void dx11ShaderOverride::terminateKey(MHWRender::MDrawContext& context, const MString& /*key*/)
{
if (fShaderNode) {
MHWRender::MRenderer* theRenderer = MHWRender::MRenderer::theRenderer();
if (theRenderer)
{
dx11ShaderDX11Device* dxDevice = (dx11ShaderDX11Device*)theRenderer->GPUDeviceHandle();
if (dxDevice)
{
ID3D11DeviceContext* dxContext = NULL;
dxDevice->GetImmediateContext(&dxContext);
if (dxContext)
{
fShaderNode->restoreStates(dxContext, fStates);
dxContext->VSSetShader(NULL, NULL, 0);
dxContext->PSSetShader(NULL, NULL, 0);
dxContext->GSSetShader(NULL, NULL, 0);
dxContext->HSSetShader(NULL, NULL, 0);
dxContext->DSSetShader(NULL, NULL, 0);
dxContext->Release();
}
}
}
}
}
void Shader::bind(D3DRenderer* renderer)
{
ID3D11DeviceContext* context = renderer->context();
context->IASetInputLayout(mpInputLayout);
context->IASetPrimitiveTopology(mPrimitiveTopology);
//Set any active shaders and disable ones not in use
context->VSSetShader(mpVertexShader, NULL, 0);
context->PSSetShader(mpPixelShader, NULL, 0);
context->GSSetShader(mpGeometryShader, NULL, 0);
context->CSSetShader(mpComputeShader, NULL, 0);
context->HSSetShader(mpHullShader, NULL, 0);
context->DSSetShader(mpDomainShader, NULL, 0);
}
const void ShaderClass::RenderShader(UINT indexCount, UINT indexStart)const
{
ID3D11DeviceContext* c = SystemClass::GetInstance()->mGrapInst->GetContext();
// Set the vertex input layout.
c->IASetInputLayout(mLayout);
// Set the vertex and pixel shaders that will be used to render this triangle.
c->VSSetShader(mVertexShader, nullptr, 0);
c->HSSetShader(mHullShader, nullptr, 0);
c->DSSetShader(mDomainShader, nullptr, 0);
c->GSSetShader(mGeometryShader, nullptr, 0);
c->PSSetShader(mPixelShader, nullptr, 0);
// Render mesh stored in active buffers
c->DrawIndexed(indexCount, indexStart, 0);
}
void FontShader::renderShader(int i_indexCount)
{
ID3D11DeviceContext* deviceContext = GraphicsDX::GetDeviceContext();
// Set the vertex input layout.
deviceContext->IASetInputLayout(_layout);
// Set the vertex and pixel shaders that will be used to render the triangles.
deviceContext->VSSetShader(_vertexShader, NULL, 0);
deviceContext->HSSetShader(nullptr, NULL, 0);
deviceContext->DSSetShader(nullptr, NULL, 0);
deviceContext->GSSetShader(nullptr, NULL, 0);
deviceContext->PSSetShader(_pixelShader, NULL, 0);
// Set the sampler state in the pixel shader.
deviceContext->PSSetSamplers(0, 1, &_sampleState);
// Render the triangles.
deviceContext->DrawIndexed(i_indexCount, 0, 0);
}
// WinMain
int APIENTRY _tWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow )
{
HRESULT hr;
// ウィンドウクラスを登録
WNDCLASSEX wcex = {
sizeof( WNDCLASSEX ), // cbSize
CS_HREDRAW | CS_VREDRAW, // style
WndProc, // lpfnWndProc
0, // cbClsExtra
0, // cbWndExtra
hInstance, // hInstance
NULL, // hIcon
NULL, // hCursor
( HBRUSH )( COLOR_WINDOW + 1 ), // hbrBackGround
NULL, // lpszMenuName
g_className, // lpszClassName
NULL // hIconSm
};
if ( ! RegisterClassEx( &wcex ) )
{
MessageBox( NULL, _T( "失敗: RegisterClassEx()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "RegisterClassEx: ok\n" ) );
// ウィンドウサイズを計算
RECT r = { 0, 0, 800, 450 }; // 800x450 (16:9)
if ( ! AdjustWindowRect( &r, WS_OVERLAPPEDWINDOW, FALSE ) )
{
MessageBox( NULL, _T( "失敗: AdjustWindowRect()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "AdjustWindowRect: ok (%d, %d)－(%d, %d)\n" ), r.left, r.top, r.right, r.bottom );
// ウィンドウ生成
HWND hWnd;
hWnd = CreateWindow( g_className,
g_windowName,
WS_OVERLAPPEDWINDOW,
CW_USEDEFAULT,
0,
r.right - r.left,
r.bottom - r.top,
NULL,
NULL,
hInstance,
NULL );
if ( hWnd == NULL )
{
MessageBox( NULL, _T( "失敗: CreateWindow()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "CreateWindow: ok\n" ) );
