예제 #1
0
bool MeshRefinement::limit_overrefined_boundary(const unsigned int max_mismatch)
{
  // This function must be run on all processors at once
  parallel_object_only();

  bool flags_changed = false;

  // Loop over all the active elements & look for mismatches to fix.
  {
    MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
    const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

    for (; elem_it != elem_end; ++elem_it)
      {
        Elem* elem = *elem_it;

        // If we don't have an interior_parent then there's nothing to
        // be mismatched with.
        if ((elem->dim() >= LIBMESH_DIM) ||
            !elem->interior_parent())
          continue;

        const unsigned char elem_level =
          cast_int<unsigned char>(elem->level() +
                                  ((elem->refinement_flag() == Elem::REFINE) ? 1 : 0));
        const unsigned char elem_p_level =
          cast_int<unsigned char>(elem->p_level() +
                                  ((elem->p_refinement_flag() == Elem::REFINE) ? 1 : 0));

        // get all relevant interior elements
        std::set<const Elem*> neighbor_set;
        elem->find_interior_neighbors(neighbor_set);

        std::set<const Elem*>::iterator n_it = neighbor_set.begin();
        for (; n_it != neighbor_set.end(); ++n_it)
          {
            // FIXME - non-const versions of the Elem set methods
            // would be nice
            Elem* neighbor = const_cast<Elem*>(*n_it);

            if (((elem_level - max_mismatch) >
                 neighbor->level()) &&
                (neighbor->refinement_flag() != Elem::REFINE))
              {
                neighbor->set_refinement_flag(Elem::REFINE);
                flags_changed = true;
              }
            if (((elem_p_level + 1 - max_mismatch) >
                 neighbor->p_level()) &&
                (neighbor->p_refinement_flag() != Elem::REFINE))
              {
                neighbor->set_p_refinement_flag(Elem::REFINE);
                flags_changed = true;
              }
          } // loop over interior neighbors
      }
  }

  return flags_changed;
}
예제 #2
0
void HPSingularity::select_refinement (System &system)
{
  START_LOG("select_refinement()", "HPSingularity");

  // The current mesh
  MeshBase& mesh = system.get_mesh();

  MeshBase::element_iterator       elem_it  =
    mesh.active_local_elements_begin();
  const MeshBase::element_iterator elem_end =
    mesh.active_local_elements_end();

  for (; elem_it != elem_end; ++elem_it)
    {
      Elem* elem = *elem_it;

      // We're only checking elements that are already flagged for h
      // refinement
      if (elem->refinement_flag() != Elem::REFINE)
        continue;

      elem->set_p_refinement_flag(Elem::REFINE);
      elem->set_refinement_flag(Elem::DO_NOTHING);

      for (std::list<Point>::iterator ppoint =
             singular_points.begin();
           ppoint != singular_points.end(); ++ppoint)
        {
          if (elem->contains_point(*ppoint))
            {
              elem->set_p_refinement_flag(Elem::DO_NOTHING);
              elem->set_refinement_flag(Elem::REFINE);
              break;
            }
        }
    }

  STOP_LOG("select_refinement()", "HPSingularity");
}
예제 #3
0
void Elem::refine (MeshRefinement& mesh_refinement)
{
  libmesh_assert (this->refinement_flag() == Elem::REFINE);
  libmesh_assert (this->active());

  // Create my children if necessary
  if (!_children)
    {
      _children = new Elem*[this->n_children()];

      unsigned int parent_p_level = this->p_level();
      for (unsigned int c=0; c<this->n_children(); c++)
        {
	  _children[c] = Elem::build(this->type(), this).release();
	  _children[c]->set_refinement_flag(Elem::JUST_REFINED);
	  _children[c]->set_p_level(parent_p_level);
	  _children[c]->set_p_refinement_flag(this->p_refinement_flag());
        }

      // Compute new nodal locations
      // and asssign nodes to children
      // Make these static.  It is unlikely the
      // sizes will change from call to call, so having these
      // static should save on reallocations
      std::vector<std::vector<Point> >        p    (this->n_children());
      std::vector<std::vector<Node*> >        nodes(this->n_children());


      // compute new nodal locations
      for (unsigned int c=0; c<this->n_children(); c++)
        {
          Elem *child = this->child(c);
	  p[c].resize    (child->n_nodes());
	  nodes[c].resize(child->n_nodes());

	  for (unsigned int nc=0; nc<child->n_nodes(); nc++)
	    {
	      // zero entries
	      p[c][nc].zero();
	      nodes[c][nc] = NULL;

	      for (unsigned int n=0; n<this->n_nodes(); n++)
	        {
		  // The value from the embedding matrix
		  const float em_val = this->embedding_matrix(c,nc,n);

		  if (em_val != 0.)
		    {
		      p[c][nc].add_scaled (this->point(n), em_val);

		      // We may have found the node, in which case we
		      // won't need to look it up later.
		      if (em_val == 1.)
		        nodes[c][nc] = this->get_node(n);
		    }
	        }
	    }

	// assign nodes to children & add them to the mesh
          const Real pointtol = this->hmin() * TOLERANCE;
	  for (unsigned int nc=0; nc<child->n_nodes(); nc++)
	    {
	      if (nodes[c][nc] != NULL)
	        {
		  child->set_node(nc) = nodes[c][nc];
	        }
	      else
	        {
		  child->set_node(nc) =
		    mesh_refinement.add_point(p[c][nc],
					      child->processor_id(),
                                              pointtol);
		  child->get_node(nc)->set_n_systems
                    (this->n_systems());
	        }
	    }

	  mesh_refinement.add_elem (child);
          child->set_n_systems(this->n_systems());
        }
    }
  else
    {
      unsigned int parent_p_level = this->p_level();
      for (unsigned int c=0; c<this->n_children(); c++)
        {
          Elem *child = this->child(c);
          libmesh_assert(child->subactive());
          child->set_refinement_flag(Elem::JUST_REFINED);
          child->set_p_level(parent_p_level);
          child->set_p_refinement_flag(this->p_refinement_flag());
        }
    }

  // Un-set my refinement flag now
  this->set_refinement_flag(Elem::INACTIVE);
  this->set_p_refinement_flag(Elem::INACTIVE);

  for (unsigned int c=0; c<this->n_children(); c++)
    {
      libmesh_assert(this->child(c)->parent() == this);
      libmesh_assert(this->child(c)->active());
    }
  libmesh_assert (this->ancestor());
}
예제 #4
0
void UnstructuredMesh::copy_nodes_and_elements(const UnstructuredMesh & other_mesh,
                                               const bool skip_find_neighbors)
{
  // We're assuming our subclass data needs no copy
  libmesh_assert_equal_to (_n_parts, other_mesh._n_parts);
  libmesh_assert (std::equal(_elem_dims.begin(), _elem_dims.end(), other_mesh._elem_dims.begin()));
  libmesh_assert_equal_to (_is_prepared, other_mesh._is_prepared);

  // We're assuming the other mesh has proper element number ordering,
  // so that we add parents before their children.
#ifdef DEBUG
  MeshTools::libmesh_assert_valid_amr_elem_ids(other_mesh);
#endif

  //Copy in Nodes
  {
    //Preallocate Memory if necessary
    this->reserve_nodes(other_mesh.n_nodes());

    const_node_iterator it = other_mesh.nodes_begin();
    const_node_iterator end = other_mesh.nodes_end();

    for (; it != end; ++it)
      {
        const Node * oldn = *it;

        // Add new nodes in old node Point locations
#ifdef LIBMESH_ENABLE_UNIQUE_ID
        Node *newn =
#endif
          this->add_point(*oldn, oldn->id(), oldn->processor_id());

#ifdef LIBMESH_ENABLE_UNIQUE_ID
        newn->set_unique_id() = oldn->unique_id();
#endif
      }
  }

  //Copy in Elements
  {
    //Preallocate Memory if necessary
    this->reserve_elem(other_mesh.n_elem());

    // Declare a map linking old and new elements, needed to copy the neighbor lists
    std::map<const Elem *, Elem *> old_elems_to_new_elems;

    // Loop over the elements
    MeshBase::const_element_iterator it = other_mesh.elements_begin();
    const MeshBase::const_element_iterator end = other_mesh.elements_end();

