/* Place module on Routing matrix.
*/
void genModuleOnRoutingMatrix( MODULE* Module )
{
int ox, oy, fx, fy;
int layerMask;
D_PAD* Pad;
EDA_RECT fpBBox = Module->GetBoundingBox();
fpBBox.Inflate( RoutingMatrix.m_GridRouting / 2 );
ox = fpBBox.GetX();
fx = fpBBox.GetRight();
oy = fpBBox.GetY();
fy = fpBBox.GetBottom();
if( ox < RoutingMatrix.m_BrdBox.GetX() )
ox = RoutingMatrix.m_BrdBox.GetX();
if( ox > RoutingMatrix.m_BrdBox.GetRight() )
ox = RoutingMatrix.m_BrdBox.GetRight();
if( fx < RoutingMatrix.m_BrdBox.GetX() )
fx = RoutingMatrix.m_BrdBox.GetX();
if( fx > RoutingMatrix.m_BrdBox.GetRight() )
fx = RoutingMatrix.m_BrdBox.GetRight();
if( oy < RoutingMatrix.m_BrdBox.GetY() )
oy = RoutingMatrix.m_BrdBox.GetY();
if( oy > RoutingMatrix.m_BrdBox.GetBottom() )
oy = RoutingMatrix.m_BrdBox.GetBottom();
if( fy < RoutingMatrix.m_BrdBox.GetY() )
fy = RoutingMatrix.m_BrdBox.GetY();
if( fy > RoutingMatrix.m_BrdBox.GetBottom() )
fy = RoutingMatrix.m_BrdBox.GetBottom();
layerMask = 0;
if( Module->GetLayer() == LAYER_N_FRONT )
layerMask = LAYER_FRONT;
if( Module->GetLayer() == LAYER_N_BACK )
layerMask = LAYER_BACK;
TraceFilledRectangle( ox, oy, fx, fy, layerMask,
CELL_is_MODULE, WRITE_OR_CELL );
// Trace pads + clearance areas.
for( Pad = Module->Pads(); Pad != NULL; Pad = Pad->Next() )
{
int margin = (RoutingMatrix.m_GridRouting / 2) + Pad->GetClearance();
::PlacePad( Pad, CELL_is_MODULE, margin, WRITE_OR_CELL );
}
// Trace clearance.
int margin = ( RoutingMatrix.m_GridRouting * Module->GetPadCount() ) / GAIN;
CreateKeepOutRectangle( ox, oy, fx, fy, margin, KEEP_OUT_MARGIN, layerMask );
}
const EDA_RECT DIMENSION::GetBoundingBox() const
{
EDA_RECT bBox;
int xmin, xmax, ymin, ymax;
bBox = m_Text.GetTextBox( -1 );
xmin = bBox.GetX();
xmax = bBox.GetRight();
ymin = bBox.GetY();
ymax = bBox.GetBottom();
xmin = std::min( xmin, m_crossBarO.x );
xmin = std::min( xmin, m_crossBarF.x );
ymin = std::min( ymin, m_crossBarO.y );
ymin = std::min( ymin, m_crossBarF.y );
xmax = std::max( xmax, m_crossBarO.x );
xmax = std::max( xmax, m_crossBarF.x );
ymax = std::max( ymax, m_crossBarO.y );
ymax = std::max( ymax, m_crossBarF.y );
xmin = std::min( xmin, m_featureLineGO.x );
xmin = std::min( xmin, m_featureLineGF.x );
ymin = std::min( ymin, m_featureLineGO.y );
ymin = std::min( ymin, m_featureLineGF.y );
xmax = std::max( xmax, m_featureLineGO.x );
xmax = std::max( xmax, m_featureLineGF.x );
ymax = std::max( ymax, m_featureLineGO.y );
ymax = std::max( ymax, m_featureLineGF.y );