// ウィンドウ表示
ShowWindow(hWnd, nCmdShow);
dtprintf( _T( "ShowWindow: ok\n" ) );
// スワップチェイン設定
DXGI_SWAP_CHAIN_DESC scDesc = {
{
1280, // BufferDesc.Width
720, // BufferDesc.Height
{
60, // BufferDesc.RefreshRate.Numerator
1 // BufferDesc.RefreshRate.Denominator
},
DXGI_FORMAT_R16G16B16A16_FLOAT, // BufferDesc.Format
DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED, // BufferDesc.ScanlineOrdering
DXGI_MODE_SCALING_CENTERED // BufferDesc.Scaling
},
{
1, // SampleDesc.Count
0 // SampleDesc.Quality
},
DXGI_USAGE_RENDER_TARGET_OUTPUT, // BufferUsage
1, // BufferCount
hWnd, // OutputWindow
TRUE, // Windowed
DXGI_SWAP_EFFECT_DISCARD, // SwapEffect
DXGI_SWAP_CHAIN_FLAG_ALLOW_MODE_SWITCH // Flags
};
// Direct3D11 デバイス・デバイスコンテキスト・スワップチェーンを生成
ID3D11Device * pDevice = NULL;
ID3D11DeviceContext * pDeviceContext = NULL;
IDXGISwapChain * pSwapChain = NULL;
D3D_FEATURE_LEVEL feature;
hr = D3D11CreateDeviceAndSwapChain( NULL,
D3D_DRIVER_TYPE_HARDWARE,
NULL,
0,
NULL,
0,
D3D11_SDK_VERSION,
&scDesc,
&pSwapChain,
&pDevice,
&feature,
&pDeviceContext );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: D3D11CreateDeviceAndSwapChain()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "D3D11CreateDeviceAndSwapChain: ok (pDevice: 0x%p, pDeviceContext: 0x%p, pSwapChain: 0x%p, feature: 0x%4x)\n" ),
pDevice,
pDeviceContext,
pSwapChain,
( int ) feature );
// バックバッファテクスチャを取得
ID3D11Texture2D * pBackBuffer = NULL;
hr = pSwapChain->GetBuffer( 0, __uuidof( pBackBuffer ), reinterpret_cast< void ** >( &pBackBuffer ) );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: IDXGISwapChain::GetBuffer()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "IDXGISwapChain::GetBuffer: ok (pBackBuffer: 0x%p)\n" ), pBackBuffer );
// レンダーターゲットビューを生成
ID3D11RenderTargetView * pRenderTargetView = NULL;
hr = pDevice->CreateRenderTargetView( pBackBuffer, NULL, &pRenderTargetView );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateRenderTargetView()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateRenderTargetView: ok (pRenderTargetView: 0x%p)\n" ), pRenderTargetView );
// デプス・ステンシルバッファとなるテクスチャを生成
D3D11_TEXTURE2D_DESC depthStencilBufferDesc = {
1280, // Width
720, // Height
1, // MipLevels
1, // ArraySize
DXGI_FORMAT_D32_FLOAT, // Format
{
1, // SampleDesc.Count
0 // SampleDesc.Quality
},
D3D11_USAGE_DEFAULT, // Usage
D3D11_BIND_DEPTH_STENCIL, // BindFlags
0, // CPUAccessFlags
0 // MiscFlags
};
ID3D11Texture2D * pDepthStencilBuffer = NULL;
hr = pDevice->CreateTexture2D( &depthStencilBufferDesc, NULL, &pDepthStencilBuffer );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateTexture2D()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateTexture2D: ok (pDepthStencilBuffer: 0x%p)\n" ), pDepthStencilBuffer );
// デプス・ステンシルビューを生成
ID3D11DepthStencilView * pDepthStencilView = NULL;
hr = pDevice->CreateDepthStencilView( pDepthStencilBuffer, NULL, &pDepthStencilView );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateDepthStencilView()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateDepthStencilView: ok (pDepthStencilView: 0x%p)\n" ), pDepthStencilView );
// レンダーターゲットビューとデプス・ステンシルビューをバインド
ID3D11RenderTargetView * pRenderTargetViews[] = { pRenderTargetView };
pDeviceContext->OMSetRenderTargets( 1, pRenderTargetViews, pDepthStencilView );
dtprintf( _T( "ID3D11DeviceContext::OMSetRenderTargets: ok\n" ) );
// バックバッファはもうここでは使わない
COM_SAFE_RELEASE( pBackBuffer );
// ビューポートをバインド
D3D11_VIEWPORT viewport = {
0.0f, // TopLeftX
0.0f, // TopLeftY
1280.0f, // Width
720.0f, // Height
0.0f, // MinDepth
1.0f // MaxDepth
};
pDeviceContext->RSSetViewports( 1, &viewport );
dtprintf( _T( "ID3D11DeviceContext::RSSetViewports: ok\n" ) );
