Пример #1
0
int PCB_EDIT_FRAME::Delete_LastCreatedCorner( wxDC* DC )
{
    ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour;

    if( !zone )
        return 0;

    if( !zone->GetNumCorners() )
        return 0;

    zone->DrawWhileCreateOutline( m_canvas, DC, GR_XOR );

    if( zone->GetNumCorners() > 2 )
    {
        zone->m_Poly->DeleteCorner( zone->GetNumCorners() - 1 );

        if( m_canvas->IsMouseCaptured() )
            m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
    }
    else
    {
        m_canvas->SetMouseCapture( NULL, NULL );
        SetCurItem( NULL );
        zone->RemoveAllContours();
        zone->ClearFlags();
    }

    return zone->GetNumCorners();
}
Пример #2
0
/* Redraws the zone outlines when moving mouse
 */
static void Show_New_Edge_While_Move_Mouse( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
                                            const wxPoint& aPosition, bool aErase )
{
    PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) aPanel->GetParent();
    wxPoint         c_pos    = pcbframe->GetScreen()->GetCrossHairPosition();
    ZONE_CONTAINER* zone = pcbframe->GetBoard()->m_CurrentZoneContour;

    if( !zone )
        return;

    int icorner = zone->GetNumCorners() - 1;

    if( icorner < 1 )
        return;     // We must have 2 (or more) corners

    if( aErase )    // Undraw edge in old position
    {
        zone->DrawWhileCreateOutline( aPanel, aDC );
    }

    // Redraw the current edge in its new position
    if( pcbframe->GetZoneSettings().m_Zone_45_Only )
    {
        // calculate the new position as allowed
        wxPoint StartPoint = zone->GetCornerPosition( icorner - 1 );
        CalculateSegmentEndPoint( c_pos, StartPoint.x, StartPoint.y, &c_pos.x, &c_pos.y );
    }

    zone->SetCornerPosition( icorner, c_pos );

    zone->DrawWhileCreateOutline( aPanel, aDC );
}
Пример #3
0
/**
 * Process an area that has been modified, by clipping its polygon against
 * itself and the polygons for any other areas on the same net.
 * This may change the number and order of copper areas in the net.
 * @param aModifiedZonesList = a PICKED_ITEMS_LIST * where to store deleted or added areas
 *                             (useful in undo commands can be NULL
 * @param modified_area = area to test
 * @param  bMessageBoxArc if true, shows message when clipping can't be done due to arcs.
 * @param bMessageBoxInt == true, shows message when clipping occurs.
 * @return :
 * -1 if arcs intersect other sides, so polygon can't be clipped
 *  0 if no intersecting sides
 *  1 if intersecting sides, polygon clipped
 */
int BOARD::AreaPolygonModified( PICKED_ITEMS_LIST* aModifiedZonesList,
                                ZONE_CONTAINER* modified_area,
                                bool            bMessageBoxArc,
                                bool            bMessageBoxInt )
{
    // clip polygon against itself
    int test = ClipAreaPolygon( aModifiedZonesList, modified_area, bMessageBoxArc, bMessageBoxInt );

    if( test == -1 )
        return test;

    // now see if we need to clip against other areas
    int  layer = modified_area->GetLayer();
    bool bCheckAllAreas = false;

    if( test == 1 )
        bCheckAllAreas = true;
    else
        bCheckAllAreas = TestAreaIntersections( modified_area );

    if( bCheckAllAreas )
        CombineAllAreasInNet( aModifiedZonesList, modified_area->GetNet(), bMessageBoxInt, true );

    if( layer >= FIRST_NO_COPPER_LAYER )    // Refill non copper zones on this layer
    {
        if( m_ZoneDescriptorList.size() > 0 )
        {
            for( unsigned ia = 0; ia < m_ZoneDescriptorList.size(); ia++ )
                if( m_ZoneDescriptorList[ia]->GetLayer() == layer )
                    m_ZoneDescriptorList[ia]->BuildFilledPolysListData( this );
        }
    }

