void ZONE_CONTAINER::buildFeatureHoleList( BOARD* aPcb, SHAPE_POLY_SET& aFeatures )
{
int segsPerCircle;
double correctionFactor;
// Set the number of segments in arc approximations
if( m_ArcToSegmentsCount == ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF )
segsPerCircle = ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF;
else
segsPerCircle = ARC_APPROX_SEGMENTS_COUNT_LOW_DEF;
/* calculates the coeff to compensate radius reduction of holes clearance
* due to the segment approx.
* For a circle the min radius is radius * cos( 2PI / s_CircleToSegmentsCount / 2)
* s_Correction is 1 /cos( PI/s_CircleToSegmentsCount )
*/
correctionFactor = 1.0 / cos( M_PI / (double) segsPerCircle );
aFeatures.RemoveAllContours();
int outline_half_thickness = m_ZoneMinThickness / 2;
int zone_clearance = std::max( m_ZoneClearance, GetClearance() );
zone_clearance += outline_half_thickness;
/* store holes (i.e. tracks and pads areas as polygons outlines)
* in a polygon list
*/
/* items ouside the zone bounding box are skipped
* the bounding box is the zone bounding box + the biggest clearance found in Netclass list
*/
EDA_RECT item_boundingbox;
EDA_RECT zone_boundingbox = GetBoundingBox();
int biggest_clearance = aPcb->GetDesignSettings().GetBiggestClearanceValue();
biggest_clearance = std::max( biggest_clearance, zone_clearance );
zone_boundingbox.Inflate( biggest_clearance );
/*
* First : Add pads. Note: pads having the same net as zone are left in zone.
* Thermal shapes will be created later if necessary
*/
int item_clearance;
/* Use a dummy pad to calculate hole clerance when a pad is not on all copper layers
* and this pad has a hole
* This dummy pad has the size and shape of the hole
* Therefore, this dummy pad is a circle or an oval.
* A pad must have a parent because some functions expect a non null parent
* to find the parent board, and some other data
*/
MODULE dummymodule( aPcb ); // Creates a dummy parent
D_PAD dummypad( &dummymodule );
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
D_PAD* nextpad;
for( D_PAD* pad = module->Pads(); pad != NULL; pad = nextpad )
{
nextpad = pad->Next(); // pad pointer can be modified by next code, so
// calculate the next pad here
if( !pad->IsOnLayer( GetLayer() ) )
{
/* Test for pads that are on top or bottom only and have a hole.
* There are curious pads but they can be used for some components that are
* inside the board (in fact inside the hole. Some photo diodes and Leds are
* like this)
*/
if( pad->GetDrillSize().x == 0 && pad->GetDrillSize().y == 0 )
continue;
// Use a dummy pad to calculate a hole shape that have the same dimension as
// the pad hole
dummypad.SetSize( pad->GetDrillSize() );
dummypad.SetOrientation( pad->GetOrientation() );
dummypad.SetShape( pad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG ?