// 頂点データ
float vertices[ 8 ][ 7 ] = {
// Xaxis Yaxis Zaxis 赤 緑 青 Alpha
{ -0.5f, 0.5f, 0.5f, 0.0f, 0.0f, 0.0f, 1.0f }, // 手前左上
{ 0.5f, 0.5f, 0.5f, 0.0f, 0.0f, 1.0f, 1.0f }, // 手前右上
{ 0.5f, -0.5f, 0.5f, 0.0f, 1.0f, 0.0f, 1.0f }, // 手前右下
{ -0.5f, -0.5f, 0.5f, 0.0f, 1.0f, 1.0f, 1.0f }, // 手前左下
{ -0.5f, 0.5f, -0.5f, 1.0f, 0.0f, 0.0f, 1.0f }, // 奥左上
{ 0.5f, 0.5f, -0.5f, 1.0f, 0.0f, 1.0f, 1.0f }, // 奥右上
{ 0.5f, -0.5f, -0.5f, 1.0f, 1.0f, 0.0f, 1.0f }, // 奥右下
{ -0.5f, -0.5f, -0.5f, 1.0f, 1.0f, 1.0f, 1.0f } // 奥左下
};
// 頂点バッファを生成
D3D11_BUFFER_DESC vertexBufferDesc = {
sizeof( vertices ), // ByteWidth
D3D11_USAGE_DEFAULT, // Usage
D3D11_BIND_VERTEX_BUFFER, // BindFlags
0, // CPUAccessFlags
0, // MiscFlags
0 // StructureByteStride
};
D3D11_SUBRESOURCE_DATA vertexResourceData = { vertices };
ID3D11Buffer * pVertexBuffer = NULL;
hr = pDevice->CreateBuffer( &vertexBufferDesc, &vertexResourceData, &pVertexBuffer );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateBuffer()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateBuffer: ok (pVertexBuffer: 0x%p)\n" ), pVertexBuffer );
// 頂点バッファをバインド
UINT strides[] = { sizeof( float ) * 7 };
UINT offsets[] = { 0 };
pDeviceContext->IASetVertexBuffers( 0, 1, &pVertexBuffer, strides, offsets );
dtprintf( _T( "ID3D11DeviceContext::IASetVertexBuffers: ok\n" ) );
// インデックスデータ
unsigned int indices[] = { 0, 1, 2, 0, 2, 3, // 手前
4, 0, 3, 4, 3, 7, // 左
1, 5, 6, 1, 6, 2, // 右
0, 4, 5, 0, 5, 1, // 上
2, 6, 7, 2, 7, 3, // 下
5, 4, 7, 5, 7, 6
}; // 裏
// インデックスバッファを生成
D3D11_BUFFER_DESC indexBufferDesc = {
sizeof( indices ), // ByteWidth
D3D11_USAGE_DEFAULT, // Usage
D3D11_BIND_INDEX_BUFFER, // BindFlags
0, // CPUAccessFlags
0, // MiscFlags
0 // StructureByteStride
};
D3D11_SUBRESOURCE_DATA indexResourceData = { indices };
ID3D11Buffer * pIndexBuffer = NULL;
hr = pDevice->CreateBuffer( &indexBufferDesc, &indexResourceData, &pIndexBuffer );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateBuffer()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateBuffer: ok (pIndexBuffer: 0x%p)\n" ), pIndexBuffer );
// インデックスバッファをバインド
pDeviceContext->IASetIndexBuffer( pIndexBuffer, DXGI_FORMAT_R32_UINT, 0 );
dtprintf( _T( "ID3D11DeviceContext::IASetIndexBuffer: ok\n" ) );
// プリミティブタイプを設定
pDeviceContext->IASetPrimitiveTopology( D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST );
dtprintf( _T( "ID3D11DeviceContext::IASetPrimitiveTopology: ok\n" ) );
// 頂点シェーダ用の定数バッファを作成
D3D11_BUFFER_DESC VSConstantBufferDesc = {
sizeof( D3DXMATRIX ) * 3, // ByteWidth
D3D11_USAGE_DYNAMIC, // Usage
D3D11_BIND_CONSTANT_BUFFER, // BindFlags
D3D11_CPU_ACCESS_WRITE, // CPUAccessFlags
0, // MiscFlags
0 // StructureByteStride
};
ID3D11Buffer * pVSConstantBuffer = NULL;
hr = pDevice->CreateBuffer( &VSConstantBufferDesc, NULL, &pVSConstantBuffer );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateBuffer()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateBuffer: ok (pVSConstantBuffer: 0x%p)\n" ), pVSConstantBuffer );
// 定数バッファをバインド
pDeviceContext->VSSetConstantBuffers( 0, 1, &pVSConstantBuffer );
dtprintf( _T( "ID3D11DeviceContext::VSSetConstantBuffers: ok\n" ) );
// 頂点シェーダを作成
ID3D11VertexShader * pVertexShader = NULL;
hr = pDevice->CreateVertexShader( g_vs_perspective, sizeof( g_vs_perspective ), NULL, &pVertexShader );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateVertexShader()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateVertexShader: ok (pVertexShader: 0x%p)\n" ), pVertexShader );
// ピクセルシェーダを作成
ID3D11PixelShader * pPixelShader = NULL;