    // FIXME: Where do we set element IDs??
    for (; it != end; ++it)
      {
        //Look at the old element
        const Elem * old = *it;
        //Build a new element
        Elem * newparent = old->parent() ?
          this->elem_ptr(old->parent()->id()) : libmesh_nullptr;
        UniquePtr<Elem> ap = Elem::build(old->type(), newparent);
        Elem * el = ap.release();

        el->subdomain_id() = old->subdomain_id();

        for (unsigned int s=0; s != old->n_sides(); ++s)
          if (old->neighbor_ptr(s) == remote_elem)
            el->set_neighbor(s, const_cast<RemoteElem *>(remote_elem));

#ifdef LIBMESH_ENABLE_AMR
        if (old->has_children())
          for (unsigned int c=0; c != old->n_children(); ++c)
            if (old->child_ptr(c) == remote_elem)
              el->add_child(const_cast<RemoteElem *>(remote_elem), c);

        //Create the parent's child pointers if necessary
        if (newparent)
          {
            unsigned int oldc = old->parent()->which_child_am_i(old);
            newparent->add_child(el, oldc);
          }

        // Copy the refinement flags
        el->set_refinement_flag(old->refinement_flag());

        // Use hack_p_level since we may not have sibling elements
        // added yet
        el->hack_p_level(old->p_level());

        el->set_p_refinement_flag(old->p_refinement_flag());
#endif // #ifdef LIBMESH_ENABLE_AMR

        //Assign all the nodes
        for(unsigned int i=0;i<el->n_nodes();i++)
          el->set_node(i) = this->node_ptr(old->node_id(i));

        // And start it off in the same subdomain
        el->processor_id() = old->processor_id();

        // Give it the same ids
        el->set_id(old->id());

#ifdef LIBMESH_ENABLE_UNIQUE_ID
        el->set_unique_id() = old->unique_id();
#endif

        //Hold onto it
        if(!skip_find_neighbors)
          {
            this->add_elem(el);
          }
        else
          {
            Elem * new_el = this->add_elem(el);
            old_elems_to_new_elems[old] = new_el;
          }

        // Add the link between the original element and this copy to the map
        if(skip_find_neighbors)
          old_elems_to_new_elems[old] = el;
      }

    // Loop (again) over the elements to fill in the neighbors
    if(skip_find_neighbors)
      {
        it = other_mesh.elements_begin();
        for (; it != end; ++it)
          {
            Elem * old_elem = *it;
            Elem * new_elem = old_elems_to_new_elems[old_elem];
            for (unsigned int s=0; s != old_elem->n_neighbors(); ++s)
              {
                const Elem * old_neighbor = old_elem->neighbor_ptr(s);
                Elem * new_neighbor = old_elems_to_new_elems[old_neighbor];
                new_elem->set_neighbor(s, new_neighbor);
              }
          }
      }
  }

  //Finally prepare the new Mesh for use.  Keep the same numbering and
  //partitioning but also the same renumbering and partitioning
  //policies as our source mesh.
  this->allow_renumbering(false);
  this->skip_partitioning(true);
  this->prepare_for_use(false, skip_find_neighbors);
  this->allow_renumbering(other_mesh.allow_renumbering());
  this->skip_partitioning(other_mesh.skip_partitioning());
}
예제 #5
0
void unpack(std::vector<largest_id_type>::const_iterator in,
            Elem** out,
            MeshBase* mesh)
{
#ifndef NDEBUG
  const std::vector<largest_id_type>::const_iterator original_in = in;

  const largest_id_type incoming_header = *in++;
  libmesh_assert_equal_to (incoming_header, elem_magic_header);
#endif

  // int 0: level
  const unsigned int level =
    static_cast<unsigned int>(*in++);

#ifdef LIBMESH_ENABLE_AMR
  // int 1: p level
  const unsigned int p_level =
    static_cast<unsigned int>(*in++);

  // int 2: refinement flag
  const int rflag = *in++;
  libmesh_assert_greater_equal (rflag, 0);
  libmesh_assert_less (rflag, Elem::INVALID_REFINEMENTSTATE);
  const Elem::RefinementState refinement_flag =
    static_cast<Elem::RefinementState>(rflag);

  // int 3: p refinement flag
  const int pflag = *in++;
  libmesh_assert_greater_equal (pflag, 0);
  libmesh_assert_less (pflag, Elem::INVALID_REFINEMENTSTATE);
  const Elem::RefinementState p_refinement_flag =
    static_cast<Elem::RefinementState>(pflag);
#else
  in += 3;
#endif // LIBMESH_ENABLE_AMR

  // int 4: element type
  const int typeint = *in++;
  libmesh_assert_greater_equal (typeint, 0);
  libmesh_assert_less (typeint, INVALID_ELEM);
  const ElemType type =
    static_cast<ElemType>(typeint);

  const unsigned int n_nodes =
    Elem::type_to_n_nodes_map[type];

  // int 5: processor id
  const processor_id_type processor_id =
    static_cast<processor_id_type>(*in++);
  libmesh_assert (processor_id < mesh->n_processors() ||
                  processor_id == DofObject::invalid_processor_id);

  // int 6: subdomain id
  const subdomain_id_type subdomain_id =
    static_cast<subdomain_id_type>(*in++);

  // int 7: dof object id
  const dof_id_type id =
    static_cast<dof_id_type>(*in++);
  libmesh_assert_not_equal_to (id, DofObject::invalid_id);

#ifdef LIBMESH_ENABLE_UNIQUE_ID
  // int 8: dof object unique id
  const unique_id_type unique_id =
    static_cast<unique_id_type>(*in++);
#endif

#ifdef LIBMESH_ENABLE_AMR
  // int 9: parent dof object id
  const dof_id_type parent_id =
    static_cast<dof_id_type>(*in++);
  libmesh_assert (level == 0 || parent_id != DofObject::invalid_id);
  libmesh_assert (level != 0 || parent_id == DofObject::invalid_id);

  // int 10: local child id
  const unsigned int which_child_am_i =
    static_cast<unsigned int>(*in++);
#else
  in += 2;
#endif // LIBMESH_ENABLE_AMR

  // Make sure we don't miscount above when adding the "magic" header
  // plus the real data header
  libmesh_assert_equal_to (in - original_in, header_size + 1);

  Elem *elem = mesh->query_elem(id);

  // if we already have this element, make sure its
  // properties match, and update any missing neighbor
  // links, but then go on
  if (elem)
    {
      libmesh_assert_equal_to (elem->level(), level);
      libmesh_assert_equal_to (elem->id(), id);
//#ifdef LIBMESH_ENABLE_UNIQUE_ID
      // No check for unqiue id sanity
//#endif
      libmesh_assert_equal_to (elem->processor_id(), processor_id);
      libmesh_assert_equal_to (elem->subdomain_id(), subdomain_id);
      libmesh_assert_equal_to (elem->type(), type);
      libmesh_assert_equal_to (elem->n_nodes(), n_nodes);

#ifndef NDEBUG
      // All our nodes should be correct
      for (unsigned int i=0; i != n_nodes; ++i)
        libmesh_assert(elem->node(i) ==
                       static_cast<dof_id_type>(*in++));
#else
      in += n_nodes;
#endif

#ifdef LIBMESH_ENABLE_AMR
      libmesh_assert_equal_to (elem->p_level(), p_level);
      libmesh_assert_equal_to (elem->refinement_flag(), refinement_flag);
      libmesh_assert_equal_to (elem->p_refinement_flag(), p_refinement_flag);

      libmesh_assert (!level || elem->parent() != NULL);
      libmesh_assert (!level || elem->parent()->id() == parent_id);
      libmesh_assert (!level || elem->parent()->child(which_child_am_i) == elem);
#endif

      // Our neighbor links should be "close to" correct - we may have
      // to update them, but we can check for some inconsistencies.
      for (unsigned int n=0; n != elem->n_neighbors(); ++n)
        {
          const dof_id_type neighbor_id =
            static_cast<dof_id_type>(*in++);

	  // If the sending processor sees a domain boundary here,
	  // we'd better agree.
          if (neighbor_id == DofObject::invalid_id)
            {
              libmesh_assert (!(elem->neighbor(n)));
              continue;
            }

	  // If the sending processor has a remote_elem neighbor here,
	  // then all we know is that we'd better *not* have a domain
	  // boundary.
          if (neighbor_id == remote_elem->id())
            {
              libmesh_assert(elem->neighbor(n));
              continue;
            }

          Elem *neigh = mesh->query_elem(neighbor_id);

          // The sending processor sees a neighbor here, so if we
          // don't have that neighboring element, then we'd better
          // have a remote_elem signifying that fact.
          if (!neigh)
            {
              libmesh_assert_equal_to (elem->neighbor(n), remote_elem);
              continue;
            }

          // The sending processor has a neighbor here, and we have
          // that element, but that does *NOT* mean we're already
	  // linking to it.  Perhaps we initially received both elem
	  // and neigh from processors on which their mutual link was
	  // remote?
          libmesh_assert(elem->neighbor(n) == neigh ||
			 elem->neighbor(n) == remote_elem);

	  // If the link was originally remote, we should update it,
	  // and make sure the appropriate parts of its family link
	  // back to us.
	  if (elem->neighbor(n) == remote_elem)
            {
              elem->set_neighbor(n, neigh);

              elem->make_links_to_me_local(n);
	    }
	}

      // FIXME: We should add some debug mode tests to ensure that the
      // encoded indexing and boundary conditions are consistent.
    }
  else
    {
      // We don't already have the element, so we need to create it.