PAD_SHAPE_OVAL : PAD_SHAPE_CIRCLE );
dummypad.SetPosition( pad->GetPosition() );
pad = &dummypad;
}
// Note: netcode <=0 means not connected item
if( ( pad->GetNetCode() != GetNetCode() ) || ( pad->GetNetCode() <= 0 ) )
{
item_clearance = pad->GetClearance() + outline_half_thickness;
item_boundingbox = pad->GetBoundingBox();
item_boundingbox.Inflate( item_clearance );
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
int clearance = std::max( zone_clearance, item_clearance );
pad->TransformShapeWithClearanceToPolygon( aFeatures,
clearance,
segsPerCircle,
correctionFactor );
}
continue;
}
// Pads are removed from zone if the setup is PAD_ZONE_CONN_NONE
if( GetPadConnection( pad ) == PAD_ZONE_CONN_NONE )
{
int gap = zone_clearance;
int thermalGap = GetThermalReliefGap( pad );
gap = std::max( gap, thermalGap );
item_boundingbox = pad->GetBoundingBox();
item_boundingbox.Inflate( gap );
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
pad->TransformShapeWithClearanceToPolygon( aFeatures,
gap,
segsPerCircle,
correctionFactor );
}
}
}
}
/* Add holes (i.e. tracks and vias areas as polygons outlines)
* in cornerBufferPolysToSubstract
*/
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( !track->IsOnLayer( GetLayer() ) )
continue;
if( track->GetNetCode() == GetNetCode() && (GetNetCode() != 0) )
continue;
item_clearance = track->GetClearance() + outline_half_thickness;
item_boundingbox = track->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
int clearance = std::max( zone_clearance, item_clearance );
track->TransformShapeWithClearanceToPolygon( aFeatures,
clearance,
segsPerCircle,
correctionFactor );
}
}
/* Add module edge items that are on copper layers
* Pcbnew allows these items to be on copper layers in microwave applictions
* This is a bad thing, but must be handled here, until a better way is found
*/
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( !item->IsOnLayer( GetLayer() ) && !item->IsOnLayer( Edge_Cuts ) )
continue;
if( item->Type() != PCB_MODULE_EDGE_T )
continue;
item_boundingbox = item->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
( (EDGE_MODULE*) item )->TransformShapeWithClearanceToPolygon(
aFeatures, zone_clearance,
segsPerCircle, correctionFactor );
}
}
}
// Add graphic items (copper texts) and board edges
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
if( item->GetLayer() != GetLayer() && item->GetLayer() != Edge_Cuts )
continue;
switch( item->Type() )
{
case PCB_LINE_T:
( (DRAWSEGMENT*) item )->TransformShapeWithClearanceToPolygon(
aFeatures,
zone_clearance, segsPerCircle, correctionFactor );
break;
case PCB_TEXT_T:
( (TEXTE_PCB*) item )->TransformBoundingBoxWithClearanceToPolygon(
aFeatures, zone_clearance );
break;
default:
break;
}
}
// Add zones outlines having an higher priority and keepout
for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = GetBoard()->GetArea( ii );
if( zone->GetLayer() != GetLayer() )
continue;
if( !zone->GetIsKeepout() && zone->GetPriority() <= GetPriority() )
continue;
if( zone->GetIsKeepout() && ! zone->GetDoNotAllowCopperPour() )
continue;
// A highter priority zone or keepout area is found: remove this area
item_boundingbox = zone->GetBoundingBox();
if( !item_boundingbox.Intersects( zone_boundingbox ) )
continue;
// Add the zone outline area.
// However if the zone has the same net as the current zone,
// do not add any clearance.
// the zone will be connected to the current zone, but filled areas
// will use different parameters (clearance, thermal shapes )
bool same_net = GetNetCode() == zone->GetNetCode();
bool use_net_clearance = true;
int min_clearance = zone_clearance;
// Do not forget to make room to draw the thick outlines
// of the hole created by the area of the zone to remove
int holeclearance = zone->GetClearance() + outline_half_thickness;
// The final clearance is obviously the max value of each zone clearance
min_clearance = std::max( min_clearance, holeclearance );
if( zone->GetIsKeepout() || same_net )
{
// Just take in account the fact the outline has a thickness, so
// the actual area to substract is inflated to take in account this fact
min_clearance = outline_half_thickness;
use_net_clearance = false;
}
zone->TransformOutlinesShapeWithClearanceToPolygon(
aFeatures,
min_clearance, use_net_clearance );
}
// Remove thermal symbols
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad != NULL; pad = pad->Next() )
{
// Rejects non-standard pads with tht-only thermal reliefs
if( GetPadConnection( pad ) == PAD_ZONE_CONN_THT_THERMAL
&& pad->GetAttribute() != PAD_ATTRIB_STANDARD )
continue;
if( GetPadConnection( pad ) != PAD_ZONE_CONN_THERMAL
&& GetPadConnection( pad ) != PAD_ZONE_CONN_THT_THERMAL )
continue;
if( !pad->IsOnLayer( GetLayer() ) )
continue;
if( pad->GetNetCode() != GetNetCode() )
continue;
item_boundingbox = pad->GetBoundingBox();
int thermalGap = GetThermalReliefGap( pad );
item_boundingbox.Inflate( thermalGap, thermalGap );
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
CreateThermalReliefPadPolygon( aFeatures,
*pad, thermalGap,
GetThermalReliefCopperBridge( pad ),
m_ZoneMinThickness,
segsPerCircle,
correctionFactor, s_thermalRot );
}
}
}
}
void ZONE_FILLER::buildZoneFeatureHoleList( const ZONE_CONTAINER* aZone,
SHAPE_POLY_SET& aFeatures ) const
{
int segsPerCircle;
double correctionFactor;
// Set the number of segments in arc approximations
if( aZone->GetArcSegmentCount() == ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF )
segsPerCircle = ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF;
else
segsPerCircle = ARC_APPROX_SEGMENTS_COUNT_LOW_DEF;
/* calculates the coeff to compensate radius reduction of holes clearance
* due to the segment approx.