    // Test for bad areas: all zones must have more than 2 corners:
    // Note: should not happen, but just in case.
    for( unsigned ia1 = 0; ia1 < m_ZoneDescriptorList.size() - 1; )
    {
        ZONE_CONTAINER* zone = m_ZoneDescriptorList[ia1];

        if( zone->GetNumCorners() >= 3 )
            ia1++;
        else               // Remove zone because it is incorrect:
            RemoveArea( aModifiedZonesList, zone );
    }

    return test;
}
bool BOARD::OnAreaPolygonModified( PICKED_ITEMS_LIST* aModifiedZonesList,
                                   ZONE_CONTAINER* modified_area )
{
    // clip polygon against itself
    bool modified = NormalizeAreaPolygon( aModifiedZonesList, modified_area );

    // now see if we need to clip against other areas
    /*
    LAYER_NUM layer = modified_area->GetLayer();
    */

    bool bCheckAllAreas = TestAreaIntersections( modified_area );

    if( bCheckAllAreas )
    {
        modified = true;
        CombineAllAreasInNet( aModifiedZonesList, modified_area->GetNetCode(), true );
    }

    /*

    FIXME : do we really need this?

    if( !IsCopperLayer( layer ) )       // Refill non copper zones on this layer
    {
        for( unsigned ia = 0; ia < m_ZoneDescriptorList.size(); ia++ )
            if( m_ZoneDescriptorList[ia]->GetLayer() == layer )
                m_ZoneDescriptorList[ia]->BuildFilledSolidAreasPolygons( this );
    }

    */

    // Test for bad areas: all zones must have more than 2 corners:
    // Note: should not happen, but just in case.
    for( unsigned ii = 0; ii < m_ZoneDescriptorList.size(); )
    {
        ZONE_CONTAINER* zone = m_ZoneDescriptorList[ii];

        if( zone->GetNumCorners() >= 3 )
            ii++;
        else               // Remove zone because it is incorrect:
            RemoveArea( aModifiedZonesList, zone );
    }

    return modified;
}
Пример #5
0
bool POINT_EDITOR::removeCornerCondition( const SELECTION& )
{
    if( !m_editPoints )
        return false;

    EDA_ITEM* item = m_editPoints->GetParent();

    if( item->Type() != PCB_ZONE_AREA_T )
        return false;

    ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );

    if( zone->GetNumCorners() <= 3 )
        return false;

    // Remove corner does not work with lines
    if( dynamic_cast<EDIT_LINE*>( m_editedPoint ) )
        return false;

    return m_editedPoint != NULL;
}
Пример #6
0
bool PCB_EDIT_FRAME::End_Zone( wxDC* DC )
{
    ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour;

    if( !zone )
        return true;

    // Validate the current outline:
    if( zone->GetNumCorners() <= 2 )   // An outline must have 3 corners or more
    {
        Abort_Zone_Create_Outline( m_canvas, DC );
        return true;
    }

    // Remove the last corner if is is at the same location as the prevoius corner
    zone->m_Poly->RemoveNullSegments();

    // Validate the current edge:
    int icorner = zone->GetNumCorners() - 1;
    if( zone->IsOnCopperLayer() )
    {
        if( Drc_On && m_drc->Drc( zone, icorner - 1 ) == BAD_DRC )  // we can't validate last edge
            return false;

        if( Drc_On && m_drc->Drc( zone, icorner ) == BAD_DRC )      // we can't validate the closing edge
        {
            DisplayError( this,
                          _( "DRC error: closing this area creates a drc error with an other area" ) );
            m_canvas->MoveCursorToCrossHair();
            return false;
        }
    }

    zone->ClearFlags();

    zone->DrawWhileCreateOutline( m_canvas, DC, GR_XOR );

    m_canvas->SetMouseCapture( NULL, NULL );

    // Undraw old drawings, because they can have important changes
    int layer = zone->GetLayer();
    GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_XOR, layer );
    GetBoard()->RedrawFilledAreas( m_canvas, DC, GR_XOR, layer );