xmin = std::min( xmin, m_featureLineDO.x );
xmin = std::min( xmin, m_featureLineDF.x );
ymin = std::min( ymin, m_featureLineDO.y );
ymin = std::min( ymin, m_featureLineDF.y );
xmax = std::max( xmax, m_featureLineDO.x );
xmax = std::max( xmax, m_featureLineDF.x );
ymax = std::max( ymax, m_featureLineDO.y );
ymax = std::max( ymax, m_featureLineDF.y );
bBox.SetX( xmin );
bBox.SetY( ymin );
bBox.SetWidth( xmax - xmin + 1 );
bBox.SetHeight( ymax - ymin + 1 );
bBox.Normalize();
return bBox;
}
void EDA_DRAW_PANEL::RefreshDrawingRect( const EDA_RECT& aRect, bool aEraseBackground )
{
INSTALL_UNBUFFERED_DC( dc, this );
wxRect rect = aRect;
rect.x = dc.LogicalToDeviceX( rect.x );
rect.y = dc.LogicalToDeviceY( rect.y );
rect.width = dc.LogicalToDeviceXRel( rect.width );
rect.height = dc.LogicalToDeviceYRel( rect.height );
wxLogTrace( kicadTraceCoords,
wxT( "Refresh area: drawing (%d, %d, %d, %d), device (%d, %d, %d, %d)" ),
aRect.GetX(), aRect.GetY(), aRect.GetWidth(), aRect.GetHeight(),
rect.x, rect.y, rect.width, rect.height );
RefreshRect( rect, aEraseBackground );
}
EDA_RECT EDA_TEXT::GetTextBox( int aLine, int aThickness, bool aInvertY ) const
{
EDA_RECT rect;
wxPoint pos;
wxArrayString strings;
wxString text = GetShownText();
int thickness = ( aThickness < 0 ) ? m_Thickness : aThickness;
int linecount = 1;
if( m_MultilineAllowed )
{
wxStringSplit( text, strings, '\n' );
if ( strings.GetCount() ) // GetCount() == 0 for void strings
{
if( aLine >= 0 && (aLine < (int)strings.GetCount()) )
text = strings.Item( aLine );
else
text = strings.Item( 0 );
linecount = strings.GetCount();
}
}
// calculate the H and V size
int dx = LenSize( text );
int dy = GetInterline( aThickness );
// Creates bounding box (rectangle) for an horizontal text
wxSize textsize = wxSize( dx, dy );
if( aInvertY )
rect.SetOrigin( m_Pos.x, -m_Pos.y );
else
rect.SetOrigin( m_Pos );
// extra dy interval for letters like j and y and ]
int extra_dy = dy - m_Size.y;
rect.Move( wxPoint( 0, -extra_dy / 2 ) ); // move origin by the half extra interval
// for multiline texts and aLine < 0, merge all rectangles
if( m_MultilineAllowed && aLine < 0 )
{
for( unsigned ii = 1; ii < strings.GetCount(); ii++ )
{
text = strings.Item( ii );
dx = LenSize( text );
textsize.x = std::max( textsize.x, dx );
textsize.y += dy;
}
}
rect.SetSize( textsize );
/* Now, calculate the rect origin, according to text justification
* At this point the rectangle origin is the text origin (m_Pos).