* For a circle the min radius is radius * cos( 2PI / s_CircleToSegmentsCount / 2)
* s_Correction is 1 /cos( PI/s_CircleToSegmentsCount )
*/
correctionFactor = 1.0 / cos( M_PI / (double) segsPerCircle );
aFeatures.RemoveAllContours();
int outline_half_thickness = aZone->GetMinThickness() / 2;
// When removing holes, the holes must be expanded by outline_half_thickness
// to take in account the thickness of the zone outlines
int zone_clearance = aZone->GetClearance() + outline_half_thickness;
// When holes are created by non copper items (edge cut items), use only
// the m_ZoneClearance parameter (zone clearance with no netclass clearance)
int zone_to_edgecut_clearance = aZone->GetZoneClearance() + outline_half_thickness;
/* store holes (i.e. tracks and pads areas as polygons outlines)
* in a polygon list
*/
/* items ouside the zone bounding box are skipped
* the bounding box is the zone bounding box + the biggest clearance found in Netclass list
*/
EDA_RECT item_boundingbox;
EDA_RECT zone_boundingbox = aZone->GetBoundingBox();
int biggest_clearance = m_board->GetDesignSettings().GetBiggestClearanceValue();
biggest_clearance = std::max( biggest_clearance, zone_clearance );
zone_boundingbox.Inflate( biggest_clearance );
/*
* First : Add pads. Note: pads having the same net as zone are left in zone.
* Thermal shapes will be created later if necessary
*/
/* Use a dummy pad to calculate hole clearance when a pad is not on all copper layers
* and this pad has a hole
* This dummy pad has the size and shape of the hole
* Therefore, this dummy pad is a circle or an oval.
* A pad must have a parent because some functions expect a non null parent
* to find the parent board, and some other data
*/
MODULE dummymodule( m_board ); // Creates a dummy parent
D_PAD dummypad( &dummymodule );
for( MODULE* module = m_board->m_Modules; module; module = module->Next() )
{
D_PAD* nextpad;
for( D_PAD* pad = module->PadsList(); pad != NULL; pad = nextpad )
{
nextpad = pad->Next(); // pad pointer can be modified by next code, so
// calculate the next pad here
if( !pad->IsOnLayer( aZone->GetLayer() ) )
{
/* Test for pads that are on top or bottom only and have a hole.
* There are curious pads but they can be used for some components that are
* inside the board (in fact inside the hole. Some photo diodes and Leds are
* like this)
*/
if( pad->GetDrillSize().x == 0 && pad->GetDrillSize().y == 0 )
continue;
// Use a dummy pad to calculate a hole shape that have the same dimension as
// the pad hole
dummypad.SetSize( pad->GetDrillSize() );
dummypad.SetOrientation( pad->GetOrientation() );
dummypad.SetShape( pad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG ?