hr = pDevice->CreatePixelShader( g_ps_constant, sizeof( g_ps_constant ), NULL, &pPixelShader );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreatePixelShader()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreatePixelShader: ok (pPixelShader: 0x%p)\n" ), pPixelShader );
// シェーダをバインド
pDeviceContext->VSSetShader( pVertexShader, NULL, 0 );
dtprintf( _T( "ID3D11DeviceContext::VSSetShader: ok\n" ) );
pDeviceContext->PSSetShader( pPixelShader, NULL, 0 );
dtprintf( _T( "ID3D11DeviceContext::PSSetShader: ok\n" ) );
pDeviceContext->GSSetShader( NULL, NULL, 0 );
pDeviceContext->HSSetShader( NULL, NULL, 0 );
pDeviceContext->DSSetShader( NULL, NULL, 0 );
// 入力エレメント記述子
D3D11_INPUT_ELEMENT_DESC verticesDesc[] = {
{ "IN_POSITION", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
{ "IN_COLOR", 0, DXGI_FORMAT_R32G32B32A32_FLOAT, 0, sizeof(float)*3, D3D11_INPUT_PER_VERTEX_DATA, 0 }
};
// 入力レイアウトを生成
ID3D11InputLayout * pInputLayout = NULL;
hr = pDevice->CreateInputLayout( verticesDesc, 2, g_vs_perspective, sizeof( g_vs_perspective ), &pInputLayout );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateInputLayout()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateInputLayout: ok (pInputLayout: 0x%p)\n" ), pInputLayout );
// 入力レイアウトをバインド
pDeviceContext->IASetInputLayout( pInputLayout );
dtprintf( _T( "ID3D11DeviceContext::IASetInputLayout: ok\n" ) );
// ラスタライザステートを生成
D3D11_RASTERIZER_DESC rasterizerStateDesc = {
D3D11_FILL_SOLID, // FillMode
// D3D11_FILL_WIREFRAME, // FillMode (ワイヤーフレーム表示)
D3D11_CULL_BACK, // CullMode
// D3D11_CULL_NONE, // CullMode (カリングなし)
FALSE, // FrontCounterClockwise
0, // DepthBias
0.0f, // DepthBiasClamp
0.0f, // SlopeScaledDepthBias
TRUE, // DepthClipEnable
FALSE, // ScissorEnable
FALSE, // MultisampleEnable
FALSE // AntialiasedLineEnable
};
ID3D11RasterizerState * pRasterizerState = NULL;
hr = pDevice->CreateRasterizerState( &rasterizerStateDesc, &pRasterizerState );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateRasterizerState()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateRasterizerState: ok (pRasterizerState: 0x%p)\n" ), pRasterizerState );
// ラスタライザステートをバインド
pDeviceContext->RSSetState( pRasterizerState );
dtprintf( _T( "ID3D11DeviceContext::RSSetState: ok\n" ) );
// デプス・ステンシルステートを生成
D3D11_DEPTH_STENCIL_DESC depthStencilStateDesc = {
TRUE, // DepthEnable
D3D11_DEPTH_WRITE_MASK_ALL, // DepthWriteMask
D3D11_COMPARISON_LESS, // DepthFunc
FALSE, // StencilEnable
D3D11_DEFAULT_STENCIL_READ_MASK, // StencilReadMask
D3D11_DEFAULT_STENCIL_WRITE_MASK, // StencilWriteMask
{
D3D11_STENCIL_OP_KEEP, // FrontFace.StencilFailOp
D3D11_STENCIL_OP_KEEP, // FrontFace.StencilDepthFailOp
D3D11_STENCIL_OP_KEEP, // FrontFace.StencilPassOp
D3D11_COMPARISON_ALWAYS // FrontFace.StencilFunc
},
{
D3D11_STENCIL_OP_KEEP, // BackFace.StencilFailOp
D3D11_STENCIL_OP_KEEP, // BackFace.StencilDepthFailOp
D3D11_STENCIL_OP_KEEP, // BackFace.StencilPassOp
D3D11_COMPARISON_ALWAYS // BackFace.StencilFunc
}
};
ID3D11DepthStencilState * pDepthStencilState = NULL;
hr = pDevice->CreateDepthStencilState( &depthStencilStateDesc, &pDepthStencilState );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateDepthStencilState()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateDepthStencilState: ok (pDepthStencilState: 0x%p)\n" ), pDepthStencilState );
// デプス・ステンシルステートをバインド
pDeviceContext->OMSetDepthStencilState( pDepthStencilState, 0 );
dtprintf( _T( "ID3D11DeviceContext::OMSetDepthStencilState: ok\n" ) );
MSG msg;
while ( 1 )
{
// メッセージを取得
if ( PeekMessage( &msg, NULL, 0, 0, PM_REMOVE ) )
{
if ( msg.message == WM_QUIT )
{
dtprintf( _T( "PeekMessage: WM_QUIT\n" ) );
break;
}
// メッセージ処理
DispatchMessage( &msg );
}
else
{
HRESULT hr;
static unsigned int count = 0;
float theta = ( count++ / 200.0f ) * ( 3.141593f / 2.0f );