* This is true only for left and top text justified texts (using top to bottom Y axis
* orientation). and must be recalculated for others justifications
* also, note the V justification is relative to the first line
*/
switch( m_HJustify )
{
case GR_TEXT_HJUSTIFY_LEFT:
if( m_Mirror )
rect.SetX( rect.GetX() - rect.GetWidth() );
break;
case GR_TEXT_HJUSTIFY_CENTER:
rect.SetX( rect.GetX() - (rect.GetWidth() / 2) );
break;
case GR_TEXT_HJUSTIFY_RIGHT:
if( !m_Mirror )
rect.SetX( rect.GetX() - rect.GetWidth() );
break;
}
dy = m_Size.y + thickness;
switch( m_VJustify )
{
case GR_TEXT_VJUSTIFY_TOP:
break;
case GR_TEXT_VJUSTIFY_CENTER:
rect.SetY( rect.GetY() - ( dy / 2) );
break;
case GR_TEXT_VJUSTIFY_BOTTOM:
rect.SetY( rect.GetY() - dy );
break;
}
if( linecount > 1 )
{
int yoffset;
linecount -= 1;
switch( m_VJustify )
{
case GR_TEXT_VJUSTIFY_TOP:
break;
case GR_TEXT_VJUSTIFY_CENTER:
yoffset = linecount * GetInterline() / 2;
rect.SetY( rect.GetY() - yoffset );
break;
case GR_TEXT_VJUSTIFY_BOTTOM:
yoffset = linecount * GetInterline( aThickness );
rect.SetY( rect.GetY() - yoffset );
break;
}
}
rect.Inflate( thickness / 2 );
rect.Normalize(); // Make h and v sizes always >= 0
return rect;
}
void BOARD_PRINTOUT_CONTROLLER::DrawPage()
{
wxPoint offset;
double userscale;
EDA_RECT boardBoundingBox;
EDA_RECT drawRect;
wxDC* dc = GetDC();
BASE_SCREEN* screen = m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxSize pageSizeIU = m_Parent->GetPageSizeIU();
wxBusyCursor dummy;
#if defined (PCBNEW)
BOARD * brd = ((PCB_BASE_FRAME*) m_Parent)->GetBoard();
boardBoundingBox = brd->ComputeBoundingBox();
wxString titleblockFilename = brd->GetFileName();
#elif defined (GERBVIEW)
boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox();
wxString titleblockFilename; // TODO see if we uses the gerber file name
#else
#error BOARD_PRINTOUT_CONTROLLER::DrawPage() works only for PCBNEW or GERBVIEW
#endif
// Use the page size as the drawing area when the board is shown or the user scale
// is less than 1.
if( m_PrintParams.PrintBorderAndTitleBlock() )
boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU );
wxLogTrace( tracePrinting, wxT( "Drawing bounding box: x=%d, y=%d, w=%d, h=%d" ),
boardBoundingBox.GetX(), boardBoundingBox.GetY(),
boardBoundingBox.GetWidth(), boardBoundingBox.GetHeight() );
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( m_PrintParams.m_PrintScale == 0 ) // fit in page option
{
if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight())
{
int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings
double scaleX = (double)(pageSizeIU.x - (2 * margin)) /
boardBoundingBox.GetWidth();
double scaleY = (double)(pageSizeIU.y - (2 * margin)) /
boardBoundingBox.GetHeight();
userscale = (scaleX < scaleY) ? scaleX : scaleY;
}
else
userscale = 1.0;
}
wxSize scaledPageSize = pageSizeIU;
drawRect.SetSize( scaledPageSize );
scaledPageSize.x = wxRound( scaledPageSize.x / userscale );
scaledPageSize.y = wxRound( scaledPageSize.y / userscale );
if( m_PrintParams.m_PageSetupData )
{
wxLogTrace( tracePrinting, wxT( "Fit size to page margins: x=%d, y=%d" ),
scaledPageSize.x, scaledPageSize.y );
// Always scale to the size of the paper.
FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( m_PrintParams.m_PrintScale == 1.0 )
{
// We want a 1:1 scale, regardless the page setup
// like page size, margin ...
MapScreenSizeToPaper(); // set best scale and offset (scale is not used)
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = (double) w / (IU_PER_MILS*1000);
double accurate_Yscale = (double) h / (IU_PER_MILS*1000);
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= (double)PlotAreaSize.x / w;
accurate_Yscale *= (double)PlotAreaSize.y / h;
}
// Fine scale adjust
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Set print scale for 1:1 exact scale
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
wxLogTrace( tracePrinting, wxT( "Plot area in pixels: x=%d, y=%d" ),
PlotAreaSizeInPixels.x, PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale( &scalex, &scaley );
wxLogTrace( tracePrinting, wxT( "DC user scale: x=%g, y=%g" ),
scalex, scaley );
wxSize PlotAreaSizeInUserUnits;
PlotAreaSizeInUserUnits.x = KiROUND( PlotAreaSizeInPixels.x / scalex );
PlotAreaSizeInUserUnits.y = KiROUND( PlotAreaSizeInPixels.y / scaley );
wxLogTrace( tracePrinting, wxT( "Scaled plot area in user units: x=%d, y=%d" ),
PlotAreaSizeInUserUnits.x, PlotAreaSizeInUserUnits.y );
// In module editor, the module is located at 0,0 but for printing
// it is moved to pageSizeIU.x/2, pageSizeIU.y/2.