      // Find the parent if necessary
      Elem *parent = NULL;
#ifdef LIBMESH_ENABLE_AMR
      // Find a child element's parent
      if (level > 0)
        {
	  // Note that we must be very careful to construct the send
	  // connectivity so that parents are encountered before
	  // children.  If we get here and can't find the parent that
	  // is a fatal error.
          parent = mesh->elem(parent_id);
        }
      // Or assert that the sending processor sees no parent
      else
        libmesh_assert_equal_to (parent_id, static_cast<dof_id_type>(-1));
#else
      // No non-level-0 elements without AMR
      libmesh_assert_equal_to (level, 0);
#endif

      elem = Elem::build(type,parent).release();
      libmesh_assert (elem);

#ifdef LIBMESH_ENABLE_AMR
      if (level != 0)
        {
          // Since this is a newly created element, the parent must
          // have previously thought of this child as a remote element.
          libmesh_assert_equal_to (parent->child(which_child_am_i), remote_elem);

          parent->add_child(elem, which_child_am_i);
        }

      // Assign the refinement flags and levels
      elem->set_p_level(p_level);
      elem->set_refinement_flag(refinement_flag);
      elem->set_p_refinement_flag(p_refinement_flag);
      libmesh_assert_equal_to (elem->level(), level);

      // If this element definitely should have children, assign
      // remote_elem to all of them for now, for consistency.  Later
      // unpacked elements may overwrite that.
      if (!elem->active())
        for (unsigned int c=0; c != elem->n_children(); ++c)
          elem->add_child(const_cast<RemoteElem*>(remote_elem), c);

#endif // LIBMESH_ENABLE_AMR

      // Assign the IDs
      elem->subdomain_id()  = subdomain_id;
      elem->processor_id()  = processor_id;
      elem->set_id()        = id;
#ifdef LIBMESH_ENABLE_UNIQUE_ID
      elem->set_unique_id() = unique_id;
#endif

      // Assign the connectivity
      libmesh_assert_equal_to (elem->n_nodes(), n_nodes);

      for (unsigned int n=0; n != n_nodes; n++)
        elem->set_node(n) =
          mesh->node_ptr
	    (static_cast<dof_id_type>(*in++));

      for (unsigned int n=0; n<elem->n_neighbors(); n++)
        {
          const dof_id_type neighbor_id =
            static_cast<dof_id_type>(*in++);

          if (neighbor_id == DofObject::invalid_id)
	    continue;

          // We may be unpacking an element that was a ghost element on the
          // sender, in which case the element's neighbors may not all be
          // known by the packed element.  We'll have to set such
          // neighbors to remote_elem ourselves and wait for a later
          // packed element to give us better information.
          if (neighbor_id == remote_elem->id())
            {
              elem->set_neighbor(n, const_cast<RemoteElem*>(remote_elem));
	      continue;
	    }

          // If we don't have the neighbor element, then it's a
          // remote_elem until we get it.
          Elem *neigh = mesh->query_elem(neighbor_id);
          if (!neigh)
            {
              elem->set_neighbor(n, const_cast<RemoteElem*>(remote_elem));
	      continue;
	    }

          // If we have the neighbor element, then link to it, and
          // make sure the appropriate parts of its family link back
          // to us.
          elem->set_neighbor(n, neigh);

          elem->make_links_to_me_local(n);
        }

      elem->unpack_indexing(in);
    }

  in += elem->packed_indexing_size();

  // If this is a coarse element,
  // add any element side boundary condition ids
  if (level == 0)
    for (unsigned int s = 0; s != elem->n_sides(); ++s)
      {
        const int num_bcs = *in++;
        libmesh_assert_greater_equal (num_bcs, 0);

        for(int bc_it=0; bc_it < num_bcs; bc_it++)
          mesh->boundary_info->add_side (elem, s, *in++);
      }

  // Return the new element
  *out = elem;
}
//-----------------------------------------------------------------
// Mesh refinement methods
bool MeshRefinement::limit_level_mismatch_at_node (const unsigned int max_mismatch)
{
  // This function must be run on all processors at once
  parallel_only();

  bool flags_changed = false;


  // Vector holding the maximum element level that touches a node.
  std::vector<unsigned char> max_level_at_node (_mesh.n_nodes(), 0);
  std::vector<unsigned char> max_p_level_at_node (_mesh.n_nodes(), 0);


  // Loop over all the active elements & fill the vector
  {
    MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
    const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

    for (; elem_it != elem_end; ++elem_it)
      {
	const Elem* elem = *elem_it;
	const unsigned char elem_level =
	  elem->level() + ((elem->refinement_flag() == Elem::REFINE) ? 1 : 0);
	const unsigned char elem_p_level =
	  elem->p_level() + ((elem->p_refinement_flag() == Elem::REFINE) ? 1 : 0);

	// Set the max_level at each node
	for (unsigned int n=0; n<elem->n_nodes(); n++)
	  {
	    const unsigned int node_number = elem->node(n);

	    libmesh_assert_less (node_number, max_level_at_node.size());

	    max_level_at_node[node_number] =
	      std::max (max_level_at_node[node_number], elem_level);
	    max_p_level_at_node[node_number] =
	      std::max (max_p_level_at_node[node_number], elem_p_level);
	  }
      }
  }


  // Now loop over the active elements and flag the elements
  // who violate the requested level mismatch
  {
    MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
    const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

    for (; elem_it != elem_end; ++elem_it)
      {
	Elem* elem = *elem_it;
	const unsigned int elem_level = elem->level();
	const unsigned int elem_p_level = elem->p_level();

	// Skip the element if it is already fully flagged
	if (elem->refinement_flag() == Elem::REFINE &&
            elem->p_refinement_flag() == Elem::REFINE)
	  continue;

	// Loop over the nodes, check for possible mismatch
	for (unsigned int n=0; n<elem->n_nodes(); n++)
	  {
	    const unsigned int node_number = elem->node(n);

	    // Flag the element for refinement if it violates
	    // the requested level mismatch
	    if ( (elem_level + max_mismatch) < max_level_at_node[node_number]
                 && elem->refinement_flag() != Elem::REFINE)
	      {
		elem->set_refinement_flag (Elem::REFINE);
		flags_changed = true;
	      }
	    if ( (elem_p_level + max_mismatch) < max_p_level_at_node[node_number]
                 && elem->p_refinement_flag() != Elem::REFINE)
	      {
		elem->set_p_refinement_flag (Elem::REFINE);
		flags_changed = true;
	      }
	  }
      }
  }

  // If flags changed on any processor then they changed globally
  CommWorld.max(flags_changed);

  return flags_changed;
}
bool MeshRefinement::eliminate_unrefined_patches ()
{
  // This function must be run on all processors at once
  parallel_only();

  bool flags_changed = false;

  MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
  const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

  for (; elem_it != elem_end; ++elem_it)
    {
      Elem* elem = *elem_it;
      // First assume that we'll have to flag this element for both h
      // and p refinement, then change our minds if we see any
      // neighbors that are as coarse or coarser than us.
      bool h_flag_me = true,
           p_flag_me = true;


      // Skip the element if it is already fully flagged for refinement
      if (elem->p_refinement_flag() == Elem::REFINE)
	p_flag_me = false;
      if (elem->refinement_flag() == Elem::REFINE)
        {
          h_flag_me = false;
          if (!p_flag_me)
            continue;
        }
      // Test the parent if that is already flagged for coarsening
      else if (elem->refinement_flag() == Elem::COARSEN)
        {
          libmesh_assert(elem->parent());
	  elem = elem->parent();
          // FIXME - this doesn't seem right - RHS
          if (elem->refinement_flag() != Elem::COARSEN_INACTIVE)
            continue;
          p_flag_me = false;
        }

      const unsigned int my_level = elem->level();
      int my_p_adjustment = 0;
      if (elem->p_refinement_flag() == Elem::REFINE)
        my_p_adjustment = 1;
      else if (elem->p_refinement_flag() == Elem::COARSEN)
        {
          libmesh_assert_greater (elem->p_level(), 0);
          my_p_adjustment = -1;
        }
      const unsigned int my_new_p_level = elem->p_level() +
                                          my_p_adjustment;