// World-View-Projection 行列をそれぞれ生成
D3DXMATRIX world, view, projection;
D3DXMatrixIdentity( &world );
const D3DXVECTOR3 eye( 1.8f * 1.414214f * -cosf( theta ), 1.8f, 1.8f * 1.414214f * sinf( theta ) );
const D3DXVECTOR3 at( 0.0f, 0.0f, 0.0f );
const D3DXVECTOR3 up( 0.0f, 1.0f, 0.0f );
D3DXMatrixLookAtRH( &view, &eye, &at, &up );
D3DXMatrixPerspectiveFovRH( &projection, 3.141593f / 4.0f, 1280.0f / 720.0f, 1.0f, 10000.0f );
// 頂点シェーダ用定数バッファへアクセス
D3D11_MAPPED_SUBRESOURCE mapped;
hr = pDeviceContext->Map( pVSConstantBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mapped );
if ( SUCCEEDED( hr ) )
{
D3DXMATRIX * mapped_m = static_cast< D3DXMATRIX * >( mapped.pData );
mapped_m[0] = world;
mapped_m[1] = view;
mapped_m[2] = projection;
// 後始末
pDeviceContext->Unmap( pVSConstantBuffer, 0 );
}
// レンダーターゲットビューをクリア
const float clear[ 4 ] = { 0.0f, 0.0f, 0.3f, 1.0f }; // RGBA
pDeviceContext->ClearRenderTargetView( pRenderTargetView, clear );
// デプス・ステンシルビューをクリア
pDeviceContext->ClearDepthStencilView( pDepthStencilView, D3D11_CLEAR_DEPTH | D3D11_CLEAR_STENCIL, 1.0f, 0 );
// 描画
pDeviceContext->DrawIndexed( 36, 0, 0 );
pSwapChain->Present( 1, 0 );
// ちょっとだけ待つ
Sleep( 5 );
}
}
// シェーダをアンバインド
pDeviceContext->VSSetShader( NULL, NULL, 0 );
pDeviceContext->PSSetShader( NULL, NULL, 0 );
// デバイス・リソース解放
COM_SAFE_RELEASE( pDepthStencilState );
COM_SAFE_RELEASE( pRasterizerState );
COM_SAFE_RELEASE( pInputLayout );
COM_SAFE_RELEASE( pPixelShader );
COM_SAFE_RELEASE( pVertexShader );
COM_SAFE_RELEASE( pVSConstantBuffer );
COM_SAFE_RELEASE( pIndexBuffer );
COM_SAFE_RELEASE( pVertexBuffer );
COM_SAFE_RELEASE( pDepthStencilView );
COM_SAFE_RELEASE( pDepthStencilBuffer );
COM_SAFE_RELEASE( pRenderTargetView );
COM_SAFE_RELEASE( pSwapChain );
COM_SAFE_RELEASE( pDeviceContext );
COM_SAFE_RELEASE( pDevice );
return msg.wParam;
}
/** Binds a pipeline-state */
void D3D11GraphicsEngineQueued::BindPipelineState(const PipelineState* state)
{
D3D11PipelineState* s = (D3D11PipelineState*)state;
D3D11PipelineState* b = (D3D11PipelineState*)BoundPipelineStateByThread[GetCurrentThreadId()];
ID3D11DeviceContext* context = GetDeferredContextByThread();
if(!b) b = (D3D11PipelineState*)&DefaultPipelineState;
// Bind state
if(b->BlendState != s->BlendState)
SC_DBG(context->OMSetBlendState(s->BlendState, (float *)&D3DXVECTOR4(0, 0, 0, 0), 0xFFFFFFFF), GothicRendererInfo::SC_BS);
if(b->SamplerState != s->SamplerState)
SC_DBG(context->PSSetSamplers(0, 1, &s->SamplerState), GothicRendererInfo::SC_SMPL);
if(b->DepthStencilState != s->DepthStencilState)
SC_DBG(context->OMSetDepthStencilState(s->DepthStencilState, 0), GothicRendererInfo::SC_DSS);
if(b->RasterizerState != s->RasterizerState)
SC_DBG(context->RSSetState(s->RasterizerState), GothicRendererInfo::SC_RS);
// Bind constantbuffers (They are likely to change for every object)
if(!s->ConstantBuffersVS.empty() && s->ConstantBuffersVS != b->ConstantBuffersVS)SC_DBG(context->VSSetConstantBuffers(0, s->ConstantBuffersVS.size(), &s->ConstantBuffersVS[0]),GothicRendererInfo::SC_CB);
if(!s->ConstantBuffersPS.empty() && s->ConstantBuffersPS != b->ConstantBuffersPS)SC_DBG(context->PSSetConstantBuffers(0, s->ConstantBuffersPS.size(), &s->ConstantBuffersPS[0]),GothicRendererInfo::SC_CB);
if(!s->ConstantBuffersHDS.empty() && s->ConstantBuffersHDS != b->ConstantBuffersHDS)SC_DBG(context->HSSetConstantBuffers(0, s->ConstantBuffersHDS.size(), &s->ConstantBuffersHDS[0]),GothicRendererInfo::SC_CB);
if(!s->ConstantBuffersHDS.empty() && s->ConstantBuffersHDS != b->ConstantBuffersHDS)SC_DBG(context->DSSetConstantBuffers(0, s->ConstantBuffersHDS.size(), &s->ConstantBuffersHDS[0]),GothicRendererInfo::SC_CB);