// So the equivalent board must be moved to the center of the page:
if( m_Parent->IsType( MODULE_EDITOR_FRAME_TYPE ) )
{
boardBoundingBox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) );
}
// In some cases the plot origin is the centre of the board outline rather than the center
// of the selected paper size.
if( m_PrintParams.CenterOnBoardOutline() )
{
// Here we are only drawing the board and it's contents.
drawRect = boardBoundingBox;
offset.x += wxRound( (double) -scaledPageSize.x / 2.0 );
offset.y += wxRound( (double) -scaledPageSize.y / 2.0 );
wxPoint center = boardBoundingBox.Centre();
if( printMirror )
{
// Calculate the mirrored center of the board.
center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x;
}
offset += center;
}
GRResetPenAndBrush( dc );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
screen->m_IsPrinting = true;
EDA_COLOR_T bg_color = g_DrawBgColor;
// Print frame reference, if reqquested, before
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
if( m_PrintParams.PrintBorderAndTitleBlock() )
m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
IU_PER_MILS, titleblockFilename );
if( printMirror )
{
// To plot mirror, we reverse the x axis, and modify the plot x origin
dc->SetAxisOrientation( false, false);
/* Plot offset x is moved by the x plot area size in order to have
* the old draw area in the new draw area, because the draw origin has not moved
* (this is the upper left corner) but the X axis is reversed, therefore the plotting area
* is the x coordinate values from - PlotAreaSize.x to 0 */
int x_dc_offset = PlotAreaSizeInPixels.x;
x_dc_offset = KiROUND( x_dc_offset * userscale );
dc->SetDeviceOrigin( x_dc_offset, 0 );
wxLogTrace( tracePrinting, wxT( "Device origin: x=%d, y=%d" ),
x_dc_offset, 0 );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ),
panel->GetClipBox()->GetSize() ) );
}
// screen->m_DrawOrg = offset;
dc->SetLogicalOrigin( offset.x, offset.y );
wxLogTrace( tracePrinting, wxT( "Logical origin: x=%d, y=%d" ),
offset.x, offset.y );
#if defined(wxUSE_LOG_TRACE) && defined( DEBUG )
wxRect paperRect = GetPaperRectPixels();
wxLogTrace( tracePrinting, wxT( "Paper rectangle: left=%d, top=%d, "
"right=%d, bottom=%d" ),
paperRect.GetLeft(), paperRect.GetTop(), paperRect.GetRight(),
paperRect.GetBottom() );
int devLeft = dc->LogicalToDeviceX( drawRect.GetX() );
int devTop = dc->LogicalToDeviceY( drawRect.GetY() );
int devRight = dc->LogicalToDeviceX( drawRect.GetRight() );
int devBottom = dc->LogicalToDeviceY( drawRect.GetBottom() );
wxLogTrace( tracePrinting, wxT( "Final device rectangle: left=%d, top=%d, "
"right=%d, bottom=%d\n" ),
devLeft, devTop, devRight, devBottom );
#endif
g_DrawBgColor = WHITE;
/* when printing in color mode, we use the graphic OR mode that gives the same look as
* the screen but because the background is white when printing, we must use a trick:
* In order to plot on a white background in OR mode we must:
* 1 - Plot all items in black, this creates a local black background
* 2 - Plot in OR mode on black "local" background
*/
if( !m_PrintParams.m_Print_Black_and_White )
{
// Creates a "local" black background
GRForceBlackPen( true );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer,
printMirror, &m_PrintParams );
GRForceBlackPen( false );
}
else
GRForceBlackPen( true );
#if defined (GERBVIEW)
// In B&W mode, do not force black pen for Gerbview
// because negative objects need a white pen, not a black pen
// B&W mode is handled in print page
GRForceBlackPen( false );
#endif
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror,
&m_PrintParams );
g_DrawBgColor = bg_color;
screen->m_IsPrinting = false;
panel->SetClipBox( tmp );
GRForceBlackPen( false );
}
/**
* Function PlaceCells
* Initialize the matrix routing by setting obstacles for each occupied cell
* a cell set to HOLE is an obstacle for tracks and vias
* a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
* a cell set to CELL_is_EDGE is a frontier.