    // Save initial zones configuration, for undo/redo, before adding new zone
    s_AuxiliaryList.ClearListAndDeleteItems();
    s_PickedList.ClearListAndDeleteItems();
    SaveCopyOfZones(s_PickedList, GetBoard(), zone->GetNet(), zone->GetLayer() );

    // Put new zone in list
    if( !s_CurrentZone )
    {
        zone->m_Poly->CloseLastContour(); // Close the current corner list
        GetBoard()->Add( zone );
        GetBoard()->m_CurrentZoneContour = NULL;

        // Add this zone in picked list, as new item
        ITEM_PICKER picker( zone, UR_NEW );
        s_PickedList.PushItem( picker );
    }
    else    // Append this outline as a cutout to an existing zone
    {
        for( int ii = 0; ii < zone->GetNumCorners(); ii++ )
        {
            s_CurrentZone->AppendCorner( zone->GetCornerPosition( ii ) );
        }

        s_CurrentZone->m_Poly->CloseLastContour(); // Close the current corner list
        zone->RemoveAllContours();      // All corners are copied in s_CurrentZone. Free corner list.
        zone = s_CurrentZone;
    }

    s_AddCutoutToCurrentZone = false;
    s_CurrentZone = NULL;

    GetScreen()->SetCurItem( NULL );       // This outline can be deleted when merging outlines

    // Combine zones if possible :
    GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, zone );

    // Redraw the real edge zone :
    GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_OR, layer );
    GetBoard()->RedrawFilledAreas( m_canvas, DC, GR_OR, layer );

    int ii = GetBoard()->GetAreaIndex( zone );   // test if zone exists

    if( ii < 0 )
        zone = NULL;                        // was removed by combining zones

    int error_count = GetBoard()->Test_Drc_Areas_Outlines_To_Areas_Outlines( zone, true );

    if( error_count )
    {
        DisplayError( this, _( "Area: DRC outline error" ) );
    }

    UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
    SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED);
    s_PickedList.ClearItemsList(); // s_ItemsListPicker is no more owner of picked items

    OnModify();
    return true;
}
Пример #7
0
int PCB_EDIT_FRAME::Begin_Zone( wxDC* DC )
{
    ZONE_SETTINGS zoneInfo = GetZoneSettings();

    // verify if s_CurrentZone exists (could be deleted since last selection) :
    int ii;
    for( ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
    {
        if( s_CurrentZone == GetBoard()->GetArea( ii ) )
            break;
    }

    if( ii >= GetBoard()->GetAreaCount() ) // Not found: could be deleted since last selection
    {
        s_AddCutoutToCurrentZone = false;
        s_CurrentZone = NULL;
    }

    // If no zone contour in progress, a new zone is being created:
    if( !GetBoard()->m_CurrentZoneContour )
    {
        if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT &&
            getActiveLayer() >= FIRST_NON_COPPER_LAYER )
        {
            DisplayError( this,
                          _( "Error: a keepout area is allowed only on copper layers" ) );
            return 0;
        }
        else
            GetBoard()->m_CurrentZoneContour = new ZONE_CONTAINER( GetBoard() );
    }

    ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour;

    if( zone->GetNumCorners() == 0 )    // Start a new contour: init zone params (net, layer ...)
    {
        if( !s_CurrentZone )            // A new outline is created, from scratch
        {
            ZONE_EDIT_T edited;

            // Init zone params to reasonable values
            zone->SetLayer( getActiveLayer() );