      // Check all the element neighbors
      for (unsigned int n=0; n<elem->n_neighbors(); n++)
        {
          const Elem *neighbor = elem->neighbor(n);
	  // Quit if the element is on a local boundary
	  if (neighbor == NULL || neighbor == remote_elem)
            {
              h_flag_me = false;
              p_flag_me = false;
              break;
            }
          // if the neighbor will be equally or less refined than
	  // we are, then we will not become an unrefined island.
          // So if we are still considering h refinement:
          if (h_flag_me &&
            // If our neighbor is already at a lower level,
            // it can't end up at a higher level even if it
            // is flagged for refinement once
             ((neighbor->level() < my_level) ||
            // If our neighbor is at the same level but isn't
            // flagged for refinement, it won't end up at a
            // higher level
             ((neighbor->active()) &&
              (neighbor->refinement_flag() != Elem::REFINE)) ||
            // If our neighbor is currently more refined but is
            // a parent flagged for coarsening, it will end up
            // at the same level.
             (neighbor->refinement_flag() == Elem::COARSEN_INACTIVE)))
            {
              // We've proven we won't become an unrefined island,
              // so don't h refine to avoid that.
	      h_flag_me = false;

              // If we've also proven we don't need to p refine,
              // we don't need to check more neighbors
              if (!p_flag_me)
                break;
            }
	  if (p_flag_me)
            {
	      // if active neighbors will have a p level
	      // equal to or lower than ours, then we do not need to p
              // refine ourselves.
              if (neighbor->active())
                {
                  int p_adjustment = 0;
                  if (neighbor->p_refinement_flag() == Elem::REFINE)
                    p_adjustment = 1;
                  else if (neighbor->p_refinement_flag() == Elem::COARSEN)
                    {
                      libmesh_assert_greater (neighbor->p_level(), 0);
                      p_adjustment = -1;
                    }
                  if (my_new_p_level >= neighbor->p_level() + p_adjustment)
                    {
                      p_flag_me = false;
                      if (!h_flag_me)
                        break;
                    }
                }
              // If we have inactive neighbors, we need to
              // test all their active descendants which neighbor us
              else if (neighbor->ancestor())
                {
                  if (neighbor->min_new_p_level_by_neighbor(elem,
                      my_new_p_level + 2) <= my_new_p_level)
                    {
                      p_flag_me = false;
                      if (!h_flag_me)
                        break;
                    }
                }
            }
        }

      if (h_flag_me)
	{
	  // Parents that would create islands should no longer
          // coarsen
          if (elem->refinement_flag() == Elem::COARSEN_INACTIVE)
            {
              for (unsigned int c=0; c<elem->n_children(); c++)
                {
                  libmesh_assert_equal_to (elem->child(c)->refinement_flag(),
                                          Elem::COARSEN);
                  elem->child(c)->set_refinement_flag(Elem::DO_NOTHING);
                }
              elem->set_refinement_flag(Elem::INACTIVE);
            }
          else
	    elem->set_refinement_flag(Elem::REFINE);
	  flags_changed = true;
	}
      if (p_flag_me)
	{
          if (elem->p_refinement_flag() == Elem::COARSEN)
	    elem->set_p_refinement_flag(Elem::DO_NOTHING);
          else
	    elem->set_p_refinement_flag(Elem::REFINE);
	  flags_changed = true;
	}
    }

  // If flags changed on any processor then they changed globally
  CommWorld.max(flags_changed);

  return flags_changed;
}
//-----------------------------------------------------------------
// Mesh refinement methods
bool MeshRefinement::limit_level_mismatch_at_edge (const unsigned int max_mismatch)
{
  // This function must be run on all processors at once
  parallel_only();

  bool flags_changed = false;


  // Maps holding the maximum element level that touches an edge
  std::map<std::pair<unsigned int, unsigned int>, unsigned char>
    max_level_at_edge;
  std::map<std::pair<unsigned int, unsigned int>, unsigned char>
    max_p_level_at_edge;

  // Loop over all the active elements & fill the maps
  {
    MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
    const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

    for (; elem_it != elem_end; ++elem_it)
      {
	const Elem* elem = *elem_it;
	const unsigned char elem_level =
	  elem->level() + ((elem->refinement_flag() == Elem::REFINE) ? 1 : 0);
	const unsigned char elem_p_level =
	  elem->p_level() + ((elem->p_refinement_flag() == Elem::REFINE) ? 1 : 0);

	// Set the max_level at each edge
	for (unsigned int n=0; n<elem->n_edges(); n++)
	  {
            AutoPtr<Elem> edge = elem->build_edge(n);
            unsigned int childnode0 = edge->node(0);
            unsigned int childnode1 = edge->node(1);
            if (childnode1 < childnode0)
              std::swap(childnode0, childnode1);

	    for (const Elem *p = elem; p != NULL; p = p->parent())
	      {
                AutoPtr<Elem> pedge = p->build_edge(n);
		unsigned int node0 = pedge->node(0);
		unsigned int node1 = pedge->node(1);

                if (node1 < node0)
                  std::swap(node0, node1);

		// If elem does not share this edge with its ancestor
		// p, refinement levels of elements sharing p's edge
		// are not restricted by refinement levels of elem.
		// Furthermore, elem will not share this edge with any
		// of p's ancestors, so we can safely break out of the
		// for loop early.
		if (node0 != childnode0 && node1 != childnode1)
		  break;

                childnode0 = node0;
                childnode1 = node1;

                std::pair<unsigned int, unsigned int> edge_key =
                  std::make_pair(node0, node1);

                if (max_level_at_edge.find(edge_key) ==
                    max_level_at_edge.end())
                  {
                    max_level_at_edge[edge_key] = elem_level;
	            max_p_level_at_edge[edge_key] = elem_p_level;
                  }
                else
                  {
	            max_level_at_edge[edge_key] =
	              std::max (max_level_at_edge[edge_key], elem_level);
	            max_p_level_at_edge[edge_key] =
	              std::max (max_p_level_at_edge[edge_key], elem_p_level);
                  }
              }
	  }
      }
  }


  // Now loop over the active elements and flag the elements
  // who violate the requested level mismatch
  {
    MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
    const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

    for (; elem_it != elem_end; ++elem_it)
      {
	Elem* elem = *elem_it;
	const unsigned int elem_level = elem->level();
	const unsigned int elem_p_level = elem->p_level();

	// Skip the element if it is already fully flagged
	if (elem->refinement_flag() == Elem::REFINE &&
            elem->p_refinement_flag() == Elem::REFINE)
	  continue;

	// Loop over the nodes, check for possible mismatch
	for (unsigned int n=0; n<elem->n_edges(); n++)
	  {
            AutoPtr<Elem> edge = elem->build_edge(n);
            unsigned int node0 = edge->node(0);
            unsigned int node1 = edge->node(1);
            if (node1 < node0)
              std::swap(node0, node1);

            std::pair<unsigned int, unsigned int> edge_key =
              std::make_pair(node0, node1);

	    // Flag the element for refinement if it violates
	    // the requested level mismatch
	    if ( (elem_level + max_mismatch) < max_level_at_edge[edge_key]
                 && elem->refinement_flag() != Elem::REFINE)
	      {
		elem->set_refinement_flag (Elem::REFINE);
		flags_changed = true;
	      }
	    if ( (elem_p_level + max_mismatch) < max_p_level_at_edge[edge_key]
                 && elem->p_refinement_flag() != Elem::REFINE)
	      {
		elem->set_p_refinement_flag (Elem::REFINE);
		flags_changed = true;
	      }
	  }
      }
  }

  // If flags changed on any processor then they changed globally
  CommWorld.max(flags_changed);

  return flags_changed;
}
예제 #9
0
Elem *
Packing<Elem *>::unpack (std::vector<largest_id_type>::const_iterator in,
                         MeshBase * mesh)
{
#ifndef NDEBUG
  const std::vector<largest_id_type>::const_iterator original_in = in;

  const largest_id_type incoming_header = *in++;
  libmesh_assert_equal_to (incoming_header, elem_magic_header);
#endif