* Tracks and vias having the same net code as net_code are skipped
* (htey do not are obstacles)
*
* For single-sided Routing 1:
* BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
*
* If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
*/
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
int ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
int marge, via_marge;
LAYER_MSK layerMask;
// use the default NETCLASS?
NETCLASS* nc = aPcb->m_NetClasses.GetDefault();
int trackWidth = nc->GetTrackWidth();
int clearance = nc->GetClearance();
int viaSize = nc->GetViaDiameter();
marge = clearance + (trackWidth / 2);
via_marge = clearance + (viaSize / 2);
// Place PADS on matrix routing:
for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
{
D_PAD* pad = aPcb->GetPad( i );
if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
{
::PlacePad( pad, HOLE, marge, WRITE_CELL );
}
::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Place outlines of modules on matrix routing, if they are on a copper layer
// or on the edge layer
TRACK tmpSegm( NULL ); // A dummy track used to create segments.
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
tmpSegm.SetLayer( edge->GetLayer() );
if( tmpSegm.GetLayer() == EDGE_N )
tmpSegm.SetLayer( UNDEFINED_LAYER );
tmpSegm.SetStart( edge->GetStart() );
tmpSegm.SetEnd( edge->GetEnd() );
tmpSegm.SetShape( edge->GetShape() );
tmpSegm.SetWidth( edge->GetWidth() );
tmpSegm.m_Param = edge->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
break;
default:
break;
}
}
}
// Place board outlines and texts on copper layers:
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
{
DRAWSEGMENT* DrawSegm;
int type_cell = HOLE;
DrawSegm = (DRAWSEGMENT*) item;
tmpSegm.SetLayer( DrawSegm->GetLayer() );
if( DrawSegm->GetLayer() == EDGE_N )
{
tmpSegm.SetLayer( UNDEFINED_LAYER );
type_cell |= CELL_is_EDGE;
}
tmpSegm.SetStart( DrawSegm->GetStart() );
tmpSegm.SetEnd( DrawSegm->GetEnd() );
tmpSegm.SetShape( DrawSegm->GetShape() );
tmpSegm.SetWidth( DrawSegm->GetWidth() );
tmpSegm.m_Param = DrawSegm->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, type_cell, marge, WRITE_CELL );
}
break;
case PCB_TEXT_T:
{
TEXTE_PCB* PtText;
PtText = (TEXTE_PCB*) item;
if( PtText->GetText().Length() == 0 )
break;
EDA_RECT textbox = PtText->GetTextBox( -1 );
ux0 = textbox.GetX();
uy0 = textbox.GetY();
dx = textbox.GetWidth();
dy = textbox.GetHeight();
/* Put bounding box (rectangle) on matrix */
dx /= 2;
dy /= 2;
ux1 = ux0 + dx;
uy1 = uy0 + dy;
ux0 -= dx;
uy0 -= dy;
layerMask = GetLayerMask( PtText->GetLayer() );
TraceFilledRectangle( ux0 - marge, uy0 - marge, ux1 + marge,
uy1 + marge, PtText->GetOrientation(),
layerMask, HOLE, WRITE_CELL );
TraceFilledRectangle( ux0 - via_marge, uy0 - via_marge,
ux1 + via_marge, uy1 + via_marge,
PtText->GetOrientation(),
layerMask, VIA_IMPOSSIBLE, WRITE_OR_CELL );
}
break;
default:
break;
}
}
/* Put tracks and vias on matrix */
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( net_code == track->GetNet() )
continue;
TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
}
const EDA_RECT DRAWSEGMENT::GetBoundingBox() const
{
EDA_RECT bbox;
bbox.SetOrigin( m_Start );
switch( m_Shape )
{
case S_SEGMENT:
bbox.SetEnd( m_End );
break;
case S_CIRCLE:
bbox.Inflate( GetRadius() );
break;
case S_ARC:
{
bbox.Merge( m_End );
wxPoint end = m_End;
RotatePoint( &end, m_Start, -m_Angle );
bbox.Merge( end );
}
break;
case S_POLYGON:
{
wxPoint p_end;
MODULE* module = GetParentModule();
for( unsigned ii = 0; ii < m_PolyPoints.size(); ii++ )
{
wxPoint pt = m_PolyPoints[ii];
if( module ) // Transform, if we belong to a module
{
RotatePoint( &pt, module->GetOrientation() );
pt += module->GetPosition();
}
if( ii == 0 )
p_end = pt;
bbox.SetX( std::min( bbox.GetX(), pt.x ) );
bbox.SetY( std::min( bbox.GetY(), pt.y ) );
p_end.x = std::max( p_end.x, pt.x );
p_end.y = std::max( p_end.y, pt.y );
}
bbox.SetEnd( p_end );
}
break;
default:
;
}
bbox.Inflate( ((m_Width+1) / 2) + 1 );
bbox.Normalize();
return bbox;
}
bool GENDRILL_WRITER_BASE::genDrillMapFile( const wxString& aFullFileName,
PlotFormat aFormat )
{
// Remark:
// Hole list must be created before calling this function, by buildHolesList(),
// for the right holes set (PTH, NPTH, buried/blind vias ...)
double scale = 1.0;
wxPoint offset;
PLOTTER* plotter = NULL;
PAGE_INFO dummy( PAGE_INFO::A4, false );
PCB_PLOT_PARAMS plot_opts; // starts plotting with default options
LOCALE_IO toggle; // use standard C notation for float numbers
const PAGE_INFO& page_info = m_pageInfo ? *m_pageInfo : dummy;
// Calculate dimensions and center of PCB
EDA_RECT bbbox = m_pcb->GetBoardEdgesBoundingBox();
// Calculate the scale for the format type, scale 1 in HPGL, drawing on
// an A4 sheet in PS, + text description of symbols
switch( aFormat )
{
case PLOT_FORMAT_GERBER:
offset = GetOffset();
plotter = new GERBER_PLOTTER();
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
plotter->SetGerberCoordinatesFormat( 5 ); // format x.5 unit = mm
break;
case PLOT_FORMAT_HPGL: // Scale for HPGL format.
{
HPGL_PLOTTER* hpgl_plotter = new HPGL_PLOTTER;
plotter = hpgl_plotter;
hpgl_plotter->SetPenNumber( plot_opts.GetHPGLPenNum() );
hpgl_plotter->SetPenSpeed( plot_opts.GetHPGLPenSpeed() );
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
default:
wxASSERT( false );
// fall through
case PLOT_FORMAT_PDF:
case PLOT_FORMAT_POST:
{
PAGE_INFO pageA4( wxT( "A4" ) );
wxSize pageSizeIU = pageA4.GetSizeIU();
// Reserve a margin around the page.
int margin = KiROUND( 20 * IU_PER_MM );
// Calculate a scaling factor to print the board on the sheet
double Xscale = double( pageSizeIU.x - ( 2 * margin ) ) / bbbox.GetWidth();
// We should print the list of drill sizes, so reserve room for it
// 60% height for board 40% height for list
int ypagesize_for_board = KiROUND( pageSizeIU.y * 0.6 );
double Yscale = double( ypagesize_for_board - margin ) / bbbox.GetHeight();
scale = std::min( Xscale, Yscale );
// Experience shows the scale should not to large, because texts
// create problem (can be to big or too small).
