffer[ic];
RotatePoint( &cpos, angle ); // Rotate according to module orientation
cpos += padShapePos; // Shift origin to position
aCornerBuffer.Append( cpos.x, cpos.y );
}
angle = AddAngles( angle, 1800 ); // this is calculate hole 3
}
// Create holes, that are the mirrored from the previous holes
for( unsigned ic = 0; ic < corners_buffer.size(); ic++ )
{
wxPoint swap = corners_buffer[ic];
swap.x = -swap.x;
corners_buffer[ic] = swap;
}
// Now add corner 4 and 2 (2 is the corner 4 rotated by 180 deg
for( int irect = 0; irect < 2; irect++ )
{
aCornerBuffer.NewOutline();
for( unsigned ic = 0; ic < corners_buffer.size(); ic++ )
{
wxPoint cpos = corners_buffer[ic];
RotatePoint( &cpos, angle );
cpos += padShapePos;
aCornerBuffer.Append( cpos.x, cpos.y );
}
angle = AddAngles( angle, 1800 );
}
}
break;
case PAD_SHAPE_TRAPEZOID:
{
SHAPE_POLY_SET antipad; // The full antipad area
// We need a length to build the stubs of the thermal reliefs
// the value is not very important. The pad bounding box gives a reasonable value
EDA_RECT bbox = aPad.GetBoundingBox();
int stub_len = std::max( bbox.GetWidth(), bbox.GetHeight() );
aPad.TransformShapeWithClearanceToPolygon( antipad, aThermalGap );
SHAPE_POLY_SET stub; // A basic stub ( a rectangle)
SHAPE_POLY_SET stubs; // the full stubs shape
// We now substract the stubs (connections to the copper zone)
//ClipperLib::Clipper clip_engine;
// Prepare a clipping transform
//clip_engine.AddPath( antipad, ClipperLib::ptSubject, true );
// Create stubs and add them to clipper engine
wxPoint stubBuffer[4];
stubBuffer[0].x = stub_len;
stubBuffer[0].y = copper_thickness.y/2;
stubBuffer[1] = stubBuffer[0];
stubBuffer[1].y = -copper_thickness.y/2;
stubBuffer[2] = stubBuffer[1];
stubBuffer[2].x = -stub_len;
stubBuffer[3] = stubBuffer[2];
stubBuffer[3].y = copper_thickness.y/2;
stub.NewOutline();
for( unsigned ii = 0; ii < arrayDim( stubBuffer ); ii++ )
{
wxPoint cpos = stubBuffer[ii];
RotatePoint( &cpos, aPad.GetOrientation() );
cpos += padShapePos;
stub.Append( cpos.x, cpos.y );
}
stubs.Append( stub );
stubBuffer[0].y = stub_len;
stubBuffer[0].x = copper_thickness.x/2;
stubBuffer[1] = stubBuffer[0];
stubBuffer[1].x = -copper_thickness.x/2;
stubBuffer[2] = stubBuffer[1];
stubBuffer[2].y = -stub_len;
stubBuffer[3] = stubBuffer[2];
stubBuffer[3].x = copper_thickness.x/2;
stub.RemoveAllContours();
stub.NewOutline();
for( unsigned ii = 0; ii < arrayDim( stubBuffer ); ii++ )
{
wxPoint cpos = stubBuffer[ii];
RotatePoint( &cpos, aPad.GetOrientation() );
cpos += padShapePos;
stub.Append( cpos.x, cpos.y );
}
stubs.Append( stub );
stubs.Simplify( SHAPE_POLY_SET::PM_FAST );
antipad.BooleanSubtract( stubs, SHAPE_POLY_SET::PM_FAST );
aCornerBuffer.Append( antipad );
break;
}
default:
;
}
}
/**
* Function PlaceCells
* Initialize the matrix routing by setting obstacles for each occupied cell
* a cell set to HOLE is an obstacle for tracks and vias
* a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
* a cell set to CELL_is_EDGE is a frontier.
* Tracks and vias having the same net code as net_code are skipped
* (htey do not are obstacles)
*
* For single-sided Routing 1:
* BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
*
* If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
*/
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
int ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
int marge, via_marge;
LAYER_MSK layerMask;
// use the default NETCLASS?