PAD_SHAPE_OVAL : PAD_SHAPE_CIRCLE );
dummypad.SetPosition( pad->GetPosition() );
pad = &dummypad;
}
// Note: netcode <=0 means not connected item
if( ( pad->GetNetCode() != aZone->GetNetCode() ) || ( pad->GetNetCode() <= 0 ) )
{
int item_clearance = pad->GetClearance() + outline_half_thickness;
item_boundingbox = pad->GetBoundingBox();
item_boundingbox.Inflate( item_clearance );
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
int clearance = std::max( zone_clearance, item_clearance );
// PAD_SHAPE_CUSTOM can have a specific keepout, to avoid to break the shape
if( pad->GetShape() == PAD_SHAPE_CUSTOM
&& pad->GetCustomShapeInZoneOpt() == CUST_PAD_SHAPE_IN_ZONE_CONVEXHULL )
{
// the pad shape in zone can be its convex hull or
// the shape itself
SHAPE_POLY_SET outline( pad->GetCustomShapeAsPolygon() );
outline.Inflate( KiROUND( clearance * correctionFactor ), segsPerCircle );
pad->CustomShapeAsPolygonToBoardPosition( &outline,
pad->GetPosition(), pad->GetOrientation() );
if( pad->GetCustomShapeInZoneOpt() == CUST_PAD_SHAPE_IN_ZONE_CONVEXHULL )
{
std::vector<wxPoint> convex_hull;
BuildConvexHull( convex_hull, outline );
aFeatures.NewOutline();
for( unsigned ii = 0; ii < convex_hull.size(); ++ii )
aFeatures.Append( convex_hull[ii] );
}
else
aFeatures.Append( outline );
}
else
pad->TransformShapeWithClearanceToPolygon( aFeatures,
clearance,
segsPerCircle,
correctionFactor );
}
continue;
}
// Pads are removed from zone if the setup is PAD_ZONE_CONN_NONE
// or if they have a custom shape, because a thermal relief will break
// the shape
if( aZone->GetPadConnection( pad ) == PAD_ZONE_CONN_NONE
|| pad->GetShape() == PAD_SHAPE_CUSTOM )
{
int gap = zone_clearance;
int thermalGap = aZone->GetThermalReliefGap( pad );
gap = std::max( gap, thermalGap );
item_boundingbox = pad->GetBoundingBox();
item_boundingbox.Inflate( gap );
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
// PAD_SHAPE_CUSTOM has a specific keepout, to avoid to break the shape
// the pad shape in zone can be its convex hull or the shape itself
if( pad->GetShape() == PAD_SHAPE_CUSTOM
&& pad->GetCustomShapeInZoneOpt() == CUST_PAD_SHAPE_IN_ZONE_CONVEXHULL )
{
// the pad shape in zone can be its convex hull or
// the shape itself
SHAPE_POLY_SET outline( pad->GetCustomShapeAsPolygon() );
outline.Inflate( KiROUND( gap * correctionFactor ), segsPerCircle );
pad->CustomShapeAsPolygonToBoardPosition( &outline,
pad->GetPosition(), pad->GetOrientation() );
std::vector<wxPoint> convex_hull;
BuildConvexHull( convex_hull, outline );
aFeatures.NewOutline();
for( unsigned ii = 0; ii < convex_hull.size(); ++ii )
aFeatures.Append( convex_hull[ii] );
}
else
pad->TransformShapeWithClearanceToPolygon( aFeatures,
gap, segsPerCircle, correctionFactor );
}
}
}
}
/* Add holes (i.e. tracks and vias areas as polygons outlines)
* in cornerBufferPolysToSubstract
*/
for( auto track : m_board->Tracks() )
{
if( !track->IsOnLayer( aZone->GetLayer() ) )
continue;
if( track->GetNetCode() == aZone->GetNetCode() && ( aZone->GetNetCode() != 0) )
continue;
int item_clearance = track->GetClearance() + outline_half_thickness;
item_boundingbox = track->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
int clearance = std::max( zone_clearance, item_clearance );
track->TransformShapeWithClearanceToPolygon( aFeatures,
clearance,
segsPerCircle,
correctionFactor );
}
}
/* Add module edge items that are on copper layers
* Pcbnew allows these items to be on copper layers in microwave applictions
* This is a bad thing, but must be handled here, until a better way is found
*/
for( auto module : m_board->Modules() )
{
for( auto item : module->GraphicalItems() )
{
if( !item->IsOnLayer( aZone->GetLayer() ) && !item->IsOnLayer( Edge_Cuts ) )
continue;
if( item->Type() != PCB_MODULE_EDGE_T )
continue;
item_boundingbox = item->GetBoundingBox();
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
int zclearance = zone_clearance;
if( item->IsOnLayer( Edge_Cuts ) )
// use only the m_ZoneClearance, not the clearance using
// the netclass value, because we do not have a copper item
zclearance = zone_to_edgecut_clearance;
( (EDGE_MODULE*) item )->TransformShapeWithClearanceToPolygon(
aFeatures, zclearance, segsPerCircle, correctionFactor );
}
}
}
// Add graphic items (copper texts) and board edges
// Currently copper texts have no net, so only the zone_clearance
// is used.