// So the scale is clipped at 3.0;
scale = std::min( scale, 3.0 );
offset.x = KiROUND( double( bbbox.Centre().x ) -
( pageSizeIU.x / 2.0 ) / scale );
offset.y = KiROUND( double( bbbox.Centre().y ) -
( ypagesize_for_board / 2.0 ) / scale );
if( aFormat == PLOT_FORMAT_PDF )
plotter = new PDF_PLOTTER;
else
plotter = new PS_PLOTTER;
plotter->SetPageSettings( pageA4 );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_DXF:
{
DXF_PLOTTER* dxf_plotter = new DXF_PLOTTER;
plotter = dxf_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_SVG:
{
SVG_PLOTTER* svg_plotter = new SVG_PLOTTER;
plotter = svg_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
}
plotter->SetCreator( wxT( "PCBNEW" ) );
plotter->SetDefaultLineWidth( 5 * IU_PER_MILS );
plotter->SetColorMode( false );
if( ! plotter->OpenFile( aFullFileName ) )
{
delete plotter;
return false;
}
plotter->StartPlot();
// Draw items on edge layer (not all, only items useful for drill map
BRDITEMS_PLOTTER itemplotter( plotter, m_pcb, plot_opts );
itemplotter.SetLayerSet( Edge_Cuts );
for( auto PtStruct : m_pcb->Drawings() )
{
switch( PtStruct->Type() )
{
case PCB_LINE_T:
itemplotter.PlotDrawSegment( (DRAWSEGMENT*) PtStruct );
break;
case PCB_TEXT_T:
itemplotter.PlotTextePcb( (TEXTE_PCB*) PtStruct );
break;
case PCB_DIMENSION_T:
case PCB_TARGET_T:
case PCB_MARKER_T: // do not draw
default:
break;
}
}
int x, y;
int plotX, plotY, TextWidth;
int intervalle = 0;
char line[1024];
wxString msg;
int textmarginaftersymbol = KiROUND( 2 * IU_PER_MM );
// Set Drill Symbols width
plotter->SetDefaultLineWidth( 0.2 * IU_PER_MM / scale );
plotter->SetCurrentLineWidth( -1 );
// Plot board outlines and drill map
plotDrillMarks( plotter );
// Print a list of symbols used.
int charSize = 3 * IU_PER_MM; // text size in IUs
double charScale = 1.0 / scale; // real scale will be 1/scale,
// because the global plot scale is scale
TextWidth = KiROUND( (charSize * charScale) / 10.0 ); // Set text width (thickness)
intervalle = KiROUND( charSize * charScale ) + TextWidth;
// Trace information.
plotX = KiROUND( bbbox.GetX() + textmarginaftersymbol * charScale );
plotY = bbbox.GetBottom() + intervalle;
// Plot title "Info"
wxString Text = wxT( "Drill Map:" );
plotter->Text( wxPoint( plotX, plotY ), COLOR4D::UNSPECIFIED, Text, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
for( unsigned ii = 0; ii < m_toolListBuffer.size(); ii++ )
{
DRILL_TOOL& tool = m_toolListBuffer[ii];
if( tool.m_TotalCount == 0 )
continue;
plotY += intervalle;
int plot_diam = KiROUND( tool.m_Diameter );
x = KiROUND( plotX - textmarginaftersymbol * charScale - plot_diam / 2.0 );
y = KiROUND( plotY + charSize * charScale );
plotter->Marker( wxPoint( x, y ), plot_diam, ii );
// List the diameter of each drill in mm and inches.
sprintf( line, "%2.2fmm / %2.3f\" ",
diameter_in_mm( tool.m_Diameter ),
diameter_in_inches( tool.m_Diameter ) );
msg = FROM_UTF8( line );
// Now list how many holes and ovals are associated with each drill.