NETCLASS* nc = aPcb->m_NetClasses.GetDefault();
int trackWidth = nc->GetTrackWidth();
int clearance = nc->GetClearance();
int viaSize = nc->GetViaDiameter();
marge = clearance + (trackWidth / 2);
via_marge = clearance + (viaSize / 2);
// Place PADS on matrix routing:
for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
{
D_PAD* pad = aPcb->GetPad( i );
if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
{
::PlacePad( pad, HOLE, marge, WRITE_CELL );
}
::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Place outlines of modules on matrix routing, if they are on a copper layer
// or on the edge layer
TRACK tmpSegm( NULL ); // A dummy track used to create segments.
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
tmpSegm.SetLayer( edge->GetLayer() );
if( tmpSegm.GetLayer() == EDGE_N )
tmpSegm.SetLayer( UNDEFINED_LAYER );
tmpSegm.SetStart( edge->GetStart() );
tmpSegm.SetEnd( edge->GetEnd() );
tmpSegm.SetShape( edge->GetShape() );
tmpSegm.SetWidth( edge->GetWidth() );
tmpSegm.m_Param = edge->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
break;
default:
break;
}
}
}
// Place board outlines and texts on copper layers:
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
{
DRAWSEGMENT* DrawSegm;
int type_cell = HOLE;
DrawSegm = (DRAWSEGMENT*) item;
tmpSegm.SetLayer( DrawSegm->GetLayer() );
if( DrawSegm->GetLayer() == EDGE_N )
{
tmpSegm.SetLayer( UNDEFINED_LAYER );
type_cell |= CELL_is_EDGE;
}
tmpSegm.SetStart( DrawSegm->GetStart() );
tmpSegm.SetEnd( DrawSegm->GetEnd() );
tmpSegm.SetShape( DrawSegm->GetShape() );
tmpSegm.SetWidth( DrawSegm->GetWidth() );
tmpSegm.m_Param = DrawSegm->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, type_cell, marge, WRITE_CELL );
}
break;
case PCB_TEXT_T:
{
TEXTE_PCB* PtText;
PtText = (TEXTE_PCB*) item;
if( PtText->GetText().Length() == 0 )
break;
EDA_RECT textbox = PtText->GetTextBox( -1 );
ux0 = textbox.GetX();
uy0 = textbox.GetY();
dx = textbox.GetWidth();
dy = textbox.GetHeight();
/* Put bounding box (rectangle) on matrix */
dx /= 2;
dy /= 2;
ux1 = ux0 + dx;
uy1 = uy0 + dy;
ux0 -= dx;
uy0 -= dy;
layerMask = GetLayerMask( PtText->GetLayer() );
TraceFilledRectangle( ux0 - marge, uy0 - marge, ux1 + marge,
uy1 + marge, PtText->GetOrientation(),
layerMask, HOLE, WRITE_CELL );
TraceFilledRectangle( ux0 - via_marge, uy0 - via_marge,
ux1 + via_marge, uy1 + via_marge,
PtText->GetOrientation(),
layerMask, VIA_IMPOSSIBLE, WRITE_OR_CELL );
}
break;
default:
break;
}
}
/* Put tracks and vias on matrix */
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( net_code == track->GetNet() )
continue;
TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
}
/* Function to move components in a rectangular area format 4 / 3,
* starting from the mouse cursor.
* Footprints are grouped by sheet.
* Components with the LOCKED status set are not moved
*/
void PCB_EDIT_FRAME::SpreadFootprints( std::vector<MODULE*>* aFootprints,
bool aMoveFootprintsOutsideBoardOnly,
bool aCheckForBoardEdges,
wxPoint aSpreadAreaPosition,
bool aPrepareUndoCommand )
{
EDA_RECT bbox = GetBoard()->GetBoardEdgesBoundingBox();
bool edgesExist = bbox.GetWidth() || bbox.GetHeight();
// if aFootprintsOutsideBoardOnly is true, and if board outline exists,
// we have to filter footprints to move:
bool outsideBrdFilter = aMoveFootprintsOutsideBoardOnly && edgesExist;
// no edges exist
if( aMoveFootprintsOutsideBoardOnly && !edgesExist )
{
DisplayError( this,
_( "Could not automatically place footprints. No board outlines detected." ) );
return;
}
// Build candidate list
// calculate also the area needed by these footprints
std::vector <MODULE*> footprintList;
for( MODULE* footprint : *aFootprints )
{
footprint->CalculateBoundingBox();
if( outsideBrdFilter )
{
if( bbox.Contains( footprint->GetPosition() ) )
continue;
}
if( footprint->IsLocked() )
continue;
footprintList.push_back( footprint );
}
if( footprintList.empty() )
return;
// sort footprints by sheet path. we group them later by sheet
sort( footprintList.begin(), footprintList.end(), sortFootprintsbySheetPath );
// Undo command: init undo list. If aPrepareUndoCommand == false
// no undo command will be initialized.