            // Prompt user for parameters:
            m_canvas->SetIgnoreMouseEvents( true );

            if( zone->IsOnCopperLayer() )
            {
                // Put a zone on a copper layer
                if( GetBoard()->GetHighLightNetCode() > 0 )
                {
                    zoneInfo.m_NetcodeSelection = GetBoard()->GetHighLightNetCode();

                    zone->SetNet( zoneInfo.m_NetcodeSelection );
                    zone->SetNetNameFromNetCode( );
                }
                double tmp = ZONE_THERMAL_RELIEF_GAP_MIL;
                wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_GAP_STRING_KEY, &tmp );
                zoneInfo.m_ThermalReliefGap = KiROUND( tmp * IU_PER_MILS);

                tmp = ZONE_THERMAL_RELIEF_COPPER_WIDTH_MIL;
                wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY,
                                                &tmp );
                zoneInfo.m_ThermalReliefCopperBridge = KiROUND( tmp * IU_PER_MILS );

                tmp = ZONE_CLEARANCE_MIL;
                wxGetApp().GetSettings()->Read( ZONE_CLEARANCE_WIDTH_STRING_KEY,
                                                &tmp );
                zoneInfo.m_ZoneClearance = KiROUND( tmp * IU_PER_MILS );

                tmp = ZONE_THICKNESS_MIL;
                wxGetApp().GetSettings()->Read( ZONE_MIN_THICKNESS_WIDTH_STRING_KEY,
                                                &tmp );
                zoneInfo.m_ZoneMinThickness = KiROUND( tmp * IU_PER_MILS );

                zoneInfo.m_CurrentZone_Layer = zone->GetLayer();

                if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT )
                {
                    zoneInfo.SetIsKeepout( true );
                    edited = InvokeKeepoutAreaEditor( this, &zoneInfo );
                }
                else
                {
                    zoneInfo.SetIsKeepout( false );
                    edited = InvokeCopperZonesEditor( this, &zoneInfo );
                }
            }
            else   // Put a zone on a non copper layer (technical layer)
            {
                zoneInfo.SetIsKeepout( false );
                zoneInfo.m_NetcodeSelection = 0;     // No net for non copper zones
                edited = InvokeNonCopperZonesEditor( this, zone, &zoneInfo );
            }

            m_canvas->MoveCursorToCrossHair();
            m_canvas->SetIgnoreMouseEvents( false );

            if( edited == ZONE_ABORT )
                return 0;

            // Switch active layer to the selected zone layer
            setActiveLayer( zoneInfo.m_CurrentZone_Layer );

            SetZoneSettings( zoneInfo );
        }
        else
        {
            // Start a new contour: init zone params (net and layer) from an existing
            // zone (add cutout or similar zone)

            zoneInfo.m_CurrentZone_Layer = s_CurrentZone->GetLayer();
            setActiveLayer( s_CurrentZone->GetLayer() );

            zoneInfo << *s_CurrentZone;

            SetZoneSettings( zoneInfo );
        }

        // Show the Net for zones on copper layers
        if( zoneInfo.m_CurrentZone_Layer < FIRST_NO_COPPER_LAYER &&
            ! zoneInfo.GetIsKeepout() )
        {
            if( s_CurrentZone )
            {
                zoneInfo.m_NetcodeSelection = s_CurrentZone->GetNet();
                GetBoard()->SetZoneSettings( zoneInfo );
            }

            if( GetBoard()->IsHighLightNetON() )
            {
                HighLight( DC );    // Remove old highlight selection
            }

            GetBoard()->SetHighLightNet( zoneInfo.m_NetcodeSelection );
            HighLight( DC );
        }

        if( !s_AddCutoutToCurrentZone )
            s_CurrentZone = NULL; // the zone is used only once ("add similar zone" command)
    }

    // if first segment
    if( zone->GetNumCorners() == 0 )
    {
        zone->SetFlags( IS_NEW );
        zone->SetTimeStamp( GetNewTimeStamp() );

        zoneInfo.ExportSetting( *zone );

        zone->m_Poly->Start( zoneInfo.m_CurrentZone_Layer,
                             GetScreen()->GetCrossHairPosition().x,
                             GetScreen()->GetCrossHairPosition().y,
                             zone->GetHatchStyle() );

        zone->AppendCorner( GetScreen()->GetCrossHairPosition() );

        if( Drc_On && (m_drc->Drc( zone, 0 ) == BAD_DRC) && zone->IsOnCopperLayer() )
        {
            zone->ClearFlags();
            zone->RemoveAllContours();