if( ( tool.m_TotalCount == 1 )
&& ( tool.m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if( tool.m_TotalCount == 1 ) // && ( toolm_OvalCount == 1 )
sprintf( line, "(1 slot)" );
else if( tool.m_OvalCount == 0 )
sprintf( line, "(%d holes)", tool.m_TotalCount );
else if( tool.m_OvalCount == 1 )
sprintf( line, "(%d holes + 1 slot)", tool.m_TotalCount - 1 );
else // if ( toolm_OvalCount > 1 )
sprintf( line, "(%d holes + %d slots)",
tool.m_TotalCount - tool.m_OvalCount,
tool.m_OvalCount );
msg += FROM_UTF8( line );
if( tool.m_Hole_NotPlated )
msg += wxT( " (not plated)" );
plotter->Text( wxPoint( plotX, y ), COLOR4D::UNSPECIFIED, msg, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
intervalle = KiROUND( ( ( charSize * charScale ) + TextWidth ) * 1.2 );
if( intervalle < ( plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth ) )
intervalle = plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth;
}
plotter->EndPlot();
delete plotter;
return true;
}
const EDA_RECT DRAWSEGMENT::GetBoundingBox() const
{
EDA_RECT bbox;
bbox.SetOrigin( m_Start );
switch( m_Shape )
{
case S_SEGMENT:
bbox.SetEnd( m_End );
break;
case S_CIRCLE:
bbox.Inflate( GetRadius() );
break;
case S_ARC:
{
bbox.Merge( m_End );
wxPoint end = m_End;
RotatePoint( &end, m_Start, -m_Angle );
bbox.Merge( end );
// Determine the starting quarter
// 0 right-bottom
// 1 left-bottom
// 2 left-top
// 3 right-top
unsigned int quarter = 0; // assume right-bottom
if( m_End.y < m_Start.y ) // change to left-top
quarter |= 3;
if( m_End.x < m_Start.x ) // for left side, the LSB is 2nd bit negated
quarter ^= 1;
int radius = GetRadius();
int angle = (int) GetArcAngleStart() % 900 + m_Angle;
bool directionCW = ( m_Angle > 0 ); // Is the direction of arc clockwise?
if( !directionCW )
{
angle = 900 - angle;
quarter = ( quarter + 3 ) % 4; // -1 modulo arithmetic
}
while( angle > 900 )
{
switch( quarter )
{
case 0:
bbox.Merge( wxPoint( m_Start.x, m_Start.y + radius ) ); // down
break;
case 1:
bbox.Merge( wxPoint( m_Start.x - radius, m_Start.y ) ); // left
break;
case 2:
bbox.Merge( wxPoint( m_Start.x, m_Start.y - radius ) ); // up
break;
case 3:
bbox.Merge( wxPoint( m_Start.x + radius, m_Start.y ) ); // right
break;
}
if( directionCW )
++quarter;
else
quarter += 3; // -1 modulo arithmetic
quarter %= 4;
angle -= 900;
}
}
break;
case S_POLYGON:
{
wxPoint p_end;
MODULE* module = GetParentModule();
for( unsigned ii = 0; ii < m_PolyPoints.size(); ii++ )
{
wxPoint pt = m_PolyPoints[ii];
if( module ) // Transform, if we belong to a module
{
RotatePoint( &pt, module->GetOrientation() );
pt += module->GetPosition();
}
if( ii == 0 )
p_end = pt;
bbox.SetX( std::min( bbox.GetX(), pt.x ) );
bbox.SetY( std::min( bbox.GetY(), pt.y ) );
p_end.x = std::max( p_end.x, pt.x );
p_end.y = std::max( p_end.y, pt.y );
}
bbox.SetEnd( p_end );
}
break;
default:
;
}
bbox.Inflate( ((m_Width+1) / 2) + 1 );
bbox.Normalize();
return bbox;
}