if(!s->ConstantBuffersGS.empty() && s->ConstantBuffersGS != b->ConstantBuffersGS)SC_DBG(context->GSSetConstantBuffers(0, s->ConstantBuffersGS.size(), &s->ConstantBuffersGS[0]),GothicRendererInfo::SC_CB);
// Vertexbuffers
UINT off[] = {0,0};
if(memcmp(s->BaseState.VertexBuffers, b->BaseState.VertexBuffers, sizeof(b->BaseState.VertexBuffers)) != 0)
SC_DBG(context->IASetVertexBuffers(0, s->VertexBuffers.size(), &s->VertexBuffers[0], s->BaseState.VertexStride, off), GothicRendererInfo::SC_VB);
if(!s->StructuredBuffersVS.empty() && memcmp(s->BaseState.StructuredBuffersVS, b->BaseState.StructuredBuffersVS, sizeof(b->BaseState.StructuredBuffersVS)) != 0)
SC_DBG(context->VSSetShaderResources(0, 1, &s->StructuredBuffersVS[0]), GothicRendererInfo::SC_VB);
if(s->IndexBuffer != b->IndexBuffer)
SC_DBG(context->IASetIndexBuffer(s->IndexBuffer, s->BaseState.IndexStride == 4 ? DXGI_FORMAT_R32_UINT : DXGI_FORMAT_R16_UINT, 0), GothicRendererInfo::SC_IB);
// Shaders
if(s->VertexShader != b->VertexShader)
SC_DBG(context->VSSetShader(s->VertexShader, NULL, NULL), GothicRendererInfo::SC_VS);
if(s->InputLayout != b->InputLayout)
SC_DBG(context->IASetInputLayout(s->InputLayout), GothicRendererInfo::SC_IL);
if(s->PixelShader != b->PixelShader)
SC_DBG(context->PSSetShader(s->PixelShader, NULL, NULL), GothicRendererInfo::SC_PS);
if(s->HullShader != b->HullShader)
SC_DBG(context->HSSetShader(s->HullShader, NULL, NULL), GothicRendererInfo::SC_HS);
if(s->DomainShader != b->DomainShader)
SC_DBG(context->DSSetShader(s->DomainShader, NULL, NULL), GothicRendererInfo::SC_DS);
if(s->GeometryShader != b->GeometryShader)
SC_DBG(context->GSSetShader(s->GeometryShader, NULL, NULL), GothicRendererInfo::SC_GS);
// Rendertargets
if(memcmp(s->RenderTargetViews, b->RenderTargetViews, sizeof(void*) * s->NumRenderTargetViews) != 0 ||
s->DepthStencilView != b->DepthStencilView)
SC_DBG(context->OMSetRenderTargets(s->NumRenderTargetViews, s->RenderTargetViews, s->DepthStencilView), GothicRendererInfo::SC_RTVDSV);
// Textures
if(memcmp(s->Textures, b->Textures, sizeof(void*) * s->BaseState.NumTextures) != 0)
SC_DBG(context->PSSetShaderResources(0, s->BaseState.NumTextures, s->Textures), GothicRendererInfo::SC_TX);
// Primitive topology
//Context->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST);
// Replace old state
// FIXME: Might not threadsave
BoundPipelineStateByThread[GetCurrentThreadId()] = s;
}
// WinMain
int APIENTRY _tWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow )
{
HRESULT hr;
// ウィンドウクラスを登録
WNDCLASSEX wcex = {
sizeof( WNDCLASSEX ), // cbSize
CS_HREDRAW | CS_VREDRAW, // style
WndProc, // lpfnWndProc
0, // cbClsExtra
0, // cbWndExtra
hInstance, // hInstance
NULL, // hIcon
NULL, // hCursor
( HBRUSH )( COLOR_WINDOW + 1 ), // hbrBackGround
NULL, // lpszMenuName
g_className, // lpszClassName
NULL // hIconSm
};
if ( ! RegisterClassEx( &wcex ) )
{
MessageBox( NULL, _T( "失敗: RegisterClassEx()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "RegisterClassEx: ok\n" ) );
// ウィンドウサイズを計算
RECT r = { 0, 0, 800, 450 }; // 800x450 (16:9)
if ( ! AdjustWindowRect( &r, WS_OVERLAPPEDWINDOW, FALSE ) )
{
MessageBox( NULL, _T( "失敗: AdjustWindowRect()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "AdjustWindowRect: ok (%d, %d)－(%d, %d)\n" ), r.left, r.top, r.right, r.bottom );
// ウィンドウ生成
HWND hWnd;
hWnd = CreateWindow( g_className,
g_windowName,
WS_OVERLAPPEDWINDOW,
CW_USEDEFAULT,
0,
r.right - r.left,
r.bottom - r.top,
NULL,
NULL,
hInstance,
NULL );
if ( hWnd == NULL )
{
MessageBox( NULL, _T( "失敗: CreateWindow()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "CreateWindow: ok\n" ) );
// ウィンドウ表示
ShowWindow(hWnd, nCmdShow);
dtprintf( _T( "ShowWindow: ok\n" ) );
// スワップチェイン設定