            // use the form of SetCurItem() which does not write to the msg panel,
            // SCREEN::SetCurItem(), so the DRC error remains on screen.
            // PCB_EDIT_FRAME::SetCurItem() calls DisplayInfo().
            GetScreen()->SetCurItem( NULL );
            DisplayError( this,
                          _( "DRC error: this start point is inside or too close an other area" ) );
            return 0;
        }

        SetCurItem( zone );
        m_canvas->SetMouseCapture( Show_New_Edge_While_Move_Mouse, Abort_Zone_Create_Outline );
    }
    else    // edge in progress:
    {
        ii = zone->GetNumCorners() - 1;

        // edge in progress : the current corner coordinate was set
        // by Show_New_Edge_While_Move_Mouse
        if( zone->GetCornerPosition( ii - 1 ) != zone->GetCornerPosition( ii ) )
        {
            if( !Drc_On || !zone->IsOnCopperLayer() || ( m_drc->Drc( zone, ii - 1 ) == OK_DRC ) )
            {
                // Ok, we can add a new corner
                if( m_canvas->IsMouseCaptured() )
                    m_canvas->CallMouseCapture( DC, wxPoint(0,0), false );
                zone->AppendCorner( GetScreen()->GetCrossHairPosition() );
                SetCurItem( zone );     // calls DisplayInfo().
                if( m_canvas->IsMouseCaptured() )
                    m_canvas->CallMouseCapture( DC, wxPoint(0,0), false );
            }
        }
    }

    return zone->GetNumCorners();
}
Пример #8
0
int DRAWING_TOOL::drawZone( bool aKeepout )
{
    ZONE_CONTAINER* zone = NULL;
    DRAWSEGMENT line45;
    DRAWSEGMENT* helperLine = NULL;  // we will need more than one helper line

    // if one day it is possible to draw zones in the footprint editor,
    // then hereby I'm letting you know that this tool does not handle UR_MODEDIT undo yet
    assert( !m_editModules );

    // Add a VIEW_GROUP that serves as a preview for the new item
    KIGFX::VIEW_GROUP preview( m_view );
    m_view->Add( &preview );

    m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
    m_controls->ShowCursor( true );
    m_controls->SetSnapping( true );

    Activate();

    VECTOR2I origin;
    int numPoints = 0;
    bool direction45 = false;       // 45 degrees only mode

    // Main loop: keep receiving events
    while( OPT_TOOL_EVENT evt = Wait() )
    {
        bool updatePreview = false;            // should preview be updated
        VECTOR2I cursorPos = m_controls->GetCursorPosition();

        // Enable 45 degrees lines only mode by holding control
        if( direction45 != ( evt->Modifier( MD_CTRL ) && numPoints > 0 ) )
        {
            direction45 = evt->Modifier( MD_CTRL );

            if( direction45 )
            {
                preview.Add( &line45 );
                make45DegLine( helperLine, &line45 );
            }
            else
            {
                preview.Remove( &line45 );
                helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
            }

            updatePreview = true;
        }

        if( evt->IsCancel() || evt->IsActivate() )
        {
            if( numPoints > 0 )         // cancel the current zone
            {
                delete zone;
                zone = NULL;
                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );

                if( direction45 )
                {
                    preview.Remove( &line45 );
                    direction45 = false;
                }

                preview.FreeItems();
                updatePreview = true;

                numPoints = 0;
            }
            else                        // there is no zone currently drawn - just stop the tool
                break;

            if( evt->IsActivate() )  // now finish unconditionally
                break;
        }

        else if( evt->IsClick( BUT_LEFT ) || evt->IsDblClick( BUT_LEFT ) )
        {
            // Check if it is double click / closing line (so we have to finish the zone)
            if( evt->IsDblClick( BUT_LEFT ) || ( numPoints > 0 && cursorPos == origin ) )
            {
                if( numPoints > 2 )     // valid zone consists of more than 2 points
                {
                    assert( zone->GetNumCorners() > 2 );