  // int 0: level
  const unsigned int level =
    cast_int<unsigned int>(*in++);

#ifdef LIBMESH_ENABLE_AMR
  // int 1: p level
  const unsigned int p_level =
    cast_int<unsigned int>(*in++);

  // int 2: refinement flag and encoded has_children
  const int rflag = cast_int<int>(*in++);
  const int invalid_rflag =
    cast_int<int>(Elem::INVALID_REFINEMENTSTATE);
  libmesh_assert_greater_equal (rflag, 0);

  libmesh_assert_less (rflag, invalid_rflag*2+1);

  const bool has_children = (rflag > invalid_rflag);

  const Elem::RefinementState refinement_flag = has_children ?
    cast_int<Elem::RefinementState>(rflag - invalid_rflag - 1) :
    cast_int<Elem::RefinementState>(rflag);

  // int 3: p refinement flag
  const int pflag = cast_int<int>(*in++);
  libmesh_assert_greater_equal (pflag, 0);
  libmesh_assert_less (pflag, Elem::INVALID_REFINEMENTSTATE);
  const Elem::RefinementState p_refinement_flag =
    cast_int<Elem::RefinementState>(pflag);
#else
  in += 3;
#endif // LIBMESH_ENABLE_AMR

  // int 4: element type
  const int typeint = cast_int<int>(*in++);
  libmesh_assert_greater_equal (typeint, 0);
  libmesh_assert_less (typeint, INVALID_ELEM);
  const ElemType type =
    cast_int<ElemType>(typeint);

  const unsigned int n_nodes =
    Elem::type_to_n_nodes_map[type];

  // int 5: processor id
  const processor_id_type processor_id =
    cast_int<processor_id_type>(*in++);
  libmesh_assert (processor_id < mesh->n_processors() ||
                  processor_id == DofObject::invalid_processor_id);

  // int 6: subdomain id
  const subdomain_id_type subdomain_id =
    cast_int<subdomain_id_type>(*in++);

  // int 7: dof object id
  const dof_id_type id =
    cast_int<dof_id_type>(*in++);
  libmesh_assert_not_equal_to (id, DofObject::invalid_id);

#ifdef LIBMESH_ENABLE_UNIQUE_ID
  // int 8: dof object unique id
  const unique_id_type unique_id =
    cast_int<unique_id_type>(*in++);
#endif

#ifdef LIBMESH_ENABLE_AMR
  // int 9: parent dof object id.
  // Note: If level==0, then (*in) == invalid_id.  In
  // this case, the equality check in cast_int<unsigned>(*in) will
  // never succeed.  Therefore, we should only attempt the more
  // rigorous cast verification in cases where level != 0.
  const dof_id_type parent_id =
    (level == 0)
    ? static_cast<dof_id_type>(*in++)
    : cast_int<dof_id_type>(*in++);
  libmesh_assert (level == 0 || parent_id != DofObject::invalid_id);
  libmesh_assert (level != 0 || parent_id == DofObject::invalid_id);

  // int 10: local child id
  // Note: If level==0, then which_child_am_i is not valid, so don't
  // do the more rigorous cast verification.
  const unsigned int which_child_am_i =
    (level == 0)
    ? static_cast<unsigned int>(*in++)
    : cast_int<unsigned int>(*in++);
#else
  in += 2;
#endif // LIBMESH_ENABLE_AMR

  const dof_id_type interior_parent_id =
    static_cast<dof_id_type>(*in++);

  // Make sure we don't miscount above when adding the "magic" header
  // plus the real data header
  libmesh_assert_equal_to (in - original_in, header_size + 1);

  Elem * elem = mesh->query_elem_ptr(id);

  // if we already have this element, make sure its
  // properties match, and update any missing neighbor
  // links, but then go on
  if (elem)
    {
      libmesh_assert_equal_to (elem->level(), level);
      libmesh_assert_equal_to (elem->id(), id);
      //#ifdef LIBMESH_ENABLE_UNIQUE_ID
      // No check for unique id sanity
      //#endif
      libmesh_assert_equal_to (elem->processor_id(), processor_id);
      libmesh_assert_equal_to (elem->subdomain_id(), subdomain_id);
      libmesh_assert_equal_to (elem->type(), type);
      libmesh_assert_equal_to (elem->n_nodes(), n_nodes);

#ifndef NDEBUG
      // All our nodes should be correct
      for (unsigned int i=0; i != n_nodes; ++i)
        libmesh_assert(elem->node_id(i) ==
                       cast_int<dof_id_type>(*in++));
#else
      in += n_nodes;
#endif

#ifdef LIBMESH_ENABLE_AMR
      libmesh_assert_equal_to (elem->refinement_flag(), refinement_flag);
      libmesh_assert_equal_to (elem->has_children(), has_children);

#ifdef DEBUG
      if (elem->active())
        {
          libmesh_assert_equal_to (elem->p_level(), p_level);
          libmesh_assert_equal_to (elem->p_refinement_flag(), p_refinement_flag);
        }
#endif

      libmesh_assert (!level || elem->parent() != libmesh_nullptr);
      libmesh_assert (!level || elem->parent()->id() == parent_id);
      libmesh_assert (!level || elem->parent()->child_ptr(which_child_am_i) == elem);
#endif
      // Our interior_parent link should be "close to" correct - we
      // may have to update it, but we can check for some
      // inconsistencies.
      {
        // If the sending processor sees no interior_parent here, we'd
        // better agree.
        if (interior_parent_id == DofObject::invalid_id)
          {
            if (elem->dim() < LIBMESH_DIM)
              libmesh_assert (!(elem->interior_parent()));
          }

        // If the sending processor has a remote_elem interior_parent,
        // then all we know is that we'd better have *some*
        // interior_parent
        else if (interior_parent_id == remote_elem->id())
          {
            libmesh_assert(elem->interior_parent());
          }
        else
          {
            Elem * ip = mesh->query_elem_ptr(interior_parent_id);

            // The sending processor sees an interior parent here, so
            // if we don't have that interior element, then we'd
            // better have a remote_elem signifying that fact.
            if (!ip)
              libmesh_assert_equal_to (elem->interior_parent(), remote_elem);
            else
              {
                // The sending processor has an interior_parent here,
                // and we have that element, but that does *NOT* mean
                // we're already linking to it.  Perhaps we initially
                // received elem from a processor on which the
                // interior_parent link was remote?
                libmesh_assert(elem->interior_parent() == ip ||
                               elem->interior_parent() == remote_elem);

                // If the link was originally remote, update it
                if (elem->interior_parent() == remote_elem)
                  {
                    elem->set_interior_parent(ip);
                  }
              }
          }
      }

      // Our neighbor links should be "close to" correct - we may have
      // to update a remote_elem link, and we can check for possible
      // inconsistencies along the way.
      //
      // For subactive elements, we don't bother keeping neighbor
      // links in good shape, so there's nothing we need to set or can
      // safely assert here.
      if (!elem->subactive())
        for (auto n : elem->side_index_range())
          {
            const dof_id_type neighbor_id =
              cast_int<dof_id_type>(*in++);

            // If the sending processor sees a domain boundary here,
            // we'd better agree.
            if (neighbor_id == DofObject::invalid_id)
              {
                libmesh_assert (!(elem->neighbor_ptr(n)));
                continue;
              }

            // If the sending processor has a remote_elem neighbor here,
            // then all we know is that we'd better *not* have a domain
            // boundary.
            if (neighbor_id == remote_elem->id())
              {
                libmesh_assert(elem->neighbor_ptr(n));
                continue;
              }

            Elem * neigh = mesh->query_elem_ptr(neighbor_id);

            // The sending processor sees a neighbor here, so if we
            // don't have that neighboring element, then we'd better
            // have a remote_elem signifying that fact.
            if (!neigh)
              {
                libmesh_assert_equal_to (elem->neighbor_ptr(n), remote_elem);
                continue;
              }

            // The sending processor has a neighbor here, and we have
            // that element, but that does *NOT* mean we're already
            // linking to it.  Perhaps we initially received both elem
            // and neigh from processors on which their mutual link was
            // remote?
            libmesh_assert(elem->neighbor_ptr(n) == neigh ||
                           elem->neighbor_ptr(n) == remote_elem);

            // If the link was originally remote, we should update it,
            // and make sure the appropriate parts of its family link
            // back to us.
            if (elem->neighbor_ptr(n) == remote_elem)
              {
                elem->set_neighbor(n, neigh);

                elem->make_links_to_me_local(n);
              }
          }

      // Our p level and refinement flags should be "close to" correct
      // if we're not an active element - we might have a p level
      // increased or decreased by changes in remote_elem children.
      //
      // But if we have remote_elem children, then we shouldn't be
      // doing a projection on this inactive element on this
      // processor, so we won't need correct p settings.  Couldn't
      // hurt to update, though.
#ifdef LIBMESH_ENABLE_AMR
      if (elem->processor_id() != mesh->processor_id())
        {
          elem->hack_p_level(p_level);
          elem->set_p_refinement_flag(p_refinement_flag);
        }
#endif // LIBMESH_ENABLE_AMR

      // FIXME: We should add some debug mode tests to ensure that the
      // encoded indexing and boundary conditions are consistent.
    }
  else
    {
      // We don't already have the element, so we need to create it.