DXGI_SWAP_CHAIN_DESC scDesc = {
{
1280, // BufferDesc.Width
720, // BufferDesc.Height
{
60, // BufferDesc.RefreshRate.Numerator
1 // BufferDesc.RefreshRate.Denominator
},
DXGI_FORMAT_R16G16B16A16_FLOAT, // BufferDesc.Format
DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED, // BufferDesc.ScanlineOrdering
DXGI_MODE_SCALING_CENTERED // BufferDesc.Scaling
},
{
1, // SampleDesc.Count
0 // SampleDesc.Quality
},
DXGI_USAGE_RENDER_TARGET_OUTPUT, // BufferUsage
1, // BufferCount
hWnd, // OutputWindow
TRUE, // Windowed
DXGI_SWAP_EFFECT_DISCARD, // SwapEffect
DXGI_SWAP_CHAIN_FLAG_ALLOW_MODE_SWITCH // Flags
};
// Direct3D11 デバイス・デバイスコンテキスト・スワップチェーン生成
ID3D11Device * pDevice = NULL;
ID3D11DeviceContext * pDeviceContext = NULL;
IDXGISwapChain * pSwapChain = NULL;
D3D_FEATURE_LEVEL feature;
hr = D3D11CreateDeviceAndSwapChain( NULL,
D3D_DRIVER_TYPE_HARDWARE,
NULL,
0,
NULL,
0,
D3D11_SDK_VERSION,
&scDesc,
&pSwapChain,
&pDevice,
&feature,
&pDeviceContext );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: D3D11CreateDeviceAndSwapChain()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "D3D11CreateDeviceAndSwapChain: ok (pDevice: 0x%p, pDeviceContext: 0x%p, pSwapChain: 0x%p, feature: 0x%4x)\n" ),
pDevice,
pDeviceContext,
pSwapChain,
( int ) feature );
// バックバッファテクスチャ取得
ID3D11Texture2D * pBackBuffer = NULL;
hr = pSwapChain->GetBuffer( 0, __uuidof( pBackBuffer ), reinterpret_cast< void ** >( &pBackBuffer ) );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: IDXGISwapChain::GetBuffer()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "IDXGISwapChain::GetBuffer: ok (pBackBuffer: 0x%p)\n" ), pBackBuffer );
// レンダーターゲットビュー生成
ID3D11RenderTargetView * pRenderTargetView = NULL;
hr = pDevice->CreateRenderTargetView( pBackBuffer, NULL, &pRenderTargetView );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateRenderTargetView()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateRenderTargetView: ok (pRenderTargetView: 0x%p)\n" ), pRenderTargetView );
// レンダーターゲットビューをバインド
pDeviceContext->OMSetRenderTargets( 1, &pRenderTargetView, NULL );
dtprintf( _T( "ID3D11DeviceContext::OMSetRenderTargets: ok\n" ) );
// バックバッファはもうここでは使わない
COM_SAFE_RELEASE( pBackBuffer );
// ビューポートをバインド
D3D11_VIEWPORT viewport = {
0.0f, // TopLeftX
0.0f, // TopLeftY
1280.0f, // Width
720.0f, // Height
0.0f, // MinDepth
1.0f // MaxDepth
};
pDeviceContext->RSSetViewports( 1, &viewport );
dtprintf( _T( "ID3D11DeviceContext::RSSetViewports: ok\n" ) );
// 頂点データ
float vertices[ 5 ][ 7 ] = {
// Xaxis Yaxis Zaxis 赤 緑 青 Alpha
{ 0.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 1.0f }, // 原点
{ -0.5f, 0.5f, 0.5f, 1.0f, 0.0f, 0.0f, 1.0f }, // 左上
{ 0.5f, 0.5f, 0.5f, 1.0f, 1.0f, 0.0f, 1.0f }, // 右上
{ 0.5f, -0.5f, 0.5f, 0.0f, 1.0f, 0.0f, 1.0f }, // 右下
{ -0.5f, -0.5f, 0.5f, 0.0f, 1.0f, 1.0f, 1.0f } // 左下
};
// 入力エレメント記述子
D3D11_INPUT_ELEMENT_DESC verticesDesc[] = {
{ "IN_POSITION", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 },
{ "IN_COLOR", 0, DXGI_FORMAT_R32G32B32A32_FLOAT, 0, sizeof(float)*3, D3D11_INPUT_PER_VERTEX_DATA, 0 }
};
// 頂点バッファを生成
D3D11_BUFFER_DESC vertexBufferDesc = {
5 * sizeof( float ) * 7, // ByteWidth
D3D11_USAGE_DEFAULT, // Usage
D3D11_BIND_VERTEX_BUFFER, // BindFlags
0, // CPUAccessFlags
0, // MiscFlags
0 // StructureByteStride
};
D3D11_SUBRESOURCE_DATA vertexResourceData = { vertices };
ID3D11Buffer * pVertexBuffer = NULL;
hr = pDevice->CreateBuffer( &vertexBufferDesc, &vertexResourceData, &pVertexBuffer );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateBuffer()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateBuffer: ok (pVertexBuffer: 0x%p)\n" ), pVertexBuffer );
// 頂点バッファをバインド
UINT strides[] = { sizeof( float ) * 7 };