// Useful when a undo command is already initialized by the caller
PICKED_ITEMS_LIST undoList;
if( aPrepareUndoCommand )
{
undoList.m_Status = UR_CHANGED;
ITEM_PICKER picker( NULL, UR_CHANGED );
for( MODULE* footprint : footprintList )
{
// Undo: add copy of the footprint to undo list
picker.SetItem( footprint );
picker.SetLink( footprint->Clone() );
undoList.PushItem( picker );
}
}
// Extract and place footprints by sheet
std::vector <MODULE*> footprintListBySheet;
std::vector <EDA_RECT> placementSheetAreas;
double subsurface;
double placementsurface = 0.0;
// put the placement area position on mouse cursor.
// this position will be adjusted later
wxPoint placementAreaPosition = aSpreadAreaPosition;
// We sometimes do not want to move footprints inside an existing board.
// Therefore, move the placement area position outside the board bounding box
// to the left of the board
if( aCheckForBoardEdges && edgesExist )
{
if( placementAreaPosition.x < bbox.GetEnd().x &&
placementAreaPosition.y < bbox.GetEnd().y )
{
// the placement area could overlap the board
// move its position to a safe location
placementAreaPosition.x = bbox.GetEnd().x;
placementAreaPosition.y = bbox.GetOrigin().y;
}
}
// The placement uses 2 passes:
// the first pass creates the rectangular areas to place footprints
// each sheet in schematic creates one rectangular area.
// the second pass moves footprints inside these areas
MODULE* footprint;
for( int pass = 0; pass < 2; pass++ )
{
int subareaIdx = 0;
footprintListBySheet.clear();
subsurface = 0.0;
for( unsigned ii = 0; ii < footprintList.size(); ii++ )
{
footprint = footprintList[ii];
bool islastItem = false;
if( ii == footprintList.size() - 1 ||
( footprintList[ii]->GetPath().BeforeLast( '/' ) !=
footprintList[ii+1]->GetPath().BeforeLast( '/' ) ) )
islastItem = true;
footprintListBySheet.push_back( footprint );
subsurface += footprint->GetArea( PADDING );
if( islastItem )
{
// end of the footprint sublist relative to the same sheet path
// calculate placement of the current sublist
EDA_RECT freeArea;
int Xsize_allowed = (int) ( sqrt( subsurface ) * 4.0 / 3.0 );
int Ysize_allowed = (int) ( subsurface / Xsize_allowed );
freeArea.SetWidth( Xsize_allowed );
freeArea.SetHeight( Ysize_allowed );
CRectPlacement placementArea;
if( pass == 1 )
{
wxPoint areapos = placementSheetAreas[subareaIdx].GetOrigin()
+ placementAreaPosition;
freeArea.SetOrigin( areapos );
}
bool findAreaOnly = pass == 0;
moveFootprintsInArea( placementArea, footprintListBySheet,
freeArea, findAreaOnly );
if( pass == 0 )
{
// Populate sheet placement areas list
EDA_RECT sub_area;
sub_area.SetWidth( placementArea.GetW()*scale );
sub_area.SetHeight( placementArea.GetH()*scale );
// Add a margin around the sheet placement area:
sub_area.Inflate( Millimeter2iu( 1.5 ) );
placementSheetAreas.push_back( sub_area );
placementsurface += (double) sub_area.GetWidth()*
sub_area.GetHeight();
}
// Prepare buffers for next sheet
subsurface = 0.0;
footprintListBySheet.clear();
subareaIdx++;
}
}
// End of pass:
// At the end of the first pass, we have to find position of each sheet
// placement area
if( pass == 0 )
{
int Xsize_allowed = (int) ( sqrt( placementsurface ) * 4.0 / 3.0 );
int Ysize_allowed = (int) ( placementsurface / Xsize_allowed );
CRectPlacement placementArea;
CSubRectArray vecSubRects;
fillRectList( vecSubRects, placementSheetAreas );
spreadRectangles( placementArea, vecSubRects, Xsize_allowed, Ysize_allowed );
for( unsigned it = 0; it < vecSubRects.size(); ++it )
{
TSubRect& srect = vecSubRects[it];
wxPoint pos( srect.x*scale, srect.y*scale );
wxSize size( srect.w*scale, srect.h*scale );
placementSheetAreas[srect.n].SetOrigin( pos );
placementSheetAreas[srect.n].SetSize( size );
}
}
} // End pass
// Undo: commit list
if( aPrepareUndoCommand )
SaveCopyInUndoList( undoList, UR_CHANGED );
OnModify();
m_canvas->Refresh();
}
void BOARD_PRINTOUT_CONTROLLER::DrawPage()
{
wxPoint offset;
double userscale;
EDA_RECT boardBoundingBox;
EDA_RECT drawRect;
wxDC* dc = GetDC();
BASE_SCREEN* screen = m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxSize pageSizeIU = m_Parent->GetPageSizeIU();
wxBusyCursor dummy;
boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox();
wxString titleblockFilename; // TODO see if we uses the gerber file name
// Use the page size as the drawing area when the board is shown or the user scale
// is less than 1.