      // Find the parent if necessary
      Elem * parent = libmesh_nullptr;
#ifdef LIBMESH_ENABLE_AMR
      // Find a child element's parent
      if (level > 0)
        {
          // Note that we must be very careful to construct the send
          // connectivity so that parents are encountered before
          // children.  If we get here and can't find the parent that
          // is a fatal error.
          parent = mesh->elem_ptr(parent_id);
        }
      // Or assert that the sending processor sees no parent
      else
        libmesh_assert_equal_to (parent_id, DofObject::invalid_id);
#else
      // No non-level-0 elements without AMR
      libmesh_assert_equal_to (level, 0);
#endif

      elem = Elem::build(type,parent).release();
      libmesh_assert (elem);

#ifdef LIBMESH_ENABLE_AMR
      if (level != 0)
        {
          // Since this is a newly created element, the parent must
          // have previously thought of this child as a remote element.
          libmesh_assert_equal_to (parent->child_ptr(which_child_am_i), remote_elem);

          parent->add_child(elem, which_child_am_i);
        }

      // Assign the refinement flags and levels
      elem->set_p_level(p_level);
      elem->set_refinement_flag(refinement_flag);
      elem->set_p_refinement_flag(p_refinement_flag);
      libmesh_assert_equal_to (elem->level(), level);

      // If this element should have children, assign remote_elem to
      // all of them for now, for consistency.  Later unpacked
      // elements may overwrite that.
      if (has_children)
        {
          const unsigned int nc = elem->n_children();
          for (unsigned int c=0; c != nc; ++c)
            elem->add_child(const_cast<RemoteElem *>(remote_elem), c);
        }

#endif // LIBMESH_ENABLE_AMR

      // Assign the IDs
      elem->subdomain_id()  = subdomain_id;
      elem->processor_id()  = processor_id;
      elem->set_id()        = id;
#ifdef LIBMESH_ENABLE_UNIQUE_ID
      elem->set_unique_id() = unique_id;
#endif

      // Assign the connectivity
      libmesh_assert_equal_to (elem->n_nodes(), n_nodes);

      for (unsigned int n=0; n != n_nodes; n++)
        elem->set_node(n) =
          mesh->node_ptr
          (cast_int<dof_id_type>(*in++));

      // Set interior_parent if found
      {
        // We may be unpacking an element that was a ghost element on the
        // sender, in which case the element's interior_parent may not be
        // known by the packed element.  We'll have to set such
        // interior_parents to remote_elem ourselves and wait for a
        // later packed element to give us better information.
        if (interior_parent_id == remote_elem->id())
          {
            elem->set_interior_parent
              (const_cast<RemoteElem *>(remote_elem));
          }
        else if (interior_parent_id != DofObject::invalid_id)
          {
            // If we don't have the interior parent element, then it's
            // a remote_elem until we get it.
            Elem * ip = mesh->query_elem_ptr(interior_parent_id);
            if (!ip )
              elem->set_interior_parent
                (const_cast<RemoteElem *>(remote_elem));
            else
              elem->set_interior_parent(ip);
          }
      }

      for (auto n : elem->side_index_range())
        {
          const dof_id_type neighbor_id =
            cast_int<dof_id_type>(*in++);

          if (neighbor_id == DofObject::invalid_id)
            continue;

          // We may be unpacking an element that was a ghost element on the
          // sender, in which case the element's neighbors may not all be
          // known by the packed element.  We'll have to set such
          // neighbors to remote_elem ourselves and wait for a later
          // packed element to give us better information.
          if (neighbor_id == remote_elem->id())
            {
              elem->set_neighbor(n, const_cast<RemoteElem *>(remote_elem));
              continue;
            }

          // If we don't have the neighbor element, then it's a
          // remote_elem until we get it.
          Elem * neigh = mesh->query_elem_ptr(neighbor_id);
          if (!neigh)
            {
              elem->set_neighbor(n, const_cast<RemoteElem *>(remote_elem));
              continue;
            }

          // If we have the neighbor element, then link to it, and
          // make sure the appropriate parts of its family link back
          // to us.
          elem->set_neighbor(n, neigh);

          elem->make_links_to_me_local(n);
        }

      elem->unpack_indexing(in);
    }

  in += elem->packed_indexing_size();

  // If this is a coarse element,
  // add any element side or edge boundary condition ids
  if (level == 0)
    {
      for (auto s : elem->side_index_range())
        {
          const boundary_id_type num_bcs =
            cast_int<boundary_id_type>(*in++);

          for (boundary_id_type bc_it=0; bc_it < num_bcs; bc_it++)
            mesh->get_boundary_info().add_side
              (elem, s, cast_int<boundary_id_type>(*in++));
        }

      for (auto e : elem->edge_index_range())
        {
          const boundary_id_type num_bcs =
            cast_int<boundary_id_type>(*in++);

          for (boundary_id_type bc_it=0; bc_it < num_bcs; bc_it++)
            mesh->get_boundary_info().add_edge
              (elem, e, cast_int<boundary_id_type>(*in++));
        }

      for (unsigned short sf=0; sf != 2; ++sf)
        {
          const boundary_id_type num_bcs =
            cast_int<boundary_id_type>(*in++);

          for (boundary_id_type bc_it=0; bc_it < num_bcs; bc_it++)
            mesh->get_boundary_info().add_shellface
              (elem, sf, cast_int<boundary_id_type>(*in++));
        }
    }

  // Return the new element
  return elem;
}
예제 #10
0
void HPCoarsenTest::select_refinement (System & system)
{
  START_LOG("select_refinement()", "HPCoarsenTest");

  // The current mesh
  MeshBase & mesh = system.get_mesh();

  // The dimensionality of the mesh
  const unsigned int dim = mesh.mesh_dimension();

  // The number of variables in the system
  const unsigned int n_vars = system.n_vars();

  // The DofMap for this system
  const DofMap & dof_map = system.get_dof_map();

  // The system number (for doing bad hackery)
  const unsigned int sys_num = system.number();

  // Check for a valid component_scale
  if (!component_scale.empty())
    {
      if (component_scale.size() != n_vars)
        libmesh_error_msg("ERROR: component_scale is the wrong size:\n" \
                          << " component_scale.size()=" \
                          << component_scale.size()     \
                          << "\n n_vars=" \
                          << n_vars);
    }
  else
    {
      // No specified scaling.  Scale all variables by one.
      component_scale.resize (n_vars, 1.0);
    }

  // Resize the error_per_cell vectors to handle
  // the number of elements, initialize them to 0.
  std::vector<ErrorVectorReal> h_error_per_cell(mesh.max_elem_id(), 0.);
  std::vector<ErrorVectorReal> p_error_per_cell(mesh.max_elem_id(), 0.);

  // Loop over all the variables in the system
  for (unsigned int var=0; var<n_vars; var++)
    {
      // Possibly skip this variable
      if (!component_scale.empty())
        if (component_scale[var] == 0.0) continue;

      // The type of finite element to use for this variable
      const FEType & fe_type = dof_map.variable_type (var);

      // Finite element objects for a fine (and probably a coarse)
      // element will be needed
      fe = FEBase::build (dim, fe_type);
      fe_coarse = FEBase::build (dim, fe_type);

      // Any cached coarse element results have expired
      coarse = libmesh_nullptr;
      unsigned int cached_coarse_p_level = 0;

      const FEContinuity cont = fe->get_continuity();
      libmesh_assert (cont == DISCONTINUOUS || cont == C_ZERO ||
                      cont == C_ONE);

      // Build an appropriate quadrature rule
      qrule = fe_type.default_quadrature_rule(dim);

      // Tell the refined finite element about the quadrature
      // rule.  The coarse finite element need not know about it
      fe->attach_quadrature_rule (qrule.get());

      // We will always do the integration
      // on the fine elements.  Get their Jacobian values, etc..
      JxW = &(fe->get_JxW());
      xyz_values = &(fe->get_xyz());

      // The shape functions
      phi = &(fe->get_phi());
      phi_coarse = &(fe_coarse->get_phi());

      // The shape function derivatives
      if (cont == C_ZERO || cont == C_ONE)
        {
          dphi = &(fe->get_dphi());
          dphi_coarse = &(fe_coarse->get_dphi());
        }

#ifdef LIBMESH_ENABLE_SECOND_DERIVATIVES
      // The shape function second derivatives
      if (cont == C_ONE)
        {
          d2phi = &(fe->get_d2phi());
          d2phi_coarse = &(fe_coarse->get_d2phi());
        }
#endif // defined (LIBMESH_ENABLE_SECOND_DERIVATIVES)

      // Iterate over all the active elements in the mesh
      // that live on this processor.