UINT offsets[] = { 0 };
pDeviceContext->IASetVertexBuffers( 0, 1, &pVertexBuffer, strides, offsets );
dtprintf( _T( "ID3D11DeviceContext::IASetVertexBuffers: ok\n" ) );
// インデックスデータ
unsigned int indices[] = { 0, 1, 2, 0, 2, 3, 0, 3, 4, 0, 4, 1 };
// インデックスバッファを生成
D3D11_BUFFER_DESC indexBufferDesc = {
sizeof( unsigned int ) * 12, // ByteWidth
D3D11_USAGE_DEFAULT, // Usage
D3D11_BIND_INDEX_BUFFER, // BindFlags
0, // CPUAccessFlags
0, // MiscFlags
0 // StructureByteStride
};
D3D11_SUBRESOURCE_DATA indexResourceData = { indices };
ID3D11Buffer * pIndexBuffer = NULL;
hr = pDevice->CreateBuffer( &indexBufferDesc, &indexResourceData, &pIndexBuffer );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateBuffer()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateBuffer: ok (pIndexBuffer: 0x%p)\n" ), pIndexBuffer );
// インデックスバッファをバインド
pDeviceContext->IASetIndexBuffer( pIndexBuffer, DXGI_FORMAT_R32_UINT, 0 );
dtprintf( _T( "ID3D11DeviceContext::IASetIndexBuffer: ok\n" ) );
// プリミティブタイプを設定
pDeviceContext->IASetPrimitiveTopology( D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST );
dtprintf( _T( "ID3D11DeviceContext::IASetPrimitiveTopology: ok\n" ) );
// 頂点シェーダを作成
ID3D11VertexShader * pVertexShader = NULL;
hr = pDevice->CreateVertexShader( g_vs_constant, sizeof( g_vs_constant ), NULL, &pVertexShader );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateVertexShader()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateVertexShader: ok (pVertexShader: 0x%p)\n" ), pVertexShader );
// ピクセルシェーダを作成
ID3D11PixelShader * pPixelShader = NULL;
hr = pDevice->CreatePixelShader( g_ps_constant, sizeof( g_ps_constant ), NULL, &pPixelShader );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreatePixelShader()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreatePixelShader: ok (pPixelShader: 0x%p)\n" ), pPixelShader );
// シェーダをバインド
pDeviceContext->VSSetShader( pVertexShader, NULL, 0 );
dtprintf( _T( "ID3D11DeviceContext::VSSetShader: ok\n" ) );
pDeviceContext->PSSetShader( pPixelShader, NULL, 0 );
dtprintf( _T( "ID3D11DeviceContext::PSSetShader: ok\n" ) );
pDeviceContext->GSSetShader( NULL, NULL, 0 );
pDeviceContext->HSSetShader( NULL, NULL, 0 );
pDeviceContext->DSSetShader( NULL, NULL, 0 );
// 入力レイアウトを生成
ID3D11InputLayout * pInputLayout = NULL;
hr = pDevice->CreateInputLayout( verticesDesc, 2, g_vs_constant, sizeof( g_vs_constant ), &pInputLayout );
if ( FAILED( hr ) )
{
MessageBox( NULL, _T( "失敗: ID3D11Device::CreateInputLayout()" ), _T( "エラー" ), MB_OK | MB_ICONERROR );
return 0;
}
dtprintf( _T( "ID3D11Device::CreateInputLayout: ok (pInputLayout: 0x%p)\n" ), pInputLayout );
// 入力レイアウトをバインド
pDeviceContext->IASetInputLayout( pInputLayout );
dtprintf( _T( "ID3D11DeviceContext::IASetInputLayout: ok\n" ) );
MSG msg;
while ( 1 )
{
// メッセージを取得
if ( PeekMessage( &msg, NULL, 0, 0, PM_REMOVE ) )
{
if ( msg.message == WM_QUIT )
{
dtprintf( _T( "PeekMessage: WM_QUIT\n" ) );
break;
}
// メッセージ処理
DispatchMessage( &msg );
}
else
{
// レンダーターゲットをクリア
const float clear[ 4 ] = { 0.0f, 0.0f, 1.0f, 1.0f }; // RGBA
pDeviceContext->ClearRenderTargetView( pRenderTargetView, clear );
// 描画
pDeviceContext->DrawIndexed( 12, 0, 0 );
pSwapChain->Present( 1, 0 );
// ちょっとだけ待つ
Sleep( 5 );
}
}
// シェーダをアンバインド
pDeviceContext->VSSetShader( NULL, NULL, 0 );
pDeviceContext->PSSetShader( NULL, NULL, 0 );
// デバイス・リソース解放
COM_SAFE_RELEASE( pInputLayout );
COM_SAFE_RELEASE( pPixelShader );
COM_SAFE_RELEASE( pVertexShader );
COM_SAFE_RELEASE( pIndexBuffer );
COM_SAFE_RELEASE( pVertexBuffer );
COM_SAFE_RELEASE( pRenderTargetView );
COM_SAFE_RELEASE( pSwapChain );
COM_SAFE_RELEASE( pDeviceContext );
COM_SAFE_RELEASE( pDevice );
return msg.wParam;
}