for( auto item : m_board->Drawings() )
{
if( item->GetLayer() != aZone->GetLayer() && item->GetLayer() != Edge_Cuts )
continue;
int zclearance = zone_clearance;
if( item->GetLayer() == Edge_Cuts )
// use only the m_ZoneClearance, not the clearance using
// the netclass value, because we do not have a copper item
zclearance = zone_to_edgecut_clearance;
switch( item->Type() )
{
case PCB_LINE_T:
( (DRAWSEGMENT*) item )->TransformShapeWithClearanceToPolygon(
aFeatures,
zclearance, segsPerCircle, correctionFactor );
break;
case PCB_TEXT_T:
( (TEXTE_PCB*) item )->TransformBoundingBoxWithClearanceToPolygon(
aFeatures, zclearance );
break;
default:
break;
}
}
// Add zones outlines having an higher priority and keepout
for( int ii = 0; ii < m_board->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = m_board->GetArea( ii );
// If the zones share no common layers
if( !aZone->CommonLayerExists( zone->GetLayerSet() ) )
continue;
if( !zone->GetIsKeepout() && zone->GetPriority() <= aZone->GetPriority() )
continue;
if( zone->GetIsKeepout() && !zone->GetDoNotAllowCopperPour() )
continue;
// A highter priority zone or keepout area is found: remove this area
item_boundingbox = zone->GetBoundingBox();
if( !item_boundingbox.Intersects( zone_boundingbox ) )
continue;
// Add the zone outline area.
// However if the zone has the same net as the current zone,
// do not add any clearance.
// the zone will be connected to the current zone, but filled areas
// will use different parameters (clearance, thermal shapes )
bool same_net = aZone->GetNetCode() == zone->GetNetCode();
bool use_net_clearance = true;
int min_clearance = zone_clearance;
// Do not forget to make room to draw the thick outlines
// of the hole created by the area of the zone to remove
int holeclearance = zone->GetClearance() + outline_half_thickness;
// The final clearance is obviously the max value of each zone clearance
min_clearance = std::max( min_clearance, holeclearance );
if( zone->GetIsKeepout() || same_net )
{
// Just take in account the fact the outline has a thickness, so
// the actual area to substract is inflated to take in account this fact
min_clearance = outline_half_thickness;
use_net_clearance = false;
}
zone->TransformOutlinesShapeWithClearanceToPolygon(
aFeatures, min_clearance, use_net_clearance );
}
// Remove thermal symbols
for( auto module : m_board->Modules() )
{
for( auto pad : module->Pads() )
{
// Rejects non-standard pads with tht-only thermal reliefs
if( aZone->GetPadConnection( pad ) == PAD_ZONE_CONN_THT_THERMAL
&& pad->GetAttribute() != PAD_ATTRIB_STANDARD )
continue;
if( aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THERMAL
&& aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THT_THERMAL )
continue;
if( !pad->IsOnLayer( aZone->GetLayer() ) )
continue;
if( pad->GetNetCode() != aZone->GetNetCode() )
continue;
item_boundingbox = pad->GetBoundingBox();
int thermalGap = aZone->GetThermalReliefGap( pad );
item_boundingbox.Inflate( thermalGap, thermalGap );
if( item_boundingbox.Intersects( zone_boundingbox ) )
{
CreateThermalReliefPadPolygon( aFeatures,
*pad, thermalGap,
aZone->GetThermalReliefCopperBridge( pad ),
aZone->GetMinThickness(),
segsPerCircle,
correctionFactor, s_thermalRot );
}
}
}
}