      MeshBase::const_element_iterator       elem_it  =
        mesh.active_local_elements_begin();
      const MeshBase::const_element_iterator elem_end =
        mesh.active_local_elements_end();

      for (; elem_it != elem_end; ++elem_it)
        {
          const Elem * elem = *elem_it;

          // We're only checking elements that are already flagged for h
          // refinement
          if (elem->refinement_flag() != Elem::REFINE)
            continue;

          const dof_id_type e_id = elem->id();

          // Find the projection onto the parent element,
          // if necessary
          if (elem->parent() &&
              (coarse != elem->parent() ||
               cached_coarse_p_level != elem->p_level()))
            {
              Uc.resize(0);

              coarse = elem->parent();
              cached_coarse_p_level = elem->p_level();

              unsigned int old_parent_level = coarse->p_level();
              (const_cast<Elem *>(coarse))->hack_p_level(elem->p_level());

              this->add_projection(system, coarse, var);

              (const_cast<Elem *>(coarse))->hack_p_level(old_parent_level);

              // Solve the h-coarsening projection problem
              Ke.cholesky_solve(Fe, Uc);
            }

          fe->reinit(elem);

          // Get the DOF indices for the fine element
          dof_map.dof_indices (elem, dof_indices, var);

          // The number of quadrature points
          const unsigned int n_qp = qrule->n_points();

          // The number of DOFS on the fine element
          const unsigned int n_dofs =
            cast_int<unsigned int>(dof_indices.size());

          // The number of nodes on the fine element
          const unsigned int n_nodes = elem->n_nodes();

          // The average element value (used as an ugly hack
          // when we have nothing p-coarsened to compare to)
          // Real average_val = 0.;
          Number average_val = 0.;

          // Calculate this variable's contribution to the p
          // refinement error

          if (elem->p_level() == 0)
            {
              unsigned int n_vertices = 0;
              for (unsigned int n = 0; n != n_nodes; ++n)
                if (elem->is_vertex(n))
                  {
                    n_vertices++;
                    const Node * const node = elem->get_node(n);
                    average_val += system.current_solution
                      (node->dof_number(sys_num,var,0));
                  }
              average_val /= n_vertices;
            }
          else
            {
              unsigned int old_elem_level = elem->p_level();
              (const_cast<Elem *>(elem))->hack_p_level(old_elem_level - 1);

              fe_coarse->reinit(elem, &(qrule->get_points()));

              const unsigned int n_coarse_dofs =
                cast_int<unsigned int>(phi_coarse->size());

              (const_cast<Elem *>(elem))->hack_p_level(old_elem_level);

              Ke.resize(n_coarse_dofs, n_coarse_dofs);
              Ke.zero();
              Fe.resize(n_coarse_dofs);
              Fe.zero();

              // Loop over the quadrature points
              for (unsigned int qp=0; qp<qrule->n_points(); qp++)
                {
                  // The solution value at the quadrature point
                  Number val = libMesh::zero;
                  Gradient grad;
                  Tensor hess;

                  for (unsigned int i=0; i != n_dofs; i++)
                    {
                      dof_id_type dof_num = dof_indices[i];
                      val += (*phi)[i][qp] *
                        system.current_solution(dof_num);
                      if (cont == C_ZERO || cont == C_ONE)
                        grad.add_scaled((*dphi)[i][qp], system.current_solution(dof_num));
                      // grad += (*dphi)[i][qp] *
                      //  system.current_solution(dof_num);
                      if (cont == C_ONE)
                        hess.add_scaled((*d2phi)[i][qp], system.current_solution(dof_num));
                      // hess += (*d2phi)[i][qp] *
                      //  system.current_solution(dof_num);
                    }

                  // The projection matrix and vector
                  for (unsigned int i=0; i != Fe.size(); ++i)
                    {
                      Fe(i) += (*JxW)[qp] *
                        (*phi_coarse)[i][qp]*val;
                      if (cont == C_ZERO || cont == C_ONE)
                        Fe(i) += (*JxW)[qp] *
                          grad * (*dphi_coarse)[i][qp];
                      if (cont == C_ONE)
                        Fe(i) += (*JxW)[qp] *
                          hess.contract((*d2phi_coarse)[i][qp]);

                      for (unsigned int j=0; j != Fe.size(); ++j)
                        {
                          Ke(i,j) += (*JxW)[qp] *
                            (*phi_coarse)[i][qp]*(*phi_coarse)[j][qp];
                          if (cont == C_ZERO || cont == C_ONE)
                            Ke(i,j) += (*JxW)[qp] *
                              (*dphi_coarse)[i][qp]*(*dphi_coarse)[j][qp];
                          if (cont == C_ONE)
                            Ke(i,j) += (*JxW)[qp] *
                              ((*d2phi_coarse)[i][qp].contract((*d2phi_coarse)[j][qp]));
                        }
                    }
                }

              // Solve the p-coarsening projection problem
              Ke.cholesky_solve(Fe, Up);
            }

          // loop over the integration points on the fine element
          for (unsigned int qp=0; qp<n_qp; qp++)
            {
              Number value_error = 0.;
              Gradient grad_error;
              Tensor hessian_error;
              for (unsigned int i=0; i<n_dofs; i++)
                {
                  const dof_id_type dof_num = dof_indices[i];
                  value_error += (*phi)[i][qp] *
                    system.current_solution(dof_num);
                  if (cont == C_ZERO || cont == C_ONE)
                    grad_error.add_scaled((*dphi)[i][qp], system.current_solution(dof_num));
                  // grad_error += (*dphi)[i][qp] *
                  //  system.current_solution(dof_num);
                  if (cont == C_ONE)
                    hessian_error.add_scaled((*d2phi)[i][qp], system.current_solution(dof_num));
                  // hessian_error += (*d2phi)[i][qp] *
                  //    system.current_solution(dof_num);
                }
              if (elem->p_level() == 0)
                {
                  value_error -= average_val;
                }
              else
                {
                  for (unsigned int i=0; i<Up.size(); i++)
                    {
                      value_error -= (*phi_coarse)[i][qp] * Up(i);
                      if (cont == C_ZERO || cont == C_ONE)
                        grad_error.subtract_scaled((*dphi_coarse)[i][qp], Up(i));
                      // grad_error -= (*dphi_coarse)[i][qp] * Up(i);
                      if (cont == C_ONE)
                        hessian_error.subtract_scaled((*d2phi_coarse)[i][qp], Up(i));
                      // hessian_error -= (*d2phi_coarse)[i][qp] * Up(i);
                    }
                }

              p_error_per_cell[e_id] += static_cast<ErrorVectorReal>
                (component_scale[var] *
                 (*JxW)[qp] * TensorTools::norm_sq(value_error));
              if (cont == C_ZERO || cont == C_ONE)
                p_error_per_cell[e_id] += static_cast<ErrorVectorReal>
                  (component_scale[var] *
                   (*JxW)[qp] * grad_error.norm_sq());
              if (cont == C_ONE)
                p_error_per_cell[e_id] += static_cast<ErrorVectorReal>
                  (component_scale[var] *
                   (*JxW)[qp] * hessian_error.norm_sq());
            }

          // Calculate this variable's contribution to the h
          // refinement error

          if (!elem->parent())
            {
              // For now, we'll always start with an h refinement
              h_error_per_cell[e_id] =
                std::numeric_limits<ErrorVectorReal>::max() / 2;
            }
          else
            {
              FEInterface::inverse_map (dim, fe_type, coarse,
                                        *xyz_values, coarse_qpoints);

              unsigned int old_parent_level = coarse->p_level();
              (const_cast<Elem *>(coarse))->hack_p_level(elem->p_level());

              fe_coarse->reinit(coarse, &coarse_qpoints);