if( m_PrintParams.PrintBorderAndTitleBlock() )
boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU );
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( m_PrintParams.m_PrintScale == 0 ) // fit in page option
{
if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight())
{
int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings
double scaleX = (double)(pageSizeIU.x - (2 * margin)) /
boardBoundingBox.GetWidth();
double scaleY = (double)(pageSizeIU.y - (2 * margin)) /
boardBoundingBox.GetHeight();
userscale = (scaleX < scaleY) ? scaleX : scaleY;
}
else
userscale = 1.0;
}
wxSize scaledPageSize = pageSizeIU;
drawRect.SetSize( scaledPageSize );
scaledPageSize.x = wxRound( scaledPageSize.x / userscale );
scaledPageSize.y = wxRound( scaledPageSize.y / userscale );
if( m_PrintParams.m_PageSetupData )
{
// Always scale to the size of the paper.
FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( m_PrintParams.m_PrintScale == 1.0 )
{
// We want a 1:1 scale, regardless the page setup
// like page size, margin ...
MapScreenSizeToPaper(); // set best scale and offset (scale is not used)
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = (double) w / (IU_PER_MILS*1000);
double accurate_Yscale = (double) h / (IU_PER_MILS*1000);
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= (double)PlotAreaSize.x / w;
accurate_Yscale *= (double)PlotAreaSize.y / h;
}
// Fine scale adjust
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Set print scale for 1:1 exact scale
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale( &scalex, &scaley );
// In some cases the plot origin is the centre of the board outline rather than the center
// of the selected paper size.
if( m_PrintParams.CenterOnBoardOutline() )
{
// Here we are only drawing the board and it's contents.
drawRect = boardBoundingBox;
offset.x += wxRound( (double) -scaledPageSize.x / 2.0 );
offset.y += wxRound( (double) -scaledPageSize.y / 2.0 );
wxPoint center = boardBoundingBox.Centre();
if( printMirror )
{
// Calculate the mirrored center of the board.
center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x;
}
offset += center;
}
GRResetPenAndBrush( dc );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
screen->m_IsPrinting = true;
EDA_COLOR_T bg_color = m_Parent->GetDrawBgColor();
// Print frame reference, if requested, before printing draw layers
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
if( m_PrintParams.PrintBorderAndTitleBlock() )
m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
IU_PER_MILS, titleblockFilename );
if( printMirror )
{
// To plot mirror, we reverse the x axis, and modify the plot x origin
dc->SetAxisOrientation( false, false );
/* Change plot offset in order to have the draw area at the same location.
* The plot origin X is just moved from 0 to PlotAreaSizeInPixels.x.
* just set offset x at PlotAreaSizeInPixels.x.
*/
int x_dc_offset = PlotAreaSizeInPixels.x;
x_dc_offset = KiROUND( x_dc_offset * userscale );
dc->SetDeviceOrigin( x_dc_offset, 0 );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE / 2, -MAX_VALUE / 2 ),
panel->GetClipBox()->GetSize() ) );
}
// screen->m_DrawOrg = offset;
dc->SetLogicalOrigin( offset.x, offset.y );
m_Parent->SetDrawBgColor( WHITE );
// Never force black pen to print draw layers
// because negative objects need a white pen, not a black pen
// B&W mode is handled in print page function
GRForceBlackPen( false );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
m_Parent->SetDrawBgColor( bg_color );
screen->m_IsPrinting = false;
panel->SetClipBox( tmp );
}