                    // Finish the zone
                    if( direction45 )
                        zone->AppendCorner( cursorPos == origin ? line45.GetStart() : line45.GetEnd() );

                    zone->Outline()->CloseLastContour();
                    zone->Outline()->RemoveNullSegments();

                    m_board->Add( zone );
                    m_view->Add( zone );

                    if( !aKeepout )
                        static_cast<PCB_EDIT_FRAME*>( m_frame )->Fill_Zone( zone );

                    zone->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
                    m_board->GetRatsnest()->Update( zone );

                    m_frame->OnModify();
                    m_frame->SaveCopyInUndoList( zone, UR_NEW );

                    zone = NULL;
                }
                else
                {
                    delete zone;
                    zone = NULL;
                }

                numPoints = 0;
                m_controls->SetAutoPan( false );
                m_controls->CaptureCursor( false );

                if( direction45 )
                {
                    preview.Remove( &line45 );
                    direction45 = false;
                }

                preview.FreeItems();
                updatePreview = true;
            }
            else
            {
                if( numPoints == 0 )        // it's the first click
                {
                    // Get the current default settings for zones
                    ZONE_SETTINGS zoneInfo = m_frame->GetZoneSettings();
                    zoneInfo.m_CurrentZone_Layer = m_frame->GetScreen()->m_Active_Layer;

                    m_controls->SetAutoPan( true );
                    m_controls->CaptureCursor( true );

                    // Show options dialog
                    ZONE_EDIT_T dialogResult;

                    if( aKeepout )
                        dialogResult = InvokeKeepoutAreaEditor( m_frame, &zoneInfo );
                    else
                    {
                        if( IsCopperLayer( zoneInfo.m_CurrentZone_Layer ) )
                            dialogResult = InvokeCopperZonesEditor( m_frame, &zoneInfo );
                        else
                            dialogResult = InvokeNonCopperZonesEditor( m_frame, NULL, &zoneInfo );
                    }

                    if( dialogResult == ZONE_ABORT )
                    {
                        m_controls->SetAutoPan( false );
                        m_controls->CaptureCursor( false );
                        continue;
                    }

                    // Apply the selected settings
                    zone = new ZONE_CONTAINER( m_board );
                    zoneInfo.ExportSetting( *zone );
                    m_frame->GetGalCanvas()->SetTopLayer( zoneInfo.m_CurrentZone_Layer );

                    // Add the first point
                    zone->Outline()->Start( zoneInfo.m_CurrentZone_Layer,
                                            cursorPos.x, cursorPos.y,
                                            zone->GetHatchStyle() );
                    origin = cursorPos;

                    // Helper line represents the currently drawn line of the zone polygon
                    helperLine = new DRAWSEGMENT;
                    helperLine->SetShape( S_SEGMENT );
                    helperLine->SetWidth( 1 );
                    helperLine->SetLayer( zoneInfo.m_CurrentZone_Layer );
                    helperLine->SetStart( wxPoint( cursorPos.x, cursorPos.y ) );
                    helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
                    line45 = *helperLine;

                    preview.Add( helperLine );
                }
                else
                {
                    zone->AppendCorner( helperLine->GetEnd() );
                    helperLine = new DRAWSEGMENT( *helperLine );
                    helperLine->SetStart( helperLine->GetEnd() );
                    preview.Add( helperLine );
                }

                ++numPoints;
                updatePreview = true;
            }
        }

        else if( evt->IsMotion() && numPoints > 0 )
        {
            // 45 degree lines
            if( direction45 )
                make45DegLine( helperLine, &line45 );
            else
                helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );

            // Show a preview of the item
            updatePreview = true;
        }

        if( updatePreview )
            preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
    }

    m_controls->ShowCursor( false );
    m_controls->SetSnapping( false );
    m_controls->SetAutoPan( false );
    m_controls->CaptureCursor( false );
    m_view->Remove( &preview );

    m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );

    return 0;
}