              (const_cast<Elem *>(coarse))->hack_p_level(old_parent_level);

              // The number of DOFS on the coarse element
              unsigned int n_coarse_dofs =
                cast_int<unsigned int>(phi_coarse->size());

              // Loop over the quadrature points
              for (unsigned int qp=0; qp<n_qp; qp++)
                {
                  // The solution difference at the quadrature point
                  Number value_error = libMesh::zero;
                  Gradient grad_error;
                  Tensor hessian_error;

                  for (unsigned int i=0; i != n_dofs; ++i)
                    {
                      const dof_id_type dof_num = dof_indices[i];
                      value_error += (*phi)[i][qp] *
                        system.current_solution(dof_num);
                      if (cont == C_ZERO || cont == C_ONE)
                        grad_error.add_scaled((*dphi)[i][qp], system.current_solution(dof_num));
                      // grad_error += (*dphi)[i][qp] *
                      //  system.current_solution(dof_num);
                      if (cont == C_ONE)
                        hessian_error.add_scaled((*d2phi)[i][qp], system.current_solution(dof_num));
                      // hessian_error += (*d2phi)[i][qp] *
                      //  system.current_solution(dof_num);
                    }

                  for (unsigned int i=0; i != n_coarse_dofs; ++i)
                    {
                      value_error -= (*phi_coarse)[i][qp] * Uc(i);
                      if (cont == C_ZERO || cont == C_ONE)
                        // grad_error -= (*dphi_coarse)[i][qp] * Uc(i);
                        grad_error.subtract_scaled((*dphi_coarse)[i][qp], Uc(i));
                      if (cont == C_ONE)
                        hessian_error.subtract_scaled((*d2phi_coarse)[i][qp], Uc(i));
                      // hessian_error -= (*d2phi_coarse)[i][qp] * Uc(i);
                    }

                  h_error_per_cell[e_id] += static_cast<ErrorVectorReal>
                    (component_scale[var] *
                     (*JxW)[qp] * TensorTools::norm_sq(value_error));
                  if (cont == C_ZERO || cont == C_ONE)
                    h_error_per_cell[e_id] += static_cast<ErrorVectorReal>
                      (component_scale[var] *
                       (*JxW)[qp] * grad_error.norm_sq());
                  if (cont == C_ONE)
                    h_error_per_cell[e_id] += static_cast<ErrorVectorReal>
                      (component_scale[var] *
                       (*JxW)[qp] * hessian_error.norm_sq());
                }

            }
        }
    }

  // Now that we've got our approximations for p_error and h_error, let's see
  // if we want to switch any h refinement flags to p refinement

  // Iterate over all the active elements in the mesh
  // that live on this processor.

  MeshBase::element_iterator       elem_it  =
    mesh.active_local_elements_begin();
  const MeshBase::element_iterator elem_end =
    mesh.active_local_elements_end();

  for (; elem_it != elem_end; ++elem_it)
    {
      Elem * elem = *elem_it;

      // We're only checking elements that are already flagged for h
      // refinement
      if (elem->refinement_flag() != Elem::REFINE)
        continue;

      const dof_id_type e_id = elem->id();

      unsigned int dofs_per_elem = 0, dofs_per_p_elem = 0;

      // Loop over all the variables in the system
      for (unsigned int var=0; var<n_vars; var++)
        {
          // The type of finite element to use for this variable
          const FEType & fe_type = dof_map.variable_type (var);

          // FIXME: we're overestimating the number of DOFs added by h
          // refinement
          FEType elem_fe_type = fe_type;
          elem_fe_type.order =
            static_cast<Order>(fe_type.order + elem->p_level());
          dofs_per_elem +=
            FEInterface::n_dofs(dim, elem_fe_type, elem->type());

          elem_fe_type.order =
            static_cast<Order>(fe_type.order + elem->p_level() + 1);
          dofs_per_p_elem +=
            FEInterface::n_dofs(dim, elem_fe_type, elem->type());
        }

      const unsigned int new_h_dofs = dofs_per_elem *
        (elem->n_children() - 1);

      const unsigned int new_p_dofs = dofs_per_p_elem -
        dofs_per_elem;

      /*
        libMesh::err << "Cell " << e_id << ": h = " << elem->hmax()
        << ", p = " << elem->p_level() + 1 << "," << std::endl
        << "     h_error = " << h_error_per_cell[e_id]
        << ", p_error = " << p_error_per_cell[e_id] << std::endl
        << "     new_h_dofs = " << new_h_dofs
        << ", new_p_dofs = " << new_p_dofs << std::endl;
      */
      const Real p_value =
        std::sqrt(p_error_per_cell[e_id]) * p_weight / new_p_dofs;
      const Real h_value =
        std::sqrt(h_error_per_cell[e_id]) /
        static_cast<Real>(new_h_dofs);
      if (p_value > h_value)
        {
          elem->set_p_refinement_flag(Elem::REFINE);
          elem->set_refinement_flag(Elem::DO_NOTHING);
        }
    }

  STOP_LOG("select_refinement()", "HPCoarsenTest");
}
예제 #11
0
//-----------------------------------------------------------------
// Mesh refinement methods
bool MeshRefinement::limit_level_mismatch_at_node (const unsigned int max_mismatch)
{
  // This function must be run on all processors at once
  parallel_object_only();

  bool flags_changed = false;


  // Vector holding the maximum element level that touches a node.
  std::vector<unsigned char> max_level_at_node (_mesh.n_nodes(), 0);
  std::vector<unsigned char> max_p_level_at_node (_mesh.n_nodes(), 0);

  // Loop over all the active elements & fill the vector
  {
    MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
    const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

    for (; elem_it != elem_end; ++elem_it)
      {
        const Elem* elem = *elem_it;
        const unsigned char elem_level =
          cast_int<unsigned char>(elem->level() +
                                  ((elem->refinement_flag() == Elem::REFINE) ? 1 : 0));
        const unsigned char elem_p_level =
          cast_int<unsigned char>(elem->p_level() +
                                  ((elem->p_refinement_flag() == Elem::REFINE) ? 1 : 0));

        // Set the max_level at each node
        for (unsigned int n=0; n<elem->n_nodes(); n++)
          {
            const dof_id_type node_number = elem->node(n);

            libmesh_assert_less (node_number, max_level_at_node.size());

            max_level_at_node[node_number] =
              std::max (max_level_at_node[node_number], elem_level);
            max_p_level_at_node[node_number] =
              std::max (max_p_level_at_node[node_number], elem_p_level);
          }
      }
  }


  // Now loop over the active elements and flag the elements
  // who violate the requested level mismatch. Alternatively, if
  // _enforce_mismatch_limit_prior_to_refinement is true, swap refinement flags
  // accordingly.
  {
    MeshBase::element_iterator       elem_it  = _mesh.active_elements_begin();
    const MeshBase::element_iterator elem_end = _mesh.active_elements_end();

    for (; elem_it != elem_end; ++elem_it)
      {
        Elem* elem = *elem_it;
        const unsigned int elem_level = elem->level();
        const unsigned int elem_p_level = elem->p_level();

        // Skip the element if it is already fully flagged
        // unless we are enforcing mismatch prior to refienemnt and may need to
        // remove the refinement flag(s)
        if (elem->refinement_flag() == Elem::REFINE &&
            elem->p_refinement_flag() == Elem::REFINE
            && !_enforce_mismatch_limit_prior_to_refinement)
          continue;

        // Loop over the nodes, check for possible mismatch
        for (unsigned int n=0; n<elem->n_nodes(); n++)
          {
            const dof_id_type node_number = elem->node(n);

            // Flag the element for refinement if it violates
            // the requested level mismatch
            if ((elem_level + max_mismatch) < max_level_at_node[node_number]
                && elem->refinement_flag() != Elem::REFINE)
              {
                elem->set_refinement_flag (Elem::REFINE);
                flags_changed = true;
              }
            if ((elem_p_level + max_mismatch) < max_p_level_at_node[node_number]
                && elem->p_refinement_flag() != Elem::REFINE)
              {
                elem->set_p_refinement_flag (Elem::REFINE);
                flags_changed = true;
              }

            // Possibly enforce limit mismatch prior to refinement
            flags_changed |= this->enforce_mismatch_limit_prior_to_refinement(elem, POINT, max_mismatch);
          }
      }
  }

  // If flags changed on any processor then they changed globally
  this->comm().max(flags_changed);

  return flags_changed;
}